Is it necessary to sharpen the cutters on a power tiller


The goosefoot attachment is for hard packed soil. It can be used on different models of power tillers due to the variability of the sleeve. These models are easier to operate but are prone to jerks and impacts when working in the ground. Active counterparts or factory-made products are not always able to handle heavy soils. This is especially true for versions with Chinese blades, where the quality of metal leaves much to be desired. Not only will it be difficult for the user to hold on to the equipment, but the load on the gearbox will increase significantly.

These tillers can be repaired by removing damaged parts and replacing them with new ones. There is also a width limiter. Additional pairs of cutters can be placed in a row at the operator’s request.

If you know in advance that you need to process heavy soil, you either have to pick up high-quality cutters manufacturers of Ukraine and Poland, or look for other modifications.

As for the spiral cutters, referred to as the virgin, this design is all-welded, which is done precisely to increase its strength characteristics during operation. That’s why it withstands heavy loads. The only thing that the user may not like is the slowness of work. But this is understandable: you won’t be able to run fast on a virgin soil, as much as one might want.

If you want to buy this option of milling machines, it is important to consider another disadvantage. during cultivation, the soil will be pushed from the center to the edges. This will result in a shallow furrow, which may require levelling the land in the future. Otherwise, spiral cutters are considered to be more reliable compared to their other counterparts. They are robust, reliable and durable. If you need quality tillage in a difficult area, they will be the best help for the gardener.

Find a comparison of tillers in the following video.

Goosefoot tillers are excellent for difficult soils and all kinds of weeds. However, because they cut them into pieces with a sharp edge, the weeds multiply. There is a variant of combined use. You should pass the plot with these tillers in autumn, and work with sabre-shaped cutters in spring and during the season.

necessary, sharpen, cutters, power, tiller

How to correctly assemble (install) gooseneck mills on a power tiller and whether it is necessary to sharpen them

Structurally, a tiller is a set of tillage blades placed on a rotating axle. Such a module consists of two parts, which are installed on the drive shafts of the wheels on either side of the power unit. Thanks to such an arrangement, the single-axle tractor is able to move independently during cultivation.

See also  Do-it-yourself soil hooks on the tiller

How to sharpen the cutters of a motor cultivator. sharpen or not?

It is also possible to distinguish the type of power tillers with power tillers, the rotary motion of which is ensured by the PTO shaft. The module is located behind the power unit and does not participate in the implementation of the movement. MtZ, Neva, Proab, Sich, Agro power tillers are produced in various modifications, with and without PTO.

There is practically no difference between bolt-on and bolt-on tillers. But for a cutter with independent rotation, there is an additional module with a PTO drive and a double-sided angular gearbox.

Active (sabre-shaped)

The knife blocks on these cutters consist of four cutting elements spaced 90˚ apart. There can be 2, 3 or more such units on one side of the drive. The number and width of blades depends on the weight and power of the power tiller.

The blades are curved strips of high-strength alloyed steel. Type 50KhGFA spring steel is well suited for self-treatment and subsequent hardening for self-made knives. Blades bends have alternate directions.

Active tiller design allows to cultivate areas with stones and roots without risk to break blades. But it is reasonable to use this type of equipment on light workable soils.


The cutting elements of these cutters are made in the form of a triangle of strong steel, located at the end of the stand. This arrangement is the reason for the extravagant name of the machine.

As with active tillers, the width and number of blade banks are determined by the tiller‘s weight and power. Number of cutting elements arranged on a circle in the cutting unit, from 4 and more. blades means better quality of soil milling, but the power of the power pack will need increased.

See also  How to sharpen a chain on a chainsaw with your hands

A rotary mower for a power tiller can come in handy on a country site.

These types of cutters are designed for heavy soils and virgin lands. The presence of extensive root systems in the soil causes frequent blockages.

Both tillage tools have advantages and disadvantages. When selecting an option for self-made, you must consider the structure of soils, the required degree of ground milling, the layout and power of the power unit, the complexity and method of manufacturing.

necessary, sharpen, cutters, power, tiller

What is a cultivator and what is it for?

To begin with, we must understand what is a cultivator, how it is designed and what is needed. So, this is a type of compact agricultural equipment designed for preplanting soil preparation. It allows to plow, loosen and dip the earth, as well as make furrows and harrowing. This unit allows you to greatly facilitate agricultural work on the dacha or homestead plot.

The motor cultivator is capable of working in places where full-sized equipment is inaccessible

Cultivators by type of mechanism are divided into groups:

  • Mechanical hand-held. Used as additional equipment to more serious equipment. They loosen the soil to a depth of not more than 5 cm and remove only weak weeds on the surface;
  • electric. Light, maneuverable equipment that is used on limited areas of land. The disadvantage is to work from the electric cord;
  • battery-powered. This type of agricultural equipment is a combination of all the advantages of electric counterparts with autonomy. They are heavier, but at the same time, mobile and safe;
  • petrol. This equipment is distinguished by its power, productivity and great weight. A good option for cultivating wide plots of land.

Motor cultivator with a gasoline engine

necessary, sharpen, cutters, power, tiller

Cultivators of any type consist of such basic elements as a frame, control levers, engine, rotor, wheels and cultivation devices (cutters).

Preparing a power tiller to cultivate the site

and more dacha owners and owners of private homes are buying motorcycles. Working with a power tiller on the garden plot to a large extent relieves the load and reduces the time to cultivate the land.Cultivation of soil with a power tiller is no-tillage, which less destroys the humus layer and is becoming more and more popular among owners of land plots.

See also  How to sharpen your saw chain correctly

In this article I would like to discuss a number of key questions about how to perform correct land cultivation with a walking tractor because mistakes that are often made by people who have little experience in operating a walking tractor lead to such results as poorly cultivated land, increased load on the engine and gearbox of a walking tractor.

A poorly done work on the preparation of the walking tractor for cultivation can also make you tired, although the degree of all these negative factors can be significantly reduced if you follow the basic rules of preparing the walking tractor to work, which will be discussed below.

The main points to which you should pay attention when preparing a power tiller for the cultivation of the plot:

  • Preparation and installation of cutters on a single-axle tractor.
  • Adjusting the coulter depth during cultivation.
  • Speed selection.

Let’s also consider the choice of driving direction for your power tiller during land cultivation. And so, let’s start to get acquainted with the cultivation of the land with the help of a motor-block.

Homemade tillers for a power tiller

Motoblocs of any firm will be with factory installed models. But it often happens that a farmer wants to increase the power of his cultivator. This is caused by the need for deeper tillage. To achieve the goal, it is possible to make the blades yourself. To do this, you need to follow the technology exactly to get a good tool.

The easiest thing will be to make and assemble a saber-shaped cutter by yourself. To do this, it is necessary to acquire a metal strip of high-strength steel, an angle grinder, additional tools for direct digging, a welding machine and a small-sized pipe.

Usually farmers make homemade models for a preconceived intended purpose. That’s why it is important to choose the direction of the blades when sharpening them. This will give them useful properties in the form of increased power and quality when plowing.