How to Wind a Wire on a Trimmer
I want to devote today’s article to the sore topic of summer residents and gardeners of the entire post-Soviet space "How to refill a fishing line into a trimmer." Not many trimmer manufacturers answer this question in their operating instructions. Therefore, it is difficult for ordinary gardeners to figure out how to do this correctly.
I want to start with a brief description of the technical characteristics of the trimmers.
So, trimmers are electric and gasoline. The cutting element of the trimmers can be a fishing line and a knife. The fishing line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and four blade blades. Knives are also plastic and metal.
The feed system of the fishing line from the trimmer is manual, semi-automatic and automatic.
Development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the fishing line and the number of knife blades according to the power of the trimmers. Otherwise, the engine is overloaded, which as a result leads to its breakdown. And this is an additional and significant cost.
Today on the market are trimmers:
With one nozzle – only fishing line.
With two nozzles – fishing line and three-four-blade knife.
With one nozzle – only a three-four-blade knife.
Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacing the fishing line with a metal cable, or fishing line. But at the same time they do not think about the safety of their and their loved ones, because, as a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave it crippled for life. Using fishing line can and gives a better effect, I have never personally tried it than fishing line for trimmer, but this work has a number of disadvantages: when it comes into contact with solid objects, it loosens or can simply be pulled out of the reel without limit.
So what is called closer to the topic. I give an example of how to fill a fishing line into a trimmer (BOSCH Art 30 trimmer). Everything is very simple. We started.
After you have chosen the fishing line for refueling, you need to cut off the necessary amount of fishing line, because all the fishing line in the skein is not wound into a reel.
Cut off and start winding.
Remove the coil and the protective cover from the coil.
They took off. We fix one end of the fishing line into the gap and carefully and evenly wind the fishing line.
The amount of fishing line should be such that the protective cover of the reel closes and the line on the reel unwinds itself a little.
The second end of the fishing line is planted in the hole on the protective cover.
Next, take the coil and the protective cover of the coil. We sink the end of the fishing line from the reel into the metal hole on the protective cover of the reel. Tighten the fishing line a little.
We put it all on the trimmer. Turn the coil clockwise until it clicks.
Secured. Now connect the trimmer to the network. We put the trimmer in the starting position for the job. Turn on the trimmer. The excess length of the fishing line will be cut off on the cutting blade.
That’s all starting work.
You can watch the video
A little tip. Make sure that the fishing line does not come into contact with solid objects when cutting. With this contact, the fishing line will be cut. And since, in this trimmer, the fishing line is not fed automatically, then you have to stop the work each time, remove the reel and re-release the fishing line.
In my trimmer, in addition to the standard line for mowing the lawn, there is still provided a thick fishing line for mowing coarse weeds. It has the shape of a pigtail, i.E. Three fishing lines are tightly intertwined. Such a fishing line has its own reel.
Thick fishing line
It is stored at the top of the trimmer body.
Spare coil storage space
Installing such a fishing line into the reel is very simple – according to the internal circuit inside the reel. We insert the center of the fishing line with a metal mount at the top of the reel, and draw the ends of the fishing line along the grooves and bring it out.
Video: How to Wind a Wire on a Trimmer
Reinforced Fishing Line
Such a coil is attached to the trimmer as well as a reel with ordinary fishing line.
Many, having developed a factory line on a newly acquired trimmer, try to rewind a new one, but they cannot, because they do not know how to wind the line onto the reel spool (bobbin). It seems that there is an instruction, but it still doesn’t work out. Let’s try to deal with this issue in this article.
So, to rewind the fishing line, you need, for starters, to remove the reel from the trimmer – it will be more convenient. The removal method will depend on the type of trimmer.
Remove the coil from the trimmer
On small electric trimmers with the bottom position of the engine (when it is when working near the ground), the coil usually has two keys on its sides. We click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is taken out, on which the fishing line is directly wound. When parsing, be careful: there is a spring inside that can fly out and get lost.
On electric and petrol trimmers with a curved bar (it is still not possible to put a knife on such trimmers), you need to grab the coil body with one hand, and with the second hand you need to start turning the lamb on it. It is he who fastens the coil to the trimmer bar. Having unscrewed the lamb, carefully remove the entire coil, being careful not to lose the spring inside.
On electric and petrol trimmers with a straight rod and a gearbox at its end (in addition to fishing line, you can also install a knife on such trimmers) we look for a hole under the coil, insert a screwdriver into it, for example, rotate the coil quietly until the screwdriver penetrates even deeper, and the coil will lock. Now twist the entire coil clockwise (since the thread is left) and remove it from the trimmer. Then we disassemble the coil. It can be assembled using latches or twisted by a lamb. If the coil is on latches, then we press on the sides on the base of the latches so that they bend and release one half of the coil body from the other. We just twist the lamb. There may also be a third type of connection of two halves of such a coil: with it, you need to grab the lower part with one hand, and the upper one with the other, and start turning them in opposite directions. When disassembling such a coil, you must also make sure that the spring inside is not lost.
More than 200 types of trimmers in one place at the lowest prices. Click and see
Now, having removed and disassembled the coil, we proceed, in fact, to winding.
If your coil is designed to work with only one antennae, then everything is simple. You need to rewind 2-4 m of fishing line (depending on the size of the reel), find the hole fixing the line on the inside of the reel, insert one end of the line there and start reeling the line in the direction opposite to the direction of rotation of the reel on the trimmer. On the inside of the reel, they usually indicate an arrow, in which direction to wind the line. After winding up the fishing line, we leave a small piece of it unwound to expose it. We fix this piece in a special groove located on the inside of the reel and designed so that the fishing line does not unwind at the time of collection of the reel. If there is no such groove, then you will have to hold the fishing line with your finger to prevent it from unwinding during the further collection of the reel. Next, we take the outer part of the reel and thread the outer piece of fishing line into the existing hole, collect and put the reel back on the trimmer.
If the coil is designed to work with two antennae, then do the following. On the inside of the reel, we see how many grooves are available for winding fishing line. There may be one or two. If there is one groove, then both antennae are wound along this same groove. If there are two grooves, then each antennae is wound on its own groove. The reel with one groove should have a through hole into which the line is threaded. Unwind 2-4 m of fishing line, thread it through this hole so that on each side of the fishing line sticks out equally. And at the same time we wind both antennae of the fishing line in the same direction, opposite to the direction of rotation of the coil on the trimmer and coinciding with the direction indicated by the arrow on the inside of the coil. We leave a little fishing line unwound, we fix the ends in special grooves, and if they are not there, hold them with our fingers. Pass both ends into the holes on the outer coil body. We assemble the coil and attach it to the trimmer.
If there are two grooves, we fold the piece of fishing line 2-4 m long in half, insert the loop obtained at the bend point into the groove between the two grooves, and simultaneously wind both ends of the fishing line in each groove. Further actions are similar to the previous option.
There are still reels in which the line is threaded through a through hole on the inside. After that, the ends of the fishing line, without winding, are threaded completely through the holes on the outer casing of the reel, the reel is assembled and the button, which is usually pressed, is rotated so that the line can be released during operation as it wears out. Turn the button – the line itself is wound inside. At the same time, turning it in the “wrong” direction will not work, since it can only spin in one direction. If you get used to it, then you can wind the line onto such a reel without even taking it apart – you just need to combine the through hole of the inner drum with the holes on the outer case of the reel, and then thread the line into them.
That’s all for the matter. Good winding!