How to put a blade on a trimmer. How to insert a knife into a handmade knife?

How to install a knife on a trimmer

With the advent of the summer of many owners of personal plots, the question is disturbed by knitted with how to put a knife on trimmer. The questions are no less relevant why and when it is advisable to replace the trimmer line on the motorcycle with a more durable cutting element. In our article, we will try to disassemble all this and give useful recommendations to summer residents.

Trimmer It is most convenient to use with a knife installed on it for a more comfortable mowing of high and loaded grass in the country. The trimmer line on the motorcycle is in such cases does not cope. Thin torn very quickly. Using Tolstoy 2.3 mm cord or homemade rods with cables forces the vegetation to wind up on the rogue. This increases the load on the engine. As a result, the piston group and other mobile units of the unit wear out very quickly.

If the mowing of a weeds is produced by an electric trimmer without a knife, only with a trimmer line, even a thick with a figure section, the problem cannot be solved. There is always a risk of overheating the electric motor and disable flexible shaft. And it’s all in a large torque of the electric motor. The grass wound on a spindle creates strong resistance to the shaft resembling a speedometer cable that does not withstand and twist.

In order to protect the equipment from premature wear, manufacturers have provided the ability to install special knives on trimmers. The design and shape of existing cutting elements allows you to easily cope not only with coarse and outgrown with grass, but also to successfully fight the young shrub.

Rules for the operation of a trimmer

Before starting a haircut or other care procedures, you need to read the user guide. It indicates what nozzles a particular device has, how to collect them and why use. Some manufacturers also tell the tricks that will help make a haircut or shaving professionally. In general, the rules for using the trimmer alone for all devices.

• Before starting work, you need to clearly decide what hair length is needed, and which nozzle is suitable for this.
• The minimum length of the machine is given when working without nozzles. In this case, the cutting edge must be leaded close to the roots of the hair.
• Haircut is carried out against hair growth.

Before starting work, you need to choose a nozzle

Which knife for a trimmer is better to choose? Review of possible options

Manufacturers produce several varieties of cutting elements for motorcycle. It all depends on the type of device. It is customary to distinguish between consumables:

Which material for a trimmer knife is better

The purpose of the consumable determines the material: iron or plastic. The choice of one or another option is determined by several factors:

Important: metal mills are never installed on network braids. The power of the device is not enough for a full torque. Therefore, he appeared an alternative. Plastic. Features of the design of the electric format motokos simply do not allow metal knives to work adequately:

Plastic blades are used only on devices with flexible hoses. Plastic copes with fine grass, dry areas and burdocks. If the wrong disk was accidentally installed, look further: how to change the disk to the reel on the trimmer.

Metal cutters. It is used for mowing thick, dense grass, small trees. The properties of the disc for a trimmer allow you to install it in the fight against shrubs.

Technical and external characteristics that indicate that you need exactly an iron tip:

• Straight bar, respectively. The length of the device itself increases;
• Comfortable handles for control of a scythe;
• Setting a smooth turnover of the blade.

Tip: for mowing a large territory with different types of grass and shrubs, gasoline units are well suited. They need to install a metal disk with sharp knives on them.

How many blades should be

The form does not affect the efficiency of the blade as their total number. For example, for the future hay it is worth taking a mill for 6-8 blades. With an amount of 2-4, the grass is mowing “into the meat”, and you will not fall any drows. For young trees, blades with many small teeth are great (look in stores with winning elements. Also a great option).

Knives for benzoocos are Natural in different ways: on one or both sides. Dumb or spent option increases fuel consumption and works inefficiently.

Important: try not to work with blades in areas with stones, brick. The only hit of the blade on the solid edge can break it can break it. Worse, if part of the pebble flies away in your direction. Be carefull!

How to change the nozzle to a trimmer? The element should be selected on the basis of dimensions, material and design. Also FOCUS on the format of work and the area that you will mow. The instructions from the tool will help you partially. Manufacturers indicate which knife what territory your equipment will process. Well, we go to how to put a knife on a trimmer correctly.

How to sharpen a knife for a meat grinder?

Sharpening with a bar for kitchen knives On a flat surface, place the bar. Put on it Knife meat grinder and start to quickly rotate it in circular movements of your hands. A prerequisite is constant uniform pressure on knife. Usually 2-3 minutes is enough for sharpening.

• Check that your meat grinder Disabled from the network.
• Insert a removable working block into a suitable nest on your body meat grinders.
• Insert and fix the screw according to the instructions, put on it a knife with an acute edge out.
• Then install the right grille
• Twist the ring nut.

How to install a saw disc for a trimmer

The main working organs of any trimmer are a coil with a trimmer line or a special disk (plastic or metal). You can mow green grassy plants with a plastic knife, like a trimmer line, with metal. Dry grass, reeds and even shrubby. Is it possible to increase the functionality of the trimmer by installing a saw disk on it?

Installation of a diamond disk

This operation externally is no different from fastening the typical disk, except that even more attention, accuracy and thoroughness of control is required. Remove the coil with a trimmer line, blocking the gearbox shaft with a special pin or a suitable screwdriver in diameter, rotating the container for the trimmer line counterclockwise. We try on the diamond disk to the lower slotted puck and convince that its landing hole is more than the diameter of the landing belt on the puck. At high speeds, the saw disk can shift, an imbalance will occur, which will inevitably lead to a breakdown of the tool and even the wound of the operator or people nearby. We try on alternately compensating washers and select that of them that fits the width and completely selects the gap between the landing site of the saw disk and the centering belt of the lower washer. We install a lower goal with a compensation ring, a diamond disk, an upper puck and a protective cup, which still partially redistributes the press force to a large area to a large area. The entire resulting package on the gearbox shaft is pulled together by a nut with left.Handed thread first by hand, and then by the end key, blocking the gearbox shaft with the help of a suitable screwdriver. Remove the protective cut plastic tube from the teeth and once again check the strength of the fastening of the saw disk on the gearbox shaft. If it turned out to be reliable, then a trimmer, with an installed diamond disk, is completely ready, both for traditional and not intended for this tool, work.

Testing in practice

For safety, you need to put on a protective helmet with a transparent shot to protect your face, gloves on your hands. First, we try to remove thin dry branches, gradually moving to larger ones, and finish testing dry and semi-dry trunks of trees with a diameter of 7-8 cm. We are convinced that a trimmer with a diamond disk works quite efficiently, reliably and safe. Slices, both transverse and oblique, are very smooth. They are not visible crumpled and torn fibers of wood. To mow grass with a diamond disk is also quite comfortable, effective and productively, regardless of its height, density and degree of dryness. So, a trimmer with a saw disk not only perfectly performs its direct functions (Kosba of grass), but also expands the scope (removal of knots and branches from trees, and cutting out of non.Weed trunks). Attention! You should not get involved in the installation of large diameter and thickness of saws on the trimmer, since this will cause an increase in the load on the gearbox and the engine, and the possible premature breakdown. The safety of work with such a tool will also decrease, which cannot be allowed in any case.

How to put a disk on a benzoca

With the advent of the summer of many owners of personal plots, the question is disturbed by a knitted for the purpose of putting a knife on a trimmer. The questions are more burning, why and when it is purposeful to replace the trimmer line on the motorcycle with a stronger cutting element. In our article, we will try to make out this and give useful advice to summer residents.

The trimmer with a knife installed on this address is most conveniently used for a more comfortable mowing of the highest and coarse weeds in the country. A trimmer line on a motorcycle in this version does not cooperate. Narrow in a short time vomit. The implementation of Tolstoy 4.5.3 mm cord or homemade rods with cables forces the vegetation to wind up on the rogue. This increases the load on the engine. Due to a short time, a piston group and the remaining movable units of the unit wear out.

If the mowing of a weeds is created by an electronic trimmer without a knife, only with a trimmer line, even a thick with a figure section, the work cannot be solved. There is always a risk of overheating the electric motor and disable flexible shaft. And the case to our client remains in a large rotating moment of the electronic motor. The grass wound on a spindle makes strong resistance to the shaft resembling a speedometer cable that does not withstand and twist.

In order to protect the equipment from early wear, domestic manufacturers have provided the possibility of installing special knives on trimmers. The design and shape of the existing cutting parts allows you to easily be controlled not only with the coarse and outgrown with the grass, but also to additionally beat the young bushes of it successfully.

Before taking and put We find out on a motorcycle knife what they are and where they are used. Now domestic manufacturers offer the consumer many types of these consumables. The entire cutting tool created for mowing grass is completely systematized:

During the engine breakdown (this is approximately the work of the trimmer with 2-3 tanks) the amount of oil can be increased. For example, mix it with gas in a ratio of 30: 1.

A small amount of oil mixed with gasoline increases the wear of the piston-cylinder group. Excess oil in the mixture, although not so fatal, but also harmful. True of piston rings can lead to the Rapid formation of soot in the combustion chamber, a drop in engine power.

Gasoline used in a motorcycle. AI 92. The brand of gasoline is clearly indicated in the operating instructions. Do not try to “force” the engine by pouring the 95th gasoline into it. This can lead to overheating, unstable work of the trimmer and breakdown.

It is not recommended to leave fuel in the trimmer tank during a long break. It is better to finish the working day, having completely worked out the entire mixture. Failure to fulfill this requirement will lead to clogging of the carburetor currents, since the engine gas will evaporate during the night and leave a thin layer of oil. This will cause difficulties the next engine start.

Precautions should also be observed when storing fuel. Many people fill gasoline into a plastic bottle of water. Is it worth it?

Model designation

Uses a clear division of branded mowing products into unprofessional and professional. This characteristic determines the resistance of the tool for wear and the final service life. With the right operating mode, a travo.Canine can effectively work out 10 years or more. If household modification is used to solve commercial purposes, the resource laid down by the manufacturer may run out after 1-2 years.

If you do not know how to choose a Husqvarna trimmer with a suitable working potential, read the target gradation of models in the table below:

Pay special attention to the numerical labeling of benzomotor products. Here the second and third numbers in the name are as close as possible to the actual volume of the cylinder

The larger the number, the more manufacturing and functional the unit.

The deep meaning is also laid in each letter, which stands after the numerical designation:

• “R”. Universal trimmers with a large bicycle handle, straight bar and gearbox, which are optimized for various braids;
• “L” is a straight bar, a loop.Shaped front handle and basic equipment for a mowing with a polymer cord or plastic knives;
• “C”. A curved bar;
• “K”. A detachable bar and shaft;
• “X”. Increased performance and adaptation to large volumes of work in difficult conditions;
• “I” and “Li”-a battery tool with lithium-ion battery.

It is important to consider that a grass-shaped travo with a D-shaped handle (marking with the letter “l”) despite excellent maneuverability and controllability when mowing a polymer cord, it is not recommended for joint use with a metal knife or disk. This is explained by rigid safety requirements

The operator simply will not be able to hold the tool in his hand with a sharp rebound of the headset from an unforeseen solid obstacle, such as stone. This possibility is provided only by a bicycle handle with two widely placed holders.

Rules for replacing knives on a trimmer for grass

If the disk on the trimmer is used regularly, it needs to be removed from time to time to remove and sharpen or change it to a new. This part can be made of metal or plastic, have a different number of blades, but the replacement process remains the same. Over, this procedure is similar to the equipment of different manufacturers, whether Carver or Huter, but minor differences are possible. Changing the knife on the trimmer is quite simple if you observe safety precautions and know the correct procedure for which you can find a description of which you can in the user’s instructions. The whole process of replacing step by step, as well as the way of independent sharpening of knives, will be described in this material.

When using motorcycles in summer cottages, the most popular nozzle is a trimmer line. It has a small price, suitable for different trimmer heads, is safe when working. The minus of the application of the trimmer line is that it is convenient only for the bevel of low shoots. In other situations, the string is immediately clogged, regardless of whether the gasoline or electric model of the trimmer is used. In addition, vegetation is wound on a spindle, which creates significant resistance on the shaft and leads to its breakdown. It can also provoke a failure of the piston system in benzocos or burning out the motor in electrimmers.

Therefore, for mowing high or hard vegetation, various nozzles are used. So, for harvesting tall and rough grass, thin shoots of trees and shrubs install and better use a disk. This nozzle clogs much less often, which contributes to the greater wear resistance of technology.

On a note! Due to the fact that the engine of electrical and battery models is less powerful than on benzocos, so the use of discs is more relevant for gasoline braids.

Learning to properly wind the trimmer line on the coil of the trimmer and benzo.Coat instructions for installation

Owners of private houses know how necessary such a type of tool as a trimmer is. It can be gasoline and electric, and they differ in the design of power units. For injection of grass in areas where there are stones, trees and other obstructing objects, trimmer line is used as a cutting device. This consumable in the process of use wears out, therefore, how to wind the coil of the trimmer, we will consider in detail in the material.

Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers with motorcycles (from 2.4 to 3. 2 mm).

The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind a trimmer coil, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the step.By.Step instructions for replacing the trimmer line in the coil of the trimmer.

Testing in practice

For safety, you need to put on a protective helmet with a transparent shot to protect your face, gloves on your hands. First, we try to remove thin dry branches, gradually moving to larger ones, and finish testing dry and semi-dry trunks of trees with a diameter of 7-8 cm.

We are convinced that a trimmer with a diamond disk works quite efficiently, reliably and safe. Slices, both transverse and oblique, are very smooth. They are not visible crumpled and torn fibers of wood. To mow grass with a diamond disk is also quite comfortable, effective and productively, regardless of its height, density and degree of dryness. So, a trimmer with a saw disk not only perfectly performs its direct functions (Kosba of grass), but also expands the scope (removal of knots and branches from trees, and cutting out of non.Weed trunks). Attention! You should not get involved in the installation of large diameter and thickness of saws on the trimmer, since this will cause an increase in the load on the gearbox and the engine, and the possible premature breakdown. The safety of work with such a tool will also decrease, which cannot be allowed in any case.

We finish the work

Then the remaining end of the trimmer line is threaded into the hole on the protective casing. After that, the coil and its protective cover are connected, and this time a piece of trimmer line is already spreading into the hole on the protective cover.

Cut or Carry: Spyderco Assist H1

The design assembly is planted on a trimmer, turning clockwise until a clearly audible click is heard. By the way, before installing a trimmer line on a trimmer, figure it out better with its design. Otherwise you can easily break something.

That’s all. The tool is put in the working position, turns on, after which the extra piece of the trimmer line itself is cut into a specially made blade for this.

So you learned about how Correctly season the trimmer line In Trimmer!

Installation of a knife on a trimmer

Before changing the knife on the trimmer, the tool must be turned off from the network. If we are talking about motorcycles, then drown out the engine.

• If the trimmer has not previously been used. Fix the keyword key (or a rod of a suitable diameter in the hole of the gearbox-this may be a regular nail). This is necessary so that the shaft does not scroll at. Unscrew the mounting nut and remove the gearbox cup from the shaft.
• If a mowing head is installed. As in p.1, insert the key into the gearbox hole. Holding the key, unscrew the mowing head.
• Install a puck on the hub, then a knife. Make sure that the ledges coincide with the notch. Then the knife will be correctly discounted.
• Install a stubborn washer and a cup of the gearbox over the knife.
• Install the fastener on the shaft and tighten it counterclockwise. To do this, you need a end tube key.
• Pay attention. So that the nut does not spin during operation, most gasoline trimmers have a hairpin that is inserted into the opening in the shaft.

For what cases are lobed knives for trimmers suitable

Compared to gear or milling disks, lobed have small weight, therefore, they are used on low.Power trimmers. Bosch is equipping its electric travo.Shirts with these types of cutting knives. Their advantage in the minimum moment of inertia, which eliminates the negative impact on the drive mechanism.

The number of blades affects the grinding of grass. The smaller the blades, the more mowing grass is crushed. Two.Lobed discs are used to prick uniform and the same type of grass. Their advantage is that they discard cutting off the shoots to the side. For injection of grass in the field when harvesting hay, it is recommended to use 4 or more blade nozzles. They do not grind mowing grass, and at the same time do not load the drive mechanism of the tool.

It is interesting! Particular attention when choosing discs should be paid to the thickness of the blades. Manufacturers produce forged and stamped type. The stamped ones are cheaper, and as a rule, when stones or contact with other obstacles, they break off. It is recommended to choose exclusively forged circles, which differ from stamped by the absence of characteristic zones of chips and slices.

Modernization of the trimmer: how to change a trimmer line for a saw disk

Get one most read article by mail once a day. Join us on and

Trimmer is a simple and very useful tool in the farm with which you can mow grass and cut shrubs. Most often, a trimmer has a nozzle from a trimmer line, less often a plastic or metal knife is installed instead of it. The latter significantly increases the functionality of the tool and expands its capabilities. However, you can go even further

So, in order to modernize the trimmer, it is necessary to choose a suitable diamond saw disc from the TST series. These discs are designed to work with plywood and wood. The disk should have the following characteristics: the outer diameter according to the tops of the teeth is 216 mm, the number of teeth is 48, the landing hole is 30 mm. There must be three rings with the same external and different internal diameter in the kit with the disk. They are needed to compensate for the difference between the landing hole and the response element on the clip puck.

It is not at all difficult to install a diamond disk on a trimmer. This operation is no different from the installation of any other nozzle, except that you should show increased attention and accuracy. First you need to remove the coil with a trimmer line, blocking the gear shaft with a special pin with a special pin. The container for the trimmer line should be rotated counterclockwise. Before installing the saw disk, we convince that its hole is more than the diameter of the sedimentary belt on the puck.

After that, you should alternately try on compensating washers and choose the one that not only fits the width, but also completely selects the gap between the centering belt of the lower washer and the landing site of the saw disk. First, the lower washer with a compensation ring is first installed on the gear shaft, then the diamond disk, after the upper washer and only after that is a protective cup. Do not forget to pull the entire package on the gear shaft with a nut.

Nozzle of the lawn aerator for motorcycles. What is it and what is used for

The owners of private houses will be useful for such a device as the nozzle of the aerator of the lawn for a trimmer. Its main purpose is to saturate the soil layer with air. This is done to improve the growth of lawn grass. The aerator is absolutely safe for vegetation.

Outwardly, the nozzle resembles a rake, but its main purpose is to restore the air duration of the soil to saturate the root system of plants with air. You can also use the device for uniform distribution of organic fertilizers.

The value of the aerator is about 10 thousand rubles, which depends on the manufacturer’s company.

Trimmer Veet Sensitive Precision Electric. Review

The electric trimmer Vit Sensitiv Presizh is no longer a novelty, but such an “active” old woman, about which everyone has long spoke out, Who was going to do it, And I only put my opinion and I write a review in this regard somehow I do not know how to quickly enter the rut. Only recently it turned out somehow that I got into the ranks of the first with the gel stripes of Veet Easy Gelwax, and then “by chance” and so-I buy all the innovations a year or two after their release. So with a trimmer Vit. The wave has already died out, and here I only swing, I use it))

Did not change their minds? Then we ask for mercy

What is most important in working with the Trimmer Veet Sensitive Precision?

The most important part should be done before work

This is to buy exactly The original trimmer Veet Sensitive Precision. And because of the popularity of the device, believe me, this is not so easy to do. Here, either “by eye” determine or buy a trimmer in those stores where you are sure that the products of Vit will not be falsified.

The situation with the invasion of fakes on VEET SENSITIVE PRECISION, it seems to me, will soon surpass the epic with fakes for roller files Sholle. (saw Shol Original, I still managed to buy )

The replica can be both high.Quality and very much inferior to the original trimmer in terms of the quality of plastic, and, most importantly, the fake of Vit Sensitiv Presizh can have not sharp blades, and it will just tear, pull the hairs, instead of cutting them off.

Full price: up to 700 UAH. (1500 rubles.)

Now many imags are held promotions, and the VEET SENSITIVE PRECISION trimmer can be bought at a discount of 20-30%

Well. And the original Tangle teaser does not also produce Great Britain

The electric trimmer Vit is sold in a small plastic box (liners in which are immediately instructions for the device a full.Fledged instruction).

Pulling the tongue for special, you can easily open. But no longer close

Inside is a small “bath”, where all 8 parts of the trimmer are laid out. Each has its own place

The contents of the VEET SENSITIVE PRECISION:

• Bilateral nozzle for point hair removal: 16 and 6 mm blades are ideal for correction of eyebrow shape
• The nozzle-grinder with two length settings (2 and 4 mm) is suitable for ending the eyebrows to the desired length
• Protective cap for a two.Door nozzle for removing hair on the face.

The protective cap is dressed only on a “naked” small blade, without a crest.

The protective cap is not provided for a large blade.

It is great that the set immediately has a battery. One problem is less. If the device is not used for a long time, the battery needs to be removed. I have already swam from the heat in another device in another device.

To put the battery in the device, you need to turn the trimmer body to the left (The pointer should be opposite the inverted triangle).

Under the lid will be the serial number of the device.

Instructions for the use of a trimmer Vit:

How are there no such buttons on the trimmer Veet Sensitive Precision. The device is turned on by turning the case. That is, the “cut” in the middle of the case is responsible for the extraction of batteries and for including the device

There is a nuance in this. The case when turning on is not perfectly smooth. When turning, the faces come a little, the trimmer becomes not even.

Although, I would not say that it somehow has a very effect on his work. And how it lies in the hand.

No shaving gels, fences, etc.D. Over, do not use in the shower (!)

Trimmer vit is used only on dry

How to change the nozzle in the trimmer Veet Sensitive Precision?

Top 10 Most Dangerous Deadly knives in the world | My Deal Buddy

All the same turning the body

Only in the upper part. At the same time, golden contact will be exposed.

We put on the nozzle, turning the case by clockwise to click.

After using the device you need to clean.

First clean the blades with a brush (it is in the kit. The same as in the epilators), then remove the nozzle and rinse under water. I’m washing the nozzles myself (The manufacturer prohibits washing only the part of the block where the batteries), but it is also advisable to wipe dry after washing and grease the blades with machine oil.