Installation of a disk on a Husqvarna lawn mower. Service

Installation of the Husqvarna Automower /H2> lawn mower

Illeon-Stroy company is engaged in wholesale and retail sales of Husqvarna Automower’s lawn mowers and also produces professional installation and configuration of the system. Warranty for the work performed is 1 year.

It is possible to install and purchase Husqvarna Automower lawns-robots in an interest-free installment plan. Installment amount from 10,000 to 300,000 repayment period to 2 years.

The cost of any Husqvarna Automower lawn-mowing robot includes free installation of the base kit. The free installation of the base kit includes: installing the charger, connecting the charger to a 220V outlet with a laying of the supply cable via soil, laying from 150 to 600m (depending on the model) of restrictive and guide wires for the soil, setting up and testing equipment!

Advantages of the Husqvarna Automower lawnap

It is not required to remember the haircut of the lawn, the lawn mower does everything herself.

Time saving, No need to spend time on a lawn haircut.

The ability to travel on vacation without harming the garden

Aesthetics of the garden. The garden is always green and perfectly trimmed.

The ideal result of the mowing. The arbitrary order of the Husqvarna Automower lawn mower guarantees the perfect quality of the haircut of the grass, as a result of which the lawn becomes like a beautiful green carpet. Sharp, like razor blades, knives carefully cut the grass from all sides, helping it grow strong and healthy. Such a haircut system also effectively prevents the appearance of moss on the lawn.

Noiselessness. Thanks to the unique cutting system, the Automower lawn mower-robot works amazingly quiet and only when you want it.

Automatic charging. When the Husqvarna Automower lawnapon requires recharging, she independently finds the road to the charging station.

Lack of harmful emissions. Automower’s lawn mower is driven by electricity and does not produce harmful emissions.

Moisture resistance and resistance to climatic factors. Can work even under heavy rain.

Lifting and inclination sensors. Automatic shutdown of cutting knives when lifting or overturning the lawn mower.

Protection against theft. Turning on the alarm if the PIN code is not introduced within 10 seconds after pressing the Stop button or raising the lawn mower. The blocking system using the PIN code, the lawn mower cannot be used without entering the PIN code.

Reliability. Robot lawn mower is characterized by a high level of reliability and strength.

Prestige and increase in the cost of a house, a personal plot.

Selection and calculation of the Husqvarna Automower lawn mower

For self-installation of the Husqvarna Automower robot, you need to carefully study the operating instructions for the model you have chosen in the Husqvarna Automower Lawn Model. This section presents all Husqvarna Automower models as well as their characteristics and features.

If you need to make a professional installation, then our company will do it quickly and efficiently. We put the base set for free!

What needs to be done so that our company can make a professional calculation and selection of equipment:

Draw a plan of your garden site on millimeter paper in a 1cm = 1m or 1 cm = 2m scale. On the plan of the site, it is necessary to indicate the place of the power source of 220V, mark the areas that need to be trimmed, and also indicate all the obstacles (bushes, beds, buildings, flower beds, etc.P.). If there are slopes on your site, then it is necessary to measure the height difference by 1 m and indicate them on the plan. If the site has a native area of ​​less than 2 meters wide, then be sure to indicate them on the plan.

You can also draw a site using a special drawing program Gardena. To save the site in the Gardena program, you must register. Next, provide us with a login and password for calculation.

If you drew a detailed plan of the site in the Gardena program indicating the narrow sections of the mowing, all buildings, trees, bushes, etc.P., then an additional discount on equipment 3,000 is provided.

Please note that the Gardena program is only suitable for drawing a site. We calculate and the selection of equipment in a special program developed by Illeon-Stroy specialists.

Our specialist can go to your site, for measurements and selection of a gazonocosille robot. The cost of departure and removal of measurements:

We recommend that to save your money and our time draw a plan on our own.

For the selection of equipment and calculating the estimate of the installation, the mandatory execution of. 1 or 2. Without the exact plan of the site, indicating the place of power source, obstacles (bushes, beds, buildings, flower beds, etc.P.), height drops in the native zone, narrow sections of a native of less than 2 m wide. The calculation is not made! According to approximate data. The calculation will not be correct!

Examples of installation of Husqvarna Automower lawnshot

Garden section 18 x 35 m with a mowing area of ​​500 m2. The maximum height drop for a 1m mowing zone. less than 25cm. There are no narrow plots. Distance from the power source to the charging station less than 10m. For this site, the Husqvarna Automower 105 lawn mower is optimally suitable. 1 guide wire for connecting to a charger.

How to install a disc on a trimmer for Husqvarna grass

Knives for motorcycles. An indispensable thing. It is enough to choose the right thing, and with their help you can mow huge sections of the grass. Of course, the variety of knives somewhat complicates the task of their choice. To understand which cutting element is necessary, you need to familiarize yourself with the main. You should also learn in advance about the proper sharpening and work of knives.

Review of species

For knives, special knives should be used. They allow you to mow higher and hard grass than a fishing line for a trimmer of hair growth. It is also suitable for cutting young shrubs.

There are many types of disks that differ along the cutting edge, shape and material from which they are made.

For cutting edges

  • With two teeth. for young soft grass, lawns;
  • With three teeth. for young grass, dry, weeds;
  • With four teeth. for solid grass and young shoots of trees;
  • with eight teeth, mow grass without a strong haircut;
  • With 24 teeth. for hard and dry grass, shrubs, thin trees;
  • with 40 or more teeth. for mowing any grass, shrubs, trees;
  • from the 80s or more. For professional motorcycles.
  • with two. for soft and low pigtails;
  • With three. for mowing weeds;
  • with four or more. For mowing grass on the hay.


Disk knives blades and several blades stand out in the form. The shape of the blades can also change. It should be noted that this does not affect the speed or quality of the motorcycle work.

Currently, manufacturers began to offer, in addition to traditional forms, triangular, rectangular and trapezoidal forms.

Based on materials

The brush disk can be made of metal or plastic. It should be clarified that for electric braids it is preferable to use plastic blades. They are great for the curved plank of this tool, which does not very distinguish the working area and legs for mowing. Plastic knives are good for mowing dry grass, for example, nettles or burdock trunks.

Metal knives are suitable only for gas trimmers. This is due to the flat bar that pushes the disk from a safe distance. Special handles also contribute to security. When hitting a hard object, part of the impact is extinguished with an engine coupling. Iron knives are suitable for mowing grass from large areas, weeds, shrubs, young trees.

Review of manufacturers

There are a huge number of disks for motorcycles. It is worth getting to know the most popular. Example, Bosch brand is known for its two and three knives. The peculiarity of the knives of this company is that each of the blades can be replaced separately from the others.

Another company known for its blades. Shark. The advantage of the design is that the blades are fixed relative to each other at an angle of 120 degrees. As a result, it is easy to adjust each of the blades, which is convenient for different vegetation. Another feature of the knives of this manufacturer. Light weight.

Husqvarna is also known for its multi.tooth blades., Especially hayfields. Ideal for thick and thick grass. Of the shortcomings, it is worth noting the large weight of the disks and the fact that the knife cannot be turned if one of its sides is pointed out.

Scissors with force cope well with undergrowth and branches. In practice, the metal from which the cutting elements are made is very durable. The only thing that in some models the winning taps are very quickly erased.

Discs are equally well suited for different types of grass, as well as for shrubs and trees.

Spare wheels perfectly mow grass, weeds, branches. Teeth even withstand the cutting of trees with a thickness of 6 cm or more. However, they have a shortage of twisting grass on the shaft.

Patriot produces high.quality knives. Users note that the choice of a suitable disk for a specific work will take a lot of time and amaze you with its work. It is very easy to chop the knives from this manufacturer on your own.

How to choose?

When choosing a knife for a mower, you should pay attention to many points. For example, discs with metal teeth are often made in the form of a circle. Teeth can differ in shape, appearance, size. For small trees, as well as for thick herbs, it is better to use discs with a large number of teeth.

It is worth noting the advantage of milling circles for motorcycle, as a fast speed. Nevertheless, a high moment of inertia is not best affected by the block drive. For tight mowing, for high, as well as for small coarse herbs and shrubs, it is best to choose circles with 40 or more teeth and peoration. They are not able to destroy vegetation, and it will practically not wrap around the circle. If the number of teeth exceeds 60, then you can safely mow grass and trees with a barrel thickness of 7 cm.

Disks with a solid blade and without holes have a large weight, so they should be chosen for powerful trimmers (more than 40 cm3). It is also convenient to mow rare grass and dry; They are also suitable for mowing with different density.

Victory discs should be selected for mowing plants near obstacles. If you need to mow grass on the hay, prefer steel knives with a lot of softly sharpened teeth. Solid discs with the number of teeth from 16 to 32, well.cut plants with thick stems.

For low.power trimmers, blades with a minimum torque are better suited. The smaller the blade, the stronger the tool will grind the grass. Yes, discs with two blades are most often used to cut homogeneous grass. The main advantage of this species is that it discards cut plants to the side.

How to put a cutting disc on a trimmer for Husqvarna grass

The first trimmers for grass appeared in the USA in the early 1970s and had the lower location of the power plant. Despite the high efficiency, such a layout imposed many restrictions on a safe mowing in a wet lawn. It also turned out to be impractical to increase power due to the installation of more severe modifications of engines, which critically violate the optimal tooling of the tool. That is why most modern manual travo.shirts have a spaced structure, which consists of:

  • a hollow rod from a durable alloy with a wear.resistant shaft inside;
  • motor unit in the upper part;
  • durable cast reducer;
  • cutting headset with a protective casing on the lower end of the bar.

Some of the models have a control control and front loop handle built into the bar, which provides comfortable retention and high maneuverability of the unit. A diagram with an asymmetric shape, which can be installed on an additional vertical stand for convenient mowing on the slopes is also often used, is often used with a universal bike handle. To reduce the load on the operator, an effective anti.vibration system is provided. Special belt equipment improves balancing and evenly distributes the weight of the tool throughout the body.

Battering trimmers for grass have a classic layout with a lower engine location. The manufacturer uses a BLDC branded electric motor without brushes, which is characterized by compact dimensions and hermetic metal corps. In the upper part of the rod, the compartment is placed for the lithium-ion battery of 36V and a well-visualized control panel with LED indication and buttons of turning on/off, activation of economy-mode Save, selection of the direction of the mowing (against or clockwise).

Model designation

The manufacturer “Husqvarna” uses a clear division of proprietary mowing products into unprofessional and professional. This characteristic determines the resistance of the tool for wear and the final service life. With the right operating mode, a travo.canine can effectively work out 10 years or more. If household modification is used to solve commercial purposes, the resource laid down by the manufacturer may run out after 1-2 years.

Which knife for a trimmer for grass is better to choose? Review of possible options

Manufacturers produce several varieties of cutting elements for motorcycle. It all depends on the type of device. It is customary to distinguish between consumables:

What material for a trimmer knife is better

The purpose of the consumable determines the material: iron or plastic. The choice of one or another option is determined by several factors:

Important: metal mills are never installed on network braids. The power of the device is not enough for a full torque. Therefore, he appeared an alternative. plastic. Features of the design of the electric format motokos simply do not allow metal knives to work adequately:

Plastic blades are used only on devices with flexible hoses. Plastic copes with fine grass, dry areas and burdocks. If the wrong disk was accidentally installed, look further: how to change the disk to the reel on the trimmer.

Metal cutters. It is used for mowing thick, dense grass, small trees. The properties of a disc trimmer for grass allow you to install it in the fight against shrubs.

Technical and external characteristics that indicate that you need exactly an iron tip:

  • straight bar, respectively. the length of the device itself increases;
  • comfortable handles for control of a scythe;
  • Setting a smooth turnover of the blade.

Tip: for mowing a large territory with different types of grass and shrubs, gasoline units are well suited. They need to install a metal disk with sharp knives on them.

How many blades should be

The form does not affect the efficiency of the blade as their total number. For example, for the future hay it is worth taking a mill for 6-8 blades. With an amount of 2-4, the grass is mowing “into the meat”, and you will not fall any drows. For young trees, blades with many small teeth are great (look in stores with winning elements. also a great option).

Labric mushroom knives are Natural in different ways: on one or both sides. Dumb or spent option increases fuel consumption and works inefficiently.

Important: try not to work with blades in areas with stones, brick. The only hit of the blade on the solid edge can break it can break it. Worse, if part of the pebble flies away in your direction. Be carefull!

How to change the nozzle for a trimmer for grass? The element should be selected on the basis of dimensions, material and design. Also focus on the format of work and the area that you will mow. The instructions from the tool will help you partially. Manufacturers indicate which knife what territory your equipment will process. Well, we go to how to put a knife on a trimmer for grass correctly.

How to change a disk on a gasoline trimmer

Set a new one or replace the nozzle on a motorcycle will not be inconvenience. A pin is always in the kit with the tool, which need to block the gearbox hole. We need it, so that the blade does not spin and we could unscrew the mounts under our nozzle. The main thing is to adhere to safety precautions. It is forbidden to change the nozzles on the tool on!

How to put a disk instead of fishing line or a new blade on a trimmer for grass:

  • Remove the plastic casing.
  • Block the pin hole in the pin. It is necessary to simultaneously hook the gearbox and a cup of the shaft. If everything worked out, we move on.
  • Unscrew the rogue through the mounting nut (clockwise). If the trimmer for grass is used for the first time, then the antipsychot is unscrewed along with the structure. He is there.
  • Install the knife so that its hole coincides with the center.
  • We fasten the boot back.
  • Without removing the pinstore, we tighten the nut (in the opposite direction).
  • Tighten the nut by any key. The stronger the better.
  • Put a protective casing.

To change the disk for a trimmer’s fishing line on a gas station, a similar procedure is carried out. Only instead of a nut you unscrew the spool. And at the last stages you return the nut and the boot.

Now you know how to put a knife on a trimmer for grass instead of a fishing line, or install a completely new nozzle. Share in the Комментарии и мнения владельцев what knives you use and how effective they are in the fight against weeds. See you in the following articles!

How to install a grass collector for Husqvarna LS 140

This lawn mower was released relatively recently. Husqvarna LS 140 has a simple design and is able to process lawns with a total area of ​​up to 700 m2.

The width of one capture is 40 cm. Husqvarna LC 140S supports work in two modes: collects grass in a special bag or throws it back.

The BriggSstratton 450E engine is installed on this lawn mower, which has a low noise level and a long service life.

Additional functions provides for adjustment of the height of the grass and installation of wheels on bearings.

The rear tires have a large diameter, which increases the clutch with the surface and improves the maneuverability of the machine.

Basic equipment

The factory equipment of the Husqvarna 140S mower includes:

  • user’s manual
  • The device itself
  • Collection of grass
  • A set of tools for servicing and repairing minor faults Husqvarna 128r

How to prepare a Husqvarna mitch for mulching

Husqvarna lawn mowers Husqvarna self.propelled lawn mowers with several modes.

Overview of gasoline gas mowers Husqvarna

The height of the grass braid is regulated by a lever located on the rear wheel, and has 10 provisions.

The handle has an additional rubberized finish, which improves work with the machine and prevents its sliding from the hand. During transportation and preservation, the handle easily folds.

The height of the steering wheel can be adjusted to a certain growth of the operator with a special relay.

Application opportunities

Before each start of work, the Husqvarna 140S lawnies must be convinced of the tool and the presence of a fuel mixture.

During grass formation, you need to be careful, as the knives rotate at high speed, and there is a high probability of flying stones and other solid objects from them.

installation, disk, husqvarna, lawn


Husqvarna 140 S self.propelled lawn mower does not work on pure fuel, but on the mixture. To prepare it, it is necessary to use gasoline and corporate oil from the manufacturer.

It was specially designed for garden instruments and helps to prevent the formation of deposits on the pistons, which significantly increases the life of.

Oil and gasoline should be mixed in a ratio of 1:50.

installation, disk, husqvarna, lawn

User’s manual

Before starting operation, new owners should familiarize themselves with the operating instructions that will help to understand the principle of the mowing, starting and safe work.

The electronic version of the user management is given here.

Advantages and disadvantages

The Husqvarna LC 140S self-propelled mower is in demand due to the fact that it can maintain the average territory in order, it does not depend on existing sources, compact, easy to operate and has a low noise level.

Reviews of the owners

Below are several opinions from thematic forums about the work of the Husqvarna 140s gasoline lawn mower:

“The quality of technology is immediately felt. Clearly goes, begins smoothly, there is no jerk from a place. The design is perfect. Management is so simple that even my wife copes with this. “,

The first gasoline gas mowers Husqvarna with a small haircut width (40 cm). LC 140 and LC 140S

In 2016, the assortment of Husqvarna first appeared gasoline lawn mowers with a small haircut width (40 cm). LC 140 and LC 140S.

Husqvarna LC 140 | LC 140S gas.resistant rotational gas mowers

    Engine: Briggsstratton 450e-Series; OHV; 125 cm³; manual launch

  • Power (nominal): 1.8 kW (2.5 l. With.) at 3000 rpm
  • Fuel tank capacity: 0.8 liters
  • Decy material: steel
  • Operating modes: rear emission; Collection on the grass collector
  • Nortizer width: 40 cm
  • Height adjustment: centralized; 25–75 mm; 10 steps
  • Windows diameter: front. 152.4 mm; rear. 203.2 mm
  • Grass collector: combined; 50 l
  • Drive: no | On the rear wheels
  • Weight: 24.0 | 26.5 kg

The peculiarity of these models is a very small nobility width. Previously, Husqvarna did not have such. And in general it “so” that almost all gasoline mowers have a working width from 43 to 53 cm. Of course, it is possible to find models with a larger or smaller width of the haircut, but they are found infrequently, far from all manufacturers. over, if “wide” models usually have a high level of performance and are positioned as intended for professional work, then “narrow” widths about 40 cm are most often very simple in design. The novelties of Husqvarna cannot be attributed to “simple”, this brand is for demanding private users.

The “upper” (OHV) Briggsstratton 450e-Series gasoline engine with a working volume of 125 cm3 is installed on mowers. In the lineup of Briggsstratton engines, this is the lightest variety, but the small size, as in the case of mowers, does not affect the level of execution. The engine refers to the modern “ecological” series, this is evidenced by a round green sticker on the case. The advanced version of the engine consumes less oil (the crankcase capacity is 0.47 liters, earlier modifications required 0.6 l). For the convenience of the first launch, the motor is equipped with a pumping pump. a primer, an air filter. reusable, foam rubber.

The “smallest” in the line of Briggsstratton “lawn-cocked” engine 450e-Series is characterized by a low level of emissions, vibration and noise, equipped with a foam air filter and a primer on the Husqvarna 140s lawn mower there is a wheel drive. This is a rather complex design, including belt transmission, gearbox and a number of parts and elements. There is no drive on Husqvarna 140, it belongs to the “pushed”

New items are offered in two varieties: Husqvarna LC 140. “pushed”, that is, without a drive. Husqvarna 140s is equipped with a drive to the rear wheels, t. e. self.propelled. There are no other differences between them, but this is quite significant: the drive consists of many elements. It includes an additional bar on the handle, the cable of the drive itself, the belt transmission from the engine shaft to the gearbox, the gearbox itself with the axis and gears to transmit torque to the wheels. In a word, the presence of a wheel drive seriously complicates and increases the cost of the structure. But for small lawn mowers, which are often used in limited territories, the drive is not required, it is more convenient in large open spaces. So choose here based on the features of the processed area.

Note that in the development of the design of the handles, the designers of Husqvarna showed enviable ingenuity. For mowers previously offered on the market, to start work (moving the brake rods and the inclusion of the drive to themselves), both hands were required. On the new Husqvarna lawners, all manipulations can be carried out with one (any) hand, which greatly simplifies operation.

Deco with mowers. steel, stamped, with a special coating that protects against corrosion. Additional stiffness is given to her by two welded semicircular jumpers. The handle is adjustable in height in two positions, easily folds “accordion”.

The ten.position lever of adjusting the height of the mowing is located at the right rear wheel. When moving it, the height of the installation of all wheels changes. Wheels, as always in Husqvarna, are installed on two.row bearings longitudinal thrust of the height adjustment mechanism. The angle of inclination of the control handle is regulated, it can be installed in one of the two provisions, the handle itself is folded in half. “Red button” on the engine. primer

The number of steps of height adjustment pays attention. Typically, manufacturers offer six to seven. Here. as much as 10. over, adjustment, as it should be on a “not simple” mower, is centralized, with one handle.

The rod of the engine brake. with a plastic semicircular lining, the handle itself. with a soft coating. To distinguish a mower with a drive and without it is easy in the rods attached to the handle. the models with the drive two of them

For ease of operation, the engine brake bar is equipped with a semicircular plastic lining.

Husqvarna Group is the world’s largest manufacturer for forest, park and garden: chainsaws, travo.mushrooms, lawn mowers, garden tractors, snow disclosures.

Husqvarna is 327 years of innovation and premium quality!

High technologies, strong corporate spirit and the desire to create high.quality tools helped the company to make the path from the production of weapons to sewing machines, stoves, motorcycles and, finally, landscaping technique. Constantly expanding technological boundaries, Husqvarna today remains the leader in engineering thought. Husqvarna tools are used in the forest-park industry around the world, allowing amateur gardeners and professionals to achieve the highest results.

Husqvarna Group products can be purchased in more than 100 countries. The company’s representative offices are located in 40 countries, and the staff of employees has 13,000 people. In 2015, the company’s turnover amounted to 36 billion Swedish crowns.

Since 2007, a member of the Husqvarna group and one of its main global consumer brands is Gardena.

The review was published in the United issue “Spring 2016” of Gardentools magazines “Tools” “Everything for Construction and Repair” of the Consumer series

Installation of a knife on a trimmer for grass. video

We suggest you familiarize yourself with a video instruction on replacing a knife with a Stihl gasoline trimmer. We remind you that the stages of installation may vary slightly depending on the model. Therefore, do not forget to look in the instructions!

If the disk on the trimmer is used regularly, it needs to be removed from time to time to remove and sharpen or change it to a new. This part can be made of metal or plastic, have a different number of blades, but the replacement process remains the same. over, this procedure is similar to the equipment of different manufacturers, whether Carver or Huter, but minor differences are possible. Changing the knife on the trimmer is quite simple if you observe safety precautions and know the correct procedure for which you can find a description of which you can in the user’s instructions. The whole process of replacing step by step, as well as the way of independent sharpening of knives, will be described in this material.

When the use of knives is relevant

When using motorcycles in summer cottages, the most popular nozzle is a fishing line for a trimmer. It has a small price, suitable for different trimmer heads, is safe when working. The minus of the application of the fishing line is that it is convenient only for the bevel of low shoots. In other situations, the string is immediately clogged, regardless of whether the gasoline or electric model of the trimmer for grass is used. In addition, vegetation is wound on a spindle, which creates significant resistance on the shaft and leads to its breakdown. It can also provoke a failure of the piston system in benzocos or burning out the motor in electrimmers.

Therefore, for mowing high or hard vegetation, various nozzles are used. So, for harvesting tall and rough grass, thin shoots of trees and shrubs to install and use it better. This nozzle clogs much less often, which contributes to the greater wear resistance of technology.

On a note! Due to the fact that the engine of electrical and battery models is less powerful than on benzocos, so the use of discs is more relevant for gasoline braids.

Husqvarna official service center on Nagatinskaya. Repair of construction equipment and equipment for forest and garden. Sale of original spare parts.

From 14.01.2022 to 31.03.2022. A promotion is held for the repair of garden and construction equipment Husqvarna. Discounts for spare parts and work up to 25%!

Illeon-Construction is an official dealer and service center of Husqvarna. Any tool requires timely care and maintenance to receive maximum performance and reliability throughout the entire service life. Our highly qualified specialists are ready to take on these worries related to service, warranty and post.warranty repair of equipment of brands included in the Husqvarna group such as: Husqvarna, Husqvarna Construction, Partner, Gardena, Flymo.

Diagnostics for free from 10 minutes!

Our service center has all the necessary equipment for the professional repair and diagnosis of tools, as well as certified and experienced craftsmen. We use only original spare parts in our work. Each part of the Husqvarna equipment undergoes strict quality control on modern equipment, and is also tested for optimal interaction with all other details. This approach allows you to get exceptional high reliability, efficiency and excellent working characteristics of any Husqvarna technique.

Illeon-Stroy service center is carried out by any complex repair of equipment for forest and garden. We carry out the maintenance and repair of riders, tractors, chainsaws, lawn mowers, snow discontractors, cultivators, trimmers, benzos and other equipment.

We draw your attention to the fact that the Illeon-Stroy service center is engaged in the maintenance and repair of the entire Husqvarna professional construction equipment: gas tanks, hydraulic tanks, carriers with electric drive, drilling machines, hydraulic stations, tile cutters, stenore vehicles, slotting marshes, industrial blasted vehicles and grinding machines concrete. The process of the process and the complicated repair is engaged in a service engineer from Husqvarna itself, who has undergone special training and having a Swedish diploma of a specialist

For all the work and replaced spare parts, a guarantee of our service center is provided.

If you want to make simple repairs yourself, then in our company you can purchase any original spare parts of Husqvarna.

The cost of work and spare parts includes VAT. An agreement is concluded for the repair

Opening hours of the Husqvarna Service Center on Nagatinskaya:

Review of Husqvarna lawn mowers, assistance in choosing a lawn mower

A neat and uniform mowing of grass is one of the most complex and laborious processes when caring for a personal plot, garden, and commercial object. To facilitate your work and make a regular procedure simple and fast. buy a Husqvarna lawn mower at a profitable price without intermediary. To do this, it is enough to contact the official dealer of the Swedish brand in which, in addition to an attractive cost, offers a long.term guarantee, high.quality service, prompt delivery of consumables and spare parts.

At the first stage of resolving the issue of how to choose a Husqvarna lawn mower, you need to decide on its type:

It is important to pay attention to the ability of the unit to move around the site without additional physical efforts of the operator. Husqvarna self.propelled lawn mowers with a drive to the front or rear axle have such capabilities (they have a “s” symbol in the name). The manufacturer also offers all.wheel drive models of increased ability, which are marked by the letters “AWD”.

How to change oil on a Husqvarna lawn mower YTH

Width and height of the nobility

Husqvarna is trying to give its garden technology maximum compactness for better handling, higher maneuverability, ease of storage and transportation. The overall width of the lawn mower coincides with the size of the working area (fixed knife capture width). Depending on the specific model and the series, this indicator is:

The height of the haircut settings is usually implemented through a practical scheme of centralized adjustment of the position of the wheels using a multi-position lever on the housing (5-10 provisions). The average value of the spinning level interval varies from 25 to 75 mm. At the same time, there are models that can cut the grass even lower (from 20 mm) or much higher (108-120 mm).

Separately, mechanical lawn mowers should be considered, which are less variable in terms of the number of cuts of the cut, but are able to “shave out” the lawn to a height of 12-13 mm.

Types of haircuts

Standardly Husqvarna lawn mowers are able to throw mowed grass back or to the side. Many models have a mulching option (BioClip technology) and a grass collector (letters “LC” in the name). In the absence of an assembly container, LB marking is used.

The manufacturer also provided for the possibility of hiring units with special accessories, which allow you to change the operating mode of the cutting deck in order to finely grind the grass for fertilizers for fertilizers. Manual models can be understaffed by a suspended grass collector.

Wheel formula

Husqvarna mechanical lawn mowers are equipped with two large wheels, between which the cutting headset is located. Electric, gasoline and battery units have a 4-wheeled layout that provides optimal stability in even areas, complex relief, rise and descent.

In this case, the scheme is used with equal size wheels (maximum exchange rate) and enlarged rear tires (improved maneuverability). In terms of controllability, the leader is the DBS 51 model with small fumeling wheels of the piano type, which is effective due to the reinforced knife not only with the haircut of soft and thick grass, but even the hard shoots and shrubs.

Cutting deck

The key element of Husqvarna’s lawn mowers is a cutting headset in the form of a large casing with sides around the perimeter (deck), which is located below the power unit, is completely open towards the earth and is a protective element for a rotating knife. The presence of special technical holes determines the possibility of mulching or haircuts in the grass collector by installing additional accessories.

Husqvarna Lawn Mower Repair. Replacing the Left Wheel Adjuster (Husqvarna Part # 532438485)

Regardless of the model, stamped or cast, deck is not subject to rusting and chips. The main materials are:

Some modifications, such as LC 356V, are equipped with a decree with a fitting under a watering hose for quick and high.quality cleaning after work. Husqvarna mechanical lawn mowers do not have a separate deck, but are supplemented by a cylindrical block of knives, which is fixed on the wheel axis and protected from above by the unit housing.

Work resource

Most Husqvarna lawn mowers are designed for regular maintenance of small and medium.sized in the area of ​​herbal sites. Such units have a good ratio of power and weight, high assembly quality, ease of operation. The daily limit of continuous work is several hours. With more active use, accelerated wear of components, drives and systems occurs.

Models with the prefix “Profi” (professional) are focused on large areas and commercial use. They can be operated without a problem throughout the work shift (6-8 hours). Characterized by increased performance, significant width of processing and a richer set of functions. To freely navigate in the categories (classes) of Husqvarna lawn mowers, it is enough to understand the value of the first digit in the name of the model, which is indicated after the letters LC or LB:

  • “1”. for private use;
  • “2”. private and irregular commercial;
  • “3”. commercial and private;
  • “4”. commercial and professional;
  • “5”. professional and commercial.

Ergonomic handle with adjustment and folding options

Husqvarna lawn mowers are equipped with convenient T-shaped (mechanical) and P-shaped (all others) handles with soft holders. The presence of an adjustment option in height allows you to configure the handle for a specific growth of the operator.

If necessary, the handle is removed or folded with a slope forward for the practicality of transportation and storage. Advanced models of gasoline lawn mowers Husqvarna (LB 448S, LB 553SE) have multifunctional pens with tuning heights and tilt to the side.

Mechanical lawn mowers

Designed for small lawns and even areas. Do not require gasoline and electricity for the work. They differ in budget price, low weight, maneuverability, low noise and the possibility of use. Have a very simple design, which consists of:

  • cutting node. a drum (cylinder) with long spiral blades made of hardened steel;
  • two strong wheels with a directed tread;
  • haircut height regulators:
  • a removable-dismantling control handle in the form of the letter “T” or loops;
  • protective steel building;
  • Puppy knife.

The cutting block is installed on the wheel axis and rotates due to the physical efforts of the operator (pushing). Grass cutting is carried out according to the principle of scissors at the time of passing the blade close to the clamping knife. The maximum mowing efficiency is achieved at the speed of the user’s movement of 4-5 km/h. information for choosing a mechanical lawn mower of Husqvarna See in the table below.

Characteristic/option 54 Exclusive 540 Novolette 64 Novo Cut
The principle of work/movement pushing pushing pushing
Weight, kg 8.6 9.1 8.7
Processing width, cm 40 40 40
Haircut height, mm 13-38 13-38 12-55
Number of haircut height positions four four Stained
Smooth change of haircut height Not Not Yes
Super.resistant cutting knives Yes Yes Yes
The ability to install a grass collector Yes Yes Yes
Wheel diameter, mm 203 203 203
Type of handle T-shaped with two soft holders Loop.shaped with soft coating T-shaped with two soft holders
Precision bearings of the wheels (closed on both sides) Not Yes Not
Shock.resistant polymer discs Yes Yes Yes
Non.filmed (silent) cutting headset Not Yes Not

How to make repair of the lawn mower with your own hands?

Those who have land are very familiar with what struggle is weed.

Especially when it often rains and the grass grows not by the day, but by the hour. Earlier, and sometimes even now, this issue was resolved with the help of a good old braid for grass.

But technologies are not standing still and now in this case, assistants such as electric and gasoline lawn mowers help.

The gasoline mower has several significant advantages over electric, such as mobility and lack of danger of electric shock. But there are many drawbacks, for example: high price, a lot of noise, expensive fuel and significant weight.

Electric mowers are cheaper, easier, work on inexpensive energy, and are not difficult to maintain and repair. These advantages become the main reason for their great popularity among buyers of this type of technique.

But despite the pretty good quality, improper operation and a lot of load, they can disable the device. In such cases, you should not immediately carry the device to the repair shop, but try to find and eliminate the cause of the breakdown yourself. over, as mentioned above, electric lawnmands do not have as many nodes and details as gasoline.

The main thing is to have some tools and faith in yourself. In this article, I will just show you how I did my own repair.

AL-KO, the lawn mower of the company, has serious problems in work, namely: the engine stop without load and its strong overheating, was taken as an example. The motor stops, buzzes and start it again, only re.pressing the “Start” button helps. The button has to restart almost every 30 seconds, and with further work and more often.

Of course, you can work, but it is very annoying and gives the feeling that somewhere the problem is. Therefore, I wanted to figure out where?

After the mower was working within an hour, the engine temperature was measured. It was impossible to touch him with a finger. He directly radiated heat. If you continue to pay attention and continue to work on such a mower, an electric motor will inevitably fail.

It is necessary to determine the cause of the motor overheating. To do this, remove the top cover of the case, under which the engine is located and its power chains.

The lid is held on six screws with a hat under a cross screwdriver.

Unscrew these screws and remove the lid. upward.

Having removed it, you can see the impeller, the capacitor, two connectors and the engine itself.

At first glance, no special problems are invisible. The engine winding darkened slightly from the temperature, but so far it is not critical.

To more carefully inspect the capacitor, it is necessary to unscrew the mount and pull it out.

The capacitor of some external damage did not show.

To check it, you need to disconnect the capacitor and feed the engine for a short time. If he did not start and began to buzz, then the capacitor is intact, because the engine was launched with him. Disconnect the power and connect the container connector back to the engine circuit.

Next, try to twist the impeller. It is mounted on the axis of the rotor and rotates rather tight.

And the reason for such severe rotation is a mechanical brake, which for safety stops the engine rotation when the power is turned off.

It looks like a sleeve that moves freely from top to bottom, along the rotor axis.

Когда напряжение на двигатель не подано, эта втулка прижимается верхней частью о крышку, на которой приклеено две резиновые полосы. Thus, the knife is inhibited on the rotor shaft.

When feeding, the brake sleeve under the influence of the magnetic field is drawn to the center of the rotor and provides free move.

With a careful examination, this sleeve with the brake noticed that at the time of turning on the engine, the brake is retracted and gives the shaft free rotation, but after 2-3 seconds it is released again and begins to slow down the motor. This should not be. Hence the stop of the knife during operation and overheating of the engine.

To find out what is the reason for this work, you need to remove and disassemble the engine.

To do this, disconnect the connectors and put the device on the side to get to the clamping screws. Access to them closes a knife with mounting elements.

To remove it, first you need to unscrew the knife bolt (cm. Figure below).

Direction of rotation, like a regular bolt, and not with left thread. That is, unscrew it counterclockwise, and tighten the clock.

The head of the bolt is plastic, so using the key, it must be well planted so as not to “lick” the edge.

After extracting the bolt, the knife and its plastic disk are removed.

installation, disk, husqvarna, lawn

Under it is a height sleeve. With its help, you can slightly lower the knife.

Adjustment is carried out by the washers put under the sleeve (see. drawings below).

We remove everything, only the engine shaft and the hexagonal screws of its fasteners remain.

The key for these bolts has a distance between faces of 6 mm. Unscrew them counterclockwise. Removing the last screw, with one hand, hold the engine.

Fast search guide

The air intake is closed or the cooling ribs of the radiator are polluted.

The engine speed controller is faulty.

Too little or there is no oil in the engine.

Poor contact on the battery terminals.

The car moves slowly, uneven, or does not move at all.

A drive belt for the gear of the box is weakened or absent.

The contact to the electromagnetic clutch is weakened.

The knife switch is faulty or weakened contact with the cable.

Damaged seals, housing or gaskets.

Unequal pressure in the right and left tires.

Storage, winter storage, maintenance

At the end of the season, the car must be prepared for storage (or in case of prolonged inaction lasting more than 30 days).A sticky precipitate may be released from fuel, idle for long periods of time (30 days or more), creating the possibility of clogging the carburetor and impaired engine functions.To reduce the likelihood of sticky sediment during storage of fuel, use stabilizing substances supplied additional.Add a stabilizing reagent to the fuel in the fuel tank or in the storage container. Strictly observe the data on the ratio of mixed components indicated by the manufacturer of the stabilizing agent. After adding a stabilizing reagent, start the engine for at least 10 minutes so that the reagent reaches a carburetor. Do not empty the fuel tank and carburetor if you added a stabilizing agent to the fuel.

The preparation of the machine for long.term storage is carried out in the following order: 1. Clean the car thoroughly, especially for

The deck. To prevent corrosion, paint the damaged surface and apply a layer of oil to the lower surface of the deck.

Check the car for wear or damage

details and tighten all nuts or bolts that may be weakened.

Replace the oil in the engine; disposal

spent oil should be performed in proper order.

Empty the fuel tanks and add

Fuel stabilizer. Launch the engine and wait until the fuel is developed in the carburetor, or the stabilizer will not reach the carburetor.

Turn the spark plug and pour into the cylinder

approximately a tablespoon of motor oil. Turn the engine over so that the oil is evenly distributed along the cylinder, and set the spark plug in place.

Lubricate oils, compounds and bridges. 7. Remove the battery. Clean, charge and

Put the battery for storage in a cool, but protected place from a direct cold.

Keep the car in a clean, dry place and

Cover it for additional protection.

When placing an order for the supply of spare parts, indicate the date of purchase, model, type and serial machine number.Use only spare parts manufactured by Husqvarna.Annual check of the car in an authorized service workshop. a reliable way to ensure the effective and operation of the machine for the next season.

It is strictly forbidden to store an engine with filled fuel tank in the interior or in poorly ventilated places, where fuel vapors can come into contact with an open flame, sparks or a smaller torch of gas boilers, water heaters, clothing dryers, etc.P. Observe caution when handling fuel. The fuel is easily ignited and can lead to serious personnel injuries and property damage. Drain the fuel to the appropriate container in the open air and far from open fire. It is strictly forbidden to use gasoline for cleaning. Instead, use a degreaser and warm water.