How to Wind a Husqvarna Trimmer Coil

How to wind the line on trimmer coil, if you haven’t done it before. Learn from the article how to win line to trimmer coil

Many, having developed a factory fishing line on a trimmer not so long ago obtained, try to rewind the latest, but they cannot, because they do not know how to wind the line onto the reel spool (bobbin) correctly. As if the annotation is, but still does not work. Let’s try to deal with this issue in this article.

So that win line, it is necessary, for starters, to remove the coil from the trimmer so it will be more convenient. Cord for trimmer rating. The removal method will depend on the type of trimmer.

Remove the coil from the trimmer

On small electronic trimmers with the bottom position of the motor (when it is when working near the ground), the coil usually has two buttons at the edges. Click on them and disconnect one half of the coil body from the 2nd, which remains on the trimmer. Together with the first half, the inner part, on which the fishing line is wound specifically, is removed. Trimmer carburetor needle adjustment. When disassembling, be careful: inside there is a spring that can fly out and get lost.

On electronic and petrol trimmers with a straight rod and a reducer at its end (you can also install a knife on the trimmers besides the fishing line), we look for a hole under the coil, insert a screwdriver in it, for example, rotate the coil quietly until the screwdriver penetrates even deeper and the coil will lock.

How to wind a line onto a mowing head of a trimmer or lawn mowing machine

The video carefully shows how to reel fishing line on the reel trimmers or lawn mowers. Dismantling the Husqvarna trimmer motor. Refueling with mowing line.

manual lawn mower. Replacing fishing line in the reel.

In this video, I show how simple and easy to reel. fishing line on the reel manual lawn mowers without the help of others.

than 200 types of trimmers in one place at the lowest prices. Click and watch

Now, having removed and disassembled the coil, we proceed, in fact, to winding.

Winding process

If your coil is designed to work with only one antennae, then everything is very simple. It is necessary to rewind 2-4 m of fishing line (depending on the size of the reel), find the hole fixing the fishing line on the inside of the reel, stick one end of the line there and begin to reel the line in the direction opposite to the direction of rotation of the reel on the trimmer. On the inside of the reel, they usually indicate an arrow, in which direction to wind the line. After winding up the fishing line, we leave its small piece unmotivated to expose it. Interskol trimmer motor device. We fix this piece in a special groove located on the inside of the reel and created so that the fishing line does not unwind at the time of collection of the reel. If there is no such groove, then you will have to hold the fishing line with your finger to prevent it from unwinding during the upcoming collection of the reel. Next, take the outer part of the reel and thread the outer piece of fishing line into the existing hole, collect and put the reel back on the trimmer.

If coil created to work with 2 antennae, then do the following.

If there are 2 grooves, we fold the piece of fishing line 2-4 m long in half, insert the loop obtained at the bend point into the groove between the 2 grooves, and immediately wind both ends of the fishing line each in its own groove. Refueling fishing line into the reel of the trimmer video. Subsequent acts are similar to the previous version.

There are still reels in which the line is threaded through the through hole on the inside, the ends of the line, without winding, are completely passed through the holes on the outer casing of the reel, the reel is assembled and the button is pressed, which is usually pressed to release the line through the extent of its wear.

That’s all for the matter. Good winding!

How does the trimmer work?

The principle of operation of such a device is that the grass is mowed by a special fishing line mounted on a rapidly rotating head. The number of revolutions per minute can reach 8000. For a short time, the fishing line becomes unusable, or rather, it is erased. Then the summer residents the question arises: "How to fill the fishing line into the trimmer coil"?

Types of woods for trimmer

First of all, in order not to resort to frequent replacements, it is better to use a denser fishing line. The number of its types and manufacturers is simply amazing. The main parameter of the fishing line for the trimmer is its diameter. It varies from 1.6 to 3.2 mm. The most common type is a 2 mm fishing line. However, it must be selected depending on the type of trimmer you have.

There are several options for the cross-section of the line. So, it can be round, square, in the form of an asterisk with sharp edges. The most effective is the last option. However, it should be used only on powerful braids and you need to know how to fill the fishing line into the trimmer coil. Therefore, we can conclude that the more powerful your lawn mower, the fishing line should be thicker.

Such a process as winding fishing line on a trimmer is not complicated, but has its own characteristics. First you need to choose the right fishing line, the diameter of which is registered in the passport of the device.

To begin, unscrew the cover of the coil. Be careful, as the thread can be left and right. The left-hand thread is necessary so that the braid head does not unwind during operation.

Refueling the fishing line with a trimmer

Before filling the fishing line into the trimmer coil, measure 5 m from the skein (as many fishing lines are installed on the trimmers on average). Then fold it exactly in half to find the middle. The resulting center must be inserted into a special slot, which is located on the coil. After that, wind the fishing line in the direction of the arrow that is on the head.

There are such models in which the place of winding is divided into two halves. Therefore, one is often wound clockwise, and the second against. After winding the fishing line completely, its ends are threaded into special holes. The cap is put on top of the head.

From the above it follows that the process of replacing the fishing line itself is not complicated. Having performed such a manipulation as winding fishing line on a trimmer reel several times, you will bring this process to automaticity. The only thing is to constantly monitor the condition of the fishing line, in order to avoid its rupture at the time of work on the site, when the spare skein may not be at hand.

Now you know how to fill the fishing line into the coil of the trimmer, and you can do it yourself without much effort!

Types of Trimmer Heads

The grass mowing head is a cylindrical body in which a reel (bobbin) with a fishing line (cord) tucked into it is inserted. This design can be installed on both gasoline and electric trimmers. The heads differ in the method of filling and feeding the cord and there are 3 types.

    Automatic. Cord feed is performed after the user reduces engine speed. Although automatic feeding of fishing line is convenient if large volumes of work are performed, such bobbins have one drawback. high thread consumption.

Based on the above, semi-automatic bobbins are the best option. It should also be borne in mind that the coils for the trimmer are single-string (used only for trimming grass) and double-string, which are used to mow tall grass and small, with thin stems of shrubs.

How to remove and disassemble the coil

Before starting the process of replacing the cord, users of trimmers need to remove and disassemble the coil. Consider how to do this.

The mowing head of the trimmer consists of several parts: casing, springs (not on all models), bobbins with cord and covers.

Attention! Before proceeding with any maintenance of the electrical unit, it must be disconnected from the mains.

In trimmers, 2 options for attaching the mowing head are most often used.

Option number 1

To remove the trimmer head, you will need it complete disassembly.

Option number 2

In this embodiment, the head is screwed onto the gear shaft. To take it off, you need this lock the shaft. To do this, in such trimmers, for example, in Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.

So, to remove the bobbin, follow 2 simple steps.

  1. Insert a screwdriver into the hole and lock the shaft.
  2. Grasp the head housing and start twisting it clockwise. Turn in this direction for the reason that the thread cut on the shaft is left.

Fishing line winding algorithm

Depending on which trimmer model is used, the type, thickness and length of the fishing line are selected. The diameter of the cord can be from 1.2 to 4 mm. It is not difficult to guess that the thicker you fill the cord, the more rigid and thick grass it can cut.

In most cases, a universal fishing line with a diameter of 2 mm is used.

There are 3 ways to find out what diameter of fishing line can be used on your mower.

  1. View information about the thickness of the cord in the instructions for the device.
  2. Look at the bobbin itself. It can be marked with information about the possible diameters of the fishing line.
  3. Insert the fishing line into the outlet. If it easily passes into it, then a cord of this diameter can be used.

The line is wound on a reel located in the mowing head. Therefore, you must first open it (this was discussed above). There are 2 ways to wind the cord.

First way

In order to correctly determine how many meters of fishing line is needed for a particular reel, it is necessary to wind it on a bobbin so that the coil does not exceed the diameter of the sides. If the fishing line peeks over the edges of the reel, you cannot insert it into the casing. After you have decided on the length of the material, it must be loaded into the bobbin, so do the following.

  1. Necessary fold the fishing line in half, so that one end of it is 10-15 cm longer from the other.
  2. Please note that the bobbin is divided into 2 parts by the central side, from which charging begins. Find a groove on it and insert a cord bent in half into it, with a little effort.
  3. It is very important to identify, in which direction is the fishing line wound to the reel. If you look closely, you can find an arrow on the bobbin or an inscription with an arrow indicating in which direction the winding should be carried out. There are times when there is no arrow on the reel. In such a situation, you can look at the arrow drawn on the mowing head and wind the cord in the opposite direction.
  4. Winding should be carried out carefully, coil to coil, with maximum thread tension.
  5. After the laying of the cord is completed, you will need to first fix the short end of the fishing line by inserting it into a suitable diameter groove on the side of the reel.
  6. The second end, the one that is authentic, is mounted in a groove on the opposite side of the bobbin.
  7. After fixing the fishing line, cut off its ends, leaving allowances of about 10 cm.
  8. Next, you need to install a seasoned coil in the mowing head. To do this, by inserting and pulling the thread into the outlet openings of the head, place the bobbin in the casing, and then, after applying the required force, pull the fishing line out of the fixing grooves and tighten it.
  9. Now you can put on the cover and fix it with latches.

Second way

In some coils, a second method of securing the cord is provided: 2 pieces of thread can be charged, instead of one folded in half. Replacing the fishing line occurs according to the following algorithm.

Video: How to Wind a Husqvarna Trimmer Coil


  1. Before changing or charging a new thread into a spool, determine how many meters it will be required in the manner described above.
  2. Bend one end of the cord in the form of a hook.
  3. Locate the hole at the bottom of the bobbin to secure the fishing line, and insert the end of the thread bent in the loop into it.
  4. It is required to wind the cord according to the direction of the arrow to the required level not exceeding the diameter of the coil.
  5. Do the same for the second bobbin slot.
  6. Assembling the head is no different from the method that was given when refueling the bobbin was considered with a doubled piece of fishing line.

For Shtil lawn mowers There is a very simple and quick way to replace the fishing line without disassembling the mowing head, which you can familiarize yourself with by watching this video.

The ends of the cord sticking out of the holes in the casing can be cut to the required length already when the part is installed in the trimmer. There are two ways to do this:

  • turning on the trimmer (during rotation, the ends of the fishing line are cut off on a knife fixed for this purpose on the protective cover);
  • by cutting off the excess ends with scissors so that they do not touch the housing body.

The second method is used if it was necessary to put a cord of large diameter, and a cutter cannot shorten it.

If the thread was charged into the mowing head, but the length of the protruding ends of the cord is insufficient, then they must be lengthened before starting the machine. this applies to the head with manual adjustment. However, there are cases when using a semi-automatic mowing head, when due to the insufficient length of the protruding ends of the cord, they do not automatically extend. In this case, it is necessary to turn off the unit (it is absolutely necessary to pull the plug out of the socket on the electric apparatus), manually press the button located at the bottom of the part, and pull out a little fishing line. After this procedure, the cord will again be able to extend due to centrifugal force, if you set the maximum spindle speed.

No matter what thickness you put the line, you should remember: in order not to interrupt the work and not change the cord, you should avoid areas where the working tool can touch hard surfaces (stones, curbs, thick dry branches, etc.).

What can be used instead of fishing line

Many users of trimmers are wondering: what can replace the default cord used in this kind of apparatus? They begin to conduct unsafe experiments by installing metal or copper wire, metal cables or strings, as well as ordinary fishing line in the mowing head.

If set instead of fishing line metal cable, then the trimmer turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during operation of the unit, the steel cable will gradually work, its ends will unravel, and small pieces of wire will fly apart in different directions at high speed.

A similar thing happens when using steel or copper wire, only with the difference that the pieces that come off will be larger and can cause serious injury.

How to Wind a Husqvarna Trimmer Coil

And if you accidentally hook your own or someone else’s foot while operating the machine with a steel cable (wire), then a strong and deep cut of the tissues, and in some cases amputation of your toes, is provided. It is not in vain that the manufacturer uses nylon for these purposes, since it is quite light and durable, and when detached it does not fly away and cannot cause injury.

Use fishing line in the trimmer instead of the standard one, of course, it is possible, but this will add you unnecessary trouble, because it wears out quickly, breaks, mows slowly and is not suitable for cutting hard grass. In addition, during the work, a lot of time is lost in order to replace a broken tool more than once.

In practice, the installation of an ordinary fishing line is justified if the user is going to mow the grass near the fence, especially if he is from a netting net. In this case, in order to protect the standard, and sometimes expensive cord from wear, it is changed to a fishing line, which is not AL-KO. Usually, in order to change the cord to the fishing line, it needs to be selected with the greatest thickness. 2-3 mm.

Replacing fishing line with a disc or knife

When refining a garden plot, park areas and other places where it is necessary to mow various kinds of plants, it is often necessary to change the cutting tool in the trimmer. This is dictated by the fact that the standard cord installed in the mowing head can only cope with herbs. But when a shrubbery or young shoot of trees appears on the way of the worker, the line cannot cope with such a task, and it needs to be replaced with a more effective cutting tool.

Manufacturers of trimmers provided such situations, and supplemented their products with a mass of nozzles in the form of knives with several “petals” or in the form of disks similar to circular saws.

If you replace the fishing line with a knife with several “petals”, then with such a tool you can mow both tall grass and plants with thick and dry stems. And changing the fishing line to disk, the user has the opportunity to lawn mowers to cut shrubs or small trees.

Knives and wheels are installed according to the following algorithm.

  1. The first step is to remove it by locking the shaft, the mowing head (turn clockwise) or the nut with the boot if the unit has not been used yet.
  2. Set the saw or cutting knife so that they are put on a small ledge (bushing).
  • Install the fastener cover on top of the knife and screw the nut onto the shaft (counterclockwise).
  • Tighten the nut (counterclockwise) using a pipe wrench.
  • For a better understanding of the tool change process, you can watch this video.

    Fishing line problems

    Users of trimmers, both gasoline and electric, sometimes have problems with the cord. “Advanced” owners of mowers can easily cope with the difficulties encountered, understanding why this is happening, and for beginners, this is a problem that does not have a rational explanation. But in fact, everything is solved quite simply. The most common problems that happen with fishing line are as follows.

    Cord breaks

    If the line is often torn, the following reasons can cause it:

    • stones, small branches and other solid obstacles come across in the grass;
    • the user mows the grass right next to the fence, and if it is mesh, it breaks the “antennae” even faster;
    • poor quality of the cord (it is recommended to purchase high-quality);
    • the outlet openings in the mowing head are worn out, due to which the fishing line is erased against the sharp edges of the bushings and breaks off (a complete replacement of the part is required).

    High cord consumption

    Basically, a cord ends quickly if often pounding the ground with a semi-automatic head or push it down hard. The reel is unlocked, and the fishing line, lengthening, is cut with a knife. Another reason that the cord ends quickly is the improper use of the machine with an automatic head: when mowing, the user often drops engine speed. But as we remember, the automatic head is designed so that it is with each decrease in speed that a new portion of fishing line is fed, so it is quickly consumed.

    The thread does not hold

    It happens that the thread is unwound if in a semi-automatic head the spring has loosened. The fishing line is constantly extended and trimmed with a knife mounted on the casing, which increases its consumption. To check this, remove the cover and turn on the unit. If the fishing line “climbed”, then you need to replace the spring.

    Fishing line crashes

    The reason that the cord unwinds after starting the unit can also be the weakening of the spring inside the head. In addition, there are times when the mowing head scatters when the unit is turned on, and the spring installed in it is lost. Inexperienced users do not notice the absence of a spring and assemble this unit without it. Therefore, the cord does not hold, and flies out under the influence of centrifugal force.

    The cord does not feed, the coil does not spin

    An automatic or semi-automatic head should feed the line without stopping the unit. But if it does not come out, then the reasons may be the following:

    • incorrectly wound fishing line in the reel, because of which the latter does not spin;
    • the cord is wound unevenly, and the thread can get stuck between turns (the thread should be wound carefully, turn to thread, without distortions);
    • too short ends of the thread come out of the holes, as a result of which there is not enough centrifugal force to extract them, and the fishing line is not supplied (it is recommended that the cord length is always adjusted before starting the unit, pulling it slightly);
    • the fishing line stuck together (to be discussed later).

    The thread sticks together

    This trouble is most often due to use of low-quality cord. When the machine is operating, the trimmer head heats up, and the poor-quality fishing line in it melts, sticking together. Also, sintering of threads occurs when a fishing line meets a solid obstacle. In this case, a sharp braking of the cord occurs, after which it is pulled into the head, where it is attached. Some owners of the units recommend lubricating the cord with mineral oil or spraying it with silicone spray after winding on a bobbin. Others advise winding less thread on a bobbin. But it is better to immediately buy a quality product, in the manufacture of which the manufacturer took into account the head overheating factor, and the thread will not stick together.

    Spinning reel models and winding types

    Any fishing rod or spinning rod has a reel. There are 3 varieties of fishing reels. For each of them a special type of winding fishing line is provided. Since the reels have a different design, we will analyze how the line is wound on each of the listed types.

    Inertialess coil

    The main element responsible for the winding of the line is the logger. This is a metal loop with a roller, which makes circular movements around the spool when working with the handle. During the first turn of the spool, the logger winds the line in one direction, for example, in the upward direction, and in the second turn of the line, the line has the opposite laying direction. As a result, the fishing line spool is located crosswise.

    Installing fishing line on an inertialess reel has several methods. Each type of coil has its own winding method.

    This is the so-called taper of the winding:

    1. Cylindrical winding.
    2. Straight cone. Toward the front side of the spool, the thickness of the stacked fishing line is reduced.
    3. Inverse cone. The thickness of the fishing line gradually increases in the direction of the front edge of the spool.
    4. Chaotic winding. Fishing line is wound arbitrarily. This method of winding is inherent in inexpensive Chinese products.

    “Straight cylindrical” winding is obtained by installing two shims

    Initially, new coils are configured for cylindrical styling. Then, as necessary, each angler adjusts the styling method "for themselves." Taper adjustment is carried out thanks to special washers located on the axis of the spool. So, if jerking baits are used for fishing, then reverse cone winding is used. In this case, the washer is replaced with a smaller one or removed altogether.

    Baitcasting Reel

    The line should be wound around the multiplier so that there is a gap of about 1-2 mm to the edges of the spool. Since backing of this type is not used in coils, it is necessary to accurately calculate the amount of fishing line for winding. That is, it should not be enough.

    You can fill the cord or fishing line in such a coil in the following order:

    • The end of the line is threaded through the logger.
    • The fishing line is attached to one of the holes of the movable spool. You can also fasten the fishing line with a loop by wrapping the fishing line around the spool axis several times.
    • The reel is attached to the rod.
    • The line is passed through the right ring.
    • The friction brake is tightened.
    • It remains only to quickly reel the line on the spool, and then put on a leash. In order for the turns to fit tightly, it is necessary to create some tension on the fishing line.

    How to create a special knot for tying fishing line on a spool

    Inertial coil

    The fishing line is laid most easily on an inertial-type reel. It is attached to the spinning reel by a simple knot-eight or a double loop. Next, the desired amount of fishing line is wound. In the process of winding, you need to make sure that the turns lie evenly. Provide tension to the fishing line. The easiest way to do this is with an ordinary book. A fishing line is passed between its pages, which press it, creating the necessary tension.

    How to wind a fishing line

    We will analyze step by step how to wind an existing fishing line onto a spool of a reel. First you need to ensure the free flow of fishing line from the reel. To do this, you can use a screwdriver, a piece of thick wire or a regular pencil. It would be better if you do this work with an assistant. He will hold the makeshift axis with the bobbin, and you will reel the fishing line on the reel. The winding pattern is as follows.

    You need to thread the line through the passage spinning rings. You need to start fishing line from the upper ring. Then the fishing line must be tied on the spool. You can fix the tip of the fishing line with a regular noose-loop, or wrap it with adhesive tape or electrical tape. Reliable fastening is especially characteristic of a braided cord, as it tends to “slip through” at the beginning of the winding. After that, you can wind the line on the spool, lowering the logger.

    In the process of winding, it is necessary to ensure that the line lies with a slight tension. This will prevent the formation of loops.

    At the final stage, all the gear should be adjusted. You need to attach a leash to the main fishing line that will be used for fishing. You can fix the leash to the main fishing line in different ways. Most often, anglers do this with a winding ring and carbine. The ring is fixed on the main fishing line, and the carabiner is attached to the leash. The bait leash can be replaced at any time.

    The process of winding fishing line on a reel

    What is backing?

    This term applies only to non-inertia reels due to the specific winding of fishing line on them.

    It often happens that the fishing line on the spool is not wound enough. For example, the spool is large, or the line is too thin. It seems that they used all 100 meters of fishing line, and 5 or more millimeters remain to the sides of the spool. In this case, the so-called backing is used, that is, the winding of the additional fishing line. Such a winding should be located at the very bottom of the spool. It performs only auxiliary functions, without taking part in the fishing process. But how to put it at the very bottom? To do this, remove the fishing line from the spool, and then install it on the other side.

    To replace, unscrew the clamping front nut and then remove the spool with fishing line from the reel. Instead, an empty spool is mounted on the reel. The line is rewound from one spool to another. Thus, the winding line is at the very bottom of the spool. If you do not have a spare spool, then use an empty reel from under the fishing line.

    Winding reels using backing

    How many fishing lines to reel

    How much fishing line do you need to recharge on a spool of reel? Experienced anglers always winding fishing line is not as long as it will be necessary for casting, but with a large margin. This is necessary to insure against possible cliffs. Also, if a braided cord is used, at the end of the season you can swap the sides of the cord by rewinding it to the other side. This will save costly consumables.

    Usually on each reel the quantity of fishing line of a certain thickness, which the spool can accommodate, is indicated. Usually, even a few values ​​are written. For example, "0.25 / 200 0.30 / 150 0.40 / 100".

    Tip: so that during the casting process the line does not self-reset from the spool of the inertialess coil, do not bring the winding to the very edges of the spool. It is recommended to leave a gap of 1 to 3 mm. A gap of more than 5 mm will create difficulties with casting range.

    Spinning line from the popular manufacturer Shimano

    If you want to wind a certain number of meters, you need to calculate how long the fishing line is 1 turn of the spool. After that, you can roughly calculate how many revolutions of the handle you need to do to wind a certain amount of fishing line or cord. But keep in mind that the number of revolutions of the reel handle never matches the number of turns of fishing line on the spool. For example, in most inertialess reels, the line will make 5 turns with one turn of the handle.

    Instead of a conclusion

    We figured out the issue of winding fishing line or braided cord on a spinning reel. Guided by this information, you can easily put the right amount of fishing line on the spool. If necessary, you can use backing if the fishing line on the spool is not enough. If everything is done correctly, then you can only rejoice at distant and accurate casts.