How To Properly Use A Manual Video Tile Cutter

Instructions: how to use a tile cutter, 3 main rules How to use a tile cutter is a pressing issue. When using this tool, you need to be extremely careful not to harm yourself or spoil the tiles.

Safety rules when working with the tool

Each tool has its own safety, which must be observed without fail in order to exclude unpleasant consequences, such as deformation of the phalanges of the fingers and the like.

How To Properly Use A Manual Video Tile Cutter

Safety regulations:

  1. Before direct work, it is imperative to carry out a thorough inspection of the tool for faults, since this can cause both breakdown and accident.
  2. Before cutting the tiles, you need to make a couple of idle movements to make sure they are smooth and free of jolts.
  3. Pay attention to the tubular guides, which should be as clean as possible. It is especially important that they are free of dirt. If there is contamination, then it is necessary to eliminate them, as well as traces of the solution with which the treatment is carried out. To make the device work as efficiently as possible, it is worth treating the parts with machine oil.
  4. It is necessary to inspect the cutting disc itself, since it should be in perfect condition, not bent, but rotation without fluctuations and along one axis. There should be no difficulties and obstacles in rotation, as well as additional whistle.
  5. To avoid injury, it is worth wearing special glasses and gloves.
  6. Experts recommend checking the water supply to the disc before work, which will ensure quick work.

Cutting starts only after the disc has reached maximum speed.

How to use a manual tile cutter

How to work correctly during construction and finishing work with ceramic tiles?

Need to:

  • Be neat;
  • Think carefully about every step;
  • Use special cutting attachments.

You need to cut the tiles with a special tile cutter, a feature of which is the presence of a sharp cutter. As a rule, it is set with a diamond, as it is a more durable and wear-resistant material. In order to cut it, it is necessary to lay the blade on the base of the device so that the blade does not sway during cutting, and the cut is not made according to the previously drawn mowing line.

Over, the device is perfect for home use. It is worth noting that handheld equipment has a number of advantages over an electric tool. It is small and much easier to handle. Over, it is considered the safest.

Recommendations: how to properly cut tiles with a tile cutter

The instructions for the tile cutter do not contain special instructions on which professional training should be, and the work is carried out quickly and easily. However, it is worth following the recommendations from the manufacturer so that even such a simple moment as a tile cut is as correct as possible and without oversights.

Instructions:

  1. The tool must be placed on a flat, stable surface. It must be solid.
  2. It is imperative to check how sharp the cutter is, as well as the fastening strength of each element.
  3. When cutting tiles, the order of work must be followed. Namely, on the front side of the tile, a fishing line is initially drawn along which the cut will be made. It is enough to use a pencil or marker and a ruler.
  4. The tile is installed on the base of the tile cutter.
  5. The tool must be set perpendicular to the working surface. To do this, you need to place a strong emphasis on the far corner of the device, and then correct the position of the canvas, be sure to take into account the mark made earlier.
  6. It is important to remember that the reference point is taken on the central line located on the working surface of the unit.
  7. Next, using the handle, the cutter is brought to the tile.
  8. It should be installed on the edge of the product, the one that is closer to the master.
  9. Then the handle is pressed firmly so that the cutter touches the tile surface. Thus, it will be sandwiched between the metal part and the rollers in the equipment.
  10. To make a cut, it is enough to make a sharp and clear movement. Through it, a small groove is made from oneself to the opposite edge of the canvas.
  11. After that, in order to break off the cut part of the tile, you need to press its handle and the blade will be broken along the previously drawn mowing line.

Thus, you can cut a tile and get two even parts of the product. The cutting line will be clear and without chipping, which will allow you to carry out repair work efficiently and without defects.

Instructions: how to use a tile cutter, 3 main rules Rules: how to work with a tile cutter and why you need it

Some people think that using a roller tile cutter is possible without preliminary preparation and even trivial reading of the instructions.

What can be the consequences:

  1. Illiterately cut part of the tile.
  2. Security breach.
  3. Damage to health, in particular to the upper limbs.

If we consider in more detail the moment for which a tile cutter is needed, then at first glance this is the simplest device, which is not difficult to use and does not require professional special education. Hand tools are considered more convenient for use at home, since electrical ones are too difficult to work with.

Electric and manual tile cutters have the same names, but different purpose and method of operation. The only exception is the final result. An electric tool has a sharper cutter and it is impossible for them to make a simple groove, as it cuts quickly and sharply. Electric cutters are either mains or battery powered, and some may resemble circular saws in appearance. In addition, when working with a power tool, there is the possibility of significant injury, since the diamond blade has too high a rotation speed.

How to use a manual tile cutter

A manual tile cutter is used much more often than an electric one, and we are talking not only about living conditions, but also about industrial ones. At first, the process of cutting tiles may seem complicated and almost impossible to carry out, but in reality it is only necessary to research the instructions and safety recommendations. There are many nuances in functioning, but all of them are not difficult to remember and one should not forget about them when working. Safety rules are considered especially important, and even more than the observance of the stage-by-stage work.

How to use a manual tile cutter correctly

Before how to use a manual tile cutter, it is necessary to check its condition, all parts must be undamaged, the cutting wheel must rotate without jamming. Its surface must be of the correct round shape, without burrs and dents. The movement of the carriage with it should also be carried out without jerking and jamming. As a rule, for these purposes, a radial bearing is provided in the design of a manual tile cutter. It is also worth checking the condition of the bed; before working with the tile cutter, it is necessary to clean its surface from visible dirt.

  1. The tile surface is marked with an ordinary construction pencil according to the required dimensions.
  2. The tile is positioned on the bed of the cutter so that the marked line of the cut coincides with the trajectory of the carriage on which the cutter roller is fixed. It is important that the distance to the cut from the edge of the tile is at least 10 mm, otherwise you will get a sloppy edge.
  3. The carriage is guided along the line with slight pressure. It is important at the moment to feel the required amount of pressure so as not to push through the tile, but also to get a cut of the required depth so that the glaze of the tile is cut. It is allowed to run the roller over the tile surface only once, otherwise the cut may turn out to be uneven.
  4. Now the handle of the tile cutter turns to the working position, the field of which is lowered with a sharp and confident movement, as a result, the tile is gently broken along the previously obtained cut.

Experts advise to soak ceramic tiles in water before cutting. A drop of machine oil applied along the mowing line of the cut will also make the cut easier. You can also read an article on how to cut tiles with and without a tile cutter.

READ  How To Properly Wind The Line On A Lawn Mower

And for a more detailed analysis of the use of a manual tile cutter, I recommend looking (using the Walmer tile cutter as an example).

And one more thing (for example, the RUBI TX-N tile cutter).

It will be convenient to work with a manual tile cutter if the volume of work is not too large, and the hardness of the tile is small or medium. For sturdier tiles, consider using an electric tile cutter.

Design fundamentals and technological capabilities

Tile cutter This is a generalized name for building tools for straight, curved or even curved tile cutting. The classification of the variety of these tools is based on the type of driving motion. So, tile cutters can be:

  1. Manual;
  2. Mechanized or electric.

Manual tile cutter consists of a base. Beds, carriages with a roller and a handle. It resembles an ordinary glass cutter in its principle of operation; the cutting roller is used to cut the glaze of the tile. At this moment, it is clamped in the body according to the principle of pliers. Once the glaze is cut, the tiles break off along it. To obtain a smoother and more accurate cut, guides are used that expose the tile clamping field. Sometimes manual tile cutter the tabletop version can be used to produce round holes.

Electric tile cutter a device equipped with an electric drive that drives the diamond cutting disc in rotation. The principle of operation of this version of the tile cutter is similar to a circular saw; ceramic tiles move along the guide to obtain an even and accurate cut. One of the varieties of a mechanized tile cutter is a tape cutter, equipped with a diamond tape. To cool the tiles, water is supplied to the cutting area, which also rinses off the cutting products.

In order to properly cut ceramic tiles, you need to know how to use the tile cutter correctly.

How to use a tile cutter: instructions for the user

Renovations often involve installing ceramic tiles in the kitchen, bathroom and toilet. The main task is to carefully glue it to the wall or floor so that you get a flat surface, without drops and pits. This will require a building level, as well as tile cutter, with which it is necessary to cut the tiles exactly to size.

How to use an electric tile cutter correctly

The use of a more technologically advanced electric tile cutter device allows you to get a very neat cut with somewhat rounded and smooth edges. Sharp edges, which are obtained when working with a manual tile cutter, when cutting ceramic tiles with an electric device. It also allows you to cut pieces of tiles less than 5 millimeters wide.

The technology for cutting tiles on an electric tile cutter looks like this:

  1. Before how to use the tile cutter, it is necessary to mark the tiles.
  2. Place the tiles on the cutter table along the adjusted guide.
  3. Turn on the rotation of the diamond blade and supply water to it.
  4. Gently slide the tile towards the disc with both hands. At the moment the tile is brought under the disc, the pressing force on it should be minimal. After cutting, it can be increased slightly. If you press too hard on the tiles while cutting in, strong vibrations can occur and the tiles will crack. When the diamond wheel comes out during the completion of cutting, it is necessary to also reduce the pressure force so that chips and irregularities do not form.
  5. Get a neat cut and set the tiles aside.
  6. Turn off blade rotation and water supply.

When working with an electric tile cutter, it is worth considering the recommendations of specialists. It is important that during the operation the tile is neatly and evenly pressed against the table of the tile cutter, otherwise vibrations will appear. Also, uneven tile placement on the table can cause the blade to jam in the center of the tile, or to catch the tile with the disc, resulting in an inaccurate cut that is not directed along the mowing line. To accurately move the tile, you must use the guides, and also press on the tile with both hands, if you press on it with one hand, you can also get an uneven cut.

Do not forget to periodically change the water in the tank, as all cutting products, dust and larger particles of tiles get into it. They can lead to contamination of the diamond disc and subsequent galling, which in the worst case can lead to breakage of the disc or tile. Breakage of the disc when the tile cutter drive is on is dangerous in terms of injury to the worker. If you see that the disc is unnecessarily dirty or worn out, then you should replace it with a new one. This will give you a clean and smooth cut.

And for consolidation you can see how to use an electric tile cutter for example Caliber PLE-200 900.

Tool description

The tool is a huge base (bed) on which the guides are fixed. A carriage with a cutting roller slips along them (as with a glass cutter). Having made a furrow on the tile, you press on it with some kind of stop, and the blade begins to crack along your mowing line.

It would seem that everything is very easy and understandable. However, even after studying the correct instructions, many good craftsmen do not realize the first time how to work with this tool and perform high-quality repairs. Experience will come sooner or later, but its value will be determined by the number of damaged tiles.

How to use a manual tile cutter, roller tile cutter

It is not possible to select a tile size so that the final row is whole segments. Before the advent of a good tool, many methods were invented, how to evenly break tiles along a certain mowing line, a glass cutter, and a victory drill, and two blocks squeezed in a vice were used.

We cut the tile with a grinder or a hacksaw for metal (in a unique way along the surface). All the same, the percentage of marriage was simply enormous.

Finally, a tool called tile cutter became available to all craftsmen, the instruction to which gives a complete idea of ​​how to handle it.

Basic rules on how to use a tile cutter

First, let’s study the material part. There are many varieties of this tool. They are created for different types and sizes of tiles, and most importantly, for different volumes of work.

Electric tabletop tile cutter.

  • This tool is like a circular saw attached to certain rails. A cutting table with special clamps is laid out under it.
  • The tile is fixed at the required angle, and you just pass it around it with a circular. Of course, some cutting discs are used (most often diamond-coated).
  • The rotation speed is quite serious, thanks to this, the cut comes out even and practically without chips. Some models use liquid cooling. Even the coated tile looks quite presentable in the cut part.
  • Allows cutting with millimeter precision. With this tool, you can cut a strip of a couple of millimeters (mechanical tile cutters cannot do this). Another difference with a disk cutter is that you can cut a groove.
  • There are two main drawbacks: huge price and restrictions on the size of the workpiece. Can be used at home, although this tile cutter is for special construction crews.

Electric stationary tool.

In fact, it is a tile cutting machine.

  • The functions are almost the same as for the tabletop unit. Only the functions and quality of work are better. The cutting table is designed to fit any tile size, including porcelain stoneware flooring for huge areas. A better engine has been installed to help cut on tiles of any thickness.
  • Besides the unaffordable price, this machine will take up a lot of space. Therefore, it is used only by construction organizations at large facilities.
  • Remember! For all its advantages, the electric circular cutter is designed for linear cutting only. Cut the curved line, or make a hole.

Mechanical manual machine.

  • If you are repairing a house (of course, by yourself), or building a stone house, you cannot do without this tool. It can be rented, but its low cost makes this tile cutter affordable.
  • Let’s take a closer look at this technique. Working as a manual tile cutter is difficult, despite the simplicity of the design. Actually, you can not become a glazier immediately, you need a skill.
  • The most important rule is not to be afraid to crush the tile during the passage of the video. Most of the destroyed workpieces are the result of a poorly drawn furrow.

Tile cutting by hand machine.

You should not assume that you will be offered a complete instruction like a funny treatise: How to drive a nail with high quality. Having learned the technology of manual tile cutting, you can start working with the lowest percentage of scrap.

Common problems and solutions

To wet or not to wet? Good craftsmen recommend soaking the tile before cutting, for an hour. If you don’t have a tub of the right size, just put the ceramics in a bucket of water. Large floor panels can be wrapped with a wet cloth.

Moisture-impregnated ceramics will not crumble along the edges of the cut, the fracture will be clean.

READ  How To Turn On A Bosch Speaker

Cut by yourself or by yourself? The roller carriage moves away from itself in a rapid motion. Preliminarily, the tile rests against the retaining knot without backlash and simple substrates. It is necessary to start from the very edge, part of the cut should not be shorter than the tile. You need to press hard to accurately cut the glaze layer. The movement must be fast and smooth. Before starting work, craftsmen are advised to practice on destroyed blanks. It is better to spoil one sheet of paper than to constantly break expensive material during work. How to break a furrow? At the end of the cut, we will bring the stop in the form of an inverted tick to the working position and press it sharply on the plate. The workpiece will break exactly along the cut (provided that the furrow is deep).

Cutting porcelain stoneware with a tile cutter.

In fact, porcelain stoneware in processing is no more difficult than ceramics. Difficulty in workpiece thickness and dimensions. The slab is most often 50×50 or 60×60 centimeters. To work, you need a tile cutter with the correct bed size and a sturdy cutting roller, preferably with a diamond coating. The rest of the technique will not change.

How to properly cut tiles with a manual tile cutter

In order to start using a hand tool, you do not need to take any courses or receive any special training. First of all, you need to place the tool on a perfectly flat surface and, very importantly, on a hard surface. Then it is necessary to check the sharpness of the cutter and how firmly all the main elements of the operated tool were fixed.

So, the tile needs to be cut according to the following instructions. At the same time, it is very important to follow the order in order to complete the work efficiently and quickly. You can also learn more about how to use the tile cutter from the topic posted on our website.

  1. On the front side of the tile, you need to draw a cut line. To do this, use a sharp pencil or marker, do not forget about the ruler.
  2. After that, you need to bring the tile to the surface of the manual tile cutter, which is called the working one.
  3. Align the instrument clearly perpendicularly. To do this, you need to rest hard enough on the far side of the tile cutter, and then carefully adjust the position of the tile used, taking into account the marks that you made on its surface in advance. At the same time, do not forget that you need to focus on the central line, which is located at the base of the tool.
  4. Use the handle to guide the cutter to the tile. It must be installed on the very edge of the product on the side that is closer to you.
  5. After that, you need to press the handle hard enough so that the cutter can touch the tile. Therefore, the tile must be pressed down with the metal part and the cutter rollers.
  6. Then, with just one movement, which should be quite sharp and clear, you need to draw a small furrow from you to the outer edge of the tile you are cutting.
  7. As a result, in order to break the tile being processed, you need to slightly press the handle and the tile will break directly along the mowing line that you cut.

Thus, with the help of a manual tile cutter, you can get two pieces of tiles of the size you need, which will have perfectly flat and incredibly neat edges at the break.

Devices and principle of operation of a manual tile cutter

The most important feature of this tool is that it has an incredibly sharp incisor. As a rule, a diamond cutter is used, which has the same principle of operation as a simple cutter. For correct and complete operation, it is necessary to install the processed tile directly on the base of the device. To ensure that the tile does not wobble and can be easily and evenly cut, there is a clamping part at the bottom of the manual tile cutter, which allows you to firmly fix the tile.

On this clamping part of the tool there is a cutter and several rollers that allow the tile cutter to move along the surface of the material. There is also a small handle on the carriage. It is she who is responsible for the different force of the onslaught on the tile and directly on the displacement of the cutter during operation.

Due to the fact that during the use of the tool there are no difficulties, it is very often used both in construction and in repair work that is carried out at home. A manual tile cutter has the advantage when compared to an electric tool, because it is small in size, in a short time the tool allows you to make an extremely straight cut on the tile.

If you consider that you need to cut very strong materials or too much tile, then in such a situation, a hand tool may not be enough. Of course, a huge role in this situation is played by the skills of the person and the manufacturer of this or that instrument.

What is a tile cutter and why is it needed

Many people have no idea what a tile cutter is or why such a tool is needed at all. If we consider this issue in more detail, then this is the most common apparatus that allows you to quickly and accurately cut ceramic tiles. Today, both manual and electric tools are actively used in construction. It is worth noting that it is possible to easily cope with the operation only in the case of using a manual tile cutter, but some difficulties may arise with the electric option.

Even if we consider that both types of instruments have the same name, they are not at all similar to each other. The only exception, of course, is the final result of the tool. In order to be able to use a manual tile cutter, you need to make grooves with it (the unit has very sharp incisors), and then break the tile. In turn, the electric type of tile cutter works with the help of a battery or from an electrical network, and in its appearance and in the principle of operation, it may slightly resemble a circular saw. The tiles are cut with a very sharp diamond blade, which has an incredibly high rotation speed.

How to use a manual tile cutter

In order to perfectly cut ceramic tiles, in most cases a hand tool is used as a tile cutter. Mostly, to use it, you do not need to have professional skills, so the tool can be used quite successfully at home.

The manual tile cutter has quite a lot of positive points, which include simple use, as a result, a very clear cut is obtained. The handle additionally also performs the function of a lever allowing to reduce the applied forces to a minimum.

At the same time, it was not about Bosch without some negative points. For example, a manual tile cutter cannot be used very close to the edge of a tile (the allowable distance for work must be at least five millimeters).

Before starting work, you must carefully learn how to use the manual tile cutter. If you have any difficulties in this matter, then on our website you can find where all the details and nuances are indicated.

Safety rules when working with a tile cutter

In order to use a manual tile cutter it was as safe as possible and at the same time the result of the work was of high quality, you need to follow some safety rules, namely:

  • Before starting work, it is imperative to inspect the tool used so that you can identify all breakages and irregularities in the guides in time, then find and eliminate visible damage to the tile cutter.
  • It is necessary to walk a couple of times on the tile with no load, and at the same time all movements must be smooth, without any jolts.
  • Do not forget to additionally check the tubular guides, they must be perfectly clean, free of dust and dirt. Remove pieces of tiles, traces of mortar from them and, as a result, lubricate with a small amount of machine oil to improve performance.
  • In addition, you also need to pay attention to the cutting disc itself. Its condition should be ideal, in no case bent, and rotation around the axis of the attachment should occur without any difficulties. It should be noted that during the operation of the manual tile cutter, there should also be no extraneous sounds.
  • In order not to get any injuries, it is best to work with special glasses and gloves.
  • Some experts also recommend testing the water supply on the disc, which makes the job easier.
  • It is necessary to start work only after the disk picks up those revolutions that can be called maximum.

Lately, many people have asked how to use a manual tile cutter how to use it correctly, but in fact there is nothing complicated in this process. Every inexperienced beginner can handle the job. If, nevertheless, you cannot cut off the piece of tile you need, then on our website you will find with the most detailed instructions that will allow you to find out all the details and nuances of this type of work. Do not forget about the safety rules, because your health and, of course, safety largely depends on this.

READ  How To Repair A Petrol Cutter

How to cut tiles with a manual stationary tile cutter

Manual stationary tile cutter is the most common tool for high-quality cutting of tiles and porcelain stoneware among professionals and those who have decided to carry out repairs with their own hands.

The complete set of the manual tile cutter, which is presented below, includes a bed, a carriage with a cutting wheel and, of course, a handle.

Many people wonder: How to use a manual tile cutter?

So, the technology of working with such a tool is impossibly simple: initially, a marking of the future cut is made on the surface of the tile with a pencil. Then the tile is placed on the surface of the bed so that the markings coincide with the direction of movement of the cutting wheel, and an incision is made under slight pressure. At this point, it is important to feel the force of pressure so as not to crush the tile and at the same time make a notch groove of such a depth that would be sufficient for a subsequent break along this notch.

Remember, the cutting motion should only be done once, otherwise the cutting edge may be uneven.

Next, the handle of the tile cutter must be turned into an active (for breaking) state and, with a quick, confident movement, break the tile along a fresh cut. An experienced craftsman will do this with one clap of his hand, correctly calculating the effort. It should be noted that the cut parts must be at least 10 mm in width, otherwise high-quality cutting will not work.

When working with a manual stationary tile cutter, it is important to pay attention to the fixation and condition of the cutting wheel: it must rotate easily and be level. The movement of the carriage with a cut-off roller should be smooth, excluding jerks, for this purpose it is equipped with a bearing. The base of the device must be clean and level, and the handle must be free of mechanical damage.

To facilitate the breaking of the tile, experts soak it in water before cutting, and a drop of machine oil, which is applied to the line of the intended cut, will greatly simplify the cutting.

Using a hand-held stationary tile cutter for cutting hard and thick ceramics is effective for medium-sized jobs. In general, working on an instrument of this type with the existing skills is not difficult.

How to cut with a roller tile cutter

A roller tile cutter is the most primitive and not very convenient way to cut tiles and not very hard and dense ceramics.

The cutting process itself involves marking the surfaces of the tiles with a soft pencil of the mowing line. Then place the tiles on a board or flat plywood and make one cut. To do this, press down evenly on the tile cutter, making a deep groove from one edge of the tile to the other.

To neatly divide the tile into two, just place it on the nails and press down a little.

It should be noted that the glass cutter, the instruction of which describes all the features of the process of cutting ceramic tiles, is suitable exclusively for cutting piece material.

  1. Tile cutting as part of tiling
  2. Tile cutting with electric tile cutter
  3. How to cut tiles with a manual stationary tile cutter
  4. How to cut with a roller tile cutter
  5. How to use the tile cutter
  6. Cutting curly edges and oblique lines

Tile cutting with electric tile cutter

There is no doubt that electric tile cutter with a diamond disc is the highest quality and most efficient way to cut tiles, stone and porcelain stoneware of any hardness, shape and even thickness, and its use guarantees a perfectly straight and clean cut with slightly rounded and smooth edges, unlike sharp ones, which are formed as a result of using a simple tile cutter. Equipped with an electric tile cutter, additionally equipped with nippers, you will be able to make flawless shaped cutouts and tiles less than 5 mm.

Another indisputable advantage of this type of equipment is the cleanliness of the working process due to equipping the tool with a pallet with water, where dust and the smallest particles of tiles enter at the time of operation.

Regardless of the design features of an electric tile cutter, the cutting technology is the same: traditionally, the machine consists of a platform, a diamond-coated disc attached to it and a tray with water, which is fed to the knife during operation, thereby abundantly wetting it. Due to this, the amount of dust emitted is noticeably reduced, the service life of the diamond disc is increased, and the tile itself does not crack.

The speed of cutting a tile is comparable to the speed of cutting a log with a conventional saw, but in this case you have to move the tile under the disc, not the knife under the tile.

The force of pressing on the tile is determined by the density of the tile and the material from which the knife blade is made. It should be remembered that at the moment when the knife blade barely touches the tile being processed, the pressure should be minimal, as the blade moves through the tile, it increases and decreases again towards the end of the operation. When cutting, the tile should be well fixed to the table, this will help to avoid vibration and reliably protect the blade from jamming in the center of the tile.

It should be noted that experts advise changing the water in the pan as often as possible, because together with the slab chips that have got into it, it is fed to the knife, and this can lead to serious damage to the blade.

A safe option would be to press the tiles with your hands from both sides at the same time, because if the tile tilts to one side, the edges of the cut will turn out to be uneven and with fragments, or the disc will completely tighten the tile, throwing it to the side.

Since working with an electric tile cutter is dangerous, it is recommended to wear protective glasses and ear muffs against strong noise.

The saw blade can withstand a thousand cuts in wet cutting conditions. Blades occasionally clogged with ceramic debris require cleaning. To do this, it is enough to saw through a worn out sand mold for bricks or make cuts in a grinding stone for ceramic tiles. You can choose another way to remove the blade, unfold it and rotate it in the opposite direction. And only if the wear of the blade is great, you can replace it.

The question of the advisability of buying a professional electric tile cutter, practice and experience for working on it are extremely important, each user decides individually. At the same time, I would like to note that it is very effective for large volumes of work, and its only drawback is its high price.

How to use a tile cutter with tongs

Cutting with a hand-held tile cutter requires little work and easy cuts. This inexpensive, small-sized device will allow you to do a given amount of work without much effort at home.

Cutting begins with a traditional line, which is followed by a cutting wheel mounted on a pliers. The tile cutter is equipped with a slightly larger circle than a conventional glass cutter, allowing a deeper cut in the ceramic tile. For breaking, forceps should be brought to the edge of the tile. Place a wide plate of tongs forming a small angle on the face of the tile, and place the central part along the mowing line of the bend over the made furrow. By carefully squeezing the ceramic product with tongs, excess parts are broken off.

Such devices are certainly better than a glass cutter, but it is extremely difficult to cut thin strips with their help.

Tile cutting as part of tiling

Laying ceramic tiles on a floor or wall surface only in rare cases does without cutting it, much more often the master keeps a tile cutter at the ready, which he can use at any time during the facing work.

So, our article is especially for those who are currently engaged or are just planning to cover surfaces with ceramic tiles, but have not yet decided on the choice of the most suitable tile cutter model and does not know the correct cutting technology.

It is known that glazed ceramic tiles are made of fired clay, covered with a layer of glaze on top. The technology for the production of ceramic tiles is very simple: the clay is shaped and dried to fix the volume. After applying the glaze, the product is fired in the oven, due to which it acquires special strength, durability and a beautiful aesthetic appearance. In finished form, as you yourself know, the tile is not subject to deformation and bending, although it is very fragile and pricks easily.

All these properties and characteristics of the tile become the head of the choice of a certain method of cutting it. Let’s dwell in more detail on the basic methods of cutting ceramic tiles and talk about how to use a tile cutter at home for small amounts of work.