How to wind a fishing line onto a Patriot grass trimmer reel

The line. a variety and the possibility of replacing it with other material

Grass trimmer cords are available in various diameters (from 1.2 to 4 mm) and should be selected depending on what kind of vegetation you want to mow. the thicker the line, the more coarse the grass it can handle. Experienced users recommend a 2 mm line, which is universal.

The shape of the line can be round (for succulent grass) or with sharp square or star-shaped edges (for mowing dry grass). The second type is less durable and wears out faster compared to the round cord.

One of the popular questions about the operation of trimmers is whether the special mower cord can be replaced with other materials, such as metal or steel cables and strings, wire, etc.д. It is necessary to know that the installation of such items is not recommended, because together with them, the grass trimmer turns into a dangerous technique. During mowing, pieces of wire or metal will constantly break off and fly in different directions, risking injury to the worker. And if you accidentally touch your limbs with it while working, a serious injury is assured.

Owners of trimmers, wondering whether you can use fishing line, we answer. it is allowed, but it will tear and wear out much faster, and therefore require frequent replacement.

Tip! Fishing line is well suited for cleaning grass near the fence or metal mesh. instead of spending expensive trimmer cord, you can charge a large-caliber tackle (2-3 mm), which is much cheaper.

Preparing to change

To make it clear, the mowing head (bobbin) was removed from the brushcutter. To change the line it is not necessary to remove it, everything is done on the spot. It does not take much time.

Dismantle the grass trimmer bobbin, which is held in place by a latch. Remove the cover by pushing on the latches. If your hands are not enough effort to do it, then use a screwdriver.

The bobbin is made up of the following:

The principle is as follows. Pressing the button, the spool is pressed on the spring and comes out of the fixing grooves in the cover of the bobbin. When held in this condition, the spool can be spooled to adjust the length of the line. When you release the button, the body spring returns the spool to its original locked position.

On the bottom of the spool there are several holes for different line diameters. They may vary from trimmer manufacturer to trimmer manufacturer. In some cases (as here) they are marked, in others they are not.

These holes are provided to hold the line in place when changing it. After winding the line on the reel, the ends of the latter are inserted into them. This is to ensure that the scaffolding does not unwind at the moment of installation of the reel into the body of the grass trimmer. In other words, it makes it easier to change the line.

There are some models that do not show the diameter of the line. in order to find out what is the maximum diameter of the line to use, it can be measured at the holes in the line lead out of the grass trimmer bobbin case (see Catalogue 336). picture below).

The spool has two sections for the line, separated by a divider. They may not be there. They are only needed to distinguish and facilitate the winding of the consumable.

First determine the length of line needed. The latter is wound into one of the sections of the spool so that it does not go beyond its limits. In this case the line was wound 3 mm, so it was about 2 meters long. Т.е. for the two sections you need a 4 metre section. that’s for the 1st method. For the second method, you need two pieces of 2 meters.

Now you need to figure out which side you need to wind it up. Many trimmer manufacturers put special markings on reels for this purpose, such as the one below.

If no such markings were found, you should pay attention to the bobbin case. There is obligatory an arrow that indicates the movement of the mowing head. The fishing line is wound to the opposite side.

The first way

Prepared piece (in this case it is 4 meters) is bent approximately in half. one piece should be 15-20 cm longer, and inserted into the special slit located on the divider.

The line is coiled in the previously determined direction. This is done under tension, the line is accurately distributed. The longer part should be wound into the section closest to the button.

Some models do not have a spool divided into two sections. It does not change anything, the line is wound in a similar way. The only thing to do is to make sure that the sections do not overlap.

The section at the bottom of the spool should end first, i.e.е. the one closer to the fixing holes.

This tip is placed in the appropriate diameter hole. The fishing line is securely fastened.

The longest piece should be wound a half turn further. There it is similarly fixed. In doing so, the wire crosses over another section of the reel.

Reel in another half-turn of line

The secured ends of the wound line are inserted into the holes of the grass trimmer bobbin case.

The secured ends of the wound line are inserted into the holes of the grass trimmer bobbin case

The reel is attached to the body. The ends of the fishing line are tightened with effort so that the line, previously fixed in the holes of the reel, pops out of there. This can be easily detected by the characteristic sound (click).

A reel with a button is snapped into the grass trimmer bobbin case.

Snap the reel with the button into the grass trimmer’s bobbin case

The line change was successful. At this point it is necessary to install back on the grass trimmer and you can start mowing the grass.

Once again, it is not necessary to remove the bobbin from the grass trimmer, it was done for clarity of line replacement. You can disassemble the bobbin on the spot, wind it on the spool and put it back.

The tips can and should be trimmed so that they do not hit the grass trimmer casing.

Method 2. two sections

does not differ in principle from the method The only difference is two reeled off pieces of line, instead of one.

There are two special fixing sockets on the reel (see picture above).

A hook, formed earlier on a fishing line, is hooked to it and starts to reel a fishing line.

The winding is carried out in a special order

Reel must be wound in the following order: first the lower line, t.е. the one closest to the fixing holes on the bottom of the spool, and only then the upper one, i.e.е. the one that will overlap the lower section.

The ends are slotted into the holes of the grass trimmer bobbin case. They are pulled up until a click, which indicates that the line is out of the clamps.

The tips are threaded into the holes of the grass trimmer‘s bobbin case

Clasp the reel in the housing. The line in the bobbin is replaced.

How to wind the line on the mowing head trimmer for grass or brushcutter

How to change filament in your trimmer: 2 easy ways

Feedback from our readers is very important to us. Leave your rating in the Комментарии и мнения владельцев with your arguments. Your opinion will be useful to other users.

What kinds of lines are available?

A commonly used type of line that fits on virtually all cord reel types. This ordinary line is suitable for cutting succulent grass, but it is much harder to cut dry grass, and it is less suited to cutting bushes.

Usually, the cross section that can be used to mow young grass does not exceed 1.6 mm. The thicker the line, the coarser the grass it can overcome.

There is a line with a sharpened facet in the form of a star or square, this version is more adapted to mowing dry grass just by having a sharp edge, but the disadvantage is its greater wear and tear, and on the strength it concedes round cord.

There are lines with improved aerodynamics with appropriate dents, scales and notches, a similar product makes less noise, but use it only on benzokosa, since the output of such thread from the spool is difficult, use it in most cases with discs, which are inserted segments. The disadvantage of such a product is its fragility.

Changing the line on a brushcutter

How to wind the cutting cord on the spool of a brushcutter (grass trimmer) yourself

Handmade gasoline lawnmower. Changing the line in the spool

In this video I show you how easy it is to wind the line on the spool of your hand held brushcutter without any help.

In most cases, in gasoline trimmers with engine power over 1.5 liters.с. use a cord with an iron cord inside. Such cord is perfectly suitable for mowing dry grass and small bushes. The presence of the core, has a positive effect on the durability of this material. The disadvantage of such cord is its price, which is significantly higher than the above listed opponents.

Features of trimmer application

Grass trimmer mowing with a fishing line can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, row spacing on the garden plot.

Such a convenient, and most importantly, effective device as a grass trimmer, there are several variations:

As is clear from the names, the types of grass trimmers are noticeably different from each other. But regardless of the type of this tool, its cutting element may be a fishing line. Of course, the line set in the reel of a grass trimmer is not endless. And sooner or later it will need to be replaced with a new.

Consumption of fishing line directly depends on the frequency of use of the device and the scale of the work performed. The more grass is mowed and the more often it is trimmed with the grass trimmer, the more line is used. And, accordingly, the faster it will run out. This begs the question: how to tuck the fishing line into the grass trimmer reel?

Not everyone knows the answer to this question. But the winding of the line on the spool plays an important role in the work of the grass trimmer. For the device to function properly, it is very important to properly wind the new line on the spool. On how to change the line on the trimmer, and will be discussed in this article.

How to rewind the line on the grass trimmer spool detailed instructions

The grass trimmer’s cutting filament has worn out and needs to be rewound? Don’t panic. There are several ways to wind the fishing line on the grass trimmer reel. The choice of method depends on the design of the bobbin and the model of the tool. Let’s get into the details of the process.

Grass trimmer can have several attachments for working with different types of vegetation

How to change the line on a gasoline trimmer: types of spools, replacement instructions, video

Grass trimmers are equipped with different types of reels, which are also called trimmer heads.

over, the design and operation of these devices, designed for brushcutters and electric scythes, are the same and it was invented back in 1971.

However, on each of these heads you have to change the line (string), which rubs off during work on the grass and the ground or breaks for various reasons.

• what types of spools there are and how they differ from each other;
• how to properly wind the string on each type of spool and change this element on the gasoline mower;
• what mistakes are made when winding the line;
• Why the line cannot be inserted or wound.

Problems and Solutions

Users of gasoline and electric trimmers sometimes have problems with the fishing line. Let’s look at the most common.

The line is often torn:

• maybe there are large rocks or branches in the place where you mow the grass;
• Be careful when working near mesh fences, as line tendrils break easily when in contact with such fences;
• Frequent breaks may be due to the poor quality of the line used, in this case try to buy a line from another manufacturer;
• if the holes in the mowing head are worn, the line will rub against the edges of the sleeves; in this case the part must be replaced with a new one.

• The fishing line is not wound correctly, as a result of which the spool stops spinning;
• Twisted winding causes the line to get caught between the coils;
• If the cord ends are left too short, there is not enough centrifugal force to feed it properly (retighten the cord ends before each use);
• Cord clumping.

How to SETUP a Fly Fishing Reel! Step-by-Step Tutorial. 2019

What kind of problems with the line and reel of your grass trimmer do you encounter when using it?

What grass trimmers are and how to use them

Grass trimmers are good for cutting small or difficult areas, e.g., around hedges, between seedbeds and along paths. Today, manufacturers produce a large variety of gasoline, electric and battery-powered models, which can be selected for any requirements of owners.

A filament is used as the cutting element of the grass trimmer. As you work, sooner or later it will run out of length, and then the owner will be faced with the question of how to properly replace and secure the thread in the detachable spool.

How to wind the line

Unhurriedly completed disassembling of the bobbin-spool without losing its parts allows to pass to the main task. reeling in the line. Technological features of the bobbin design and the number of working tendrils determine the sequence of actions.

Reel with one take-up pin

The simplest option and uncomplicated sequence of actions:

• Size of the bobbin and length of the original factory winding determine the recommended length of line for winding. 25 m.
• One end of the line is inserted into the fixing technological hole located inside the bobbin.
• The line is wound backwards on the reel to the spinning direction of the spool on the trimmer. usually an arrow on the inside of the reel shows in which direction the line is wound.
• A small section of fishing line is left free to lead it out. it is fixed in a specialized groove on the inside of the bobbin, designed to hold the winding when assembling the bobbin in working condition.
• The leftover end of the line is fed through the hole in the outer part of the spool.
• The halves of the reel are assembled and placed on the trimmer bar.

Reel with two working tendrils

In this type of bobbins should determine the number of grooves for winding the line lying on the inside of the spool:

For both cases, a 2 to 3 meter length of fishing line is used. In single spools, the line is pulled through the through hole, its ends (tendrils) are folded together and aligned, and then winded in the opposite direction of rotation of the bobbin on the rod. inside the arrow usually indicates the correct winding direction. If there are fixing grooves, the ends of the line are pushed through or held with fingers of free hand, put through the through hole of the outer half of the bobbin, bobbin is closed and attached to the trimmer’s boom.

The difference between winding the line in a dual reel is that initially a 2-5 m length of line is folded in half (to determine the middle fold), and the loop of the fold is inserted in a special groove between the grooves. Both fishing line tendrils are wound each along its groove, fixing the tendrils and reel assembly is similar to the above variant with one groove.

Doing this procedure for the first time may seem lengthy and quite time-consuming, but with time and experience this task will be much faster and easier.

The video below will clearly show how to tuck the line into the grass trimmer reel and properly wind it. this operation is not anything complicated and with some patience is sure to succeed:

After the cutting line wears out as a result of the operation, turn off the mower and remove the cover on the mowing head. Pull the fishing line out of the slot, pulling it to the desired length, and reinsert it into the slots. The amount of material wound on the spool is enough for 5-10 cycles of work, depending on the model of the device. When you will install the cover in place, look carefully to see if the grooves where the clips are inserted are not clogged, if they are, then carefully clean them.

When the line is worn out, you must again disassemble the mowing head, pull out the spool and rewind the working line on it.

Grass trimmer is the most common machine used to cut grass and cut small bushes. This machine is notable for its ease of maintenance, uncomplicated operation during work, and thanks to its low weight even women can cope with it. It is no secret that for the quality performance of works on grass mowing, the correct selection of cutting tools is required. As the latter, trimmers use special cutting nozzles (discs, knives) or trimmer heads with fishing line inside. Nozzles and fishing line are consumable tools, but if knives can be sharpened, when the line is used up it needs to be replaced. In this article, we will tell you in as much detail as possible how to properly replace the fishing line.