How to put a nozzle on a trimmer. How to check the serviceability of magneto

How to put a nozzle on a trimmer

For many summer residents of weeding weeds, it is a problem No. 1. Especially if the site was purchased recently, and before that it has not been processed a couple of years. And often gardeners dream of a mechanical pull. It will not be difficult to make it if there is a trimmer. Such a nozzle is attached to the trimmer according to the principle of a trimmer knife.

Production of nozzles-straps

From a dense sheet of iron (better stainless steel), cut a circle, there should be a landing hole in the center, and holes must be drilled on the entire surface. To fix the sharpened bolts with a washer and nuts in them. It turns out a design resembling a hedgehog. These very thorns-bolts will be weeding.

Rules for the operation of a trimmer

Before starting a haircut or other care procedures, you need to read the user guide. It indicates what nozzles a particular device has, how to collect them and why use. Some manufacturers also tell the tricks that will help make a haircut or shaving professionally. In general, the rules for using the trimmer alone for all devices.

• Before starting work, you need to clearly decide what hair length is needed, and which nozzle is suitable for this.
• The minimum length of the machine is given when working without nozzles. In this case, the cutting edge must be leaded close to the roots of the hair.
• Haircut is carried out against hair growth.

Before starting work, you need to choose a nozzle

How to shave a trimmer of a beard and mustache?

How to shave a beard and mustache trimmer?

First, it can show that only a professional can use a trimmer for a beard. The device is really difficult, but if you follow the rules, practice and get used to it, then you will even like it.

Before using a trimmer, it is worth washing the vegetation with shampoo, dry, comb, gently separating the hairs. Then think about how long and shape you want a beard. If you need to cut a lot, first do it with scissors.

When working, start cutting on the right and smoothly move to the left. That is, the haircut should go from ear to ear.

If you use the trimmer nozzles:

• You need an even cut one length.
• Moving from right to left to make a circuit where the center of the pointed part of the beard will be the landmark.
• Do not forget to put the whiskey in order.
• When making bezes or bends, keep a trimmer at an angle.
• When forming a mustache, work carefully with the mouth area and make the upper circuit. You can work with a trimmer in the same way as a regular machine.
• Care behind the neck, drawing a line, but to the admixture. It is better to clean all the hair below the kadyk with a machine.

How to use it correctly?

To know how to use a trimmer, it is enough to read the operating instructions, check the device for the correct operation when turning on. Why can you drip a few drops of lubrication on the blade. The process is as follows:

• Turn on the device in the mains;
• Apply a little lubricant on the blade, wipe with dry matter;
• Make sure that there are no hairs between the blades;
• Give a few seconds to work an idle device;
• Start the process of shaving with cutting long hairs and with a gradual transition to shorter ones;
• Collect extra hair, look at yourself in the mirror;
• In the absence of the desired result, set the zero nozzle of the trimmer and walk around the neck, under the admixture again.

Attach a nozzle to the face with a flat part. To achieve the highest results, start shaving hair from the face, then from the neck. If the length of the beard is not modified, then it is worth changing the nozzle, replace with No. 2, as a shorter. After shaving the area of ​​the face, gradually go to the neck (tub), starting to cut off the hair of short length, setting the 1st mode of the nozzle speed mode. You need to drive along the chin from the bottom up.

If necessary, give the length of the hairs of 4-5 cm, you can apply the trimmer blade, for which to remove the nozzle and the limiter. If you need to achieve perfectly smooth skin, then you will have to use a safe razor to eliminate hairs, in particular under the adopted manner in full.

If you need to get the shortest possible bristles and shave the problem areas (around the mouth), then it is recommended to apply nozzle No. 3. Next. Smile, close the mouth, shaved the remaining hairs along the upper lip. To understand how to shave properly a trimmer, it is worth noting that it is necessary to make movements against the growth of bristles, t.E. Down up.

Replacing the trimmer line with a disk or knife

When ennobleing a personal plot, park zones and other places where various plants are required, it is often necessary to change the cutting tool in the trimmer. This is dictated by the fact that the standard cord installed in a mowing head can only cope with herbs. But when a shrub or a young shoot of trees appears on the path of an employee, the trimmer line cannot cope with such a task, and it requires a change to a more effective cutting tool.

Trimmerers manufacturers provided such situations, and complemented their products with a mass of nozzles in the form of knives with several “petals” or in the form of disks similar to circular saws.

If you replace the trimmer line with a knife with several “petals”, then such a tool can be mowed by both high grass and plants with thick and dry stems. And changing the trimmer line to the disk, the user of motorcycles has the opportunity cut shrubs or small trees.

Knives and discs are installed according to the following algorithm.

• The first thing you need to remove, stagnating the shaft, a mowing head (twist clockwise) or a nut with anthers if the unit has not yet been used.
• Set a saw or cutting knife so that they put on a small ledge (sleeve).

For a better understanding of the process of changing the tool, you can watch this video.

The best models

Nozzles for trimmers can be the simplest (head with a trimmer line), the cost of which is hardly reached 300 rubles, but there are options that combine several functions. Their cost is much larger, but also efficiency higher.

Makita KR400MP

The cutting element is made up of cutters made of high.Quality metal in a diameter of 23.2 cm. The main advantage is relatively low, which allows you to work on the site for more than an hour without stopping to rest.

The brand has proven itself well, so such a cultivator.Type nozzle is the highest quality and comfortable to use.

Oleo-Mac Cult

The nozzle has a soil lug, thanks to which you can set the desired depth of plowing. The rohs of weeds cling to the knives and stretch to the surface of the soil. Suitable for weeding a row, greenhouses and gardens of large areas.

Relatively large dimensions, which several times weights the weight of the trimmer itself.

The cost of the Italian nozzle in the region of 13,000 rubles. The average life is 5 years.

SRAC-2500 Echo

A trimmer nozzle that simultaneously removes weeds and loosen the soil. Is one of the most affordable options among itself. Average cost in the region of 7000 rubles.

Troubleshooting A Two-Cycle Engine That Won’t Start

• Compact, easily passes near plantings, without injuring their underground part.
• Quality components.
• Long life.

It is necessary to independently adjust the depth of cultivation at the level of 1-2 cm

According to buyers, it was this nozzle that showed itself well in the front garden, and in the greenhouse, and in the open field.

Baccoreus from ordinary benzocouses

Having a little redid the gasoline trimmer, you can make a suitable bitch, which is useful in any summer cottage or adjacent site. For this homemade, you will need a gearbox from a gas trimmer, asterisk and a tire of 11.5 inches (29-30 cm).

Installation of the leading asterisk is carried out using standard parts of the benzotrimer. Just instead of a factory disk with a trimmer line, an asterisk itself is installed and attracted by a native nut. The thread here is the opposite, so there will be no spontaneous unscrupulous.

It will also be necessary to make a transition plate for tire attachment. The distance between the puck and the trimmer gearbox is 5 mm, so the plate will be made of 4 mm metal to leave the gap.

The manufacturing process of the bitchcase

First you need to mark the width of the bracket, which should be equal to the width of the body gearbox of the gas trimmer. 55 mm. Next, cut out the workpiece using a Ushm. You can make a large hole in a metal plate under a ledge in a gearbox using a crown for metal.

If there are no crows at hand, you can make such a hole with a “grandfather’s method”. To inhibit a lot of small holes throughout the circumference, and then process with a file. Next, clamp the part in a vice or press to the table using a clamp, then make the marking and drill the holes for fastening.

To raise the tire slightly, we use a segment of a steel square 20×20 mm. Weld it exactly in the middle of the bracket. Then it remains only to make a hole for fastening the tire itself. Now homemade bachores made of ordinary benzocouses is completely ready to work. Do not forget to write in x what you think about this homemade.

What knives to put on electro and benzokos

Before buying and putting a knife on a motorcycle, find out what they are and in what cases are used. Today, manufacturers offer the consumer a large number of types of these supplies. In general, the entire cutting tool designed for mowing grass can be classified:

The main material for the manufacture of trimmer knives can be plastic or metal. The use of such consumables largely depends on two parameters:

For safety reasons, manufacturers do not recommend putting steel knives on electric trimmers. Almost all motokos operating from the electric network and battery are equipped with plastic blades. Depending on the manufacturer, they can be a solid disk design, with several blades or in the form of a special mowing head, which provides for the installation of removable plastic blades.

Direct rod at a gasoline trimmer and curved in an electric

Putting a metal knife on an electric trimmer does not allow its design features.

• The curved rod of the unit reduces the distance from its working part to the legs of the Kosar. In the case of a collision of blades with a stone or other hard object, a braid is discarded to the legs.
• The high torque, which we mentioned above, in the event of a collision of a metal knife with a solid object, transfers a large load to the flexible shaft of the trimmer and its engine. What causes their premature failure.
• Handle Electric Knules most often does not have a restrictive bar playing the role of the stop. Which does not exclude leg injury.

It is these features that allow the use of exclusively plastic knives on trimmers with electric engines. In a collision with an obstacle, the blades are destroyed, thereby protecting the legs of the mower from obtaining possible injuries.

The use of metal knives only on gasoline trimmers is also due to constructive features.

• The direct design of the rod increases the distance to the legs, which provides the Cossacks with complete safety.
• Comfortable U-shaped and J-shaped handles allow you to keep the tool firmly. D-shaped handles Motokos are equipped with a limiter resting in the leg of the Costsa, which does not allow to let the head to the legs when meeting a cutting disk with a solid obstacle.
• The clutch of the gasoline engine allows you to smoothly gain speed to the optimal level. And when the blade collides against a hard surface, it can extinguish part of the blow.

Thus, gasoline trimmers with an installed metal knife are best used in large areas. They will successfully cope not only with high coarse grass, weeds, burdocks and nettles, but also with shrubs, as well as young trees.

How to test a small engine coil using a Multimeter.

The shape of the blades of the disk set to the trimmer does not affect the quality of the work performed. The speed does not depend on them. Triangular, trapezoid, rectangular forms are all marketing course of manufacturers.

What types of trimmer knives are

Initially, we note that metal discs can be used not only on gasoline, but also electric trimmers. The main condition for the use of metal cutting knives on the equipment. In the design of the tool, the transmission mechanism (shaft or gearbox) should be a rigid type. A hard.Type gearbox is a metal shaft transmitting a torque from an electric or gasoline engine to a working organ.

There are models of trimmers with flexible shafts, the design of gearboxes in which is represented by a steel cable. These are, as a rule, low.Power electrical herb.Shirts that are not intended for large loads, as well as household benzocyes. You can’t use metal disks on trimmers with a flexible shaft (only plastic), as this will lead to a Rapid failure of the gearbox. Before buying metal cutting mills, you will need to find out the type of gear ratio of your tool. Hard or flexible.

What type of gear ratio is used on the trimmer is indicated in the technical description to the tool. If the trimmer has a curved bar, then a flexible shaft is used in its design. Tools with direct bar can be equipped with rigid and flexible gearboxes, which depends on the power of the trimmer.

Trimmer knives are classified according to the following signs:

• Manufacturing material. They are plastic and metal. Plastic knives are less effective than metal, but they do not have a large load on the shaft and the drive mechanism of the tool. Plastic discs are used on electric trimmers and household benzos
• The design of cutting devices. Steel discs are of two types. Blade and toothed (milling). Plastic knives are produced in the form of blades. Tough devices have a similar design with circular discs, and lobed have large flat knives
• The number of cutting edges. The number of teeth and knives on the disks differs, which affects the performance of cutting equipment. On gear discs, the amount reaches 80 links, and on blade. From one to four pieces
• The presence of additional spraying. Steel gears are additionally equipped with winning attacks, which allows you to use a tool for driving grass on mound surfaces. When the disk is contacted with obstacles in the form of earth and stones, the teeth are not deformed and do not dull, which is achieved due to the presence of winning attacks. Experts say that devices with carbide attacks do not serve for long. Attacks wear out quickly, and then the milling cutter is used without winning

Plastic knives for trimmers not only cost cheaper than metal ones, but also do not have high loads on the engine and transmission mechanism. This is especially true when the knife stumbles upon obstacles. The higher the elasticity of the cutting knife, the less likely the deformation of the plastic disks.

It is interesting!Rosted wheels with a large number of links are used to prick different grass. Dry, green lawn and thick.Nisted. The cut with such a disk is straight, clean and even. In addition, a large number of teeth excludes their Rapid dullness, and the presence of additional holes on the surface of the circle (perforation) is intended not only for cooling, but also to reduce weight and increase inertia.

Proper operation of a trimmer for grass

In every summer village, village, suburb and in the city itself you can see these devices: they work tirelessly, aligning the lawn grass, cleansing the space of squares and parks, gardens and gardens from thickets of burdock, wormwood and weeds. The noise and crackle from the trimmers are heard from the beginning of summer to autumn, until the growth of the grass is so much so that it will no longer need to trim it. The automatic braid deserved its popularity for the simplicity of the device and operation. It is easy for her to use, it is easy to care for, and in case of breakdown it is not possible to easily fix it without difficulty. The article will just tell you how to use a trimmer for grass correctly.

As with any other technique, in working with the trimmer there are rules. First you need to make sure that the main nodes and assemblies: screw, rods, handles and motor. If the device has not yet been assembled, then it should be correctly assembled according to the instructions.

Gasoline unit

In the case of a gasoline trimmer, it is necessary Check the gearbox for lubrication. Also, do not forget to add lubricants to the fuel tank, if the instruction manual is evidenced. As a rule, gas and oil are mixed in a ratio of 45 to 1, but these indicators may vary depending on the model and manufacturer, so you should carefully study all the technical requirements for the device. The fuel container must be filled on the very neck. If all technical fluids are flooded, then you can try to start the device. But it’s not worth mowing right away, it will be better to let the trimmer work without load so that the engine works to the flooded fuel. A few minutes will be enough, after which you can give the motorcycle full load.

Elektokos

With an electric trimmer, everything is much easier. After making sure that the gearbox has the required amount Litola, You can start work. No additional measures are required. Unless it is necessary to make sure that the carrying does not run on the path of mowing in order to avoid possible damage.

When the device itself is ready to work, you should make sure that there is nothing around that could interfere with the work. If possible, the estimated mowing area should be cleaned of snags, glass, stones and other solid objects that can damage a knife or trimmer line.

Depending on the upcoming work, you need to choose The nozzle on the trimmer: a screw-knife for weeds and hay, a trimmer line for lawn grass or a disk saw for shrubs. Mowing should be in the opposite direction from people, if possible, moving away from buildings and buildings. Do not get too close to the fence and other designs, since the trimmer line can catch on sharp edges, and the screw-knife will bend if it accidentally offends it a solid object.

The preparation of the device itself will not take much time, all modern models of devices are designed to facilitate and simplify their operation, starting to work in the shortest possible time.

Instructions for replacing a disk on a gas tank with a step.By.Step description

Having sorted out the design of the cutting knives, it remains to find out the process of replacing them and installation on the tool. If there is a head with a trimmer line on a gas station, and it is planned to install a metal disk, then no remodeling of the structure will be needed.

To install a metal disk on a trimmer, the following instructions must be followed:

• First, a plastic protective casing is removed. It is not necessary. Depending on the model of the tool, the dismantling process may differ. If the trimmer has a metal casing, then it is not necessary to remove it. Removing a plastic casing is performed in order to install a metal
• Using a special key-player or screwdriver, it is necessary to block the gearbox. The shaft blocking hole can be located on the side or on the end side
• A mowing head or spool is twisted from the tool if they are installed
• A disk is installed in the place of the head or spray. The internal diameter of the disk should be in a special groove. The nozzle is installed so that the front side (with letters) looks upward
• After installing the disk, a fixing washer of the corresponding size is placed. After that, the mounting nut is screwed, having previously blocked the gear shaft. Direction for screwing the fastener. Counterclockwise
• After completion of work, it is necessary to install a protective metal casing. If it is not, you should leave a plastic casing

As you can see, the procedure for replacing the disk on the trimmer is not at all difficult, and takes no more than 5 minutes in time. Below the video shows how to properly change the mowing heads and circles on benzocoses.

Instructions on how to use a gasoline trimmer learning to start a tool

Before working as a tool, it must be initially started. How to get a gas tank, consider in detail. First, the tool should be placed on a flat surface so that the disk fixed to the shaft does not cling to anything. After that, we start starting the engine of the benzokos:

• Initially, fuel should be swollen into the launch system. To do this, press 4-5 times on a primer (soft hemisphere on a carburetor)
• Next, transfer the carburetor switch to the “OFF” mode. This switch is responsible for opening and closing the air damper. The transfer of the switch to the “OFF” mode allows you to make the fuel mixture during the launch of the enriched
• There is a switch on the handle near the accelerator. He is responsible for turning on and disconnecting the ignition. Before starting, you need to transfer the ignition switch to the “1” mode
• Now you can launch. To do this, you need to hold the tool with one hand, and the second sharply pull the starter handle. If the braid engine did not start the first time, then do not despair. Attempts to start the start until the engine starts. Typically, for this, 2-3 repetitions should be performed
• If the engine does not start after 5 repetitions, then the fuel suction should be repeated using a primer, and start starting again
• As soon as the motor starts, you need to transfer the air damper switch to the “ON” mode. This means that a mixture of fuel with air enters the cylinder
• Let the tool work for 15-30 seconds at idle while the engine warms up, after which you can proceed to the span of grass

Now they read: the cutting block of the Braun trimmer for types 5542, 5544. Buy in the official Braun store

The above instructions for starting the engine and trimmers are appropriate for a cold start. If in the process of operation the tool was a pause, then when re.Starting the non.Surviving engine to close the throttle, there is no need. It is required to simply turn on the ignition, and pull the starter handle.

Can you make a trimmer coil with your own hands

On sale there are a large number of trimmer heads (not automatic), which have a low price and good quality. But sometimes situations arise, for example, in the country, when the trimmer coil broke, and its repair is impossible, the store is far away, and you need to mow. In this case, you can quickly, literally in a few minutes, make a simple trimmer nozzle to fix the trimmer line from ordinary plywood 10-12 mm thick.

• Take a piece of plywood or textolite and draw a circle with a diameter of about 14 cm on it.
• Cut the disk with a jigsaw or hacksaw for metal.
• Drill a hole in the center of the disk, suitable in diameter to the gear shaft. Do not forget before installing a disk on the shaft, put a puck on it.
• You can fasten small corners along the edges of the disk or make 1-2 holes on the opposite sides. They will serve for refueling fishing lines in them.
• To fix the trimmer line, you can screw several screws into the plywood.

Such a home.Made mowing nozzle is fixed on the shaft With a nut. Twist or unscrew the nut without fixing the shaft will not work. To replace the cord, it will be enough to release the screws, insert a segment of the trimmer line of the required length and press it again.

Also, a mowing nozzle for fixing the trimmer line on it can be made from a metal sheet. How to do this can be understood from the next video.

Advantages and disadvantages

A cloak-cultivator for a benzotrimer, regardless of its variety, increases the weight of the assembled unit to 5-6 kg. This is a rather popular product in the buyer, which differs in simplicity of maintenance. This device is characterized by a more acceptable cost in comparison with the equipment for the motor.Cultivator. The cultivator nozzle for a gasoline trimmer is convenient in greenhouses, it not only loosen the soil, but also saturates it with oxygen.

Given that this device is performed with high.Quality assembly, it is durable, which cannot but rejoice the user. The devices themselves really simplify the work of the summer resident and allow you to accelerate its work.

As for the shortcomings of the nozzles-cultivators on the benzotrimer, many buyers note their weight. The weight failure of the device is the reason that, faced with complex soil, it may not delve into the soil at all, but only scratch its upper layer. In addition, as practice shows, it is impossible to press mills to the ground in such nozzles. This is fraught with the fact that the bar begins to spring, and, as a result, the equipment wear out quickly.

If you try to press the device to the ground more strongly, the bar does not withstand and bends, which is why a braid or a working nozzle itself may break. The drive bar is quite long, during cultivation, vibrations cannot be avoided, the value of which is directly related to the length of the bar itself. In addition, it depends on the complexity of the processed area, because the load on the wheels and cutters in the case of dense soil will be more.

It is difficult to keep a vibrating tool for a long time, as well as manage it. In this case, it is also worth knowing that constant work with a vibrating tool can be fraught with negative consequences for human health. For example, constant vibration can harm blood vessels and nerves in the fingers of those who have problems with blood supply. With prolonged work, a motorcycle with cultivation nozzle is possible in healthy people.

If you take a hitch for cultivating the land, it is better to choose a disk option. It is equipped with a safety casing, although this is somewhat complicated by the user’s work. As for the independent manufacture of the nozzle, this process does not always give an effective result. In addition to the fact that the work on the manufacture of hitch for the cultivation of the soil of labor gain, it is far from always a quality and reliable. In addition, far from always the products of independent manufacture are cope with the turf.

To rinse the mills, it is necessary to remove the equipment. In addition, from time to time the device must be lubricated with oil. Given the severity of the blade, it is necessary to work in gloves. In the process of cultivating the soil, one cannot switch to high speed. In order to properly put on a protective screen with a limiter of trimmer line, it is necessary to remove a restrictive nut from it, insert a bracket into a slot and rotate the screen until the bracket passes through the groove. After that, you need to tightly pull the lamb nut to the bolt.

To install the nozzle on a motorcycle, it is necessary to remove the cork from the hitch rod. After that, the connection is made so that the blocking (release) button enters the recess on the coupling. The nozzle is pushed forward until the button is snap. Before starting the work process, you need to tightly tighten the handle, turning it around the clock. If the holes are not suitable, such a nozzle cannot be used for an existing benzotrimer.

Types of semi.Automatic heads

A semi.Automatic head head, as a rule, consists of a case, inside which several springs and a spool are located. Shpuli, in their execution, are divided into:

Many owners of household trimmers remake single.Sectioned spills for two.Section. To do this, you need to find a solid metal plate, and apply a circuit with a bursal diameter on it. After that, the plate is cut along the contour so that the thickness is located near the cord winding area. As a result, the resulting circle must move freely around its axis. Further on the resulting ring you will need to make a cut and put the spool inside the ring. Both parts must be interconnected using a tape or fast.Drying glue. As a result, the manufacturer gets a spool, a trimmer line in which can be wrapped in two sections.

Materials:

Everything that is needed for the manufacture of the nozzle

The most difficult thing to make the nozzle is to mark and make holes under the knives and trimmer shaft symmetrically. That is why the finished perforated plate is selected.

How to use a trimmer correctly

Garden trimmers are effective. Newchers think that it is easy to work with a lawn mower, because you just need to include it in a socket or pour fuel, but this is not entirely like that.

The efficiency of the garden tool and its service life directly depend on operating conditions. Therefore, before using a trimmer, you need to perform preparatory work.

The lawn with which you need to mow the grass is carefully examined. Be sure to remove glass and large stones. Having flew out from under a working mower, they can injure a person. They remove the wire from the lawn, because it can be wound on a rotating element, break a mower.

After that they move to the installation of the cutting system. There are low power trimmers on sale that use only trimmer line. It is designed for mowing juicy and soft grass. But there are models with a capacity of more than 1 kilowatts on which metal knives are installed. They cut sowing and other hard weeds, trim the young shrub.

In order to replace the cord with knives, you need to unscrew the mounting nut, install the cutting element. Then the nut must be returned to the place, tighten it with the key.

The operator must take care of his safety. Mow grass in tight protective clothes. Special glasses are used to protect the eyes, they will protect from dust, grass and flying garbage. Hands are covered with gloves.

The electric trimmer is included in the network, and the battery models are charged before the start of operation for several hours. Fuel is poured into a gasoline mower.

The mower is kept so that the spool or knife is located parallel to the ground. When the tool is installed in the correct position, the motor is included. After the grass is bewildered, the mower is turned off.

First start

Before the first launch, the operator collects a mower, the procedure is described in the instructions that are attached to the product.

If the trimmer is gasoline, it is necessarily checked before operation. The fuel tank is filled along the neck.

The motor should work for the fuel, so at the first launch it should work for several minutes without load. After that, start mowing grass.

How to refuel a benzotrimer

Motokos working on gasoline are with two.Stroke and four.Stroke engines. The first option is much more common. What are the differences between them:

• In trimmers with a 2-tact engine, the response to press the inclusion lever is faster (for this reason, the benzocos are mainly equipped with this type of engine);
• A tool with a two.Stroke engine will be much easier, as well as easier to maintain;
• Fuel consumption in a two-stroke engine is higher than in a 4-stroke with a similar power by about 30%;
• The 4x-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not thrown into the atmosphere, as well as its noise level is much lower;
• And the most important distinguishing feature is the refueling: a 2x-stroke engine is equipped with one common tank, where gasoline mixed with butter is poured; 4x-tacte has a separate gas tank and a tank for motor oil.

For refueling, it is necessary to use fresh gasoline AI-92 or AI-95 and high-quality motor oil for garden equipment (for 2x- and 4-tact engines, manufacturers produce different oil). Oil can be used mineral, semi.Synthetic or synthetic.

The proportion of gasoline and oil for trimmers with a 2x-tact engine can be found from the instructions for a specific model. Usually it is 50: 1, in some cases, proportions of 25: 1 or 40: 1 are recommended. Prepare the fuel mixture in a separate container with accurate observance of proportions. Never pour the liquids “by eye” directly into the tank without mixing them in advance. Detailed instructions for mixing a benzomalam, with video and description, can be found on our website here.

Running

Before starting operation, gasoline braids are necessarily rolled up. The operator turns on the motor, he must work for a while at idle. It is necessary to ensure that the engine does not overheat, the load should not be.

When running in, motorcycles increase the load gradually. If you start work with high speeds, the motor will work well, this will affect the further work of the mowing.

At the first launch, you should not fully develop a temporary resource. After the engine works at idle, you can proceed to processing the lawn. Motokos should work for no more than 15 minutes, after which the motor is turned off, it must cool.

If you need to run the electrimmer, the braid is first collected. Then make trial launches at least 3-5 times. If the engine works well, go to mowing. At first they work for no more than 5 minutes, then the duration of work is gradually increasing.

How to wear a belt

If the tool has a shoulder mount, before starting work it hangs on the shoulder. The trimmer is fixed on both shoulders if it has a backstage mount.

The model with a bicycle handle is held with 2 hands, the D-shaped handle is wrapped in palm. The belt must be worn so that it is convenient, then the back will not get tired.

How to cut the lawn so that it turns out to be even

So that the grass on the lawn is trimmed evenly, it is necessary to lower the mower as low as possible during operation. The site must be divided into squares. You need to work, moving clockwise. In this case, the hay will always lie on the left without interfering under the feet.

Kosim under hay

It is better to mow hay not with a trimmer line, but a metal disk. Grass is cut under the root, maintaining its length as much as possible.

Spinning high grass

If you need to mow high grass, this is done in several suits. The lawn processes 2-3 times. The rotating part is lowered from top to bottom, in which case the grass is not wound on the reel.

The operator must remember that the grass wound to the coil leads to overheating of the motor. If this happened, the motorcycle is turned off, and the coil is cleaned.

Most effective mow grass with the ends of the trimmer line, and not the entire length. In the second case, the tool works worse, engine overload is possible. If you need to cut the grass on the site of a large area, to increase the efficiency of the trimmer, you must be tilted towards the mowing.