How to put a spool on the gasoline grass trimmer

Classification of reels for grass trimmer

Since grass trimmers come in a wide variety, the bobbins on them are also of several kinds. They are classified according to different characteristics: the need for user participation in the process of filing a string, the material of manufacture, by design (for semi-automatic models) and how to wind the cord on the spool.

By cord feed

According to the method of filing the line trimmer heads are divided into:

Manual reel appeared before the other options. Its design is simple and reliable, but to wind off the line instead of the used need to manually. To do this, you have to silence the grass trimmer motor and pull both ends to a suitable length.

Semi-automatic reel allows you to lengthen the cord without turning off the engine, right during operation. This requires the head to be pressed against a hard surface so that a mechanism is triggered which releases the line ends. Centrifugal force unwinds the cord, and a man raises the head of the device above the ground again when the length is sufficient. The whole procedure takes seconds.

Automatic spool is triggered when the mower reduces the engine speed (a lawnmower has this feature, but not an electric grass trimmer) or starts it. The line is extended until the user increases the engine speed again.

Important! Some of the cutting heads are available only for specific models of trimmers, but there are coils that fit devices of different brands and types. These devices are called multi-purpose devices.

By material

According to the material from which the working heads are made, a distinction is made between plastic and metal reels. Shock-resistant plastic is used for the former, aluminum and steel for the latter.

spool, gasoline, grass, trimmer

By Design

The bobbins of semi-automatic reels come in one or two-piece. On single-section spools the cord is wound evenly, the coils are distributed in one groove. Two-section reels are halved, so the line is wound into two grooves and each end is unwound from its own compartment when the working part is lengthened. Evenness is not important for these bobbins.

According to winding type

According to the way the line is wound on the reel, there are the following types of spools:

To refill a collapsible bobbin, you will have to turn off the grass trimmer, remove the cutting head, remove the spool from it, remove the remains of worn-out line and manually wind on a new. Then assemble everything in reverse order and continue mowing.

Fast-charge spool does not need to be removed for filament winding. Simply feed new line through holes in bobbin case, wind it on bobbin as needed and cut off excess length or cut loop.

Warning! When threading the filament, only thread in the opposite direction to the working movement of the reel. The desired side is most often indicated by an arrow on the bobbin itself.

Top 5 Best Models

The following ranking includes the most popular spools in five different categories. The list was compiled based on current 2020 sales figures and consumer feedback on these models.

The most affordable model

Among the best available spools stands out the Patriot DL-1200. This semi-automatic collapsible bobbin from Patriot is suitable for chain saws with straight booms. Parameters of the thread connection: M10×1.25 LH (left metric thread, diameter. 10 mm, pitch of 1.25 mm). Thickness of line. up to 3 mm. Compatible with other devices: Lesnik, Home Garden, ELG, Huter.

Positive points Negative aspects Initial price,
Sturdy model, attaches securely to the trimmer. Not checked 175

The best automatic spool

The best automatic group spool is Denzel 96308. It is suitable for gasoline and electric equipment with mounting under the nut M8 × 1,25 RH (diameter 8 mm, thread right). Max. line section 1.6 mm, length up to 15 m. The filament is extended automatically when the mower is switched on.

Positive aspects bad points Initial price,
High-quality materials and workmanship, good line feed. Fits single model 96608 TE-550, can only be used on soft grass. 430

Best semi-auto model

In this category, the STIHL AutoCut C 5-2 bobbin is the leader, which is designed for the FSE 60/71/81, FS 38/45/50 trimmers of the same brand. It is designed for 2mm line and is characterized by easy threading without disassembly of the head.

Positive aspects negative aspects Initial price,
Durability, fast winding. High price. 850

Best manual model

Among the bobbins with manual control, the bobbin Strong STU-226, aluminum gathered the most positive reviews. It is a spider-type reel with 8 cutting ends. It is suitable for electric and brushcutter and will not rust or deform even in the most difficult working conditions. Ignition/power must be turned off for cord replacement.

Positive aspects Negative points Initial cost,
Versatility, high durability, reliability. Need to constantly monitor the length, condition, and stock of the line, which is used up faster by using cutoffs. 650

The best all-purpose model

Of the many universal bobbins, the Denzel 96316 is especially popular. It is a semi-automatic spool for lines up to 3 mm. Diameter and thread pitch (left) is M10×1.25, but thanks to adapters this reel can be put on grass trimmers with nuts and screws of 8, 10 and 12 mm in diameter. This bobbin is suitable for many models of power and electric brushcutter.

Positive aspects Negative points Initial price,
Compatible with a variety of devices, easy and fast installation of the spool in the body, a good combination of price and quality. Not observed 650

So, a trimmer head failure is an unpleasant, but easily removable obstacle on the way to a tidy plot or harvested hay. Even if the desired model is not in the store, you can always make a reel with your own hands, although with the current variety of products for the garden to this method must be resorted to very rarely.

How to properly install the reel on a hammerflex grass trimmer

How to install the 2-blade blade on a STIHL FS 55 brushcutter. Video instruction on how to change the mowing heads of lawn trimmer from reel (fishing line) to knife. Subscribe to the channel https://www.YouTube.com/user/1kurbanik This channel is dedicated to reviews of machinery we encounter in everyday life. If you want to be informed of the latest news, I recommend that you subscribe to this channel. I regularly post new videos. Thank you very much everyone who makes my video clips reposts, thereby helping the channel to develop in the network.

The details of how to use the brushcutter for good haymaking are explained and shown. My personal experience. My pages: http://vk.com/lkotvitskij

The video shows in detail how to wind the line on the grass trimmer or brushcutter reel. Threading the line on the grass trimmer‘s mowing head is easy and does not require any special skills. So it’s enough for a person to see once how to change the fishing line on a trimmer head to repeat this on their own. I show the particularities of winding the fishing line on the example of the mowing head of the trimmer head of the Oleo-Mac Sparta 250 T brushcutter. It may differ in some details from other manufacturers’ mowing heads (the differences are mainly in the mowing head locks, which may be one, two or more), but in principle they are the same, so the video will be useful to owners of brushcutters and trimmers from different manufacturers. Thank you for watching! Subscribe to HotSEM Channel! Find out what the next video will be about!

http://fajno.in.ua/g5824311-zapchasti-motokosy How to put a disk on the gasoline trimmer for grass. In the video we use a 40-tooth disc, but you can use the same principle on 8, 4 or 3-tooth discs.

How to choose a good knife for brushcutters, especially for haymaking. Often people are quicker to mow with hand-held mowers, and lawn mowers are rarely used, just around the house. Here’s the answer as to why. My pages: http://vk.com/lkotvitskij http://www.odnoklassniki.ru/profile/542878932121/about http://my./list/leon76/ https://wwwcom/profile.php?ID=100006487604627 Continue the video here: https://www.YouTube.com/user/leonidkotv/playlists Continued on new channel: http://www.YouTube.com/user/LeonidKotv?sub_confirmation=1

Trying the cutter in action. Part one of my grass trimmer review here: http://www.YouTube.com/watch?v=hZvjDK5l744 My page: https://vk.com/dvotdi

Blade trimmer for grass, repair with his own hands:

When you start up in the economy power tools you should immediately understand that in addition to the electrical part, there is a mechanical, which requires timely maintenance, cleaning, cooling and lubrication. The electric line trimmer for grass is no exception. Let me tell a little about my trimmer, I do not specify the model and parameters. it is not so important. The first thing in it was a button, when I took it apart, there were clear signs of melting, I think it was caused by power surges and the processes that occur at the time of switching. And to put it simply, it was of poor quality. Like many other parts of the grass trimmer, the button can be replaced by another one, suitable in parameters (current and design). Blade for grass trimmer, well, by the way, like other nozzles is an expendable material, and it is natural that she ran out, and I have. As a typical dodger, I started to put in there everything I could, from ordinary thick fishing line and ending with a thicker and stronger special line for grass trimmer. In spite of natural curiosity and inquisitiveness, I acted within the framework of the instructions I read, but even that did not save my coil from destruction.

Reel from my grass trimmer

Reel as viewed from the side

As if the spool (I mean the part where the line is wound), is not very that suffered in the process of my experiments, but the special grooves that hold the line simply grooved, it is not surprising because they are plastic, and trimmer I use for a long time and quite often. Of course, even for older models of trimmers spare parts are sold, from the fishing line to the engine. But the new spool seemed to me too expensive, the price is right up to say “bite”, and I was not satisfied with the fact that it can not be tucked into the line of 5 mm thickness (my trimmer for grass is designed to use the line thickness of 2 mm).

And so after much deliberation on how to modify a grass trimmer reel, I came up with a simple idea, easy to implement and pretty handy in operation. It is necessary to cut a circle, of strong material, I used 4mm thick foil-coated textolite.

A disk of textolite with holes

You need to make a hole in the center of the disk matching the diameter of the spinning shaft, and four more holes (or maybe more) matching the diameter of your fishing line.

The disk and pieces of fishing line we use

The idea is very simple, you don’t use a reel, you don’t wind the line and you just tie it to the holes and attach the disk to the holder on the same principle as the old reel, it is only important to find a suitable spring. for the reliability of attachment (who has a trimmer for grass will immediately understand what spring we are talking about).

Tie pieces of fishing line to the disk

How to replace string trimmer edger line

Tuck the fishing line in and attach the disk to the holder

You can not tie the fishing line, and in spite of the high speed, it something and so is pretty strong and does not fly out. The way you organize the line direction in the weed trimmer, you benefit from the fact that you can hook a line of any diameter and configuration, and you never need to spend money on new spools. But there is a disadvantage, you need to cut pieces of fishing line of a certain length, it may not always be convenient. But on time and labor-intensive threading the line, not a little worse than the classic way in the native coil.

This is what my version looks like

I took a picture without the grass trimmer and stop spring, as it was not in the country at that moment. But I can safely say that the result of my improvement has exceeded all my expectations. Now I have much less spending on consumables for grass trimmer, which once again proves the triumph of reason over the dogmas of the instructions included with purchase tools.

  • The inductor coil with their own handsThe inductor coil as a radio electronic element is quite common. Sometimes not replaceable.
  • Fly fishing with their own handsIf you’re into fishing, then probably gradually turn out not only the.
  • ChokeThis article describes in general terms a radio electronic component called.
  • Scheme for turning on a super-bright LEDEven in our time to buy a good LED flashlight, bright, reliable.
  • Wax in amateur radio practiceInformation of an informative nature. A simple and long-known tip is described.

Fishing line installation: pros and cons

Sometimes an ordinary fishing line is installed in the drum of the garden trimmer for grass, instead of a special one. it’s just a waste of time. Fishing line is too soft and wears out many times faster than the traditional version. It can really mow grass, but such an unconventional use is not well suited to it. Fishing line can be used exclusively as a spare, if nothing else is at hand.

It is also worth considering that it must be thick enough. It is better to insert a fishing line that is at least two millimeters thick. By the way, there can be difficulties with its installation, if the grass trimmer model provides winding on the spool.