Interskol angle grinder 125 with adjustment

The most advantageous offers for Interskol angle grinder-125 / 1400EL

Interskol angle grinder-125 / 1400EL

• Angle Grinder
• power 1400 W
• disk rotation speed up to 10,000 rpm
• disc diameter up to 125 mm

Reviews about Interskol angle grinder-125 / 1400EL

Advantages:
Soft start, the ability to both cut and polish, the electronics help a lot, the cord will not get hardened, an additional handle for 3 positions.

Disadvantages:
Considerable weight, normal for this kind of power.

Comment:
Solid performance. Already cut concrete and brick. So far, everything is fine.

Disadvantages:
BROKEN ON THE FIRST DAY OF OPERATION. Very long. It is not possible to work with one hand. You need to clamp two buttons to start. Speed ​​controller. useless thing that breaks often.

Advantages:
Everything is fine, but:

Disadvantages:
For 15 minutes of work, the gears were completely worn out, a trip to the service. warranty statement. subject to replacement or refund. Took the second. waiting for 10 days.

Comment:
The service said that the breakdown is not typical for this angle grinder, maybe so, now I’m thinking which one to take?

Advantages:
Inexpensive, lightweight, convenient, there is a speed control, smooth start

Comment:
The overall impression is a cool tool.
It is comfortable to hold in your hands and not slippery. everything is covered in rubber. Convenient main handle, additional handle can be screwed in three positions. For cutting, grinding, left-handed. for any operation, you can choose the optimal grip for long-term work.
Already she cut and polished metal, cut tiles, works well, does not heat up. Power, as it seems to me, so even an excess can be adapted to a large circle, but with its own it just flies.
The pluses: speed adjustment, which can be carried out on the go, protection against overloads and repeated switching on, a soft cord that does not interfere, in general, everything you need.

Disadvantages:
We bought 3 pieces for the workshop. On one of them I bit the disc and cut the gear teeth of the reducer (sic!). There are two left, while they work, for how long?

Comment:
In our backwoods there is no service center, you need to drive almost 1000 km. Why do I need such adventures for my money? Xs, how long will the remaining 2 angle grinder last. Domestic manufacturer, blet.

Advantages:
compact, soft start, it is possible to adjust the speed, not noisy in operation, inexpensive in price, lightweight

Comment:
not a bad tool overall. For 2 months now I have been using it in the house and around the house, then prepare the tiles for masonry or grind the fence, then cut the brick with concrete. When grinding, it is very helpful to adjust the speed under load. I also note non-slippery handles and a convenient protective cover. In short, I’m not complaining about the angle grinder.

Advantages:
Smooth speed control.
Assembled without gaps.

Disadvantages:
The gearbox turned out to be dry.

Comment:
Took it for minor repairs around the house. The first turn on was terribly loud, so I unscrewed the gearbox and saw how much lubricant there was, the lubricant was smeared only on the walls, the gears were dry. I removed all the grease from the walls and added my own, in the end it works without a hum and is relatively quiet.
It is not always convenient to quickly cut something with one hand, but on the other hand, it is not designed for one-handed operation.
At the moment, the 4n4 profile has cut more than 20 meters, cut off self-tapping screws, bolts, 300 pieces, grinding the wall 25 squares. works well, for the house it is quite a good tool for not a lot of money.

Advantages:
Lightweight, smooth start-up, comfortable.At subzero temperatures, the power cord does not tan.

Disadvantages:
Has not revealed yet.

Disadvantages:
Broke down exactly one year later. When the warranty ran out.

Comment:
With irregular home use, the bearing seat in the gearbox cover collapsed, the rotor began to walk, and as a result, the gearbox cover, the motor housing, the stator and everything else that was next to the rotor was broken for replacement.

Advantages:
Soft start, speed control, moreover, maintaining the set values

Disadvantages:
When grinding at low speeds, it gets very hot after switching off

Comment:
I chose for a long time, in general, a positive attitude, everything works, but the circle is still probably too small for such a power, it was necessary for the manufacturer to put 150.

Advantages:
-power;
– speed regulation;
– constant electronics;
– armored engine.

Disadvantages:
Short power cord, quickly glued fins.

Comment:
The machine is purely household. The electronic filling overheats during prolonged use. The result is quite predictable. burned out quickly. Repair is impractical.
sophisticated angle grinders have a heatsink for cooling the electronics, either aluminum or copper. Here. neither one nor the other.
So work it for no more than five minutes, and let it cool for half an hour. And its positioning by the manufacturer as professional. to put it mildly wrong.

Advantages:
1) two-handed design, which is mega-convenient at such power;
2) power, again;
3) a complete package of electronics on board, magnetic ring constamatics;
4) good cord;
5) complete dust protection;
6) great price tag;
7) the ability to put a grinding casing on concrete and connect to a vacuum cleaner.

Disadvantages:
there is a couple of the type of not the most convenient mounting of the casing, but it does not interfere with work. Ah, and now it is difficult to find on sale, as they say they disassemble quickly.

Comment:
Someone is dissatisfied with something, like there is no vibrating pen, quick nut, coffee maker, etc. But the truth is, you won’t be able to find an angle grinder with such characteristics for the money. So that power, electronics, dust protection, and overall build quality. So this is the best offer in the class of powerful 125-ok.

Comment:
I took it to clean the concrete from the old oil paint. There is an Interskol 1100 W angle grinder. During operation, the gearbox is warm, the windings are hot. In 1400, only the gearbox heats up well. Replaced the grease with another one, there are no changes. As a result, the work proceeds as follows. I work for 5 minutes with an angle grinder at 1400 W, I postpone rest. Corners, difficult places I modify lighter by 1100, etc.

Advantages:
Lightweight, adjustable speed, smooth start,

Comment:
My first angle grinder, only positive impressions in three months.
During this time, only work with metal. cut, polished, cleaned, there was no other work yet. Everything is convenient, it is not tense to hold, lightweight, does not slip in the hands, the additional handle can be rearranged in three positions. In addition, the start is smooth, it does not twitch in the hands. The cord does not get tangled under your feet, the speed is adjustable. By the way, it doesn’t make much noise either. There are protections against overload, against repeated switching on. In general, a test machine for a child’s price with adult capabilities.

Advantages:
light weight with decent power. protection against overload and jamming is declared. speed regulator. smooth start. The protective cover adjusts quickly without a tool. so that you do not need to climb inside the case to change the brushes not noisy. although there is nothing to compare with.

Disadvantages:
the power button is not fixed. if you grind for a long time, you get tired of holding your finger on the button. this is apparently done so that when jamming or rebounding, the finger falls off and does not cripple. when cutting, the on button is inconveniently located. its position is more suitable for grinding. the price is cheaper than layouts with similar characteristics by only 1 thousand rubles. the layout (it seems to be 300 thunder lighter) is still not killed. and interskol is apparently a rebrand of normal China. but the Chinese can easily mess up some game. you risk. when you sand in a vertical position, the wheel after a while from position 6 turns itself by 5 turns fall.

Comment:
just bought. before that it was low-power. sawed it off the corner of the gate of the metal clamped and it burned down. interskol easily finished cutting everything. now I remove the paint. it does not get very hot even after an hour of work. shoots at an acceptable speed.

Disadvantages:
It broke down after four 5 days of operation, the service center said that due to internal dustiness, the regulator was out of order. DISPOSABLE TOOL. do not buy!

Comment:
We gave the tool for repair and we were refused repair. due to “the fault is of an operational nature”. This is such a reply from the Interskol!

The tool was bought for stripping and removing plaster. irregularities of the self-leveling floor, etc.

The tool was used in a set with Interskol 2504.001 Casing “The casing is designed for angle grinders, angle grinder-125 / 1100E, angle grinder-125 / 1400EL INTERSKOL, when processing surfaces that generate a large amount of dust.”

The tool has been used as intended with a vacuum cleaner.

This tool worked for no more than a week (5 days, about 4 hours a day)

Advantages:
Grinds with dignity, lies comfortably in the hands, smooth start works great.

Comment:
The build quality of the instrument is very decent. Initially, I did not even consider this company, but it turned out that in vain. The power is decent, it gives out the declared revolutions, and most importantly. supports.

Advantages:
A creditable angle grinder, cuts tubing pipes without bothering at all. The speed control and smooth start works perfectly, set the speed and without losing power, you are ready to go.

Disadvantages:
Not a convenient start button, but got used to it over time. Heats up with prolonged loads

Comment:
With this angle grinder, I sawed wood, metal profiles and thick pipes. Sanding wood, removing old paint and rust from metal. nikapelki did not regret buying! If you are still looking for an angle grinder with a 125 disc. take it you will not regret it. IMHO price-quality.

Advantages:
The idea was good, two years warranty.

Disadvantages:
For a year of very not intensive use, it broke down twice and spent a couple of months in repairs under warranty. The speed regulator failed. At the service center, the master said that it was their disease. I really did not like the function of protection against accidental activation, it is bad to work with one hand. you need to hold the angle grinder by the handle at all times and press two buttons at the same time. The speed regulator smoothly jumps from the sixth position to the fifth or fourth during operation, reducing the speed.

Advantages:
Easy, not expensive, smooth start

Comment:
In general, I liked the angle grinder, bought it as a gift and it paid off, it is comfortable in the hand, by weight. lightweight, there are buttons for random start, speed controller, three-position knob.

Advantages:
Good assembly, good quality, powerful, during an hour of continuous operation (cleaning rust) practically did not heat up. The price is unmatched for such a price

Disadvantages:
The speed regulator is kapets. During operation, as a result of vibration, the speed spontaneously falls as a result of spontaneous rotation of the regulator. Factory flaw. The designers probably thought that the angle grinder would just buzz, without load everything is ok. Well, for this price everything is fine

Comment:
The price corresponds to the quality.

Advantages:
Powerful, does not heat up, power button lock, rotary handle.

Comment:
Super machine. It does not get warm when you have to work for a long time. The power button is locked, so you can safely turn it on and work as you like. The handle turns as it should, you screw an additional one under the arm, as a result, you select the optimal grip for any work. I literally worked for her for hours: he cut metal and cleaned it from rust, cleaned it from old paint. It does not twitch in the hands, the cord is long enough, it is comfortable to use. Overall a pleasant experience.

Advantages:
Speed ​​control, button on the handle

Advantages:
Cost, power, quality

Comment:
In light of the advantages such as high power, good build quality, reliability and ease of use, disadvantages do not attract attention.
There is enough power with a margin. It keeps well at work, does not get warm, even if you work for half an hour or an hour in a row. Universal, you can also work on concrete, which we use constantly.
Soft start, speed maintenance, speed control, overload protection, restart protection. What else?
I never got up during this time. not bad indicator.

Advantages:
Smooth start, convenient speed control. Not darling.

Disadvantages:
With intensive work with grinding wheels, especially if you press hard, and at 1 speed, after 30 minutes the gearbox overheats and the angle grinder switches off. The first time it happened, I thought it burned out. After a break of 10-15 minutes, it worked as before.
Began to work more accurately, the problem disappeared.

Comment:
Good machine for home use.

Advantages:
For a long time I was looking for a small angle grinder with a handle and a switch like those of large ones with adjustable speed, keeping them under load and smooth start. you have to work without protection and if suddenly the angle grinder jumps out of the hands of an ordinary little switch, the switch remains on, but here, when you open the hand, it turns off, and, accordingly, on other babies it is not realistic to keep the small button constantly especially under load and for hours, and even clogged with dust and it is difficult to turn it on with one hand. In addition, all angle grinders with speed control have a power reserve so that the torque does not sag and, accordingly, are heavy and bulky in girth, so a handle with a button is simply necessary. Anti-jamming protection against restarting works tolerably well. In general, the angle grinder seemed lighter than the speed-controlled counterparts from Makita and DeWalt. Armored windings for concrete are very important because pebbles hit the winding, breaking and replacing the anchor. The brushes are closed with a lid on a screw and not a plug with a fine thread and an incomprehensible slot, therefore they are easily accessible and it will not work out that due to dirt and time it will not be possible to unscrew them. By the way, one brush stands with a shot. The price is ridiculous

Disadvantages:
Of course, comparing the maintenance of speed under load with competitors costing two or three more, the turnover sags more. The handle that is screwed into the gearbox has a slightly crooked thread (not coaxial), but it is noticeable only while you are tightening it, and I think this is not so on all handles. M, she is not really needed, there is something to replace it with, but the fact that there is a third hole on the gearbox where it can be screwed is a plus on the other 125 angle grinder this is not enough

Comment:
I am very pleased with the purchase, I do not use it for a long time and it is cool now, but I hope the overheating protection will also work at the same level and the angle grinder will serve me for a long time. My first angle grinder, by the way, too, Interskol 150 / 1300vat has been working for 12 years not often, but sometimes very intensively and without rest, as much as possible, and sawed the stone and worked with cord brushes and cut the metal. I even put a speed regulator on it so that the bricks were cut with a 230 disc, concrete of course does not work out like that anymore. 180th she withstands tolerably.

Advantages:
Soft start, speed control, moreover, maintaining the set values

Disadvantages:
When grinding at low speeds, it gets very hot after switching off.
Additionally, the speed control during operation gets lost, you have to fix it constantly with something, this is not very convenient

Comment:
I chose for a long time, in general, a positive attitude, everything works, but the circle is still probably too small for such a power, it was necessary for the manufacturer to put 150.

Comment:
Corresponds to its parameters, easy, with good revs and adjustment is.

Advantages:
Durable and high-quality body, not heavy, not expensive, smooth start-up

Comment:
Collected very high quality, with prolonged use does not overheat and does not smell of burnt plastic. Price. quality matches.

Comment:
Flying BALL BEARING 608-2RS 8X22X7 MM, (in Fig. No. 30), basically only cut the profile pipe. grinded no more than 10 laps. used from time to time. I bought the bearing myself and changed it (I remembered about the guarantee later). I continue to use.