How to put on the shoulder strap for lawn mowers
What is a backpack strap
It should be understood that the weight of a filled lawn mower is on average 6-9 kg. And this device must be kept in limbo all the time. To evenly distribute the load, the backpack strap seems to encircle the body from all sides. The main load falls on the shoulders and back, so its upper part is supplemented with wide foam inserts and fabric straps. Further, the straps are lowered along the body and, with the help of a quick-release clip, are connected to each other in the chest or abdomen area. And so that the belt does not cut into the body during load, a wide and durable lining is provided. A plastic leg guard is attached to the belt. It has a carabiner for attaching to the trimmer and spring cushioning. The ease of unfastening and fastening the lawn mowers is provided by a quick release latch located on top.
On a note! Different models of backpack belts may differ in the design of locks, carabiners, the presence or absence of additional pads and latches. However, the principle of the device and work is the same for them.
Balancing the braid by moving the eyelet
After fixing the required height for yourself, you need to balance the trimmer. For this, the eyelet is rearranged, with the help of which the device is suspended from the belt, forward or backward. As a result, you need to attach the belt to the trimmer so that when you release the steering wheel, the knife or saw blade does not lie on the ground, but hangs above it without touching the surface. At what distance it will be located depends on the goals set.
Advice! A distance of 20-30 cm above the ground is suitable for mowing tall grass, and for lawns you need 5-10 cm.
Belt adjustment
To provide yourself with comfortable working conditions, you need to be able to properly put on a backpack strap. This process requires some skill, but then, after adjusting the backpack for yourself for the first time, it will be much faster and easier to put on.
Balancing the handles
An important step in adjusting the backpack belt is also adjusting the handles to the optimum level. When the operator is holding the lawn cutter, his arms should be relaxed and his shoulders should be parallel to his body. Therefore, after adjusting the double-shoulder strap, adjust the two-handed mechanism by moving it up or down. It is necessary to achieve such a result that the hands only set the direction, and do not hold the device. If after that the trimmer balance is again disturbed, you will have to repeat all the steps again.
Safety regulations
Among the safest and most popular trimmers, products from German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that you need to clearly know and follow when using a trimmer.
- Before use, it is necessary to read the instructions for use.
- You can not work with the trimmer in a state of fatigue, illness, intoxication.
- It is forbidden to use the scythe in explosive and fire hazardous areas.
- Do not mow during thunderstorms and rain, or after rain, when the grass is wet.
- You can work only during daylight hours, in good light conditions.
- Use only the type of fuel and lubricant that is suitable for the particular trimmer model.
- It is not recommended to repair the instrument yourself.
- Do not touch rotating or heating elements during operation.
- Do not smoke and light a fire while mowing, etc.
Important! When using the trimmer, there are other factors that are harmful to health: increased noise level, vibration, exhaust gases, high temperature of some parts, flying branches, etc. To minimize risks, you need to use overalls, glasses and headphones.
If you still have questions about the adjustment on the backpack belt of a particular lawn mower model, you can try to find the answers in the instruction manual attached to the product, or watch a video on the Internet, where it is clearly and easily shown how to set up and adjust the belt together with the lawn mower.
49290 / WLBCF310. Attaching double shoulder strap
Attaching the lawn mower to the belt
Depending on the model, the petrol braid can be fastened to the belt using a strap or loop. In the latter case, for balancing, you need to move it along the bar in order to get the desired result. In some cases, damping mechanisms are provided to reduce vibration and soften the sharp jumps of the trimmer.
Trimmer Backpack Strap. Intended Use
Many trimmer models are equipped with a regular oblique strap. For the job, however, it is best to purchase a backpack strap that is specifically designed for lawn mowers. Thanks to its clever design, it distributes the weight of the device evenly over the entire body. Padded shoulder pads reduce weight and relieve pain in the forearms. The rigid backrest distributes the load between the upper and lower back, excluding the lower back. The shock-resistant thigh protector prevents the mower from contacting the foot, so that it does not rub or transmit vibration. In addition, the belt provides:
- convenient transportation of the trimmer;
- comfort during operation due to the ergonomic position of the scythe relative to the body;
- work safety. the knapsack belt prevents the lawn mowers from slipping out of the hands when hard objects get under the knife.
Adjusting the shoulder straps
To distribute the load evenly over the shoulders and back, the shoulder straps need to be well adjusted. To do this, it is enough to tighten or relax the straps. they should not dig into the body or hang down. You can understand how the weight will be dispersed if you press the hook for hanging the scythe with your own hands.
Call us!
The strap is easily adjustable for a specific face of any person, thanks to the adjustable straps in height and width (you can tighten or loosen)
Quickloader Tie Down Ratchet Straps | QL4500 Tie Down Ratchet Strap Review
Spare parts can be sent to any city and region of Ukraine: Cherkasy, Zhashkiv, Shpola, Chigirin, Smila, Uman, Monastyryshche, Lysyanka, Buki, Zvenigorodka, etc.
Attaching the lawn mower to the belt
Depending on the model, the petrol braid can be fastened to the belt using a strap or loop. In the latter case, for balancing, you need to move it along the bar in order to get the desired result. In some cases, damping mechanisms are provided to reduce vibration and soften the sudden jumps of the trimmer.
»How to dress properly
How to put on the trimmer shoulder strap
Backpack strap for motorcycle It is convenient for long work with the trimmer.
Since the weight of the tool is at least 5-8 kg when loaded and fully equipped, and when mowing grass for a long time it is difficult to hold the brush in your hands, she came up with a backpack for a trimmer.
The shoulders have a foam insert that cushions the strain on the neck and shoulders.
The belt has a quick release clip. Easy to put on and take off.
A special padding is provided to prevent the tape from cutting into the lower back when loading it.
For easy removal of the braid, a quick-release latch is provided.
The suspension mechanism itself was invented on the principle of a carbine damper.
Balancing the handles
An important step in adjusting the backpack belt is also adjusting the handles to the optimum level. When the operator is holding the lawn cutter, his arms should be relaxed and his shoulders should be parallel to his body. Therefore, after adjusting the double-shoulder strap, adjust the two-handed mechanism by moving it up or down. It is necessary to achieve such a result that the hands only set the direction, and do not hold the device. If after that the trimmer balance is again disturbed, you will have to repeat all the steps again.
Petrol chain backpack with plastic protection
- Lozovaya
SPECIAL TOOL st. Roses-Luxembourg 52/54 - 38 (050) 336 88 83, 38 (067) 326 45 96, 38 (073) 169 79 55
CHN.
- Attributes:
What is a backpack strap
It should be understood that the weight of a filled lawn mower is on average 6-9 kg. And this device must be kept in limbo all the time. To evenly distribute the load, the backpack strap seems to encircle the body from all sides. The main load falls on the shoulders and back, so its upper part is supplemented with wide foam inserts and fabric straps. Further, the straps are lowered along the body and, with the help of a quick-release clip, are connected to each other in the chest or abdomen area. And so that the belt does not cut into the body during load, a wide and durable lining is provided. A plastic leg guard is attached to the belt. It has a carabiner for attaching to the trimmer and spring cushioning. Ease of unfastening and fastening of the lawn mower is provided by a quick-release latch located on top.
On a note! Different models of backpack belts may differ in the design of locks, carabiners, the presence or absence of additional pads and latches. However, the principle of the device and their work is the same.