Hydrogel film can be cut

Features of the hydrogel film

The hydrogel film is made of a polymer material that absorbs and retains moisture. It has high strength, is able to protect the smartphone screen from scratches and scuffs.

Hydrogel film

What devices can I apply the hydrogel protective film to??

• On a smartphone.
• On smart watch.
• Fitness bracelets.

Soft Hydrogel Film Screen Protector, Is it Good? How to Apply it?

Advantages of the hydrogel film

• Resistant to mechanical damage.
• Fully transparent, does not affect color rendering
• Easily sticks to your phone screen, and comes off quickly.
• Does not degrade sensor sensitivity.
• Complemented with perfect speaker cutouts, middle button.
• Does not emit harmful substances, absolutely safe
• The surface is protected from the appearance of fingerprints.
• Long lasting to use
• Possibility of gluing several times
• Affordable price.
• A characteristic feature of the hydrogel film is the self-healing property of the surface. Minor scratches are completely healed within 24 hours. The deep ones shrink, but do not disappear by 100%.

The hydrogel film has anti-reflective properties. Images on the screen are perfectly visible, even in the open sun. At the same time, it is not “dried” in air and under the influence of ultraviolet radiation. Possesses high wear resistance, retaining primary properties throughout the entire service life.

It is very easy to care for the film. Since it does not leave fingerprints on its surface, it can be cleaned with ordinary tissues or a soft cloth.

Hydrogel film or protective glass?

Hydrogel film for phones is an interesting novelty on the market of accessories for gadgets. Today it raises a lot of questions from potential buyers who are eager to get acquainted with its properties and advantages of use. How good it is and how to use it, we will tell further.

Most asked questions

Glass, regular film or hydrogel film, whichever is better?
The hydrogel film has unique properties that cannot be compared with conventional film and protective glass.

It will protect the display from falling?
According to the test results, the hydrogel film has a good impact resistance. If your job or field of activity is associated with harsh operating conditions and you often drop your phone, stop dropping it. or choose a case with protruding sides above the display, which will most likely save your device.

The hydrogel film has an oleophobic coating?
Hydrogel films have an excellent oleophobic coating, as a result of which the device gets much less dirty even with the most active use.

How long does it hold on the display?
Unlike conventional film and glass, the hydrogel does not peel off at the edges after several months of use. The term of its use is several times higher. The property of restoration cannot be compared. Classic protective accessories simply don’t have it.

How long does the application process take??
Depending on the phone model, smart watch or fitness bracelet, the procedure takes no more than 20 minutes on average.

How the hydrogel film is removed?
The withdrawal process takes less than 1 minute. It is very simple, just lift one edge with a toothpick or fingernail, gently pulling on it. There will be no trace left on the display.

The entire phone can be protected?
We currently have the option to apply to the display and back cover of the phone, the ends remain open.

How to stick the hydrogel film?

• We open the first bag, as a rule, there is a well-soaked napkin in it. We clean the surface of the screen from dust particles and dirt.
• Wipe the screen with a dry cloth.
• We remove the protective film and glue it to the smartphone screen
• To ensure that the film adheres evenly, you can swipe it over the surface with a credit card or soft cloth. Some manufacturers additionally complete sets with special cartons.

Should you buy a hydrogel film??

To buy or not is up to the owner of the smartphone to decide. It so happens that there are simply no protective glasses and conventional films for the gadget model of interest. In this case, the hydrogel film will help.

The use of a hydrogel film has not only its advantages, but also disadvantages. It is elastic, perfectly protects the phone from scratches on the screen. However, if you often drop it, you should still give preference to protective glass.

What is hydrogel film on a smartphone screen? Advantages and disadvantages

The Achilles heel of most modern smartphones is their display. A single scratch on the screen immediately creates an unpresentable look, and more serious damage, as a rule, results in expensive repairs. No wonder screen protectors, glasses and covers are so popular. And one of the latest innovations is hydrogel films.

What is a hydrogel in general??

Hydrogel is a polymer material that is resistant to mechanical damage, non-toxic and very durable. The film made of this polymer is characterized by a high degree of transparency, it is glued to the smartphone screen without any problems and is easily smoothed without leaving bubbles.

Pros and cons of hydrogel film

The hydrogel film has a significant advantage over conventional, cheaper films. an order of magnitude better optical properties. In simple terms, it is so transparent that it is visually almost invisible on the screen. This is easily confirmed by pictures from the front camera, on top of which there is a hydrogel. their quality does not suffer at all. At the same time, the hydrogel film does not glare, so the phone can be used comfortably under the bright sun.

The hydrogel film is difficult to smudge, and there are far fewer streaks and fingerprints on the polymer. To keep the screen always looking neat, it is enough to just wipe dust and dirt from the surface from time to time.

The hydrogel film is relatively durable. Ordinary ones peel off very quickly and over time turn into the devil knows what, with a polymer this, of course, will also happen, but it will take much longer.

The hydrogel film has self-healing properties. This does not mean that you can slash it with a knife, and then wait for everything to heal instantly, like Wolverine’s wounds. However, small damages and scratches on the polymer are smoothed out and disappear in about a day.

However, not everything is so rosy, the polymer also has a critical drawback. These are zero shockproof properties. If you drop your phone or hit the screen, the hydrogel film will not help at all. you will break it.

Is it worth it?

To answer this question, you need to decide what you need a film on your smartphone for. If you just want to protect the display from scratches, make it look as aesthetically pleasing as possible, and do not lose quality selfies to the front, then you should definitely try the hydrogel.

If you often drop your phone and are worried that one day you will break the screen, then the hydrogel film is not an assistant here. Better to take care of installing a protective glass or purchasing a good shockproof case.

What devices can I apply the hydrogel protective film to??

Hydrogel film. what is it and what are its benefits?

Today it raises a lot of questions from potential buyers who are eager to get acquainted with its properties and advantages of use. How good it is and how to use it, we will tell further.

Features of the hydrogel film

The hydrogel film is made of a polymer material that absorbs and retains moisture. It has high strength, is able to protect the smartphone screen from scratches and scuffs.

Advantages of the hydrogel film

• Resistant to mechanical damage.
• Fully transparent, does not affect color rendering
• Easily sticks to your phone screen, and comes off quickly.
• Does not degrade sensor sensitivity.
• Complemented with perfect speaker cutouts, middle button.
• Does not emit harmful substances, absolutely safe
• The surface is protected from the appearance of fingerprints.
• Long lasting to use
• Possibility of gluing several times
• Affordable price.

A characteristic feature of the hydrogel film is the self-healing property of the surface. Minor scratches are completely healed within 24 hours. The deep ones shrink, but do not disappear by 100%.

The hydrogel film has anti-reflective properties. Images on the screen are perfectly visible, even in the open sun. At the same time, it is not “dried” in air and under the influence of ultraviolet radiation. Possesses high wear resistance, retaining primary properties throughout the entire service life.

It is very easy to care for the film. Since it does not leave fingerprints on its surface, it can be cleaned with ordinary tissues or a soft cloth.

Most asked questions:

• Glass, regular film or hydrogel film, whichever is better?

The hydrogel film has unique properties that cannot be compared with conventional film and protective glass.

• It will protect the display from falling?

According to the resultstests, the hydrogel film has a good impact resistance. If your job or field of activity is associated with harsh operating conditions and you often drop your phone, stop dropping it. or choose a case with protruding sides above the display, which will most likely save your device.

Flexible Explosion-Proof Film Is Born For Edge Screens, It Can Protect Phone Screens Well | Hydrogel

• The hydrogel film has an oleophobic coating?

Rock Space hydrogel films have an excellent oleophobic coating, in as a result, the device gets much less dirty even with the most active use.

• How long does it hold on the display?

Unlike conventional film and glass, the hydrogel does not peel off at the edges after several months of use. The term of its use is several times higher. The property of restoration is beyond comparison. Classic protective accessories simply don’t have it.

• How long does the application process take??

Depending on the phone model, smartwatch or fitness bracelet, the procedure takes no more than 20 minutes on average.

• How the hydrogel film is removed?

The withdrawal process takes less than 1 minute.It is very simple, just lift one edge with a toothpick or fingernail, gently pulling on it. There will be no trace left on the display.

• The entire phone can be protected?

We currently have the option to apply to the display and back cover of the phone, the ends remain open.

• Can I put my drawing on the back of the phone?

Unfortunately, we do not have this opportunity, but we are constantly monitoring new products and expanding possible color solutions.

How to stick the hydrogel film?

• We open the first bag, as a rule, there is a well-soaked napkin in it. We clean the surface of the screen from dust particles and dirt.
• Wipe the screen with a dry cloth.
• We remove the protective film and glue it to the smartphone screen
• To ensure that the film adheres evenly, you can swipe it over the surface with a credit card or soft cloth. Some manufacturers additionally complete sets with special cartons.

Should you buy a hydrogel film?

To buy or not is up to the owner of the smartphone to decide. It so happens that there are simply no protective glasses and conventional films for the gadget model of interest. In this case, the hydrogel film will help.

The use of a hydrogel film has not only its advantages, but also disadvantages. It is elastic, perfectly protects the phone from scratches on the screen. However, if you often drop it, you should still give preference to protective glass.

Hydrogel film in the sun

The hydrogel can be glued to the screen instead of glass. How is it superior to glass and conventional films:

Does not distort the image

Has high transparency. no coating feeling

• The presence of an oleophobic coating, like glass

As we saw it: as if there was nothing on the screen at all. No matter how we tried to turn the smartphone to decrease and increase the brightness, nothing changed: there was a feeling that the screen was not protected by anything and nothing interfered with using the smartphone.

Testing self-healing

We pasted over two Xiaomi smartphones: Mi 9 Lite and Redmi Note 5.

On a transparent coating, we went too far with the force of pressing the scissors, but it turned out even more interesting: we were sure that we could not cope with such damage. The hydrogel decided to really surprise us.

On the colored coating, the film tightened much better, there was only an imperceptible dent from the scissors, all from the same busting with pressing force. If you do not tilt and peer into the coating, it is not visible and not felt with your fingers. Let’s be honest: I had to try to catch it in the frame and show you clearly.

Hydrogel coating properties

We have already said a few words about properties, now in more detail.

Self-healing. scratches really shrink after a while, and if you warm up the scratch with a hairdryer, it literally tightens before your eyes. Below are our photos and videos

Hides existing scratches and imperfections of the case

It repels moisture, the name “hydrogel” itself speaks about it: “hydro” means “water”, photo below

Protects your device for a long time, on average. about a year

Leaves no trace

Suitable for ANY smartphone, see below

It is difficult to accidentally damage or peel off the film without noticing it. At the same time, it is very simple to dismantle it: you need to pick up the edge with something sharp and just remove it.

The hydrogel coating is versatile

The coating itself “out of the box” looks like a colored or transparent sheet.

A special plotter machine gives it the desired shape: you need to enter the model name, select the side of the smartphone for cutting and wait half a minute.

The plotter will make all the necessary cuts and cut the film to the desired shape.

As you can see, even the cutout for the Apple logo has not gone anywhere, like a place for a finger behind the back panel and for each camera and flash module.

The film is mounted in a couple of minutes. Below is the appearance of the smartphone before pasting: many deep scratches on the case, knocked edges. In other photos, you can see how the film covered them.

If your smartphone has a glass body, the transparent hydrogel coating will hide scratches just as well as colored ones on metal.

Protective hydrogel film on your phone or glass? Benefits

The protective film for smartphones has long been a thing of the past, and glass has replaced it. Since 2013, glass has been the most reliable tool for protecting smartphones and gadgets from scratches and damage.

In 2019, a hydrogel film appeared on the market.

What it is? It is a moisture resistant and self-healing non-toxic polymer. Yes, scratches on such a coating disappear! Due to its many properties, surpassing those of protective glasses and conventional films, the hydrogel quickly became popular, and gradually began to appear on the shelves. This coating came to Russia quite recently and we could not help but test it.

Whether to glue the hydrogel film?

Our answer is “Yes!” We found a bunch of pluses in this kind of coverage:

Does not require frequent replacement, like glass and film (1 hydrogel coating = 3-5 glasses for the duration of wear)

Many design options for its lovers and a variety of even transparent films

Self-healing magic (want a vidosic?)

Hides the flaws of the case

Suitable for any smartphone due to plotter cutting

We run a lifetime test to see for ourselves that the hydrogel is so durable. During the month of the experiment, the front cover really did not lose its accuracy. We will definitely make a photo report 🙂

Like is the best “thank you”! 🙂

Which coating is better. transparent or with a design? We are waiting for your opinion in the comments, and we will definitely share ours;)

Benefits

Speaking about the disadvantages of the hydrogel film, we can only say about its protective properties. Film. it is, after all, not a protective glass. Although it protects the display, it may not work if dropped or hit hard.

Protective hydrogel film for a smartphone: the perfect way to protect your gadget

When you buy a brand new smartphone, you blow off every speck of it, you take care of it as if it were the Olympic flame. A week later, you are no longer afraid to put it face down, carry it in your without any problems, use your hands with greasy burger hands (not naaado like that). A month later, you calmly throw it aside when the alarm clock rings, you are not afraid to wet it in the rain and you can easily vent your anger on it. Common situation? =)

Of course, the manufacturer of a modern smartphone is trying to make its gadget as durable and reliable as possible, using a bunch of technologies and materials for the display and back cover of the device. Sapphire glass, Gorilla Glass and other materials and systems still cannot make the screen of a gadget eternal and invulnerable to scratches. Everyday situations, haste and “sleight of hand” often cause the smartphone to fall or damage it in another way. Fortunately, there is an opportunity to protect your “baby” from such fucking.

Hydrogel: what will save your smartphone!

If you are the type of person who always scratches the display on your phone or smartwatch, then the hydrogel film can really be your salvation! This is a relatively new technology that allows you to cover the smartphone display with an ideal-sized protective film.

For clarity of the situation, let’s turn a couple of years ago, when smartphones just started to be “covered” with protective films. At first, these were ordinary polyethylene terephthalate films (read? =)). Abbreviated. PAT. They have three layers: the main one is polyester, on the front side it is covered with a matte layer to protect it from scratches, and on the back side. adhesive silicone, which is attached to the display. However, over time, smartphone screens began to improve, with rounded edges and curved shapes. And here the rigid and inflexible PET films are no longer suitable. Of course, the market of manufacturers began to adjust and this is how hydrogel films appeared.

Hydrogel film. it is a thin and flexible film that allows you to perfectly cover the screen of your smartphone or smart watch.

Ideality is achieved thanks to a special device (similar in appearance to a printer), which cuts out the required dimensions from the layout for a specific gadget model. All that is needed. this is to enter the data and put the model in the appropriate compartment. Sounds like fantasy! But no, this is not a gift from Darth Vader =) This is just a new technology to protect the screen of your gadget!

How hydrogel film is glued?

The process is fast enough. First step. this is the gadget’s choice. On a special screen, you can choose your smartphone or smart watch from a large list. The device knows its exact dimensions and display dimensions. You also need to choose where you want to glue the film: on the front or back side of the gadget.

Next, you need to put a dummy film in the lower compartment, and the machine will start cutting out a “candy” from it. It takes literally a few minutes.

So, if you are from the category of people “mom, make me a snowball” and your smartphone often “flies”, then you have the opportunity to protect it from scratches. With a hydrogel film, the screen will not lose either brightness or image accuracy, but it will receive additional security =)

Can the heating cable or underfloor heating mat be shortened

Heating cables are designed for a certain area, even at the factory. They are not sold for a cut

But in some cases it happens that the coolant has already been purchased, and the area of ​​the room has decreased due to the addition of furniture (or other reasons), a problem arises, since the cable cannot be installed under closed places, which will lead to air blocking, and in the future it can lead to an exit the cable is out of order. Ideally, it would be nice to replace the section with a smaller area.

(information also applies to underfloor heating mat)

What to do if there is no such possibility?

You can simply raise the furniture by 1.5-3 cm by installing mini-legs (which are purchased separately, you can drill 1-3 holes in the cabinet by inserting plastic covers, all this is necessary for air circulation. This is the first way out of the situation.

You can also reduce the pitch of the wire, by reducing the distance between the turns within the limits specified by the manufacturer (usually up to 7 cm). After reducing the laying width, you need to fix the places on paper or take a picture in order to know the location of the cable under the screed in the future, this will simplify the determination of the location of the breakdown if this happens. It is also possible to lay part of the remaining wire in the combined room or even on the walls, or lay the rest of the cable around the perimeter of the room near the baseboard, but so that it does not overheat (i.e., cover with tile glue or concrete).

Well, is it still possible to cut the heating cable?

The cable can be reduced by 10% of its length, no more (in extreme cases). In order to shorten it, special tools and materials are needed, such as heat shrink sleeves, crimping sleeves, and a hair dryer. Cable termination points are considered the most unreliable in the system. Therefore, you should not do this work yourself. Since in case of improper coupling or termination of the wire, the coupling will have to be repaired again, and for this it is necessary to remove the topcoat. It is better to provide this robot to a specially trained specialist.

Remember heating cables and mats are very reliable as they are metal based. nichrome, but this metal is very unstable to bending. Be careful!

If this article was useful to you, do yourself a repost.

Is it possible to shorten the electric underfloor heating?

Answer: no (we do not recommend cutting the heating cable or heating mat). This warm floor does not come with a warranty.

Why? We will answer below.

• Infrared film: price 230 UAH / m2 (under carpet, laminate, carpet and other floor coverings)
• Warm floor for tiles from 630 UAH / set
• In a screed from 630 UAH per set.

Cables produced by factories have a fixed power and are designed for a certain area of ​​premises.

Is it possible to shorten the warm floor?

What to do if there is a lot of warm floor?

• Exchange for another model

• Coupling (not recommended by the manufacturer). If a situation arises when the cable is purchased, the terms of return and exchange have expired, the layout of the heating places has changed and requires a smaller area. There is an opinion that the cable can be shortened by no more than 10% of its length. It is best to entrust this operation to specialists, since the installation of an end sleeve will be required. High-quality coupling is made with special tools and materials. Couplings are a place of increased load, so it is very important to perform them correctly and accurately, the performance of the entire system depends on this. What manufacturers of underfloor heating tell us: any outside interference in the design of the heating section removes the warranty. You decide.

• Change the step of laying the warm floor or think about rearranging the furniture. It is much safer and more correct to leave the cable intact, revise the laying step according to the instructions. Install surplus in an adjacent room or along the walls along the baseboards. The main thing is to leave the cable the ability to give off heat evenly throughout its entire length. Furniture purchased after the installation of the system can always be lifted on decorative legs. The main thing is that the minimum distance from the floor to it is at least 2 cm. A sliding wardrobe installed on a warm field should be equipped with several ventilation holes.

Underfloor heating is a very convenient and comfortable purchase, there is never a lot of it. Careful installation ensures trouble-free operation for many years.

During installation, we recommend drawing up a photo plan of the system or fixing it on paper. This will be needed during redevelopment and during construction work.

Answers to frequently asked questions about Polymedel film

Often people think that if polymedal doesn’t stick to paper or body, then it doesn’t work! This is not true! Polymedal continues to act at the same time. The initial adhesion of the polymedal is due to a residual electrostatic charge, and upon contact with a person, this charge is quickly lost. The film has a magnetic charge, and the magnet does not stick, as you know. Not to the body, not to the paper! )))

Do I need to get the Polymedal out of the shipping envelope? The answer is yes! Necessarily, since this envelope contains synthetics (gloss), and as you know, synthetic materials are poorly permeable to a magnetic charge. We recommend using only natural materials. For example, a bandage for polymedal.

Can polymedal be crumpled? The answer is yes and no. Jamming of the polymedal is inevitable, but this does not mean that it does not work at the same time, it is just that the more the polymedal is dented, the more the magnetic charge is weakened! Place the polymedal between two kid’s craft cartons to help keep the film from wrinkling.

Can I take polymedal with my hands? Yes, you can, but we warn you that dirt can shield the magnetic field of the film and weaken the effect. If the polymedal is dirty, you can wipe it with rubbing alcohol.

How long does polymedal last? The manufacturer guarantees a shelf life of 5 years, but this does not mean that after 5 years the charge disappears, the period is due to the service life of the fluoroplastic itself. If the film has become cloudy and decreased in size by almost 2 times, then alas, it’s time for you to buy a new one.!

Can polymedal be cut? Yes, you can, for example, into two parts, but keep in mind the smaller the film, the less depth the charge penetrates! The depth of penetration of the whole film is about 14 cm.

If the film is folded in half, the effect will be twice as good! Answer No!

Can the film be applied to a naked body? Answer Yes! The polymer applicator for joints can be applied to the naked body and the effect will be better, but it must be borne in mind that this generates heat and the film becomes wet and “fatty”. after which it must be cleaned from time to time, which will negatively affect the service life.

Can I apply to different parts of the body at the same time? The answer is yes! You can and should! You can at least completely overlap, only in this case you will need more than one polymedal)))

Can Polymedal be applied by either side? Answer Yes!

What is the basis of the action of polymedal? The answer is a magnetic field, it has long been widely used in medicine around the world.

Can Polymedal be used over clothing? The answer is yes and no! If your clothes contain synthetics, then the polymedal field will not be able to penetrate. Synthetics contain a harmful positive charge, which not only does not allow the charge of polymedal to pass through, but also harms our body. We recommend that you wear clothes made from natural materials only. So on top you can’t, under clothes you can!

How many years has Polymedal been produced? The answer is over 20 years, since 1989.

How to apply polymedal correctly? The answer is simple, where it hurts, there and apply.

Should there be some sensation at the time of application? Answer: in principle not, but in some cases there is a feeling of warmth and tingling, due to the normalization of blood circulation.

Does Polymedal effectively relieve pain? The answer is yes! Podimedel effectively relieves pain. When using polymedal film, the analgesic effect is observed already at the first application, usually after a few minutes, but with some problems, the effect is achieved after a few days!

Does Polymedel relieve swelling and inflammation? Answer Yes! Polymedal restores the normal functioning of cells and blood vessels, due to this oxygen and nutrients enter the affected areas, tissues and cells, restorative processes begin and inflammation passes.

How effectively does polymedal heal? It has been clinically confirmed that the use of polymedal film helps to accelerate the healing processes of tissues after cuts and abrasions, almost twice.!

It turns out that polymedal has a positive effect on the entire body? The answer is yes! Since the magnetic field of the film contributes to the generation of healthy energy in cells, this is reflected throughout the body as a whole, namely, the transport of substances, reactions of synthesis of substances and an increase in the body’s defenses!

And for what diseases is polymedal most effective? The film is effective for the following frost diseases only: arthritis, bronchitis, osteochondrosis, neuritis, hepatosis, sinusitis, prostatitis and all diseases caused by vascular diseases.

Is it true that an exacerbation can occur with the first application? The answer is yes! During the first application, exacerbations are possible, if this happened, then do not be alarmed, but simply reduce the application time by about half. And then gradually increase the application time.

What are the contraindications to polymedal? There are few contraindications to polymedal, since the magnetic field is native to our body, because we live all our life in the magnetic field of our planet! But still there are contraindications, these are: neoplasms, areas of application where bleeding is possible (fresh wounds, stomach diseases at the stage of exacerbation) and rupture of blood vessels, and also apply with caution to the area of ​​the heart and thyroid gland!

Is there no time limit for using polymedal? In fact, it is not recommended to use Polymedal for more than 48 hours at a time! In fact, about an hour is enough for a therapeutic effect, but in advanced cases it may take up to 8 hours.

This Polymedel is produced only in St. Petersburg!

Introduced Cuttable Touch Film

Researchers from the University of Saarland and the MIT Media Lab have unveiled a new printable, touch-sensitive film that works even after being cut into another shape with scissors. The challenge that the researchers have set themselves is to enable people to use sensory control in a way that is convenient for them in everyday life. Researchers see the ability to cut with scissors as a user-friendly solution. What it feels like: A little patience and scissors, and you’ve got a star-shaped display?

The technology is currently being adapted to be applied in the electronics paradigm to create “cut-resistant” devices. The printed sensor film can be cut due to the wire structure. A simple inkjet printer can deposit conductive ink marks that will tie knots on the paper to a control center. A conventional wired structure would work well with touch, but any damage to the wiring would carry a wave of disturbance and damage the sensors. The new wired strategy assumes that each node will serve a different wire, so if you cut it, the big picture will not change. This means that users themselves will be able to determine the edges of the sensitivity of the sensor paper, without worrying about the quality of the technology as a whole. While the central unit is working, only 1/36 of the sheet can be damaged at a time.

According to ExtremeTech, scientists have presented several wiring circuits that fit different shapes. for example, an ordinary star would need a complex wire topology. Cutting options have their limitations, and an unwary user (a child, for example) can easily cut off unnecessary functionality. A certain redundancy in the wiring will help to avoid this, but you still have to plan a little future functionality based on the form. Anyway, the fewer wires, the better.

Scientists believe that their film can be glued to any object. from watches to tables. The last of the two seems more plausible because it is a flat surface with a simple shape that does not bend or move; at home, the “electric table” can get any source of energy. On the other hand, it is unlikely that we will see the film on the market this year, so it is highly likely that in three or four years its creators will add a “wireless charging” item. But the watch strap will have to tinker with.

It is also unclear what kind of connection the new touch interface will wear. Well, I carefully cut out the mold, glued it to the table, but how can I convert the gesture into a useful signal? Let’s say I want to hit the table and that would mean I checked in poker, would I need a sophisticated application to handle the signal? Easy integration with common operating systems would be a good start, but real creativity will be limited.

And here is another interesting technology for converting any surface into a sensory one. but based on vibration.

We cut and install protective materials on a smartphone. equipment and business with CUTUSE

Let’s take a look at the CUTUSE project as an example of how such a business can be arranged, what are the differences from the traditional sale of finished products, what are the pros and cons.

Always up-to-date range of models. solution from CUTUSE

Attempts to wrap a particular device with film have been made repeatedly, many perceived this as a competitive advantage. But in the end, all such pen tests turned out to be spoiled material, poor installation, short service life and complaints from end users. Using the device, this can be done, and this becomes a competitive advantage, since you have full 360-degree protection, and the installation is not very difficult. But the most important thing is not even this, but the fact that CUTUSE initially has a database of more than 6500 cuts for different mobile devices. And every day new models appear, that is, in fact, the use of equipment removes the need to keep a noticeable range of protective films at the point of sale. You can install the protective material on almost any model, this becomes an advantage. It doesn’t matter what kind of device and how quickly it appears on the market, you already have protection for it.

One of the phrases that I constantly heard that CUTUSE is not interesting is related to the fact that there is often a prejudice against films, as if they are worse than glass. This is, to put it mildly, a delusion, since films have their advantages. Let’s take a look at the materials that CUTUSE equipment works with:

• 3D Expert
• AntiCRASH
• 3D Expert Mat
• ClearCARBON.

All of these are new generation protective materials and are noticeably different from those films to which we are all accustomed. Suitable for curved 3D and 2.5D screens, work with ultrasonic sensors. It is important to note that all CUTUSE shielding materials are sourced from Korea, not China like most products on the market. The simplest and most popular material is 3D Expert (universal blanks of materials from which they are cut, 103×190 mm), it has the property of self-healing of the surface from small scratches self-healing, this process takes up to 24 hours, but you will notice the visible effect already within first hours. This material is distinguished by the fact that it does not have the orange peel effect of other popular films on the market. It also does not feel like rough rubber to the touch and has a premium quality oleophobic coating that makes it easier to clean the screen surface from fingerprints and other greasy stains and dust. High-quality Japanese glue allows you to easily and quickly stick the protective film and provide good adhesion to the surface of any screens. We can assume that 3D Expert is the basic level of protection.

AntiCRASH is a specialized shockproof protective material, more dense, while it can be installed on any 2.5D / 3D surface, that is, it is virtually any device. It is a CUTUSE material that can be installed 360 degrees when both the front and back surfaces plus the sides are closed. AntiCRASH perfectly protects the device from damage due to falls or impacts, absorbing and distributing impact energy over the entire surface. In addition, it has a premium oleophobic coating, high quality Japanese glue, and self-healing properties from minor scratches.

The following two materials: 3D Expert Mat and ClearCarbon are suitable for the back and sides of the device. Their density is higher, they better protect against scratches and impacts than others.

Also have an excellent oleophobic coating that prevents the formation of fingerprints, strong adhesion to any surface of the device, thanks to premium Japanese glue, self-healing properties from scratches.

The ClearCARBON material simulates a carbon fiber pattern. This is the original material that is used to cover car bodies during tuning. In CUTUSE, it is used on the back of the device, enlivening it, while being translucent. does not cover the manufacturer’s logo and does not hide the color of the case. But it plays beautifully in the light. The hardness of the film reaches up to 6H, which is quite good for such a material.

The most interesting thing is that all these protective materials are micro-perforated, which additionally minimizes installation errors. For example, if for some reason the seller has installed a protection with air bubbles, then you do not need to try for a long time to “drive them out”. they themselves will disappear within 24 hours.

As you can see, the materials differ in their properties, they can be installed in a completely different way than glass, and they can also be on the back of the device. In short, there is something to think about, but I would like to dwell on the installation process.

CUTUSE has made a simple and very reliable system when you cut film from templates. Here ordinary knives are used, their resource is not endless, but long (400-1000 cuts). The blade is such that it does not leave a sharp edge on the film, more precisely, it is a combination of material and a knife. The similarity with laser cutting is almost complete, and this is a big plus of this product.

Installation can be both “dry” and “wet” method. It depends on the type of material and type of cut, there is no difficulty in either the first or the second method, the differences are minimal.

For a point of sale, such accounting is a great opportunity to see which films were cut and installed, how much material was spent during the reporting period. This removes even the slightest opportunity for fraud on the part of the staff; it is impossible to deliver something past the checkout. Many retail chain owners have no idea how many installations of film and glass go past the checkout when sellers set up their little candle factory. Here this problem was solved initially.

Business model for CUTUSE, value for the end user

Plotters for cutting films appear every day, it is difficult to surprise them. Of course, the quality of such a machine, ease of use and the availability of high-quality consumables play a role. But beyond all this, it is extremely important how the business model is arranged and how the device is used.

Retail (screen). The diagonal of the device is from 4 to 6.5 inches. The CleanCarbon material will cost from 1,780 rubles for the back and side parts, it cannot be glued to the front surface, which is understandable.

The lack of purchases of an assortment of films reduces the risks of not selling them for the outlet. Virtually every installation brings in money, and there are no subsequent costs to write off unsold films in this scheme. All you need is a small space for the device, it is miniature.

For a retail outlet, the CUTUSE project is the absence of additional costs and risks, the ability to start serving customers literally right away. When the equipment is delivered, personnel training is carried out, it takes very little time, much less than attempts to teach employees to glue ordinary films, and the result is much better at the output.

What color is the hydrogel film?

Many are often misled by the yellow color of the transport films, between which the hydrogel film itself is placed directly. We emphasize that the hydrogel film is absolutely transparent. The color of the transport film does not in any way affect the color of the projector screen. You simply remove them during installation and discard them as unnecessary.

Advantages of hydrogel film

The hydrogel film differs from the previously widely used PET film for screen protection in the following improved characteristics:

• flexible and thinner. Hydrogel film is significantly more flexible than PET film, allowing it to wrap around even curved edges of smartphones. At the same time, it is thinner, which allows you to fully maintain the sensation of touching the screen, as well as without protection.
• High transparency. due to its smaller thickness, the hydrogel film has better optical characteristics.
• Self-adhesive. due to the modified structure, the film is easily glued to the smartphone screen. But a special difference between hydrogel films is the ability to independently remove air bubbles, which often occur when gluing films. Even if there are bubbles left after gluing, there is no need to do anything. Just leave your smartphone for 24-48 hours and they will disappear on their own!
• Extended service life. the use of a new polymer material made it possible to increase the service life of the film, because this material is less susceptible to drying out and the influence of ultraviolet radiation.
• Self-healing. the material from which the hydrogel film is made has a unique function to independently “tighten” scratches and abrasions. Unfortunately, we cannot say that this refers to serious cuts, tears and other violations of the integrity of the film structure, but small damage on the film will disappear on its own within 24 hours.
• No fingerprints. the surface of the hydrogel film collects handprints much less than PET film. There are no special means for caring for the film, it is enough just to periodically wipe it and this is enough.

What is a hydrogel film for a smartphone and how to stick it?

Despite the constant development of Gorilla Glass, smartphone screens are still fragile enough to need additional protection. Accordingly, manufacturers of smartphone accessories are also constantly looking for new materials that will make it easier and better to protect devices.

One of these new materials in use is the hydrogel film. In fact, this is a logical development of the previously well-known PET film, which was gradually replaced by protective glass. However, the ubiquitous fascination of smartphone manufacturers with 2.5D screens has brought films back to the market of protective accessories. At the same time, it was PET films that were no longer suitable for curved screens due to their rigidity. Accordingly, it was necessary to look for new solutions.

How to stick a hydrogel film on your phone screen?

The procedure for gluing a hydrogel film differs slightly from gluing a PET film:

• without removing the shipping films, attach the film to the smartphone screen and carefully try on all the cuts and slots.
• Wipe the phone screen with high quality with complete wipes (wet and then dry) and remove all dust from it using stickers (also included).
• In hydrogel films, the technical film covering the adhesive layer is divided into 2 unequal parts, so you need to:

• remove the smaller one first and fix the upper part of the film by smoothing.
• second, remove the main part of the protective film and smooth the hydrogel film over the remaining surface of the screen.

You can clearly see the whole gluing process in this

What are these main advantages of the hydrogel film:

• One of the main advantages of the hydrogel film for the phone is that the user’s fingerprints are not noticeable, as is the case on other materials, including protective glasses;

Despite the fact that the film can restore bends that remain after minor damage and scratches, often traces of them are still visible.

What is this hydrogel film on a smartphone

Every user wants to protect their smartphone from everyday possible damage. Therefore, he is thinking about the issue of screen protection. Over time, the types of cases and mobile devices, as well as their accessories, change. In this article, we will cover one of the types of protection in detail. You will find out what a hydrogel film is and what its advantages are.

• What is this hydrogel film for a smartphone?
• Varieties of flexible phone screen cover
• The main advantages of hydrogel films
• How to apply hydrogel protection to your phone
• Disadvantages of a hydrogel film for a smartphone screen
• Video instruction

How to apply hydrogel protection to your phone

Protection of this type is removed and glued quite simply: they made a mistake in the location of the film. they removed and pasted again. And although it is quite pleasant to the touch and at first glance, even somewhere “flimsy”, it is extremely difficult to remove the films from the phone and tear the films with your hands.

The set with the film should be supplied with absorbers and wipes for wiping the screen of your smartphone before the sticker.

The best place to stick the hydrogel film is the window sill in the apartment. If the time is late. use a lamp, in any case, the workplace should be fully illuminated. Because we have to see the surface of the screen, every speck of dust on it, in order to cope with it.

Use the supplied tissue and wipe the screen. If it is free of streaks, grease and other things (if you have just removed the temporary protection or other film), you can proceed to the hydrogel film sticker.

Procedure:

• On the film, you can find a tab with which you can peel it off;

It’s not scary if you did all the work correctly, but the bubbles still remain. as already mentioned, they will disappear in a few hours. Especially when it comes to small air vents. This is also its advantage.

What is this hydrogel film for a smartphone?

At the same time, monopolists always set maximum for their products. This is their main mistake, since resourceful competitors offer analogues at lower and with great advantages. In a situation with the protection of phone screens, it is quite possible that such an analogue was found. It is a hydrogel film.

Despite some misconceptions and rumors that the hydrogel film is even the best protection for the phone, this is not the case. The material is rather a kind of silicone with impurities or additives of other chemical compounds. Due to this similarity, it is very flexible and elastic. If we take it in our hands, we will feel a soft material that barely clings to the skin of our fingers. She will be able to protect the screen from minor damage, scratches. But the film will not withstand serious collisions with solid objects.

The touch screens of phones are constantly in contact with the user’s fingers. Sometimes we swipe across the screen and touch it with our fingernails. This means that the material is flexible and soft enough, there will be furrows on it.

Traces on the hydrogel film for the phone can be from any touches of tougher objects: locks of handbags or jackets, house (car) keys, key chains and others. Marks remain even after you try to smooth out the airy areas that form when the film is applied to the screen.

Varieties of flexible phone screen cover

This type of film is quite popular today. It is often bundled with mobile devices by the popular Xiaomi brand and other Chinese manufacturers. They are different in shape and purpose.

They can be sold as a means of protecting only the screen area or as a cover, covering almost the entire phone, sometimes except for the screen. These hydrogel cases are created in the shape of a phone armor. Only areas with buttons or holes for accessing the connector or sound output can be open.

The hydrogel itself is a transparent material that is completely non-toxic to humans, which is one of its main advantages.

It has a number of properties that have been used as covers and films for screens: regeneration of dents, transfer of a natural image, flexibility. When comparing films made from other materials, you can find many advantages that will be significant. I hope you understand what a hydrogel film is and let’s pay attention to its benefits.

The main advantages of hydrogel films

Different chemical compounds are used for the protective films of mobile phones. Manufacturers are constantly experimenting not only with the composition, but also with the form, type of protection, etc. Hydrogel protection is more common on screens because they fully reproduce the brightness of the screen colors, without distortion or clouding. And despite the fact that when in contact with hard and sharp objects they are deformed. they can quickly restore their previous shape.

Due to the flexible and movable structure of the hydrogel material, the protection on the screen does not require any modifications during application. That is, when you glue the film, bubbles appear. Unfortunately, this is indispensable. But over time, they can come out on their own, if you did everything correctly in the process: remove dust from the surface, wipe the surface of the screen with alcohol or anti-grease agents, etc. Usually, it is enough to leave the smartphone for 24 hours or use it to a minimum (only answering calls).

Disadvantages of a hydrogel film for a smartphone screen

If we talk about maximum protection, then hydrogels are inferior to protective glasses, which can really “take a hit” in the most extreme conditions. And the choice of the user can be correct if the owner of the smartphone correctly evaluates his activities. If you are an office worker, this protection is enough to protect your mobile phone screen from falls. For builders, athletes, “party-goers” (more active lifestyle). the choice should be towards maximum protection.