How to Reel Fishing Line: Reel

Gathering gear for fishing, it is periodically required to change the fishing line on the reel. This is a fairly simple procedure. However, it has a number of nuances. From the correctness of the implementation of such a procedure will depend on whether the thread is flat during casting or if it starts to get confused. If the fisherman does the wrong thing, the thread may break. This causes a lot of difficulties. To avoid such troubles, it is necessary to consider in detail how to wind a fishing line onto a reel. This technology will be discussed in detail in the article.

The importance of proper winding

In order for fishing to be successful, you need to carefully prepare for it. Otherwise, a “terrible thing” can happen. the weather is beautiful, the bite is excellent, and tackle constantly malfunctions and interferes with taking advantage of favorable fishing conditions.

How to Reel Fishing Line: Reel

To prevent this from happening, you need to pre-configure all fishing gear. One of the most important stages of preparation for fishing is the correct winding of fishing line on the spool of the fishing reel. Failure to comply with the basic rules threatens the grief fisherman with entanglement and cliffs of fishing line, and fishing instead of pleasure will become a test for the nervous system.

The casting distance depends on the quality of such work. Proper winding ensures the casting of the bait to a distance that is most consistent with the technical characteristics of the reel.

In addition, high-quality winding prolongs the service life of the fishing line, reducing mechanical friction and reducing the risk of the appearance of a “beard” during casting, because of which it is often necessary to cut the fishing line. Therefore, before starting work, it is necessary to consider some tips of experienced fishermen on how to lay fishing line on the spool. This is a fairly simple procedure that even a beginner can handle.

Winding Profiles

In different models of reels, the turns of fishing line on the spool are applied in different ways. In high-quality products, a cylindrical and conical winding method is used. The laid fishing line in profile forms a straight line. With a cylindrical winding, this line is straight, parallel to the bobbin, with a conical winding, it is oblique.

The straight conical shape narrows to the front side of the spool, the reverse. expands. A straight cone reduces the friction of the fishing line. The reverse type of stacking reduces the likelihood of spontaneous line discharge.

There is a third type of winding. chaotic. Commonly used in cheap Chinese fishing rods. And if such winding can still be tolerated using an ordinary fishing line, then the use of a cord in such a coil should be abandoned. Bad casts, "beard", overlaps and entanglement are provided. This leads to failures during fishing, and can also spoil the mood of every fisherman.

What is backing?

It is usually difficult to determine how much fishing line to wind on a reel. It is believed that a standard bobbin holds a hundred meters fishing line with a diameter of 0.3 mm. However, progress has stepped far forward, and modern fishing lines are becoming thinner, without losing the margin of safety.

How many meters of fishing line to wind on a reel, each angler decides for himself, depending on the fishing conditions. Therefore, it often happens that the selected fishing line is much smaller than the spool can accommodate. The resulting free space needs to be filled with something. Some people use tape or kapron thread for this purpose, but this is not the best option. The glue on the insulating tape, which holds the lower turns of the fishing line, quickly peels off. A kapron thread dries for a very long time when wet.

Therefore, more and more anglers are inclined toward the American method. to reel the fishing line in the lower layer easier and cheaper, and to tie the main, better one to it. This rounds of an inexpensive thread is called backing, in our opinion. reeling. It connects to the main tape using a self-tightening double loop, clinch, or similar knot options.

Determining the amount of winding

In the question of how to wind a fishing line onto a reel, for beginners there is a difficulty in determining the amount of winding. It can only be established experimentally. Experienced fishermen are advised to act in reverse order.

Video: How to Reel Fishing Line: Reel

If there is a second coil of the same kind, you need to wind a fishing line on it first, and then a winding tied to it. At the same time, the basic rule should be remembered: it is only possible to wrap the fishing line on the spinning reel correctly only if the level of its upper layer does not exceed 3 mm from the spool rim. After that, you should rewind the thread to the main shula, already starting with backing, which, as expected, will be at the bottom.

If there is no second same coil, the measurement is made on the main coil, then the fishing line is unwound and rewound on it, already starting from the winding.

Spooling backing

Another important point in the question of how to properly wind the line onto the reel is its connection with the spool. Some fishermen do not fix the line at all, believing that it is long enough and never unwinds completely. This is the wrong approach. Having fixed the winding or fishing line in the spool, you can not be afraid of disruption of large prey or idle scrolling of the fishing line when fishing the fish.

Among the many different binding methods, the following are most common:

  1. A special clinch-like knot. It is very reliable and practically does not stretch.
  2. A self-tightening knot is a special kind of loop with some stretching. However, as a result of the tension of the fishing line, such a knot is tightened to the stop and holds perfectly.

The choice depends on the preferences of the fisherman. Both options are quite reliable. They will provide comfort while fishing.

Manual winding

You must also consider how to wind the line onto the reel manually. If the fisherman has telescopic spinning, it must be decomposed into working condition. This is not necessary for a plug rod; you can work with its lower part.

Attach the coil to the reel seat. There is a hole in the reel on which the fishing line is wound. A rod is inserted into it, for which you can use a pencil, pen, needle, etc. If the fisherman has an assistant, he will hold the axis onto which the bobbin will be untwisted. If there is no assistant, you can hold the rod yourself between the knees.

On sale there are special devices for unwinding fishing line from a bobbin. Their advantage is that they regulate the force when winding the line and make it uniform.

The line is threaded into the rings, from the smallest upper element to the reel. Then the thread is fixed in the spool with the scaffold open. After that, it is lowered into working position. You can start winding the fishing line by rotating the reel.

Hand-wound Precautions

Since the operation is performed with the required tension of the fishing line, you need to hand press it to the rod just above the first ring in order to adjust the tension. In this case, you should know how to wind the line onto the reel without cutting your fingers. You can put a glove on your hand. And you can skip fishing line between the pages of a small book, then it gets additional alignment during the winding process.


Many "craftsmen" come up with their own ways of winding. For example, you should consider how to accomplish the task with a drill. To do this, you need a nail that almost fits right into the bore of the spool and a rubber circle 7.5 mm thick.

The hardware is inserted into the rubber in the center and placed in the spool. The design is clamped in the drill chuck or screwdriver. The fishing line is fixed in the spool with a knot.

In one hand you need to hold the bobbin with thread for the central hole, in the other. a drill. Winding is done clockwise, adjusting the speed of the cartridge. How to reel a fishing line on a fishing reel correctly with such a device? To do this, you only need to drive the fishing line up and down, making sure that it lies evenly.

Spool storage rules

In order for the fishing line to last longer, you need to properly care for it. Sending tackle for long-term storage, the line should be completely unwound and thoroughly dried, otherwise it will lose elasticity. This is fraught with tears at the most inopportune moment. You can use a dryer to dry. When the fishing line is completely dry, you need to wind it on the spool.

In general, you need to dry the thread after each fishing. Only this should be done not along the entire length, but only on a site slightly larger than the length of the long cast.

Trimmer coil

There are times when the knowledge of the fisherman about the process of laying fishing line on the spool can be useful in a completely different area. For example, the question may arise about how to wind the line onto the trimmer reel. This is a very convenient tool for mowing grass in difficult areas that a conventional lawn mower cannot handle. The cutting element in this tool is the fishing line. Over time, it wears out and breaks. It needs to be changed periodically. Therefore, it is useful to know how the cutting element is replaced.

To do this, you first need to disassemble the trimmer head by pressing on the latch located on the body. The cover rotates clockwise. Take out the bobbin.

Cut about seven meters of fishing line. Its end is inserted into the hole of the bobbin. The required thread diameter is indicated by numbers on the inside. Also on the bobbin, the arrow indicates the direction of winding.

The fishing line is wound on both sides, and its ends 15 cm long are left free. Between the side of the spool and fishing line should be at least six millimeters.

The finished reel with fishing line is inserted into the mowing head. The remaining ends are inserted into the opposite holes of the bobbin and fasten them in the grooves on the head housing. The coil is tightly fixed and closed by the top cover. The tool is fully operational. Need to check his work.

Having considered how to wind a fishing line on a reel, you can easily prepare gear or other tools for use. The thread will not break or get confused. Her move will be smooth. Replacing the fishing line in different reels or even a trimmer will not cause any difficulties.