How to properly wind the line on the reel of a lawn mower

Spool Trimmer Heads

The main elements of the trigger is the mowing head, which is a cylindrical body with a bobbin inserted inside. The fishing line (cord) is tucked into it. The heads differ from each other in the way of feeding and threading the cord. There are three types of heads in total:

  • Automatic. The line is then fed as the user decreases the engine speed. Automatic cord feeding is very convenient when there is a lot of work to be done. The disadvantage of such a head is the high thread consumption.
  • Semi-automatic. The use of such a head does not require the user to perform any complex manipulations. The principle of its operation is designed in such a way that the line begins to automatically lengthen while the trimmer is operating at full speed. You just need to lightly bang the head of the machine on the ground (this will remove the blocking of the line), and the cord will be pulled out of the bobbin due to centrifugal force. Then the line is cut to the required length with a knife, which is located on the protective cover.
  • Manual. To lengthen the cord, it is necessary to stop the apparatus. After that, the line will need to be pulled out manually.

properly, wind, line, reel, lawn

Types of trimmer spools

If you have a summer cottage or a large plot of land near your individual house or cottage, then for the convenience of cleaning grass and weeds, you need to use a lawn mower. In case you are thinking of choosing an electric lawn mower or a gasoline one, then click here and you will find comparative characteristics of different models.

Over time, the line on the mower wears out and needs to be replaced. you can do this yourself. The choice of this polyethylene thread is necessary depending on the model of the mower. It is also worth keeping an eye on the rest of the unit’s details, here, for example, you will find information about Craftsman lawn mower knives, which also wear out and can lead to irreversible consequences.

The device of the reel into which the fishing line is inserted is very simple. But it differs depending on whether the coil is operating with one or two tendrils of thread. It is important to observe safety precautions when changing the line in the reel.

Which line to choose to refuel the lawn mower

The thickness of the polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. She may be:

  • with a round cross section. this is the most durable material for mowing grassy plants;
  • with a curly section. used for mowing soft plants;
  • twisted. used for thin grass;
  • professional type, not suitable for all models of equipment.

To change the line on a lawn mower, you need to purchase a cutting thread that will be ideal for the type of mower.

You can soak the thread in a bowl of water for a few minutes to increase elasticity and strength.

Second winding method

  • A previously prepared segment of six meters in length must be bent exactly in the middle and cut. Thus, two segments of the same length are obtained.
  • At one end of each segment, you need to make a small “hook”. To do this, it is necessary to bend a couple of centimeters from the edge and fix it for a short time so that the “hook” does not unbend.
  • Then one segment is taken. The hook is inserted into the through hole at the top of the bobbin.
  • Now you can proceed to the key stage. winding. The direction in which to wind is indicated by an arrow on the bobbin. It is important to ensure that the line is wound strictly within the upper part of the reel. You do not need to wind the thread to the very tip. about fifteen centimeters should remain free from the end.
  • In the upper edge of the spool there are small recesses (so-called grooves) for fixing the consumable. The loose “tail” of the thread must be inserted into one of these grooves.
  • The top of the coil is tucked in. Now you need to do the same procedure with the bottom. Take the second piece of thread. The “hook” is threaded through the through hole at the bottom of the bobbin.
  • After that, you can start winding the fishing line (within the lower compartment). And for this segment, you also need to leave about fifteen centimeters free from the end. This remaining “tail” must be inserted into the notch opposite to the one into which the end of the first segment was inserted.

The subsequent steps for this type of coils are exactly the same as described for the previous type in paragraphs five to nine.

This is how the line in the trimmer spool changes. There is nothing complicated in the process. And after several refueling operations, all actions will come to automatism.

To visually study the process described above, you can turn to the Internet for help. On the popular YouTube portal there are many different videos showing how to wind the line on the trimmer reel.

How to wind the line onto the trimmer spool

At first glance, threading a line into the reel of a tool is not an easy task. But it is enough to carefully study this process. and in the future all the necessary actions will be performed without any difficulties.

It is worth reading this guide to find out how to tuck the line into the trimmer. The step-by-step instructions below take into account the peculiarities of the spools of different types of trimmers, therefore, it is applicable to any tool.

So, the procedure is as follows.

  • The line spool is the bottom end of the trimmer. First of all, of course, you need to remove this head from the device. To do this, you need to fix the rod (or, in other words, the shaft) on which the coil is attached. It is required to fix it in such a way that it does not scroll. The easiest way to do this is by placing a kind of stupor (preferably metal) between the shaft threads through a special hole. When the shaft is fixed, the spool can be unscrewed.
  • At this stage, you have to remove the bobbin from the head, on which the fishing line is attached. To do this, you need to disassemble the head into elements. To do this, you first need to find a retainer on its body. It is located on the circumference of the product and is like a button. When the latch is found, you need to press it firmly. Keeping the latch pressed, turn the head cover clockwise. Then you need to remove the cover and remove the bobbin.
  • A tight spring is placed between the bobbin and the head. It needs to be put aside for a while so that it does not interfere with the winding process. Before proceeding with the step of winding the line, it is necessary to inspect the bobbin. If there are remnants of old fishing line on it, they must be removed. When the bobbin is cleaned, you can start preparing a new bobbin.
  • From a previously prepared skein of new fishing line, it is necessary to measure and cut off six (maximum. seven) meters. Keep the bobbin close at hand.

At this point, the key stage actually begins, which this article is devoted to.

Coil with two working tendrils

In this type of spool, you should determine the number of grooves for winding the line, lying on the inside of the spool:

  • one groove. both antennae are wound together in one groove;
  • two grooves. each antenna is wound on an individual groove.

For both cases, a line with a length of 2-3 m is taken.In single-groove reels, the line is pulled into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the opposite direction of rotation of the bobbin on the rod side. inside the arrow usually indicates the correct direction of winding. If there are fixing grooves, the ends of the fishing line are threaded through them or held with the fingers of the free hand, they are threaded into the through hole of the outer half of the bobbin, the spool is closed and attached to the trimmer bar.

The difference in line winding in double-groove spools is that initially a 2-5 m long line segment is folded in half (to determine the middle fold), and the fold loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along its own groove, fixing the antennae and assembling the coil is similar to the above option with one groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but with time and experience this task will be solved much faster and easier.

The video below will clearly show how to thread the line into the trimmer spool and wind it correctly. this operation is not difficult and with some patience it will certainly be crowned with success:

Features of the use of trimmers

A trimmer that mows grass with a fishing line can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, row spacing in a garden plot.

Such a convenient, and most importantly, effective device like a trimmer exists in several variations:

As the names suggest, trimmer types differ markedly from one another. But regardless of the type of this tool, a fishing line can be its cutting element. Of course, the line tucked into the trimmer reel is not endless. And sooner or later you will need to replace it with a new one.

Line consumption directly depends on the frequency of use of the device and the scale of the work performed. The more grass is cut and the more often it is trimmed with the trimmer, the more active the line is used in it. And, accordingly, the faster it will end. In this regard, the question arises: how to thread the line into the trimmer spool?

Not everyone knows the answer to this question. But the winding of the line on the reel plays an important role in the trimmer operation. For the device to function properly, it is very important to properly wind the new line onto the reel. How to change the line on the trimmer, and will be discussed in this article.

We carry out the winding of the fishing line

Slowly completed disassembly of the spool-spool without losing its spare parts allows you to proceed to the main task. winding fishing line into the reel. Technological features of the spool design and the number of working antennae determine the sequence of actions.

How to wind the line onto the trimmer spool

At first glance, threading a line into the reel of a tool is not an easy task. But it is enough to carefully study this process. and in the future all the necessary actions will be performed without any difficulties.

It is worth reading this guide to find out how to tuck the line into the trimmer. The step-by-step instructions below take into account the peculiarities of the spools of different types of trimmers, therefore, it is applicable to any tool.

So, the procedure is as follows.

  • The line spool is the bottom end of the trimmer. First of all, of course, you need to remove this head from the device. To do this, you need to fix the rod (or, in other words, the shaft) on which the coil is attached. It is required to fix it in such a way that it does not scroll. The easiest way to do this is by placing a kind of stupor (preferably metal) between the shaft threads through a special hole. When the shaft is fixed, the spool can be unscrewed.
  • At this stage, you have to remove the bobbin from the head, on which the fishing line is attached. To do this, you need to disassemble the head into elements. To do this, you first need to find a retainer on its body. It is located on the circumference of the product and is like a button. When the latch is found, you need to press it firmly. Keeping the latch pressed, turn the head cover clockwise. Then you need to remove the cover and remove the bobbin.
  • A tight spring is placed between the bobbin and the head. It needs to be put aside for a while so that it does not interfere with the winding process. Before proceeding with the step of winding the line, it is necessary to inspect the bobbin. If there are remnants of old fishing line on it, they must be removed. When the bobbin is cleaned, you can start preparing a new bobbin.
  • From a previously prepared skein of new fishing line, it is necessary to measure and cut off six (maximum. seven) meters. Keep the bobbin close at hand.

At this point, the key stage actually begins, which this article is devoted to.

Line device in the mower

The device of the element on which the nylon thread is wound is very simple. This element is called a coil. It has two “tracks”. the upper and the lower. Between these tracks there is a special partition with a recess. A fishing line is wound on these tracks. It must first be pulled through the recess.

In order to be able to pull out the coil without obstacles, it is necessary to unscrew the special button, which is located on the mower body.

Features of replacing the fishing line on video.

Which line to choose to refuel the lawn mower

The thickness of the polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. She may be:

How to Refill Trimmer Line : Lawn Care & Power Tools

  • with a round cross section. this is the most durable material for mowing grassy plants;
  • with a curly section. used for mowing soft plants;
  • twisted. used for thin grass;
  • professional type, not suitable for all models of equipment.

To change the line on a lawn mower, you need to purchase a cutting thread that will be ideal for the type of mower.

You can soak the thread in a bowl of water for a few minutes to increase elasticity and strength.

Device in the mower

In the trimmer, the element on which the string is pulled is very simple. It is called the “coil”. Usually it consists of an upper and a lower part (grooves), between which there is a partition with a recess. It is on these grooves that the fishing line should be wound. However, first it is pulled through the recess.

Before removing the coil, unscrew the special button located directly on the mower body. Remove the reel from the mower before changing the line.

It is not difficult to do this, but there are some peculiarities depending on the trimmer configuration and the coil itself.

In small electronic mowers, the motor and reel are at the bottom, and buttons are located on the sides of the reel. If you press them, you get the upper groove of the reel and the part where you need to wind the fishing line.

In bent-arm mowers that do not have a knife, the reels have special two-horned nuts. In such tools, you must hold the bobbin so that it does not move, and at the same time turn the nut clockwise. It is she who holds the entire reel, which is then easy to remove.

Straight arm mowers that can be fitted with a blade have a hole just below the reel. To remove the coil, a screwdriver is inserted into this hole, while the bobbin is fixed. After that, you need to turn the coil clockwise and remove it from the unit.

Sometimes there may be latches on the coil in the form of latches. They must be pressed to separate the parts of the coil. It is also possible that the top and bottom of the bobbin are connected by a thread. In this case, it is enough to grasp the top and bottom with your hands, and then twist in different directions until they unscrew.

Replacement instructions. how to insert the line

It should be noted that the reels in mowers can be different:

  • for functioning with one antenna;
  • for functioning with two antennae;
  • the line must be threaded through the through hole, which is located inside the element.

And do not confuse this part with an extension cord for a lawn mower on a reel, because despite the similar name, these are two completely different elements.

The mini chainsaw is designed for light work and people who prefer to hold the device with one hand.

This article will tell you about how much the ZIL 130 dump truck weighs and what this transport is capable of.

Read here //machinspec.com/lesozagotovitelnaya/benzopila/stanok-dlya-zatochki.html how to assemble a machine for sharpening chainsaws with your own hands quickly and easily.

In the first option, winding the cutting element is very simple:

  • There is a locking tab on the inside of the spool element.
  • One tendril of thread is inserted into it.
  • It is necessary to thread the nylon thread in the direction opposite to the rotation of the spool element.
  • You will need only 2 to 4 meters of fishing line. When the winding process is completed, put the small end of this cutting element outward and fix it in the groove, which is necessary for fixing the fishing line so that it does not unwind during the operation of the mower.
  • If there is no special groove, then the end should be held by hand so that the cutting element does not unwind during further assembly of the element.
  • At the last stage, it is necessary to thread the outer end of the thread into a special hole located on the outer part of the element. The spool can then be inserted into the mower.

When the roller is working with both ends of the plastic filament, then the following steps must be taken to thread the line into the mower:

  • Inside, on the spool, you will see how many slots there are for winding (two or one). If there is one groove, then both ends of the thread will be guided through this groove. If there are two of them, then the antennae are laid out separately. each in its own notch.
  • It is necessary to unwind from 2 to 4 meters of polyethylene thread and thread its two ends into the hole.
  • Wind both threads in the opposite direction to the rotation of the drum.
  • When all the line is wound, the ends should be fixed in the grooves or held by hand.
  • Both ends are threaded into the eyelet from the outside of the roller housing.
  • The drum is then collected and inserted into the mower.

Tips and steps for changing the line on video.

To insert line into a lawnmower that has two grooves on the spool, you must use the previous threading method for this polyethylene thread. In this case, each of the ends of the line will be wound along its own groove. All other actions are similar to the previous process.

The spool element or roller can have a completely different design from the previous two options. The line can be threaded through the eyelet, which is through and is located inside the reel. In this case, you do not need to disassemble the roller drum and manually wind the polyethylene thread.

The polyethylene thread is threaded through the hole and rotated by pressing a special button. This button is located on the body and is intended for the operation of the equipment so that it is possible to release the line as it wears out.

Do not worry that the polyethylene thread will wind in the wrong direction, since in this design it can only rotate in one direction.

In the version with two grooves

The line is first folded in half to determine where the middle of the fold is.

Further, the loop formed at the bend is threaded into the groove, which is formed between the two grooves.

Installing Trimmer Line. Husqvarna Trimmer

After that, you can wind both bars of the fishing line in a separate groove.

You can fix the mustache and assemble the coil completely in the same way as described above.

Opening a reel for the first time and winding a new line is not always easy. Over time, this procedure becomes almost automatic and will not take much time. Some reels have an automatic system that spins the line by itself. As a result, it remains only to correctly set the end of the line, and you’re done. In such models, the string must be put into the hole that is on the outside of the body. Next, the bobbin is assembled, and when the winding rotates, the fishing line is put on it.

Features of the use of trimmers

A trimmer that mows grass with a fishing line can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, row spacing in a garden plot.

Such a convenient, and most importantly, effective device like a trimmer exists in several variations:

As the names suggest, trimmer types differ markedly from one another. But regardless of the type of this tool, a fishing line can be its cutting element. Of course, the line tucked into the trimmer reel is not endless. And sooner or later you will need to replace it with a new one.

Line consumption directly depends on the frequency of use of the device and the scale of the work performed. The more grass is cut and the more often it is trimmed with the trimmer, the more active the line is used in it. And, accordingly, the faster it will end. In this regard, the question arises: how to thread the line into the trimmer spool?

Not everyone knows the answer to this question. But the winding of the line on the reel plays an important role in the trimmer operation. For the device to function properly, it is very important to properly wind the new line onto the reel. How to change the line on the trimmer, and will be discussed in this article.