How To Work With A Punch Without Dust

How to drill with a dust-free rock drill Let’s discuss how to drill with a dust-free rock drill. And also: disadvantages when using a vacuum cleaner, how to avoid dust when drilling a wall and drilling a ceiling.

How to drill a ceiling without dust with a hammer drill

The situation is more complicated here. You can apply the same construction as described in the previous paragraph. But the effect from it will be worse. Alternatively, we use a disposable plate, or a disposable plastic container pierced in the middle with a drill. If you do not add too much speed, then most of the dust when drilling the ceiling will fall into this additional element. During operation, this plastic part will need to be held with your hand to avoid rotation.

How To Work With A Punch Without Dust

Dust-free hammer drilling into the ceiling.

The best option in this case is still a vacuum cleaner.

In general, decide how to operate a dust-free rock drill according to the situation.

How to drill with a hammer drill without dust

When drilling a hole in concrete or brick with a hammer drill, a lot of dust is generated. When construction processes are underway, this does not bother anyone. If you need to drill a hole in a residential, clean room, this becomes a problem. Dust, especially brick dust, will ruin wallpaper, upholstered furniture and other interior elements.

In this article, we will discuss how to work with a dust-free rock drill. Or how to neutralize it while working.

Drilling holes with a dust-free hammer drill.

Disadvantages when using a vacuum cleaner

Some people use a vacuum cleaner. This is a good option to avoid dust when drilling with a hammer drill, but not always acceptable. This unit may not be at hand. It takes two people to work with it. One drills a hole with a hammer drill, the other holds the suction tube of the vacuum cleaner next to the working part of the drill. All dust is sucked into the vacuum cleaner. But one cannot cope in this situation. It is inconvenient for one person to monitor two operating devices simultaneously, holding their parts in the right places.

How to drill a wall without dust

To drill a wall with a dust-free perforator, you will need two things: tape and a plastic bag, which are used for packaging.

It is preferable to use masking tape. Let’s mark future holes on the wall in the right places. We glue the opened plastic bag under the mark on the wall with tape. It must be held in such a way that the dust from drilling is all poured into it. You can drill carefully, the main thing is not to gas. Then the waste is poured into a bag.

It is necessary to add revolutions at the hammer drill, as part of the dust will spread around with a stream of air from the engine fan. If you beat it carefully, at low revs, the process will go just fine. You will collect all the dust in a plastic bag. It can be used repeatedly.

An important point: the tape must be glued to the wall very tightly. Not sticking tightly will cause dust to fall between the wall and the tape and stain the wallpaper.

How to work with a puncher: 7 nuances that are important to know

Even small repairs, not to mention professional construction, are not complete without the use of a hammer drill. It is with its help that you can make a hole in a stone wall or a depression in a concrete structure. Therefore, both the home craftsman and the builder should know how to work with a puncher.

Also, such a tool allows you to quickly and easily drill the required number of holes in ceramic tiles, brick, wood, metal. And additional nozzles will allow, for example, to drill the floor, compact the material, hammer in the rod and even tighten the screw.

Depending on the application and the availability of additional accessories, the rotary hammer can be used for a wide variety of construction operations. But how to do it correctly to prevent the tool from breaking down?

For what materials can the rotary hammer be used:

  1. Is it possible to tighten screws, self-tapping screws with a puncher? Whenever possible, many professional builders prefer to use a power tool that is capable of performing the functions of several types of equipment. The puncher is one of them. For quick and convenient screwing in screws or screws, special nozzles are used. Among them there are models with a limiter, which guarantee control of the recession of fasteners.
  2. Is it possible to interfere with the solution with a perforator? It is possible, and quite effective at a low viscosity of the solution (for compositions of high viscosity, it is recommended to use a stirrer nozzle and work at minimum speed). Additional arguments in favor of this use can be that the speed of rotation of the tool shaft can be easily changed. In addition, according to the principle of its operation, the perforator differs little from the construction mixer.

3. Can a puncher drill wood? Using a puncher, you can get enough quality holes. To do this, you need to use the power tool in drill mode and use special drills. The drilling speed is determined depending on the material and hole diameter.

4. Can a puncher drill tiles? The main problem in working with ceramics is that they can crack if mishandled. That is why, when using a hammer drill, it is necessary first of all to turn off the percussion mode, and it is better to start drilling at low speeds with a gradual increase in speed.

Five. Can a puncher drill metal? Provided that a special drill is used, it is possible to create holes with this tool in almost any material. In most cases, they have a cylindrical shank and a spiral design. The material for their manufacture is high strength steel (often based on cobalt alloys). Versatile in use will be drills equipped with carbide inserts on the cutting edge.

Rotary hammer care tips

The service life and the overhaul interval directly depend on how timely and competently the set of work on the maintenance of the perforator is performed. Much attention should be paid to the lubrication of the gearbox, especially if work is carried out with concrete structures, the drilling of which is accompanied by the formation of a large amount of dust.

A good protection against it can be the use of a vacuum cleaner; many models of power tools are even equipped with special devices for fixing the hose. It should also be borne in mind that when operating at low speeds, the equipment quickly heats up, therefore, constant monitoring of the rest and work mode is required.

After the end of use and disconnection, it is recommended to clean the tool with a soft cloth from dirt. A soapy solution can be used if necessary. Pay particular attention to the cleanliness of the ventilation openings. It is equally important to conduct regular preventive inspections of equipment.

Also, before starting work, it is imperative to lubricate the nozzle shanks. This is to avoid excessive stress on the drill barrel due to friction. If such work is not performed, then it can result in expensive repairs.

Working with a punch in different modes

Drilling mode

It is recommended to start drilling at a low speed without pressing the surface too hard. After starting the engine, it should run in idle mode. This is necessary so that, in the event of vibrations, extraneous noise or smoke, react in time to a malfunction and prevent more complex consequences in the form of injuries, damage to building structures, complex tool breakage.

In the technology of performing work, much depends on the characteristics of the material. For example, there are often questions about how to drill metal with a hammer drill. Experts recommend using only high-quality drills that are specifically designed for such operations from trusted manufacturers. In addition, the surface must be properly prepared. The hole is made in stages with a gradual expansion of the diameter to the desired size.

Impact drilling mode (drilling)

The hammer drill has become a common designation for the drilling mode among most manufacturers of construction tools. Particular attention during the execution of work should be paid to prevent skewing of the nozzle. It is also important not to put additional pressure on the rock drill, this will not increase the motor power or speed up the work.

This function is not always used. For example, before drilling tiles with a hammer drill, it is important to turn off the impact mode and prevent the drill from sliding over the surface, which often causes scratches.

Impact mode

To work in impact mode (the toggle switch rotates to the position indicated by the hammer), special chisels are used. During operation, the perforator must be clamped with both hands. In the process, the chiseling speed can be adjusted depending on the characteristics of the work performed. It is necessary to constantly monitor the tool, since situations often arise in which the drill inside the structure stumbles upon the reinforcement. If the hole becomes full of crumbs, it is enough to remove the drill in idle mode to clean it (you can also use a construction vacuum cleaner).

Preparing the punch for work

Pre-preparation of the tool is required in cases where it is assumed that during operation, replacement of bits will be performed. In this case, the following operations are carried out:

  1. Removing and cleaning the cartridge;
  2. Lubrication of its inner part;
  3. Installation of the cartridge with the lubricating ring shifted;
  4. Turning the cartridge for more reliable fixation;
  5. Blocking after releasing the ring.

All work in accordance with the operating instructions and safety precautions can be performed only on condition that the rotary hammer is disconnected from the mains. It is recommended to run the tool in idle mode before use. This is necessary to make sure that there is no extraneous noise, vibration while working with a drill or chisel.

Rock drill tips

There are several rules for operating rock drills that must be followed.

  • During work, do not press too hard on the tool to prevent damage to the drill. Power and performance will not increase from this in any case.
  • A common mistake is the desire to perform the entire operation in full at one time. The drill needs to be cleaned periodically.
  • The choice of equipment is determined by the type of work performed and the specific features of the tool itself. For example, when using one type of rotary hammer, an adapter is required to replace the nozzle, and the second has a quick-release design.
  • Mechanical damage or systematic overheating of the equipment is not allowed. When choosing, you should pay attention to models in an aluminum case, which, due to the nature of the material, always cool better.
  • When working with the hammer drill, it is recommended to wear rubber gloves, which will help to dampen vibration, despite the fact that the tool itself is equipped with special inserts for this purpose.

What time can you work with a puncher

So that during the repair there are no problems with neighbors, it is worth focusing on the following standards for the permissible noise level.

  1. Brief description of perforators
  2. How to prepare a hammer drill for work
  3. How to work with a punch in different modes
    • Drilling mode
    • Impact drilling mode (drilling)
    • Impact mode
    • Techniques for working correctly with a punch
    • Rotary hammer care and operation
    • When you can make noise with a puncher

    Drilling mode

    The tool must first be switched to drilling mode without impact. The toggle switch is installed opposite the mark, which looks like a drill. After that, you need to place the drill in the right place and turn on the tool using the button. When drilling, you do not need to press hard on the drill, the pressure on it should not be more than five kilograms.

    When using drill chucks, do not use the counterclockwise rotation and drilling under impact positions, as this could damage the chuck and separate it from the power tool. To prevent such a situation, the hammer drill has added an impact blocking function, designed for drilling various holes in wood or metal.

    Before the actual operation of the tool, it is necessary to check the mode in which it is located. The rock drill should be idling for about one minute. Pay attention to the operation of the gearbox. There should be no extraneous noise, vibration and knocking. The smells of burning or the appearance of smoke should also alert. They can appear in the event of a malfunction of the power tool.

    Brief description of perforators

    To understand how to properly work with a punch, consider its capabilities.

    The purpose of this powerful handheld power tool is to hit hard structural materials such as reinforced concrete, metal and stone. With the help of a perforator, you can not only drill holes of different diameters, but also chip off old tiles, break through floors and walls, punch openings for utilities.

    The hammer drill is capable of working in different modes, which makes it an almost universal tool. This rotation with impact and without impact, drilling in concrete, stone, metal and wood, impact without rotation. A professional hammer drill can also replace a jackhammer.

    An impact mechanism is located inside the punch. Electro-pneumatic or electromechanical. To activate it, just press a button. The mechanism itself produces a blow, additional efforts are not required.

    The main disadvantage of this tool is its considerable weight. By weight, perforators are conventionally divided into 3 groups: light up to 18 kilograms, medium from 18 to 25, heavy over 25. The technical characteristics indicate the impact force, which in most household rotary hammers can be from 2 to 3J, and in professional tools. From 2 to 10 and from 5 to 18J, as well as the frequency of beats per minute, depending on the power, reaching from 23 thousand beats per minute to 44.5 thousand.

    Rotary hammers use two attachment systems for interchangeable tools. These are SDS and SDS-MAX. Their differences in shank diameters are 10 mm and 18 mm, respectively. On light hammer drills, the weight of which does not exceed 5 kilograms, the SDS cartridge is installed. Such tools can be both household and professional. The SDS-MAX chuck is designed for rock drills weighing more than 5 kg. SDS-MAX tools are used professionally.

    How to prepare a hammer drill for work

    Before starting work, you need to understand the installation and removal of a removable tool, the fastening system of which depends on the weight of the hammer drill.

    Let’s consider the installation of a removable tool using the example of using the BOSCH GBH 2-26 perforator. It uses SDS shank bits with four splines. Before installing the drill, clean its shank and lubricate it with a special drill lubricant. Lubrication contributes to a smoother operation of the rock drill and increases its service life.

    The oil ring must be moved back to install the tool. The cartridge is opened and installed. Then it needs to be turned a little and fixed in the desired position. After that, the slip ring should be released, which makes it possible to lock the tool. Make sure that the tool is properly locked in the desired position. Be sure to turn off and unplug the punch before installing or removing parts.

    For more convenient work with the hammer drill, you need to attach a soft additional handle to it, which reduces the vibration level. Before starting work, make sure that it is attached securely enough.

    How to work with a puncher in different modes. Impact drilling mode (drilling)

    First you need to switch the hammer drill to hammer drilling mode. In this case, the toggle switch is installed above the mark with the image of the drill and hammer. After that, the drill must be positioned where it is necessary to make a hole, and then turn on the tool.

    During drilling, you need to try not to skew the drill, not allowing it to slide from the desired point. The hammer drill must be held firmly, but do not put pressure on it. Light pressure gives optimal results.

    When filling the hole with crumbs and dust, try to empty the drill out to clear the debris. This will facilitate further work.

    When drilling in concrete, the drill bit may bump into the reinforcement. In order not to lose control of the tool, you need to take into account this possibility even before starting work and immediately take a comfortable position, securely holding the hammer drill.

    How to work with a puncher

    Rock drills are designed for applications such as drilling and drilling in durable building materials. They have several modes of operation and chucks that allow the use of different attachments: drills, drills, lances and chisels. Such abilities turn the hammer drill into a multifunctional tool that can handle complex tasks.

    What not to do with a hammer drill

    The hammer drill can even be used as a concrete mixer. Many craftsmen use this tool to mix grout or tile adhesive. But hammers, despite their large size, are not very suitable for this. They do not have reduction gears like slow speed drills. Therefore, during mixing of thick and viscous mixtures at low speed, the rotary hammer motor experiences greater loads than when drilling concrete. And this negatively affects its durability.

    It should also be remembered that chiseling without rotating the chuck is an auxiliary function of the punch, and not the main one. The design of the tool is not designed to last long in this mode. If you have to carry out large volumes of dismantling work or cut a new opening in the wall, then it is better to take the appropriate tool: a jackhammer and a diamond circular saw.

    Chiseling mode

    The hammer drill can work as a jackhammer, that is, in chiseling mode without rotating the chuck. To do this, you need to switch the toggle switch to the position indicated by the icon with the hammer, and fix the nozzle in the form of a chisel or lance in the chuck. In this mode, the tool can be used to dismantle brickwork, widen openings, or knock tiles off walls and floors.

    Drilling mode

    In drilling mode, the hammer drill works as efficiently as a conventional drill. Difficulties can arise only due to the fact that the hammer drill is larger and heavier than a drill of the same power.

    • Start drilling at low speed and without pressure. When the drill has made a hole a few millimeters deep, you can press down on the tool with little force.
    • Do not press down on the punch too hard. Overloading can cause the drill to jam in the hole and be difficult to remove.
    • During work, periodically remove the drill from the hole to clear it of dust and debris that interfere with work.

    Always use special drills: some for metal and others for concrete. Drilling equipment for different materials differs in design and geometry. Drills for metal and concrete can be easily distinguished by their sharpening angles and the size of the flutes for evacuating chips or stone chips. In addition, concrete and stone tooling has carbide (victorious) solders, which cope well with hard and durable building materials.

    Impact drilling mode

    The hammer hammer mechanism allows you to quickly and efficiently drill holes in concrete, brick or stone. Impact mode cannot be used when drilling metal or ceramics.

    Hold the hammer drill perpendicular to the surface during hammer drilling. Do not skew, as this can damage the tool and accessories.

    Rotary hammer maintenance

    In addition to information on how to operate a hammer drill, you need to know how to maintain it. This tool is designed for heavy loads and intensive use. It must work in difficult conditions, so the design of the rock drill is as reliable as possible. But it contains components and parts that require periodic attention and timely maintenance.

    Drilling mode

    In drilling mode, the hammer drill works as efficiently as a conventional drill. Difficulties can arise only due to the fact that the hammer drill is larger and heavier than a drill of the same power.

    • Start drilling at low speed and without pressure. When the drill has made a hole a few millimeters deep, you can press down on the tool with little force.
    • Do not press down on the punch too hard. Overloading can cause the drill to jam in the hole and be difficult to remove.
    • During work, periodically remove the drill from the hole to clear it of dust and debris that interfere with work.

    Always use special drills: some for metal and others for concrete. Drilling equipment for different materials differs in design and geometry. Drills for metal and concrete can be easily distinguished by their sharpening angles and the size of the flutes for evacuating chips or stone chips. In addition, concrete and stone tooling has carbide (victorious) solders, which cope well with hard and durable building materials.

    Chiseling mode

    The hammer drill can work as a jackhammer, that is, in chiseling mode without rotating the chuck. To do this, you need to switch the toggle switch to the position indicated by the icon with the hammer, and fix the nozzle in the form of a chisel or lance in the chuck. In this mode, the tool can be used to dismantle brickwork, widen openings, or knock tiles off walls and floors.

    What not to do with a hammer drill

    The hammer drill can even be used as a concrete mixer. Many craftsmen use this tool to mix grout or tile adhesive. But hammers, despite their large size, are not very suitable for this. They do not have reduction gears like slow speed drills. Therefore, during mixing of thick and viscous mixtures at low speed, the rotary hammer motor experiences greater loads than when drilling concrete. And this negatively affects its durability.

    It should also be remembered that chiseling without rotating the chuck is an auxiliary function of the punch, and not the main one. The design of the tool is not designed to last long in this mode. If you have to carry out large volumes of dismantling work or cut a new opening in the wall, then it is better to take the appropriate tool: a jackhammer and a diamond circular saw.

    Impact drilling mode

    The hammer hammer mechanism allows you to quickly and efficiently drill holes in concrete, brick or stone. Impact mode cannot be used when drilling metal or ceramics.

    Hold the hammer drill perpendicular to the surface during hammer drilling. Do not skew, as this can damage the tool and accessories.

    How to work with a puncher

    Rock drills are designed for applications such as drilling and drilling in durable building materials. They have several modes of operation and chucks that allow the use of different attachments: drills, drills, lances and chisels. Such abilities turn the hammer drill into a multifunctional tool that can handle complex tasks.

    Rotary hammer maintenance

    In addition to information on how to operate a hammer drill, you need to know how to maintain it. This tool is designed for heavy loads and intensive use. It must work in difficult conditions, so the design of the rock drill is as reliable as possible. But it contains components and parts that require periodic attention and timely maintenance.