How to Remove a Trunk Spool

Using this or that instrument or device, sooner or later it is necessary to change some of its components, to refuel and so on.

For example, refueling a fishing gear trimmer coil is quite simple, but there are some nuances that cannot be ignored. Here we need accurate answers to the questions: how much and how?

Instructions on how to wind fishing line onto a trim reel

Here are the steps for winding a monofil fishing thread onto a trimmer spool:

• The end of the fishing line from the bobbin is pulled into the through rings of the finished gear.
• Open the scaffold.
• Using any fishing unit, attach one end of the monofilament to the bobbin.
• Perform several revolutions manually by moving the “wheel” of the spool.
• Now winding can be done using the handle.
• When winding is complete, close the fishing line.

In another method, a reel with a fishing line should be thrown onto a stick so that the reel rotates freely around its axis. Next, wrap the bobbin trimmer. It will not be very convenient here to wind one; it is better to resort to the help of a friend.

As for winding braids, then the following steps must be performed:

1. Dip the prepared bobbin with a wicker into a container of warm water, or at least into the water of a river or lake, right on the spot.
2. Now you need to carry out the winding. Due to the more or less softened fiber, the fishing line will lie down and wrap quite evenly and tightly.

Threading reels with various types of bobbins

It should be noted that there are several types of reels for fishing tackle:

• Inertial;
• Inertialess;
• Multiplier.

For each type of inertialess coil designed its diameter fishing thread. If the thread is thicker, then it will not work to thread into the spool. Difficulties will also arise if, for example, too thin a monophile is used, which is not intended for refueling a particular spool.

In the case of refueling with a non-inertia spool, one of two well-known methods is used: “cross-on-cross”. parallel winding, that is, the thread behind the thread lies parallel to each other.

Now about multiplier spools. Multiplier spools are subtypes of inertia. Many fishermen make the same mistake; they tie the end of the string to the farthest hole in this element. Doing this wrong is worth tying only for closely spaced holes.

Видео: How to Remove a Trunk Spool

The fishing thread of the bobbin reel is as follows:

1. First, the monofilament is fixed on the body of the spool.
2. Next, you need to attach the reel to the spinning and pass the free end of the scaffold through the right ring.
3. Tighten the device that protects the tackle from jerking fish.
4. Tighten axial brake.
5. Now you can carry out the winding, directing the fishing line and, thereby, controlling it.

How to remove the coil from the trimmer?

So that the assembly process is not long and tiring, it is best to stack the elements of the untwisted mechanism in order. This will not let you get confused.

Here is the parsing procedure:

1. The friction clutch nut is untwisted.
2. Next, you need to unwind all the small washers and gears.
3. It is necessary to remove the handle.
4. It is necessary to disassemble the coil mechanism.
5. The rotor is removed
6. Now the scaffold roller is being disassembled.
7. Then the coil is removed.

How to reel a fishing line on a trimmer reel (video for beginners)

What kind of fishing line is used for the trimmer?

To refuel the coil, one of the types of fishing line is used:. Monolesk. It is a universal fishing thread, consisting of a single thread. The composition includes plastic compounds, polyethylene and stuff like that.

Entire factories are engaged in the manufacture of monofilament, each time they try to make the fishing line as efficient as possible, "able" to create the closest game of the bait to the live one. Wicker. There are two types of braids: classic and braided cord in the shell.

Tips from experienced fishermen

Here is what professional fishermen advise:

• Do not wind too much fishing line. This suggests that if the permissible winding length is 100 meters, then in this case, you need to wind a little less. This will allow the device to work more correctly.
• When winding, the string should not be too tight or, conversely, weakened. And in that, in another case, it will not lie as it should. She can twist, go to the side, overlap and so on. Cone-shaped layering of the fishing line, that is, thickenings from one side or another, can also form.
• Winding should be carried out without reaching the top edge of the coil, about 1-2 mm, this distance can still increase slightly.
• If the line is periodically dumped during winding, then you need to take a little more than the previous distance from the side wall of the spool to the winded line. You need to increase literally by 0.5 mm.
• Quick winding of fishing line will not ensure its high-quality distribution over the surface of the spool. On the contrary, it can "twist" so that it will be difficult to fix it. The best option is average speed.

There are also devices that allow you to attach the reel directly to the rod. This allows you to rewind the fishing line, firstly, without outside help, and secondly, the refueling process is greatly simplified.

Now only pecks from me!

I caught this carp with the help of a bite activator. Now I never return home without fish! It is time for you to guarantee your catch. The best bite activator of the year! Made in Italy.

Now only pecks from me!

I caught this carp with the help of a bite activator. Now I never return home without fish! It is time for you to guarantee your catch. The best bite activator of the year! Made in Italy.