How To Wind The Line On The Patriot Trimmer

Thick line

It is stored at the top of the trimmer body.

Spare coil storage space

It is very simple to install such a fishing line into the reel. according to the internal scheme inside the reel. We insert the center of the line with a metal mount in the upper part of the reel, and draw the ends of the line along the grooves and lead out.

In addition to the standard lawn line, my trimmer has a thick line for cutting rough weeds. It is shaped like a pigtail, i.e. Three lines are tightly intertwined. This line has its own spool.

Trimming the line into the trimmer.

I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space “How to fill the line in the trimmer.” Many trimmer manufacturers do NOT answer this question in their instruction manuals. Therefore, it is also difficult for simple gardeners to figure out how to do it correctly.

I want to start with a brief description of the technical characteristics of the trimmers.

So, trimmers are electric and gasoline. The cutting element in trimmers can be a fishing line and a knife. The line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and 4 bladed knives. Knives also come in plastic and metal.

The line feed system from the trimmer is manual, semi-automatic and automatic.

The development engineers who create new models of trimmers accurately calculate the diameter (thickness) of the line and the number of knife blades, according to the power of the trimmers. Otherwise, the motor is overloaded, resulting in damage. And these are additional and significant costs.

Trimmers on the market today:

With one nozzle. only a line.
With two nozzles. a fishing line and a three-four-blade knife.
With one attachment. only three to four blades.

Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they DO NOT think about the safety of their own and their loved ones, because the cable with the power of the working trimmer can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.

So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30). Everything is very simple. Started.

After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in skeins will NOT be wound into a reel.

Cut off and start reeling.

Removing the coil and protective cover from the coil.

They took it off. Fastening one end of the line into the gap and carefully and evenly wind the line.

The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little.

We put the other end of the line into the hole on the protective casing.

Next, take the coil and the coil cover. We squirt the end of the line from the reel into the metal hole on the protective cover of the reel. We tighten the line a little.

We put it all on the trimmer. Turn the coil clockwise until it clicks.

I fixed it. Now connect the trimmer to the mains. We put the trimmer in the starting position for work. We turn on the trimmer. Excess line length will be cut into the trimming blade.

Spool in trimmers

That’s all we start working.

Material you can see

A little advice. Try to keep the line out of contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then you have to stop work every time, remove the spool and release the line again.

Heavy-duty line in a reel

This reel is attached to the trimmer in the same way as a reel with an ordinary line.

How to wind the line onto the Patriot trimmer reel?

Almost every beginner when using a trimmer is faced with the problem of changing the line. While changing your line is easy, you need to learn how to do it right. Changing the fishing line with the proper skill will not take more than five minutes. you just have to constantly practice it. This article will look at changing line using Patriot trimmers as an example.

Instructions

In order to change the line, you need to remove the old one (if it was).

The reel is the part of the trimmer structure that is located inside the mower head, drum or bobbin. Heads may vary depending on the manufacturer. But this article only covers Patriot, although their mechanism is used by many other companies.

Instructions on how to unscrew the manual head on the trimmer, described below.

  • First of all, you need to clean the head from dirt and adhering grass, if it is dirty. To do this, lift the mower head up and, grasping the casing, remove the special protective cover that is on the drum.
  • The next step is to remove the spool from the drum. The reel can be easily removed even with one hand, because it is NOT fixed in any way inside the drum.
  • The drum itself is bolted to the trim tabs. This bolt must be unscrewed, after which you can easily pull out the drum. To do this carefully, you should support the drum with the spool, while unscrewing the screw counterclockwise.
  • Now you can pull the coil out. As mentioned above, it is NOT secured by anything, except for a hook with a metal shaft, so it does not need to be pulled out with force. Carefully, in a circular motion, pull the spool out of the drum.
  • Now it remains to remove the old fishing line and follow the following instructions.

Installation of the spool and drum in their original place is performed according to the reverse algorithm.

Before threading the line, make sure you have purchased the correct thread for the trimmer. In the event that the string is not suitable, the fuel or energy consumption increases, as well as the load on the engine of the lawn mowers.

In order to replace the thread itself directly, you need to prepare a whine cut of the required size. Most often, this requires about 4 m of line. The specific figure will depend on the parameters of the whine, for example, its thickness, as well as on the parameters of the coil itself. If you cannot accurately determine the length, you can do the following: insert and wind the thread to such a state that the coil is fully charged (the level of the line will be compared with the protrusion in the sides of the coil). Necessary Make sure that the line is sitting flat in the reel.

The instructions for threading the line into the spool are described below.

  • The prepared thread must be taken and folded in half. It should be ensured that one edge is longer than the other by 0.1-0.15 m.
  • Now you need to take the ends in different hands. The one, which is smaller, needs to be pulled up to a larger one, so that it becomes 2 times shorter. When bending, you should maintain an offset of 0.15.
  • Find the notch inside the coil baffle. Gently thread the loop you made earlier into this slot.
  • To continue working, it is necessary to determine the direction of winding the thread in the bobbin. To do this, it is enough to inspect the coil. there should be an arrow on it.
  • If it was not possible to find a pointer arrow, then it is quite possible that there is a written designation. An example is shown in the photo below. Inspect the coil head. It has a direction indicator. However, this is the direction of movement of the coil. To get the winding direction, you need to wind in the opposite direction.
  • Now you need to load the spool with line. It is worth noting that there are special guide grooves inside the coil. When wrapping, whine, you must follow these grooves, otherwise you can damage the trimmer. At this stage, you need to charge the coil very carefully.
  • When the user has wound almost the entire thread, take the short end (do not forget about the 0.15 protrusion) and pull it into the hole located in the wall of the spool. Now you need to repeat this action in the same way with the other end (on the other side).
  • Put the reel itself in the head of the reel, before passing the line through the holes inside the drum.
  • Now is the time to put the drum back in place. After that, you need to take the ends of the line with both hands and pull them to the sides. Then you need to put the lid back on (here you can safely make an effort, until you hear a characteristic click).
  • It remains to do the “cosmetic work”. We need to see if the thread is too long. You can start the trimmer and check in practice if everything is comfortable. If the thread comes out a little long, you can cut it with scissors.
READ  How to Set a Circle on a Trimmer

Frequent mistakes

Although winding the line is a very simple task, many beginners can wind the line incorrectly. Below are the most common mistakes.

  • Many people, when measuring the thread, think that 4 m is a lot. Because of this, people often measure less, and, accordingly, they do not have enough line. DO NOT be afraid to measure a lot, because you can always cut off the excess.
  • In a rush, some people do not follow the threading grooves inside the spool and wind the thread randomly. This causes the line to come out of the reel and may even cripple.
  • For winding, use only the appropriate line. This error is the most common. You need to monitor not only the thickness and volume of the line, but also its type. You should NOT use the first line that comes across for wrapping, which will not meet the goals. For example, it is not necessary to use a thread on young grass if it is necessary to mow dead wood.
  • Do not turn on the device in full winding and collecting. Although this is obvious, some people do this in order to check if everything is done correctly.
  • In no case should you confuse the direction of refueling, as this will overload the engine, and it will soon come out of working condition.

It is quite common for beginners to make mistakes, so you need to follow the tips given in this article.

See below for how to replace line with Patriot trimmer.

How to change line to trimmer

Below we have provided Step-by-step instructions for replacing a whine trimmer.

The first thing to do is unplug the tool and turn off the engine. Then you need to remove the trimmer head. This can be done by using a simple screwdriver, lowered it into the hole of the gearbox to prevent the shaft from turning. And then just Unscrew

They are usually unscrewed in a clockwise direction, but different models have different mechanisms, so it may be necessary to twist in the opposite direction. But if suddenly, for some reason, you cannot figure it out, then we strongly recommend that you refer to the user manual to understand how to disconnect it

Second. After removing the mowing head, open it. This can be done by means of clamps, which are located opposite each other. Pressing on them, you can remove the head cover, and then pull out the spool on which the fishing line is wound. By pulling it out, you can determine what type it belongs to. There are bobbins one-piece and two-piece

We analyze how to thread the line into the trimmer spool in two versions

So, option one. load the fishing line into a single-section reel. The prepared piece of thread is folded in half and pushed into the spool. Then, we begin to wind both ends in the same direction, which will be indicated by the arrow on the spool. At the end of the winding, do not forget to check that the different ends of the thread are looking in different directions.

Option two. winding the line with a two-piece reel. The pre-prepared thread is divided into two parts, and its ends, must be fixed: this must be done by placing them in special fasteners

Winding is carried out, as in the first case, along the arrow indicated on the spool. Both segments must be wound so that they do NOT overlap. Further, the ends of the thread must be fixed in the grooves and spread on opposite sides.

The spring is then inserted into the reel and the whole thing is placed in the mowing head. When placing the coil in the trimmer you need to gently hold the spring parallel to insert the line into the cut of the mower head. And in the end, it just needs to be secured with the final part, that is, with a lid.

After threading the trimmer, you need to check it. If you did everything correctly, everything will work, but if you make a mistake, we recommend that you read the article again, or even better, if you look at how to install the line on the reel in the trimmers.

How to remove the line from the trimmer spool

Over time, the cutting element of the head wears out, and it becomes necessary to pull out the remnants of the old line. But not everyone knows how to do it. Our step-by-step instructions plus how to pull the thread from the trimmer spool, which you can find on the net, will help in solving this issue.

The mowing head must be disassembled

Remove the cover using the clips

Cleaning up the remnants of cutting material

Complicated? Of course not. But if, nevertheless, doubts creep into you that for some reason you will NOT be able to do this, then of course find and see how to pull out or how to wind the thread onto the spool of the lawn mowers.

How to wind the line onto the trimmer spool

05 July 2018

The trimmer is a great solution for those who have a large garden or lawn near the house, which needs to be constantly trimmed. But like any other tool, sometimes it requires intervention. After some time, it will become necessary to replace certain elements, and this will have to be learned.

How can this be done? To replace the main cutter, you must first select it correctly. In principle, the lawn mower instruction manual should indicate the diameter of the thread to be used in it.

When you have acquired the required cutting element, try to install it correctly. It should be noted that there are a huge number on the Internet. Which will help you figure out how to properly thread the line into the trimmer spool.

How to replace the line with an electric trimmer

In fact, it makes no difference which oblique you use, be it electric or gasoline. Threading is the same. The only difference is that if you use a gasoline scythe, you get more freedom, since it is NOT limited by the cable, which is present on the electric scythe

Yes, do not hesitate to use special rollers for installing or threading the line in an electric scythe, which can teach you much faster than simple reading.

How to wind the line onto the trimmer spool

05 July 2018

The trimmer is a great solution for those who have a large garden or lawn near the house, which needs to be constantly trimmed. But like any other tool, sometimes it requires intervention. After some time, it will become necessary to replace certain elements, and this will have to be learned.

How can this be done? To replace the main cutter, you must first select it correctly. In principle, the lawn mower instruction manual should indicate the diameter of the thread to be used in it.

When you have acquired the required cutting element, try to install it correctly. It should be noted that there are a huge number on the Internet. Which will help you figure out how to properly thread the line into the trimmer spool.

How to change line to trimmer

Below we have provided Step-by-step instructions for replacing a whine trimmer.

The first thing to do is unplug the tool and turn off the engine. Then you need to remove the trimmer head. This can be done by using a simple screwdriver, lowered it into the hole of the gearbox to prevent the shaft from turning. And then just Unscrew

They are usually unscrewed in a clockwise direction, but different models have different mechanisms, so it may be necessary to twist in the opposite direction. But if suddenly, for some reason, you cannot figure it out, then we strongly recommend that you refer to the user manual to understand how to disconnect it

Second. After removing the mowing head, open it. This can be done by means of clamps, which are located opposite each other. Pressing on them, you can remove the head cover, and then pull out the spool on which the fishing line is wound. By pulling it out, you can determine what type it belongs to. There are bobbins one-piece and two-piece

We analyze how to thread the line into the trimmer spool in two versions

So, option one. load the fishing line into a single-section reel. The prepared piece of thread is folded in half and pushed into the spool. Then, we begin to wind both ends in the same direction, which will be indicated by the arrow on the spool. At the end of the winding, do not forget to check that the different ends of the thread are looking in different directions.

Option two. winding the line with a two-piece reel. The pre-prepared thread is divided into two parts, and its ends, must be fixed: this must be done by placing them in special fasteners

Winding is carried out, as in the first case, along the arrow indicated on the spool. Both segments must be wound so that they do NOT overlap. Further, the ends of the thread must be fixed in the grooves and spread on opposite sides.

The spring is then inserted into the reel and the whole thing is placed in the mowing head. When placing the coil in the trimmer you need to gently hold the spring parallel to insert the line into the cut of the mower head. And in the end, it just needs to be secured with the final part, that is, with a lid.

After threading the trimmer, you need to check it. If you did everything correctly, everything will work, but if you make a mistake, we recommend that you read the article again, or even better, if you look at how to install the line on the reel in the trimmers.

How to remove the line from the trimmer spool

Over time, the cutting element of the head wears out, and it becomes necessary to pull out the remnants of the old line. But not everyone knows how to do it. Our step-by-step instructions plus how to pull the thread from the trimmer spool, which you can find on the net, will help in solving this issue.

The mowing head must be disassembled

Remove the cover using the clips

Cleaning up the remnants of cutting material

Complicated? Of course not. But if, nevertheless, doubts creep into you that for some reason you will NOT be able to do this, then of course find and see how to pull out or how to wind the thread onto the spool of the lawn mowers.

READ  How To Properly Wind The Line On The Huter Trimmer

How to replace the line with an electric trimmer

In fact, it makes no difference which oblique you use, be it electric or gasoline. Threading is the same. The only difference is that if you use a gasoline scythe, you get more freedom, since it is NOT limited by the cable, which is present on the electric scythe

Yes, do not hesitate to use special rollers for installing or threading the line in an electric scythe, which can teach you much faster than simple reading.

What can be used instead of fishing line

Many users of trimmers ask themselves the question: what can be used to replace the default cord used in this kind of machines? Begin unsafe experiments by installing metal or copper wires, metal ropes or strings, and ordinary fishing line in the mowing head.

If you install a metal cable instead of a fishing line, the trimmer turns into a dangerous device Not only for the user, but also for those around. This fact is explained by the fact that during the operation of the unit, the steel cable will gradually be triggered, its ends will unravel, and small pieces of wire will scatter in different directions at high speed.

And if you accidentally hook your or someone else’s leg while working with a steel cable (wire), then a strong and deep tissue incision, and in some cases amputation of your toes, is guaranteed. The manufacturer does NOT use nylon for THESE purposes in vain, since it is light and strong enough, and when it comes off it does not fly far away and cannot cause injury.

Of course, you can use fishing line in the trimmer instead of the standard one, but this will add extra trouble to you, since it wears out quickly, tears, mows slowly and is NOT suitable for cutting tough grass. In addition, when carrying out work, a lot of time is lost to replace the broken tool more than once.

In practice, the installation of a conventional line is justified if the user is going to mow the grass near the fence, especially if he is from the netting. In this case, in order to protect the standard, and sometimes expensive, line from wear and tear, it is changed to a fishing line, which is not a complaint. Usually, in order to change the line to the line, it must be selected The greatest thickness. 2-3 mm.

High cord consumption

Basically, the cord runs out quickly if you hit the ground frequently with the semi-automatic head or press it down hard. The spool is unlocked, and the line, lengthening, is cut with a knife. Another reason that the cord runs out quickly is improper operation of the machine with an automatic head: the user often cuts the engine speed when mowing. But as we remember, the automatic head is designed in such a way that it is with each decrease in revolutions that a new portion of the line is supplied, so it is quickly consumed.

Line winding algorithm

Depending on which trimmer model is used, the type, thickness and length of the line are selected. The diameter of the cord can be from 1.2 to 4 mm. It is not difficult to guess that the thicker you fill the cord, the harder and thicker grass it is able to cut.

There are 3 ways to find out which line diameter you can use on your mower.

  • View information on the thickness of the cord in the instructions for the device.
  • Look at the bobbin itself. It can contain information about the possible diameters of the line.
  • Insert the line into the outlet. If it easily passes into it, then a cord of this diameter can be used.

The line is wound on a reel in the mowing head. Therefore, you first need to open it (this was discussed above). There are 2 ways to wind the cord.

Line problems

Users of trimmers, both gasoline and electric, sometimes have problems with the cord. “Advanced” Owners of mowers easily cope with difficulties in automotive products, understanding why this happens, and for beginners, these are problems that have no rational explanation. But in fact, everything is solved quite simply. The most common problems that happen with the line are as follows.

The first way

To correctly determine how many meters of line is required for a particular reel, it is necessary to screw it onto the bobbin so that the skein does NOT exceed the diameter of the sides. If the line sticks out over the edges of the spool, you will NOT be able to insert it into the casing. After you have decided on the length of the material, it must be threaded into the bobbin, so do the following.

  • It is necessary to fold the fishing line in half, so that one end of it is 10-15 cm longer from the second.
  • Please note that the bobbin is divided into 2 parts by the central edge, from which charging begins. Find a groove on it and insert a cord into it, bent in half, put a little effort.
  • It is very important to determine in which direction the line is wound onto the reel. If you look closely, you can find an arrow on the bobbin or an inscription with an arrow indicating in which direction the winding should be carried out. There are times when there is no arrow on the coil. In such a situation, you can look at the arrow drawn on the mowing head and wind the cord in the opposite direction.
  • Winding should be done carefully, turn by turn, with maximum thread tension.
  • After the laying of the cord is completed, you will first need to fix the short end of the fishing line, insert it into a groove of a suitable diameter on the side of the reel.
  • The second end, the one that is longer, is attached in a groove on the opposite side of the bobbin.
  • After fixing the fishing line, cut off its ends, leaving about 10 cm allowances.
  • Next, you need to install the loaded bobbin into the mowing head. To do this, alternately insert and pull the thread into the outlet holes of the head, place the bobbin in the casing, then, applying the required force, Pull the fishing line out of the fixing grooves and tighten it.
  • Now you can put on the cover and fix it with the latches.

Second way

Some reels have a second method of securing the cord: you can charge 2 pieces of yarn instead of one folded in half. The line is replaced according to the following algorithm.

  • Before you change or load a new thread into the spool, determine how many meters it will take using the method described above.
  • One end of the cord Fold into a hook.
  • Find the hole at the bottom of the bobbin for fixing the line, and insert the end of the thread bent in a loop into it.
  • It is required to wind the cord according to the direction of the arrow to the required level, and not exceeding the coil diameter.
  • Do the same for the second bobbin compartment.
  • The assembly of the head does not differ in any way from the method that was given when it was considered threading the bobbin with a piece of line folded in half.

For Shtil lawn mowers, there is a very simple and quick way to change the line without disassembling the mowing head, which you can get acquainted with by looking at this.

The ends of the cord protruding from the holes in the casing can be cut to the desired length when the part is installed in the trimmer. This can be done in two ways:

  • Turned on the trimmer (when rotating, the ends of the line will be cut into a knife, fixed for THESE purposes on the protective casing)
  • Cutting off the excess ends with scissors so that they DO NOT touch the casing body.

The second method is used if a large diameter cord had to be supplied, and the edging knife cannot shorten it.

If a charge was made to whine into the mowing head, but the length of the protruding ends of the cord is insufficient, then they must be lengthened before starting the machine. this applies to the head with manual adjustment. However, there are cases when using a semi-automatic mowing head, when, due to the insufficient length of the protruding ends of the cord, they do NOT automatically lengthen. In this case, it is necessary to turn off the unit (on electrical apparatus, it is imperative to unplug the plug from the socket), manually press the button located at the bottom of the part, and pull out a little line. After this procedure, the cord can again be extended due to centrifugal force, if you set the maximum spindle speed.

How to remove and disassemble a coil

Before starting the process of changing the cord, it becomes necessary for trimmer users to remove and disassemble the coil. Let’s see how to do it.

The trimmer mowing head consists of several parts: a cover, a spring (not on all models), a spool with a cord and a cover.

In trimmers, 2 options for mounting the mowing head are most often used.

Option

To remove the trimmer head, you will need to completely disassemble it.

  • To remove the cover that covers the inside of the head, you must press on the latches (latches) located on both sides.
  • After removing the cover, you will see a spool that needs to be removed from the body. Some spools have a spring under the bobbin, which must be carefully pulled out to avoid losing it in the grass.
  • When you remove the bobbin, you will see a slotted screw for a Phillips or flathead screwdriver in the center of the case. It is possible that there may be a hex bolt or a nozzle “star”.
  • Using a screwdriver, selecting the required bit (bit), it is required to Unscrew the bolt (counterclockwise).
  • After removing the fasteners, grasp the body of the part and, swing it in different directions, Remove it from the gearbox shaft.

Types of trimmer heads

The grass mowing head is a cylindrical body in which a spool (bobbin) is inserted with a fishing line (cord) tucked in it. This design can be installed on both gasoline and electric trimmers. The heads differ in the way of threading and feeding the cord and are of 3 types.

  • Automatic. Cord feed is performed after the user Decreases engine RPM. Although the automatic line feed is convenient if large volumes of work are performed, there is one drawback in such bobbins. a high whine consumption.
  • Semi-automatic. The use of this type of heads does not require the user to perform complex manipulations. The principle of their operation is designed in such a way that the cord lengthens automatically while the apparatus is operating at full speed. It is enough to lightly hit the ground with the trimmer head (this removes the blocking of the cord), and the line is pulled out of the bobbin due to centrifugal force, after which it is cut to the required length with a knife located on the protective cover.
  • Manual. To lengthen the cord, the device must be stopped, after which the line is pulled manually.
READ  How to Swap a Coil for a Husqvarna Trimmer

Based on the above, semi-automatic bobbins are the most optimal option. It should also be borne in mind that the coils for the trimmer are single-string (used only for trimming the grass) and two-string, which are used for mowing tall grass and small, thin-stemmed bushes.

How to properly wind the line on the trimmer spool

Many, having worked out the factory line on the recently purchased trimmers, are trying to wind a new one, but they cannot, because they do not know how to properly wind the line on the spool (bobbin) of the trimmer. It seems that there is an instruction, but it still does not work. Let’s try in this article to deal with this issue.

So, in order to wind the line, you first need to remove the coil from the trimmer. this will be more convenient. The removal method will depend on the type of trimmer.

Removing the coil from the trimmer

On small electric trimmers with a bottom-mounted motor (when it is in the ground while working), the reels usually have two keys on the sides. Click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is also taken out, on which the fishing line is directly wound. When disassembling, be careful: there is a spring inside that can fly out and get lost.

On electric and gasoline trimmers with a curved bar (there is still no way to put a knife on such trimmers), you need to grab the coil body itself with one hand, and with the other hand you need to start rotating the lamb on it counterclockwise. It is he who attaches the coil to the Trimmer Bar. Having unscrewed the lamb, carefully remove the entire coil, trying NOT to lose the spring inside.

On electric and gasoline trimmers with a straight bar and a gearbox at its end (on such trimmers, in addition to fishing line, you can also install a knife), we look for a hole under the coil, insert, for example, a screwdriver into it, quietly rotate the coil until the screwdriver does NOT crawl even deeper and the coil will lock. Now steep the whole coil clockwise (since the thread is left-hand) and remove it from the trimmer. Then we disassemble the coil. It can be assembled using snaps or a twisted lamb. If the coil is on latches, then press on the sides on the base of the latches so that they bend and release one half of the coil body from the other. We just unscrew the lamb. There may also be a third type of connection between the two halves of such a coil: with it, you need to grab the lower part with one hand, and the upper part with the other, and start turning them in opposite directions. When disassembling such a coil, you also need to make sure that the spring inside is not lost.

than 200 types of trimmers in one place at the lowest prices. Click and watch

Now, having removed and disassembled the coil, we proceed, in fact, to winding.

Winding process

If your coil is designed to work with only one tendril, then it’s simple. You need to unwind 2-4 m of fishing line (depending on the size of the reel), find a hole on the inside of the reel for the fixing line, insert one end of the line there and start winding the line in the direction opposite to the direction of rotation of the reel on the trimmer. On the inside of the reel, they usually indicate with an arrow in which direction to wind the line. I wound the fishing line, we leave a small piece of it unwound to put it out. We fix this piece in a specially groove located on the inner part of the reel and designed so that at the time of collecting the reel, the line does NOT unwind. If there is such a groove, then you will have to hold the fishing line with your finger to prevent it from unwinding during the further collection of the coil. Next, we take the outer part of the coil and threading the outer piece of fishing line into the existing hole, collect and put the coil back on the trimmer.

How To Wind The Line On The Patriot Trimmer

If the coil is designed to work with two tendrils, then do the following. On the inside of the reel, we look at how many grooves there are for winding the fishing line. There may be one or two of them. If there is only one groove, then both tendrils are wound along this one groove. If there are two grooves, then each antenna is wound along its own groove. Reels with one groove should have a through hole through which the fishing line is threaded. We rewind 2-4 m of fishing line, threading it through this hole so that the fishing line sticks out equally on each side. And we simultaneously wind both tendrils of the fishing line in one direction, opposite to the direction of rotation of the coil to the trim tabs and coinciding with the direction indicated by the arrow on the inside of the coil. We leave a little of the fishing line unwound, the resulting ends We fix in the Special grooves, and if they are not there, we hold them with our fingers. Threading both ends into the existing holes on the outer casing of the coil. We collect the coil and fasten it to the trimmers.

If there are two grooves, fold a piece of fishing line 2-4 m long in half. Insert the loop obtained at the place of the fold into the groove between the two grooves, and simultaneously wind both ends of the fishing line along its own groove. Further actions are similar to the previous option.

There are also spools in which the fishing line is threaded through a through hole on the inside. After that, the ends of the line, and not winding, are threaded completely through the holes on the outer body of the reel, assemble the reel and begin to rotate the button, which is usually pressed, in order to release the line during operation as it wears out. Turning the button. the line itself is wound inside. In this case, twisting it in the “wrong” direction will NOT work, since it can only rotate in one direction. If you get used to it, you can wind fishing line on such a reel without even disassembling it. you just need to combine the through hole of the inner drum with the holes on the outer body of the reel, and then thread the fishing line through them.

That’s all on this issue. Happy winding!

We wind the line on the trimmer spool

Owners who have their own backyard plots often face the problem of lawn maintenance, namely, the need for high-quality mowing of grass. For THESE purposes, either a hand or a scythe, powered by electricity, is used. a trimmer (see Photo). It is clear that working with the electric model is much easier and faster. The grass is mowed with a line rotating at high speeds. But during operation, the thread wears out over time and requires a change. So how to wind the line on the trimmer reel with your own hands?

Types of fishing line

The trimmer thread can be divided into types according to its diameter. It can start as small as 1.2 millimeters and go up to 4 millimeters. The most commonly used is the 2 mm diameter. But it must be selected strictly individually, based on the specific model of the device. Often the required product diameter is indicated in the product passport. Typically, the more powerful the trimmer, the larger the line diameter should be. For example, it is best to wind a thread with a diameter of 2.4 millimeters on a spool of lawn mowers, and for a product with a weak engine, a thread diameter of 1.6 millimeters is suitable.

Fishing lines also differ in the type of section. It can be round (for mowing ordinary grass), square (for soft and often mown grass), with sharp edges (for tall grass), with a notch (for thin grass), and also complex (see Photo). The latter can not be refueled in all types of devices. It should be noted that the line is intended solely for cutting grass. To cope with other types of plants, you need to use a lawn mower with a sharp knife. The length of the threads that can be tucked into the trimmer can range from 10 to 100 meters.

How to wind the line onto the trimmer spool

Product spools can have different yarn feeding systems. It can be manual, semi-automatic or automatic feeding. Depending on this, it is necessary to wind the fishing line. So how do you thread the bobbin? To begin with, the cap is unscrewed on the coil (see). If the thread on it is left-handed, then you need to turn it clockwise, and not as usual.

Such a thread is made so that during the operation of the product, the trimmer head cannot unwind. To thread the thread, you need about 5 meters of material (see photo). It must be folded strictly in half, the center must be inserted into a specially designated place on the device and wound in the direction of the arrow, which should be drawn on the coil, as in. After that, you just need to screw the caps.

Correctly selected anatomical mattress is a guarantee of health and comfortable sleep. Its main task is to provide the correct support for the spine during.

It is difficult to imagine an easier and absolutely healthy way to heat food than cooking with an electric grill. Thanks to a unique device.