How to Winding a Wire Lawn Mower Properly

Many, having developed a factory line on a newly acquired trimmer, try to rewind a new one, but they cannot, because they do not know how to wind the line onto the reel spool (bobbin). It seems that there is an instruction, but it still doesn’t work out. Let’s try to deal with this issue in this article.

So, to rewind the fishing line, you need, for starters, to remove the reel from the trimmer – it will be more convenient. The removal method will depend on the type of trimmer.

Remove the coil from the trimmer

How to Winding a Wire Lawn Mower Properly

On small electric trimmers with the bottom position of the engine (when it is when working near the ground), the coil usually has two keys on its sides. We click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is taken out, on which the fishing line is directly wound. When parsing, be careful: there is a spring inside that can fly out and get lost.

On electric and petrol trimmers with a curved bar (it is still not possible to put a knife on such trimmers), you need to grab the coil body with one hand, and with the second hand you need to start turning the lamb on it. It is he who fastens the coil to the trimmer bar. Having unscrewed the lamb, carefully remove the entire coil, being careful not to lose the spring inside.

On electric and petrol trimmers with a straight rod and a gearbox at its end (in addition to fishing line, you can also install a knife on such trimmers) we look for a hole under the coil, insert a screwdriver into it, for example, rotate the coil quietly until the screwdriver penetrates even deeper, and the coil will lock. Now twist the entire coil clockwise (since the thread is left) and remove it from the trimmer. Then we disassemble the coil. It can be assembled using latches or twisted by a lamb. If the coil is on latches, then we press on the sides on the base of the latches so that they bend and release one half of the coil body from the other. We just twist the lamb. There may also be a third type of connection of two halves of such a coil: with it, you need to grab the lower part with one hand, and the upper one with the other, and start turning them in opposite directions. When disassembling such a coil, you must also make sure that the spring inside is not lost.

More than 200 types of trimmers in one place at the lowest prices. Click and see

Now, having removed and disassembled the coil, we proceed, in fact, to winding.

Winding process

If your coil is designed to work with only one antennae, then everything is simple. You need to rewind 2-4 m of fishing line (depending on the size of the reel), find the hole fixing the line on the inside of the reel, insert one end of the line there and start reeling the line in the direction opposite to the direction of rotation of the reel on the trimmer. On the inside of the reel, they usually indicate an arrow, in which direction to wind the line. After winding up the fishing line, we leave a small piece of it unwound to expose it. We fix this piece in a special groove located on the inside of the reel and designed so that the fishing line does not unwind at the time of collection of the reel. If there is no such groove, then you will have to hold the fishing line with your finger to prevent it from unwinding during the further collection of the reel. Next, we take the outer part of the reel and thread the outer piece of fishing line into the existing hole, collect and put the reel back on the trimmer.

If the coil is designed to work with two antennae, then do the following. On the inside of the reel, we see how many grooves are available for winding fishing line. There may be one or two. If there is one groove, then both antennae are wound along this same groove. If there are two grooves, then each antennae is wound on its own groove. The reel with one groove should have a through hole into which the line is threaded. Unwind 2-4 m of fishing line, thread it through this hole so that on each side of the fishing line sticks out equally. And at the same time we wind both antennae of the fishing line in the same direction, opposite to the direction of rotation of the coil on the trimmer and coinciding with the direction indicated by the arrow on the inside of the coil. We leave a little fishing line unwound, we fix the ends in special grooves, and if they are not there, hold them with our fingers. Pass both ends into the holes on the outer coil body. We assemble the coil and attach it to the trimmer.

If there are two grooves, we fold the piece of fishing line 2-4 m long in half, insert the loop obtained at the bend point into the groove between the two grooves, and simultaneously wind both ends of the fishing line in each groove. Further actions are similar to the previous option.

There are still reels in which the line is threaded through a through hole on the inside. After that, the ends of the fishing line, without winding, are threaded completely through the holes on the outer casing of the reel, the reel is assembled and the button, which is usually pressed, is rotated so that the line can be released during operation as it wears out. Turn the button – the line itself is wound inside. At the same time, turning it in the “wrong” direction will not work, since it can only spin in one direction. If you get used to it, then you can wind the line onto such a reel without even taking it apart – you just need to combine the through hole of the inner drum with the holes on the outer case of the reel, and then thread the line into them.

That’s all for the matter. Good winding!

Undoubtedly, a well-groomed and beautiful lawn is the pride of every summer resident. And each of whom knows firsthand that achieving such a result is quite difficult, takes a lot of time, and the waste is quite large. So what to do? After all, I want so much that my lawn looked no worse than that of a neighbor.

Well, that day has come when you can enjoy your country house, but here a different question arises regarding the landscaping of the plot. First you need to get the seeds of the lawn grass, which will most suit your needs and preferences. The second point is both planting and growing landscaping painstakingly and carefully caring for him.

Video: How to Winding a Wire Lawn Mower Properly


After your grass has grown, it requires very careful care in order to be able to be an “ornament” of your lawn. You may ask: how to do this? Everything is very simple! For this kind of manipulation you need to purchase a high-quality and versatile lawn mower, through which you will have the opportunity to keep your site clean and tidy always.

If you are new to this issue and have never used this kind of tool before, and you don’t have any idea how to choose the right and practical mechanism, then this article is for you.

Since here you can get all the necessary information regarding what you first need to pay attention to when buying a device, and we will also take a look at each type of lawn mower, in particular, aspects of choosing one or another type.

How to choose a lawn mower

First of all, it is worth noting that there are gardeners who prefer to use gasoline manual lawn mowers trimmers when working with the lawn. But there is one caveat that these landlords apparently don’t know about, which is that this kind of device does its job perfectly, it is unconditional, but it is intended for mowing weed grass, but not for lawn.

Since this mechanism you can not achieve a beautiful and accurate result. Moreover, the trimmer can cause damage to the grass itself, especially if it “touches” the soil under it, and this is inevitable in most cases.

By clicking on this link you will easily find the user manual for the Druzhba 4 chainsaw, which should not be neglected.

The power of the MTZ 80 tractor is much higher compared to previous models from this manufacturer, which is its undeniable advantage. Only here //machinspec.Com/selskoxozyajstvennaya/traktor/mtz-80.Html, we will provide you with reliable information about this transport.

Therefore, if you are a conscientious host, and want your site to look beautiful and well-groomed, in this case you will have to, a little say, spend money and buy a good lawn mower in the direction of activity, which will be the care of grass of a lawn nature.

But today we will pay due attention to electric and gasoline lawn mowers and note that they are both manual and self-propelled. I would also like to mention that self-propelled lawn mowers with a seat are perfect for owners of large areas, for more information about this miracle of technology, look here. Actually, let’s figure out which lawn mower to choose for a summer residence and actually what it is worth paying attention to first of all. So let’s get started.

Recommendations for choosing a mower on the video.

Gasoline models

Hand held

Even despite the fact that such devices have a fairly high level of popularity, these tools have peculiar disadvantages, among which we can note: toxic exhaust, high noise figure, and professional service.

But not everything is as bad as you thought, since there are positive aspects to these lawn mowers regarding other devices, namely: convenient start-up of the tool, they have inexpensive models, ease of operation, correct drive arrangement, as well as they are quite practical and reliable.

Moreover, such manual lawn mowers are not particularly demanding regarding maintenance of a technical nature. Moreover, if you are “wise” about your lawn mower and correctly distribute the load precisely during its operation, then in this case it will be able to serve you for more than a dozen years.

It is also important that if you need a gas mower, which one is not easy to choose, must first of all fully meet all your needs. As soon as you decide on them, it will immediately become easier for you to actually determine the model itself. You must consider exactly what area the machine will need to process. For example, there are special gasoline self-propelled lawn mowers for tall grass, which are ideal for working on overgrown areas, or rotary mowers.

Another important point is that if your site has a large number of shrubs, lawns, trees and other, let’s say, obstacles "for the device, then in this case you should also" emphasize "the maneuverability of the mechanism.

Take a look at the video features of choosing a lawn mower.

Self-propelled

Many landowners are interested in questions: what should be a self-propelled gasoline mower, how to choose, the price of the device also does not leave without due attention. Now we will try to provide you with all the necessary information regarding the choice of such a mechanism. So.

Moreover of no small importance in this case is the width of the wheels themselves. However, there are also features of such a choice, because if your lawn has a decorative direction, in this case the large wheels will simply take the grass during the operation of the device, so it’s more advisable to choose small and wide wheels. There are different variations of gasoline lawn mowers on wheels, which we will talk about in this article.

The next thing you should focus on is the engine, namely its power, as this feature directly affects both the performance of this device and the quality of the direct haircut.

You must remember that the more power the engine has, the more beautiful and accurate the work will be performed, Moreover, the quality also depends on the speed that the engine can “accelerate”.

Below you will find the main points that you need to pay attention to when choosing and buying this kind of irreplaceable tool. So:

  • Motor power;
  • Herbs collection should have such a design that would allow its easy cleaning and easy removal;
  • Wheel size (thickness, diameter);
  • Knife design;
  • Type of starter (battery, electric, manual);
  • Adjustment of the height of the grass mowing;
  • Cost.

Electric Lawn Mower

Manual model

First of all, what I would like to draw your attention to is that manual electric lawn mowers are suitable exclusively for those areas where there are not a large number of stones and potholes, and the land is rich in chic green grass, which actually needs to be brought in, as they say in order.

There is no doubt that such a mower on such a site will perform its work smoothly and efficiently. But many owners wonder: how to choose an electric lawn mower for a summer residence?

However, let’s now actually talk about the very choice of this kind of device. Since, knowing all the necessary nuances that you need to pay attention to, you can make the right choice of a tool in your direction without any problems.

It is also important that, for example, unlike motocross, such devices can be used exclusively for cutting low grass, because if the growth of grass is too high, then this device in this area simply can not move.

Naturally, the power available to mowers of this direction cannot be left without due attention. In addition, when choosing a tool you should carefully study what height of the grass one or another model can mow, as well as the bevel width.

It is worth noting that in most cases the lowest height indicator that this type of mower can “take” is 20 mm, and the highest is not more than 75 mm.

In addition, during the selection you must be prepared for the fact that her can not be used when it rains, the manipulation itself will be carried out in a radius that allows you to install directly the cord that is connected directly to the outlet, and also such devices have a certain time range of work.

Self-propelled device

First of all, it is worth noting that this kind of tool is best suited for areas that are quite large in size. One of the best units in this series is the Makita self-propelled electric lawn mower, click here and you will find out the main reasons why this particular device deserves your attention.

But naturally, the cost of such equipment is quite high. However, if you decide to lay out a tidy sum for the unit, you need to know what it is worth starting from in the process of choosing a mechanism. Namely:

  • From case material (plastic, metal). It is important to note that the first type is more reliable in that it is not subject to corrosion, but it is very fragile with respect to damage. Also plastic makes the device light, what is not unimportant in working with him;
  • Knives – they can have any shape, so here is at your discretion;
  • Grass catcher – it should be convenient, easy to remove and clean;
  • Motor power – the higher the grass, the more power should be greater;
  • The width of the grip itself – the wider it is, the more productive and better the work is done.

Aspects of choosing an electric lawn mower on video.

Findings

In fact, lawn mowers have become simply indispensable for most of us, so it is not surprising that the modern market has such a huge number of different models. Undoubtedly, these tips will greatly facilitate the process of choosing the “iron assistant” you need. If the processing volume of this mower is too small for you, can it make sense to see something more powerful? Read the article that describes the mower for the neva mb 2 tiller.