How to start a STIHL 180 chain saw when cold

STIHL chain saw fuel

STIHL power tools only work on a mix of petrol and oil. It is recommended that you use fuel with an octane rating above 90 and without additives. Otherwise there is a risk of damage to the clutch and gearbox.

To cut the fuel for your STIHL chain saw it’s best to use STIHL chain oil. Dilute the fuel with the lubricant in the ratio 50:1. Not following these tips can make the machine perform much worse. Oil can remain on the walls of the cylinder, blocking the spark.

STIHL 180 chain saw does not start? Prerequisites and solution!

Today the manufacturer STIHL is in a leading position among other companies that create the production of machinery designed for agricultural and construction work. Products of this manufacturer is famous not only for its highest level of quality, but also a good pricing policy and capacity of its models. How to start the STIHL 180 chain saw (STIHL ms 180 vs Husqvarna 236). This is one of the most recognizable global companies.

It’s probably quite difficult to meet a person who wouldn’t have had a chain saw of this brand. But the fact that out of 10 possible in 6 people definitely have them. STIHL 63pmx 3/8p-1.3 chain for rip sawing. STIHL chainsaw ms 180 c-be has a 2-year warranty. How to start the chain saw, then pull the starter motor until the chain saw does not start. And it’s not mind-boggling, because STIHL chain saws are power on par with sleek design. But unfortunately, even such giants of equipment from time to time break down and require some kind of repair. Buy chain saw STIHL ms 180 in Minsk. Price. We are now going to focus on one of the brands, namely the STIHL 180 chainsaw. Read about the STIHL ms 660 chainsaw here. Here we go.

Selection criteria for engine oil

A complete alternative to the recommended branded oils can be similar in performance products from leading manufacturers. As a result of natural selection on the unofficial ratings of consumer demand for many years leading motor and chain oil brands STIHL and Husqvarna.

  • It is strictly forbidden to use cheap analogues of unknown origin for the preparation of a combustible mixture for chain saws, as well as motor oils for mopeds and boat engines.
  • In order to avoid the risks of buying cheaper but low-quality counterfeit products, it is recommended to buy consumables from branded and licensed retailers.

The fuel mix is only put together in small quantities, enough for one-shot work. Do not use the fuel mix for a long period of time. longer than one month. because of the considerable deterioration of its performance.

The mixture is poured through a fine-mesh filter or chamois into the gas tank, from which it is piped to the carburettor inlet.

.Start your chain saw by following the instructions

Different chainsaws have different starting procedures. Let’s take a look at two of the most popular mechanisms that are used today to start a chainsaw. Let’s take the STIHL MS 180 and the Echo CS-352ES chain saws as an example. If you have a different brand of chainsaw, just try starting by analogy, since you most likely have the same or similar mechanism.

Before we begin the description of the starting process, I want to note that some chainsaws in the instruction says that before you start the chain saw, you need to turn on the emergency stop brake. They say it’s safer that way. But it’s harder to start with the chain saw if the brake is still fixed, so you’d better switch it off. If you do it right, it won’t do anything to you when you’re starting up. But if you are afraid that without a brake lock the chainsaw will hurt you when you try to start it, it’s better not to use it at all.

Now for a second method to start the chain saw.

Starting the STIHL MS 211 C-BE

The STIHL MS 211 C-BE is fitted with an additional manual fuel pump for easy cold starting.

start, stihl, chain, cold

Before you start the STIHL chain saw in the cold you need to pump fuel into the carburettor with a pump. Next, the instructions are no different from starting the STIHL 180 and follow the same algorithm.

start, stihl, chain, cold

What happens when you pump the primer and how it helps to start the saw more efficiently??

At the moment of starting the saw without primer a few strokes are made only for the gas pump to pump the fuel to the carburettor by the impulse from the crankcase of the saw.

The pump is installed in the fuel line and pumps fuel manually to the carburettor without lifting the starter motor. The effect of this action is obvious, the saw will start much faster.

Many owners of gasoline tools, mistakenly believe that the hand pump can pump too much fuel into the carburetor and for this reason will flood the plug. This is fundamentally wrong. к. system is able to circulate. Excess gasoline from the carburetor is routed through a hose designed specifically for this purpose back into the tank.

On a hot chainsaw, there is no need to use a primer, t. к. The fuel in the carburetor is sufficient to start.

STIHL chain saws are almost always started in the same way unless a decompression valve and fuel primer are additionally installed. These devices are designed to facilitate the starting process and perfectly cope with their functions.

Virtually everyone who lives in a private home or has a summer cottage, from time to time uses a chainsaw powered by a gasoline internal combustion engine. Beginners often have a question about how to start the chainsaw correctly. Here it is worth noting that professional, semi-professional and household tools wind up approximately the same. How to do it. this article will tell you.

How to run-in a chainsaw: step-by-step instructions

Before the running-in period, the first start of the chain saw. It is necessary to prepare and properly install the headset. The fuel-air mix should be waiting in the right place. The quality of the running-in depends on it.

Starting a Stihl Chainsaw the correct way. NEVER flood it Again!

Here you have a brand new, shiny tool in front of you. Looking at it begs the question, “Now what should be done?”. After reading the instructions, you find out that a running-in is needed and the first start-up should be special. How to start a new chainsaw is not yet clear, but now everything will become clear.

The first start we necessarily do with a headset. You should not start the engine without the bar and chain: the tool should work with them, so it will get the proper load. It is not a good idea to go too fast, because this will negatively affect the chain saw’s performance in the future.

After installing the headset, you need to do the following things:

Why do you need to run in a new chain saw?

This is a complex process that requires a responsible approach. A chainsaw is not the exception, but rather the rule. All tools with a two-stroke engine require a running-in period. Without a proper running-in, the life of the tool will be much shorter and the tool will perform worse. Anyone who has purchased this tool should know how to run-in a chainsaw.

Why do it?? During these manipulations, the engine parts and the saw’s headset are lapped.

You need to understand that you need to study the instruction manual of the tool in detail. You have to remember it and use all the recommendations. There is also a lot of information in there about what not to do or what you absolutely must do. If you are an “amateur” and have never had to deal with the running-in of a chainsaw, the instructions for your tool should become your desk book.

We begin sawing the MS 211 C-BE brand

If you too have been among those consumers who have been wondering how to set up a “quiet” chainsaw, you might consider the other model mentioned above as an example. It has a feeding system equipped with a manual pump, which makes it easier to start the saw when it is cold.

start, stihl, chain, cold

The instructions contain an additional point, which indicates that you must pump fuel to the carburetor before starting from the pump. Then follow the principle described for model 180.