How to wear a shoulder trimmer

A little about physiology

In another way, this exercise is called an army press. It involves two joints at once: the elbow and the shoulder. The exercise is aimed at developing deltas.

The brachial muscle consists of three bundles: anterior, middle and posterior. The front one is responsible for all pushing movements. The posterior hemisphere is for swings and for pulling movements. The standing barbell press primarily develops the anterior brachial muscle. Part of the load also goes to the middle. Nothing goes to the back, so the bar should not be placed behind your head. Otherwise, you can easily get hurt. Especially when weights will grow over time.

Bench Press Standing. Shoulder Exercise

Yaroslav Brin is known as a writer, bodybuilder, video blogger and fitness trainer. He decided to tell you how to effectively train the shoulders with the help of a standing barbell press.

Muskul.pro bursts into YouTube! Help the development of our channel with your subscription. It’s easy for you, but we are pleased)

The nuances of doing the exercise

First, it is worth paying attention to the grip width. If it is wide, then the pectoral muscles will connect to the deltas. It’s much easier to do this, but it’s the wrong technique. If the grip is too tight, you will engage your triceps. Therefore, grasp the bar so as not to engage other muscles. Recommended grip. slightly wider than shoulder width.

Second, look at the range of motion. We lower the barbell to the chest, and then raise it, while trying not to create a strong load on the elbow joints. To do this, the elbows do not need to be fully extended at the top point.

Thirdly, with effort we exhale, while lowering the bar we inhale.

Fourth, the legs should be parallel to each other. Turn your feet at a 45-degree angle for maximum comfort. You need to stand in one place, you do not need to go anywhere from the conventional line.

Fifth, when lifting the projectile, never look at the barbell. Thanks to this approach, you will not have a curvature of the spine. Train yourself to look into the upper far corner. This should be done in all exercises in which you need to keep your back straight. The spine must not bend. Otherwise, the load from the shoulders will be significantly reduced. It is easy to injure your back when creating unnecessary stress.

Sixth, you can wear a weightlifting belt, but only when you are working with maximum weights. On the first approaches, it is not needed. Keep your abdomen as pulled in as possible during the exercise. So there will be no unnecessary stress on the abdominal cavity.

Seventh, if you do not feel the work of the deltas, then when performing the exercise, bring your hands back a little. Then feel the tension in the middle beams.

Second option

You can tie a hijab under the back of the head. a scarf is put on the head so as to close the hairline along the forehead, but leave one free edge longer than the other. The ends are tied under the back of the head, after which a short edge is wrapped around the forehead and fixed on the opposite side. After that, under the back of the head, the long end of the scarf is circled around the neck, and it is stabbed on the opposite side under the temple. There is one free end left. it is taken by the very tip and stabbed at the back of the head so that the scarf lies freely, covering the chest and neck, under the chin.

Why tie a hijab?

The question of how to tie a hijab is of interest not only to Muslim women: if you are going abroad to one of the Muslim countries, then lessons on how to correctly and beautifully tie a hijab can be useful to you if you set your goal not only to travel, but to try to understand the culture of this country. her traditions.

By wearing the hijab, Muslim women express their obedience to Allah Almighty, and also hide their beauty from strangers so as not to provoke men’s interest in themselves as a sexual object. For many Muslim women, it is very important to be perceived and appreciated not only by their appearance, but also by their intelligence, intellect, therefore, if a woman put on a Muslim headscarf, then she put it on with pride and wears it as a symbol of self-respect, her dignity.

The headscarf helps Muslim women to stop strangers from treating them as sexual objects and to be more considerate of their personality. Many women who wear a Muslim headscarf are full of dignity and self-respect.

How to tie a hijab

Hijab is an indispensable attribute of any Muslim woman, and it is inseparable from the image of a pious Muslim woman. Girls in hijabs cause an ambiguous reaction in society, but not only in the tradition of Muslim women there is a requirement for a girl to wear a headscarf. this tradition appeared even before the birth of Islam, and even among many Slavic peoples it was condemned if a woman did not wear a headscarf and walked with her head uncovered, also such canons adhere to the Christian religion.

The very name “hijab” comes from the word “hajaba”, which translated from Arabic means “to hide from sight” or “hide”. Initially, this term meant any clothing, but the modern Muslim world calls the word “hijab” a woman’s headscarf, which should be tied so that it covers the head, neck and shoulders. Muslim women must wear a headscarf if they are going to visit a public place.

Often the concept of “hijab” can be confused with concepts such as “niqab”, “burqa”, “veil” and other names of elements of women’s clothing that are worn on the head. The niqab is also a Muslim headdress worn on the head, which is equipped with a slit for the eyes and covers not only the head, but also covers the face. The burqa is not a headdress, but women’s outerwear. made like a robe, which has a mesh element that covers the face.

How to wear a hijab correctly?

The hijab should be tied so that it covers the Muslim woman’s head, neck and shoulders. The sizes of the hijab can be very different, it is important that it covers the exposed parts of the body. It should be emphasized that for a Muslim woman there is no difference in whether she wears a hijab on niks or in everyday life; in any cases, clothes should cover all parts of the body, with the exception of the face and hands, without emphasizing the female figure. Muslim wedding dresses on nicknames should also not tighten the waist, emphasize a woman’s breasts, or expose the neck and arms. Women’s translucent veil through which the bride’s hair is visible, worn on niks, is also not a hijab and is prohibited in Islam.

To properly wear the hijab, a Muslim woman should first collect her hair in a ponytail or a bun and pull it back, tie it or pin it at the back of the head. Then the hijab needs to be laid along the forehead line, and secured under the back of the head and on the chin.

Many Muslim women put on a cap first, and only then put on a hijab on top. the cap is used to hide the hair. this is the right method and very convenient. The hairline must be hidden under the hijb.

A woman who wears a hijab must also remember that her clothes must also meet certain requirements. It will be inappropriate to wear a headscarf if a woman dresses provocatively and immodestly. Many women, going to Arab countries, pay attention to the acquisition of a headscarf in order to tie it in accordance with the customs of the country they are going to visit, but do not pay due attention to how they dress. This is the wrong attitude: if you want to wear a hijab, then pay attention to clothes, you should dress modestly and restrained.

First option

You can tie the hijab on one side: fasten the hijab under the chin, leaving the ends of the stole hanging freely, then throw the left free edge over the left shoulder and fasten it at the back of the head. The right free end should also be slung over the left shoulder so that the scarf covers the head. Next, the right edge should be stabbed in the temple area.

How to tie a hijab beautifully?

Muslim women know how to tie a hijab beautifully and in a variety of interesting ways. This can be gradually learned, although it may take some effort and time at first. But if you learn to do it correctly, then you can frame and beautifully emphasize your face, become much more feminine with the help of a beautifully tied hijab.

How to tie a hijab in an original and creative way?

There is also a fun and daring way to tie the hijab that the most creative Muslim women can use. This option is original and creative. You need to wrap the scarf along the line of the forehead around the head, fold its free ends together and throw them together over the right shoulder. After that, we wrap the ends of the neck and the edge of the scarf again, passing under the back of the head, to the right shoulder. We repeat this turn again, but this time it is not necessary to press the scarf tightly to the neck so that it covers the shoulder freely. You need to tie a scarf so that its free edge lies freely on the right shoulder, and then at shoulder level you need to tie it with a weak knot.

Double necklace

For this necklace, you can take a short thin scarf. It will look even more impressive if the scarf is fringed.

Throw the scarf around your neck and tie two knots at the side. Hide one end of the scarf in the back, and pass the front end from the bottom up through the loop formed and straighten.

15. Ascot

For this knot, you can take any scarf. Even a short one will do, since this knot looks best under outerwear. Tie the scarf in a knot around your neck. Flatten the front strip and hide the ends under the jacket or coat.

24. Contrast snood

Take two thin scarves in contrasting colors. Both long and short scarves will work. Tie them on both sides with a double knot and wrap the resulting snood several times around your neck. Hide the knots under the fabric.

26. Hidden Loop

Wrap a long, not too thick scarf around your neck twice and hide the ends at the back. So the scarf can be worn with both outerwear and light things.

18. Narrow collar

If the last step of the previous method is not to your liking, then just hide the ends of the scarf inside. The method is the same, but the scarf looks different.

25. Tie

Any scarf will work for this method. Throw it around your neck and wrap one half of the scarf over the other. Then pass it through the resulting loop from outside to inside and smooth the knot. It is better for women to make a knot at about chest level, and for men it is better to tighten it around the neck and hide it under outerwear.

Fake node

Take any scarf and put it around your neck. Wrap one half of the scarf around your palm, thread the end of the same strip through the resulting loop and turn the knot over. Then run the other half through it and tighten around your neck.

How to dress your child in summer

It would seem that in warm summer weather there should be no question of how to dress a child for a walk. However, many mothers of young children (especially babies) are reinsured, or vice versa. they forget about basic things like a headdress. So how to dress your child in summer?

Some parents blindly adhere to the rule that the child should wear one more layer of clothing than himself. Perhaps it works in winter (although this is doubtful), but not in summer. On a walk, the child will actively move and will certainly sweat, as a result, the slightest breeze or a couple of minutes under the air conditioner will be enough for him to catch a cold. And mothers are then surprised: how can it be, after all, I dressed the child warmly. That’s right. it’s too warm. Overheating can even lead to thermal shock.

If you want to dress your child correctly in the summer, dress him the way you would dress yourself: you should not wrap up the child if it is hot outside. It is better to take a warm long-sleeved jacket with you for a walk in case the weather turns bad. Dress your child in clothing made from natural materials such as linen or cotton. No synthetics! It is worth choosing clothes in light colors.

In sunny weather, T-shirts should be preferred to T-shirts or shirts with sleeves that cover the shoulders: it is this part of the body that burns the fastest in children. The same applies to outfits for girls: instead of a sundress, it is better to wear a dress with sleeves. If the sleeves are light and loose, they will not cause any discomfort to the child.

Also, in sunny weather, the child needs a hat. In cloudy weather, even in warm weather, there is no need for it. Not all children love hats, in this case, offer your child clothes with a hood.

It is also necessary to protect the eyes of the child from the bright sun. Older children may be encouraged to wear sunglasses. Just keep in mind that they must be of high quality, no cheap glasses with plastic lenses, which hardly protect from the sun, but they are very tired of the eyes. Instead of glasses, you can offer your child a light cap with a visor.

Hanperal Double Shoulder Strap for Trimmer & Brush Cutter

All these recommendations on how to dress a child in summer apply to older children who do not lie in a stroller all the time for a walk, but know how to walk themselves. How to dress an infant in summer so that he does not freeze and overheat?

First of all, mothers put diapers on the child. where is it without them. Please note that at temperatures above 25 degrees, a child in a diaper will feel hot, this can result in skin problems: irritation, diaper rash, etc. Therefore, in extreme heat, it is better not to put a diaper on a child. Instead, put cotton panties on him and place a disposable absorbent diaper in the stroller.

In cool (up to 18 degrees) weather, you can dress your child in a cotton jumpsuit (slip) or a combination of pants, a body with long sleeves, socks and a thin hat or cap. An option for warm weather is a light undershirt, T-shirt, bodysuit or sundress. Clothing should be light, light, natural fabrics. In case of a cold snap, take a light blanket with you for a walk with which you can cover your child.

If the child is in a stroller, a canopy will protect him from the sun (just do not curtain the stroller too much so that the child can get enough fresh air). And if during a walk you carry a child in a sling or in your arms, you definitely need a panama from the sun.

When choosing clothes for a walk with a child, keep in mind that you need to take into account not the temperature shown by the thermometer, but the so-called comfort temperature, which is calculated taking into account the strength of the wind. For example, dressing a child in the summer in warm, but very windy weather is the same as in cool, but calm.

When deciding how to dress a child in the summer, you should not rush to extremes: the child should not be dressed too warmly or too lightly. Just be sensible, dress your child for the weather and bring warm clothes with you in case of a cold snap.

From birth to 3 months

You can start walking with a baby born in winter only after 2-3 weeks. The first walk should last no more than 10-15 minutes, and the next day you can add about 5-10 minutes. Bring the time up to 30-40 minutes, and then up to 1.5-2 hours. But if the temperature is below zero by 10 degrees Celsius or more, it is better to stay at home that day and ventilate the room well.

This is the age when the baby is completely motionless. In winter, he moves, of course, in a wheelchair, and the maximum movement that he can do is twist with arms and legs. And even then in warm and dense winter clothes, an envelope or overalls, he is unlikely to succeed. Therefore, it must be remembered that a baby can easily freeze without active movements if he is not dressed warmly enough.

The ideal clothing for winter walks at the age of 0 to 3 months will be an envelope. it is suitable for both discharge and walking. The envelope retains heat well and will not let the baby freeze. Such children’s clothing is made of hypoallergenic materials, with a moisture and windproof outer layer.

Internal insulation. most often silicone, synthetic winterizer, holofiber. Natural down is used less often. The envelope can be adjusted in length to suit older people. Also, you can put the baby in it both in a blanket and without, open or close completely.

3 to 6 months

At this age, the child still practically does not move when it comes to walking outside in winter. But still, now he should be given more freedom, especially if you spend a lot of time walking. It is now better to take an envelope not in the form of a whole bag, but with handles and a hood, like a full-fledged jacket. The bottom can still be fastened completely and cover the legs.

Do not forget about several layers of linen. The first layer is underwear. This is a diaper, bodysuit or romper, undershirt, warm socks. The second layer should be a jacket and pants or a warmer jumpsuit, for example, made of fleece. At this age, it is better to have a jacket and pants or overalls with closable arms and legs. then you don’t have to put on mittens separately. Put on the envelope jumpsuit described above.

How to dress your baby correctly in winter?

For each age of the child, a certain set of clothing is required to go out. Especially if we are talking about the winter period, when it is cold outside, there are frosts, the wind is blowing and precipitation falls. While the baby is not yet actively moving, he needs one child’s clothes, and when he is already running, jumping and literally cannot find a place for himself, it is completely different. We decided to figure out in more detail how to dress a child correctly in winter, depending on his age.

6 months to 2 years

This is the period when the baby will definitely not want to sit in the stroller. To run, walk, or at least stand outside of it. this is the goal of a small child who has stood on his feet and learned to walk. For this age, you will need a jumpsuit in which he can already walk fully with his own legs. That is, the closed envelope will no longer be relevant. The jumpsuit should unfasten along the entire length of the body, fit well the ankles and wrists of the child, be in quiet places on comfortable and soft cuffs. Above, a hood or at least a high collar is desirable.

Pay attention also to the quality of the external material. it must be waterproof, resistant to mechanical damage, not blown by the wind. It is still better to prefer the inner insulation, synthetic, high-tech, which removes moisture from the body, but retains heat. You should not choose too thick insulation and bulky volumetric models “for growth”. Also, the jumpsuit should be easy to clean and dry quickly. It is better to purchase 2 sets for walking.

2-6-7 years old

For children from 2 to 3-4 years old, it is better to purchase not a completely one-piece overalls, but a semi-overalls with a jacket. Such children’s clothes are usually on braces, pulled over the shoulders, or without sleeves. They will not slip even with the most active games and movements. And the jacket can always be removed in a warm room, which is very convenient if the baby goes to kindergarten. And yes, to the toilet while walking or in institutions too. Yes, and you have to wash your pants more often, but a jacket is not necessary every time.

After 4-5 years of age, the child can be safely dressed in a split suit for walking, reminiscent of an adult ski suit. But still, it is important here that the back is not exposed if the jacket is lifted up. Therefore, it is still better to wear semi-overalls instead of ordinary pants, or pants with suspenders until the age of the baby goes to school.

Fastening the brushcutter to the belt

Depending on the model, the petrol braid can be fastened to the belt using a strap or loop. In the latter case, for balancing, you need to move it along the bar in order to get the desired result. In some cases, damping mechanisms are provided to reduce vibration and soften the sudden jumps of the trimmer.

What is a backpack strap

It should be understood that the weight of a filled brushcutter is on average 6-9 kg. And this device must be kept in limbo all the time. To evenly distribute the load, the backpack strap seems to encircle the body from all sides. The main load falls on the shoulders and back, so its upper part is supplemented with wide foam inserts and fabric straps. Further, the straps are lowered along the body and, with the help of a quick-release clip, are connected to each other in the chest or abdomen area. And so that the belt does not cut into the body during load, a wide and durable lining is provided. A plastic leg guard is attached to the belt. It has a carabiner for attaching to the trimmer and spring cushioning. The ease of unfastening and fastening the brushcutter is provided by a quick-release latch located on top.

On a note! Different models of backpack belts may differ in the design of locks, carabiners, the presence or absence of additional pads and latches. However, the principle of the device and work is the same for them.

Adjusting the shoulder straps

To distribute the load evenly to the shoulders and back, the shoulder straps need to be well adjusted. To do this, it is enough to tighten or relax the straps. they should not dig into the body or hang down. You can understand how the weight will be dispersed if you press the hook for hanging the scythe with your own hands.

Balancing the handles

An important step in adjusting the backpack belt is also adjusting the handles to the optimum level. When holding the brushcutter, the operator’s arms should be relaxed and the shoulders should be parallel to the body. Therefore, after adjusting the double-shoulder strap, adjust the two-handed mechanism by moving it up or down. It is necessary to achieve such a result that the hands only set the direction, and do not hold the device. If after that the trimmer balancing is disturbed again, you will have to repeat all the steps again.

Balancing the braid by moving the eyelet

After fixing the required height for yourself, you need to balance the trimmer. For this, the eyelet is repositioned, with the help of which the device is suspended from the belt, forward or backward. As a result, you need to attach the belt to the trimmer so that when you release the steering wheel, the knife or saw blade does not lie on the ground, but hangs above it without touching the surface. At what distance he will be, depends on the goals.

Advice! A distance of 20-30 cm above the ground is suitable for mowing tall grass, and for lawns you need 5-10 cm.

Safety regulations

Among the safest and most popular trimmers, products from German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that you need to clearly know and follow when using a trimmer.

• Before use, it is necessary to read the instructions for use.
• You can not work with the trimmer in a state of fatigue, illness, intoxication.
• It is forbidden to use the scythe in explosive and fire hazardous areas.
• Do not mow during thunderstorms and rain, or after rain when the grass is wet.
• You can work only during daylight hours, in good light conditions.
• Use only the type of fuel and lubricant that is suitable for the particular trimmer model.
• It is not recommended to repair the instrument yourself.
• Do not touch rotating or heating elements during operation.
• Do not smoke and light a fire while mowing, etc.

Important! When using the trimmer, there are other factors that are harmful to health: increased noise level, vibration, exhaust gases, high temperature of some parts, flying branches, etc. To minimize risks, you need to use overalls, glasses and headphones.

If you still have questions about the adjustment on the backpack belt of a specific brushcutter model, you can try to find the answers in the instruction manual attached to the product, or watch a video on the Internet, where it is clearly and easily shown how to set up and adjust the belt along with the brushcutter.

Trimmer Backpack Strap. Intended Use

Many trimmer models are equipped with a regular oblique strap. For the job, however, it is best to purchase a backpack strap that is specifically designed for brushcutters. Thanks to its clever design, it distributes the weight of the device evenly over the entire body. Padded shoulder pads reduce weight and relieve pain in the forearms. The rigid backrest distributes the load between the upper and lower back, excluding the lower back. The shock-resistant thigh protector prevents the brush from rubbing or transmitting vibration. In addition, the belt provides:

• convenient transportation of the trimmer;
• comfort during operation due to the ergonomic position of the scythe relative to the body;
• work safety. the knapsack belt prevents the brushcutter from slipping out of the hands when hard objects fall under the knife.

Belt adjustment

To provide yourself with comfortable working conditions, you need to be able to properly put on a backpack strap. This process requires some skill, but then, after adjusting the backpack for yourself for the first time, it will be much faster and easier to put on.

How to properly adjust the belt of the petrol cutter for yourself

Service center specialists often complain about consumers of household garden equipment, who, even at the stage of its assembly and the first start-up, make mistakes and disable the equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after an incorrect assembly, when extra parts were discovered, or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household gardening equipment. You just have to be careful. We will give as an example the assembly procedure for the Stihl FS 130 petrol cutters, supplementing our instructions with illustrations.

You need to start the assembly by opening the box and checking the complete set of the unit. If everything is in place, then we have to attach the handle to the bar with the motor, put on the belt, attach the protective cover and cutting elements.

First you need to get the handle and unscrew the thumbscrew that secures the upper part of the support without losing the spring.

We insert the handle into the socket and fix it without tightening too much. We will adjust the final position after the final assembly of the brushcutter.

We put the unit control knob on the handle tube and tighten the fastening bolt. For this, a universal key is included in the kit.

All controls for the Stihl FS 130 petrol cutter are located on the handle. These are: the throttle lever, which has protection against accidental start-up and the switch-off lever of the unit, which is controlled by the thumb. In the modification of brushcutters with a D-shaped handle, the controls are located next to the engine on the boom.

We put a plastic protective cover. If you plan to use only a knife, then for its work we use part of the casing (in the picture it is colored orange).

If there is work to be done with a cutting line, then a plastic skirt is additionally put on the protective cover of the chainsaw and a knife is placed to cut the line. Some variations of this model may have a universal cover or two different covers. one for the line and the other for the knife.

Sliding the skirt over the casing, you need to check the reliability of its attachment. Sometimes it may be necessary to fix this protection with another screw.

Now you need to put a knife for cutting the line and fix it with a screw.

It remains to install the reel, having previously loaded it with fishing line. The coil is screwed onto the shaft (as shown) or fastened with a special nut. Note that the threads on the shaft are usually left-handed. How to thread the line into the reel, read the instructions.

If a knife is required, then we put it instead of a coil. The knife is equipped with a protective cover so that it does not burrow into the soil during operation. After installing it, do not forget to rotate this cutting element and make sure there is no backlash.

Well, the last, the simplest, stage is the installation of a metal clamp on the bar, i.e. suspension strap mounts.

After the petrol brush is assembled, we put on a shoulder strap or a belt knapsack harness (depending on what is given in the kit) and adjust them to the figure. Fill in the gasoline mixture, start the engine. and go ahead.

How to put on the trimmer belt video

Recent comments

How much to brush your teeth correctly

We Brush Your Teeth Correctly Currently, there are both general and individual recommendations regarding the correct cleaning of teeth and oral cavity. And the question is, how long does it take to clean

How to properly cut grass with a trimmer?

The main thing is to correctly adjust the trimmer belt so that the drum with the line does not crawl along the ground.

Make the right gasoline-oil mixture.

Do not use a line that is too thick. it picks up speed and overloads the trimmer.

Do not be afraid to give it revs.

STIHL Brushcutter Harness Setup

Do not wrap too much line on the drum, and do not wind it too much.

Stop and empty the trash from time to time.

Lubricate the trimmer cable and the gear train (if any) with grease.

The technique of mowing grass with a trimmer is not very complicated and takes into account the need for:

• decide exactly how you are going to mow. Can be folded, can be across.
• choose a place so that as a result a bald patch does not appear and the site looks harmonious
• understand what exactly you are going to mow, and depending on the choice, put the right knife. They are different. For example, hay or weed. You also need to set the speed.
• of course, it is necessary to prepare both clothing and protective equipment. No matter how experienced you are, you must wear glasses. and not forgetting headphones and long clothes.

All the details of the technique are on the video how to mow with a trimmer.

add to favorites link thank

First of all, inspect the area that you have to mow. Cut bushes or large flowers that cannot be cut by yourself.

Always start in an easy spot where there is little grass. See if the property has slopes or ditches. Easiest to cut across a slope.

Determine the direction of the grass. It is easier to mow if the grass is tilted forward.

When it comes to clothing, you should always wear glasses and boots. Anti-vibration gloves will also work.

Use different knives depending on the density of the grass.

Another tip: try to mow at the same speed. This will help your mower last longer. If you stop and immediately pick up speed, then the trimmer will wear out faster.

Cutting with the trimmer correctly:

• choose the right line. For different tasks, there are two different subjects. fishing line and knife. A line that is too wide is undesirable as it will overload the trimmer. As a rule, there is enough fishing line in a simple area.
• when the cutter is installed (fishing line or knife), it is necessary to tighten and secure the nut.
• check charge or fuel. Put on the belt comfortably.
• the movements when mowing with the trimmer must be thought out. The algorithm is as follows: right-left-left-right. This will give maximum results. And be attentive to your work. It is necessary to control that there are no children or animals near you. You should also wear a mask to protect your eyes.

add to favorites link thank

The first step is to adjust the trimmer belt so that the drum is not touching the ground. Further, it is important to remember that due to the thick line there will be an overload of the trimmer, so do not overdo it with the thickness.

You should not wind a lot of fishing line on the drum.

Remember to clean your trimmer periodically.

Be sure to lubricate the cable.

The trimmer is very convenient as it can be used in a wide variety of places, including difficult terrain and areas near trees. If you are cutting tall grass, start with the raised tops first and then continue with the bulk.

add to favorites link thank

Use the trimmer as directed. The electric scythe (that is, the trimmer) is good because it does its job well in hard-to-reach places. Therefore, the trimmer can be used near trees, fences in relief areas. And not only for mowing the lawn, but also for ordinary grass.

The main thing. this is to make sure that the weeds do not have time to give seeds and mow them on time.

If you did not have time to mow the grass before the moment it gave the ears, then first mow the tops of the spikelets and burn them. And only then mow the grass itself, and put it in compost.

add to favorites link thank

In almost all trimmers (if there are no special ones), the line or the disc rotates clockwise. That is why it is better to mow the grass with a movement from right to left (a movement that resembles the movement when mowing with an iron scythe). Can be mowed by tilting slightly towards the mowing side.

You need to mow with calm movements, not jerks. Mow grass half the length of the line. If you grip more, the trimmer will do the trick, but the grass can clog the space between the spool and tube.

Mow with full throttle.

add to favorites link thank

Before mowing the grass, first adjust the line and secure it well in your cavity so that the line does not dangle or go there. here. Next, fill in the fuel accordingly (if you do not have an electric trimmer), which consists of special oil and gasoline. Next, start mowing the grass with smooth movements (not fast) to the right and left. Do not try to chop off the thick stems of plants often, as the line will run out in a moment, and you will have to tune the reel again. In dense places, the main thing is not to spare the gas)

add to favorites link thank

Trimmer from the Varyag company koshu according to the instructions:

Step 1. Installing the cutting device.

Depending on the type of weed, we choose a cutting tool: for soft-stemmed grasses. fishing line, for hard-stemmed and small shrubs. a knife. We unscrew the nut of the cutting mechanism and install the cutting tool. Tighten the nut. the mechanism is ready for operation.

Note: some trimmers do not have interchangeable cutting tools, so you can start using them right away.

Brush Cutter Harness

Step 2. Preparing the trimmer for work.

If the trimmer is electric, charge the battery or turn on the motor. If it is gasoline, fill the tank with fuel. Then, depending on the type of trimmer, we adapt it to ourselves (the upper motor. is hung with a loop on the shoulder, the knapsack. by the shoulders, the lower upper arm. we grab the handles). Hold the trimmer over the grass so that its cutting mechanism is parallel to the area to be treated. We start the engine.

Step 3. Mowing.

The grass trimmer is mowing with simple movements. It is important to remember that the cutter bar of the device rotates counterclockwise so that the cut grass will fall onto the already worked area. The first is from right to left in front of you (this is how we cut off the top of the grass). The second is from left to right (this is how we remove the remnants of the grass).

It is better to divide a large area of ​​the cultivated area into squares, and mow the grass on them, moving from one to the other along the outer side of each square.

When mowing grass on slopes, it is recommended to mow from below, moving parallel to the sloping area. We reached the edge, returned back, became a little higher. and we repeat the same route. until the site is completely mowed.

To mow grass in an area where there are trees, it is better to use a line cutting device, and you need to mow, passing the area around the perimeter, bypassing the tree around the trunk.

Step 4. Finish work.

After the end of the mowing of all the grass on the site, turn off the engine, remove the trimmer (for shoulder and backpack devices), clean the cutting mechanism of grass residues.

Interesting