How to wind a fishing line on a lawn mower spool

Safety Precautions

For a quick and safe change of line on the mower reel, you must follow the safety rules. Before removing the spool to wind the line onto the mower, the machine must be disconnected from the power supply (if the mower is powered by electricity). Here we would like to mention the rating of electric lawnmowers on reliability, which will help you choose a safe helper.

wind, fishing, line, lawn, mower

Another important safety rule that must be observed is to press the lock button. You can find out where it is located on the machine from the instruction manual. You can find, for example, instructions for the manual petrol lawnmower here.

Don’t forget that the cutting attachment needs to be adjusted. There is an adjustment button on the body of the machine. If the process does not start automatically and there has been a loosening of the thread tension, then the button is clamped, and the line is pulled with force from the spool.

It should be remembered that changing the line in the lawnmower is an important process that requires responsibility. Everything has to be done in stages, and only a special plastic line has to be inserted into the reel. This will not fit an iron rope, some high quality wire or even a reinforced fishing line.

How to tuck the fishing line into a STIHL grass trimmer reel

For any electric or gasoline grass trimmer, you can use lines from different manufacturers. Nevertheless, consumables of the same brand as the tool remain the best option. It is believed that in this case, it will benefit the longevity of work and even reduce consumption.

IT IS IMPORTANT TO REMEMBER! Do not use fishing line or metal cables for a grass trimmer. This substitution is inefficient and dangerous. The line can injure not only the mower himself, but also those around him.

As for the length, it is worth counting on the estimated frequency of use of the grass trimmer. The more often, the more you should stock up on consumables. Information about the possible diameter of the line will be found on the body of the grass trimmer reel. Most likely there will be a range of. Thickness varies from 1.2 to 4 mm. Choose the right option, taking into account the peculiarities of the area to be treated. The larger the diameter, the easier it is to cut tough grass.

See also  Filling a fishing line into an automatic grass trimmer reel

Choosing a line

In order for the threading of the line into the trimmer head to be successful, it is important not to miscalculate the choice of consumable material. The thicker the cord you tuck in, the thicker and tougher the grass it can cut. A multipurpose line of 2 mm diameter is often used. You can choose the right diameter for your mower using the following methods:

  • Look for information on line thickness in the instruction manual supplied with your trimmer.
  • Pay attention to the bobbin itself. Sometimes there is information on it about the possible line diameters.
  • Another option is to try inserting a cord into the outlet opening. If it passes through without difficulty, then the chosen line diameter is suitable for use.

Grass trimmer reel You can choose the cord according to the type of motor. If the fishing line is too thick, the resistance to rotation will increase. the motor will then overheat greatly and will soon fail. Helpful recommendations:

  • For an electric device with a motor under 500 V, a 1.3 mm thick line is suitable. If you don’t have one, you can use 1.6 mm cord. If more than 1 kW, choose a 2mm cord.
  • The gasoline grass trimmer has the importance of the shaft mower. For the bent version often a 2 mm cord is used. If the shaft is straight, install 2.4 to 2.5 or 3 mm filament. The thickest cord is installed on powerful devices. from 1.3 kW.

Pay attention to the type of cord cross-section as well. Some popular options:

  • The most common lines with a circular cross section. They mow fresh grass well, but do less well with shrubs, dead wood.
  • Twisted (spiral) cord is not very strong, but not bad for thin young grass.
  • Serrated filament with sharp edges is ideal for large weeds in a neglected area.
  • Rectangular, starred or square grass trimmer lines can mow the lawn more evenly, but they are not very durable.
  • The strongest is a two-piece cord with an inner core and a circular section.

Types of fishing line for grass trimmer Note that you can not use wire, metal strings and ropes, as well as ordinary fishing line instead of fishing line. The device will be dangerous to both the user and others. So the rope or similar products will gradually start to work, as a result, their ends will unravel, and the small pieces will fly with great speed.

wind, fishing, line, lawn, mower

How to choose a fishing line?

For each power trimmer for grass developers accurately calculate the cross section of kapron thread and the number of blades for the appropriate knife. Otherwise, the motor of the power tool will be very overloaded, which will lead to its failure. Overpaying for consumables out of ignorance for you will be ensured. That’s why you should be very careful when choosing lines for your grass trimmer to minimize costs.

See also  How To Turn On A Gasoline Lawn Mower

At the beginning you need to buy a suitable fishing line. It’s available in coils up to 100 20 meters long. The core’s cross section will be in your grass trimmer’s detail booklet.

This is what you need to pay attention to when choosing a line and working with it on the trimmer:

  • The wire with a 2 mm core cross section is used most often for cutting grass with a trimmer. For mowing soft and young grass, a narrow cord with a cross section of 1.51.8 mm is sufficient. On larger lawnmowers, on the other hand, a thicker line must be wound.
  • Do not forget to pay attention to the core structure. A round cord, for example, is considered the strongest and does a good job even with the coarsest weeds. But a curly pole is best suited for young or spiral grass. A strand with notches all along its length can only work with thin stems.
  • The minimum length for one threading of kapron thread in the mower reel is 2-4 meters, depending on its diameter and the recommendations of the manufacturer. For example, if you wind too much fishing line on the bobbin, then its movement will be difficult, and in the process of mowing the grass, you will notice new ends of excess material.
  • It is desirable to buy a fishing line only proven companies, which are listed in the recommendations of your electric device for mowing the grass. It should be made of quality material and have good strength to “cut” the lawn well and not wear out very quickly.

In order to increase the elasticity and strength of the cord, put the purchased thread in water for thirty minutes. By doing this, you will have difficulty tearing even the thinnest strand.

How to properly wind the line on the grass trimmer spool?

Despite the fact that garden equipment has been used for quite some time, for some private homeowners it is still a novelty. That’s why questions often arise about how to properly wind the fishing line on an electric or gasoline grass trimmer.

This is essentially a simple operation, but all of its steps must be performed competently to achieve the desired result. over, only few manufacturers’ manuals give an answer to this painful question. Explore the article and find out how to wind the fishing line on the grass trimmer spool.

The order of winding the fishing line on the grass trimmer reel

First of all, you should know that grass trimmers have different working attachments. The reel can be designed for different lengths and thicknesses of fishing line. this point should be taken into account when purchasing consumables.

See also  Lawn mowed Patriot gasoline what gasoline. Why do you need engine oil in the lawn mower

So, how do you load the fishing line into the grass trimmer reel? The whole work is divided into several steps:

  • First you need to disassemble the grass trimmer head.
  • Unscrew the nozzle by turning the reel to the right.
  • Press with your fingers on the two latches, located on opposite sides of the flytips, and remove the top cover of the nozzle. You can pick up the cover with a screwdriver. Be careful when doing this: automatic line feed reels have a spring that could eject the cap and the whole thing from the reel with force.
  • Take out the old fishing line pieces.
  • Now you need to find the middle of the line. To do this, coil it to the required length (e.g. 10 m), cut it off and fold it in half.
  • Hook the middle of the line in the notch provided or insert it in the hole provided. And start winding. The direction is indicated by the arrow on the grass trimmer reel body (usually against the rotation of the reel). Some models have a double-sided spool: in this case the line should be wound in different directions, one end in one direction and the other in the other, leaving a loop of line in the centre of the split.
  • Leave loose line ends about 20cm each. Later, you need to fix them in the recesses.
  • Finally, the last step is to assemble the reel. Reinstall the washers and spring. There are two notches on the top ring of the spool, where you must tuck the fishing line tendrils. Put them through the holes and place the reel in the reel, trying to pull the line up without dislodging the spring.
  • Place the reel cover on top and close it with your fingers. The catches will click into place.

When you start the weed trimmer, the surplus line will cut off by itself with the trimmer blade.

As you can see, winding the fishing line on the grass trimmer reel is not difficult: the main thing is to do it right. And here are a few more tips that will be helpful when choosing a fishing line, winding it up and working afterwards:

How to Spool a Spinning Reel | TIPS to Help Beginners!