Is it possible to drill a brick with a screwdriver. Advantages

Is it possible to drill with a screwdriver

Not always screwdriver. A multifunctional tool. Often he performs certain tasks. But sometimes you have to deal not only with wood and simple fasteners. There are bricks, concrete and metal in the work. This article will talk about whether it is possible to drill a concrete or brick wall with a screwdriver.

Place Model
one. Metabo PowerMax Bs 2014 Basic 2.0ah X2 Case 34 N m Prices Review
2. Zubrov ZSSh-300-2 300 W 35 N m Prices Review
3. Makita DF333DWYE4 Li-Ion 1.5 A h 12 in x2 case 30 N m Prices Review
4. Dewalt DCD791D2 70 N m Prices Review
5. Interskol DSh-10/320E2 320 W 35 N m Prices Review
6. Bosch GSR 120-Li Li-Ion 2.0 a-h 12 in x2 case 30 N m Prices Review
7. Interskol DSh-10/260E2 1012200000 260 W 25 N m Prices Review
eight. Metabo PowerMax Bs 2014 2.0ach x2 bag 34 n m Prices Review
nine. Makita DF333DWYE 30 N m Prices Review
ten. Sturm! ID2145P 450 W 45 N m Prices Review

How to screw a self.Tapping screw into the concrete correctly

High requirements are imposed on concrete self.Tapping screws. They should withstand heavy loads and provide high strength strength for a long time. To improve fixation, dowels are used. Auxiliary elements that provide a motionless arrangement of self.Tapping screws inside concrete.

The dowel with a screw inside provides a long and reliable mount.

Dowel is a plastic or metal sleeve equipped with petals, hooks or spikes. When screwed, they work on a spacer and firmly enter the hole. This auxiliary tool is used in the following situations:

  • Large loads occur on the screw, and without such help it will not last.
  • The screw must be fixed to porous or cellular concrete, in which fixation without dowels is unreliable.
  • Objects are fixed in structures that are subject to constant vibration.

Electromechanical drilling technology

Making holes in brick using electrical tools is much easier than manually. For these purposes, a shock drill or perforator is suitable.

Punch for drilling a brick wall

The drill must comply with special conditions so that the brick can be easily drilled:

possible, drill, brick, screwdriver, advantages
  • It is necessary to use the drill only with the shock function. The shock drill has protection against overheating of the drill, so it will last much longer than the usual. It also exerts greater pressure on the material in which the hole is made.
  • A drill with a capacity of 600 watts is suitable for drilling bricks.
  • To make the exact holes of the desired depth, it is worth giving preference to a drill with a function of smooth speed control.

A construction punch costs more than a shock drill, but drilling with it is much easier. A good option would be to rent a technique if you need to make holes more than 18 cm. In this case, you need a punch with diamond crowns.

possible, drill, brick, screwdriver, advantages

It is worth paying special attention to the choice of drill. For small holes, a drill with a diameter of 6 and 8 mm with a winner will be needed. This is the alloy of tungsten and cobalt, which is able to break through durable material without additional sharpening. Drills are suitable for creating holes with a diameter of not more than 15 mm. Holes of larger diameter can be drilled using a special nozzle. Bour. It is suitable for drilling holes with a diameter of 15 to 28 mm.

Drilling technology for a shock drill or construction perforator is the same:

  • First of all, you should take care of protection in the process of work, since brick or metal crumbs can get into the eye. A welding mask is suitable as protection. If there is no one, you can use the goggles.
  • At the place for the hole, you should make a label for future drilling.
  • After you can start drilling. Shock drill or punch should be kept at right angles. If the tool is sloping, the drill will break. The pressure should be smooth, you can not make a lot of effort, since you can damage the wall or break the drill.
  • Since brick refers to dense materials that are not easy to process, it is necessary to cool the working tool in the process of work. To do this, you need to lower a little more than half the drill into a container with cool water. This must be done carefully so as not to get to the electrical mechanism itself.
  • The drilling process must be constantly monitored. When drilling the wall, there is a possibility of touching the wiring. It is also worth considering that brick is not uniform in its structure. If the dust from the drill has become black, the brick section is burned. In this case, you need to drill at low speeds and constantly cool the tool.

Pros of drilling machines on concrete

List of advantages of this class of tools:

It is very convenient that after work the device can be removed back to the case with which it was sold.

  • Autonomy and ability to hold the charge for a long time (in models with the absence of a network electro cable);
  • Light drilling of durable materials;
  • Drilling speed adjustment;
  • Energy intensity and power represented by varieties for each specific type of work;
  • Safe use due to low voltage even in humid conditions and in the open area of ​​the construction site;
  • The ability to work in hard.To.Reach and remote places;
  • Storage in a special case.

Drilling holes in the wall correctly: general rules and recommendations than drill

In order to correctly drill the wall, you need to take into account the material from which it is made, based on this, it is necessary to choose the tool.

  • When working, keep the tool correctly. For example, the drill in the hands should be directly, and enter the surface in a vertical direction;
  • For convenience, use an additional handle;
  • Depending on the surface of the surface, select the necessary.
  • Concrete, stone, brick wall. Use a carbide drill, more often a winning;
  • Metal. A drill for metal;
  • Tiles, ceramic tiles. Special cord for these materials, sometimes you can replace the concrete drill with surfacing;
  • Chipboard, wood. For holes of less than 10-12 mm, a metal drill is suitable, for the larger ones, special cores for wood are used.

Is it possible to drill concrete with a screwdriver

Greetings! This article will talk about whether it is possible to drill concrete with a screwdriver. It happens that it is necessary to make a hole or recess in concrete, and besides a screwdriver, there is nothing at hand. We’ll have to think about what to do with it. There are of course shock screwdrivers, but even they will not cope with concrete. The maximum is a brick.

Of course, I still recommend getting a perforator for such cases. Even the cheapest. You will make holes then in seconds. But if you need to do work right here and now, then you can try the following method. True, for him, in addition to a screwdriver and drill, two more things will be required. A punch and a hammer.

The drill can be used ordinary for metal. Though after this work it will instantly be dull and then it will have to be hidden to drill the metal. If the screwdriver is struck, then you can apply a drill on a brick with a carbide attack at the end.

How to drill?

  • First, put the punch to the right place and knock on it with a hammer until a certain recess appears.
  • Then take a screwdriver and drill a drill. So you delete what the punch was overwhelmed, and you can also advance a little more, as the drill can drill the solution. But it cannot cope with a large filler, such as stone or crushed stone, so it can only be drilled before it rests on them.
  • Когда сверло упирается в камень или щебень, то снова берем пробойник и колотим по нему молотком.
  • Repeat the actions until the desired result is obtained.

Work is quite difficult and requiring a lot of effort. But nevertheless leads to the desired result. That is, the work that the punch does on the go, in this case, you will have to make a punch manually.

If you replace the reinforcement during work, then change the place of drilling. Of course, you can try to drill the reinforcement with a drill for metal, but this will be an even more laborious process, so it is easier to change the place of drilling.

Drilling with a diamond crown

In fairness, it is worth writing about such a method as drilling concrete with a diamond crown.

There are special drills for diamond drilling, which are quite massive devices that are drilled with diamond crowns. And theoretically, such a crown can be adapted to a screwdriver. In these crowns, the seat is a small rod with a 1/2 inch thread. And if you have a 13 mm cartridge on your screwdriver, and not 10, then you can squeeze such a crown right behind this rod.

If the cartridge is 10 mm, then you need to come up with any adapter.

However, this story has one fat “but!”, Which completely crosses out all these plans. And this is “but!”. The price of a crown that is comparable with the price of a new punch, and often even more expensive. Therefore, this method can be immediately thrown aside.

See also  How to insert a drill into a bosch drill

Thus, the concrete can be drilled with a screwdriver, but it will be difficult to do it. In fact, the main work will be completed by the punch. During the Soviet Union, people in concrete actually made all the holes precisely by the punrate and did without screwdrivers or drills at all. Scurop reverlet in this case only a few simplifies work.

DRILL VS. DRIVER (What’s The Difference?!! Cordless Drill Vs. Impact DriverCOMPARISON)

Therefore, again, I recommend getting a perforator. For example, on the site all.Tools.Ru the cheapest punch can be bought for very funny money. You can make sure that by clicking here.

Well, on this article you can finish. Thank you for your attention!

Greetings! This article will talk about whether it is possible to drill concrete with a screwdriver. It happens that it is necessary to make a hole or recess in concrete, and besides a screwdriver, there is nothing at hand. We’ll have to think about what to do with it. There are of course shock screwdrivers, but even they will not cope with concrete. The maximum is a brick.

Of course, I still recommend getting a perforator for such cases. Even the cheapest. You will make holes then in seconds. But if you need to do work right here and now, then you can try the following method. True, for him, in addition to a screwdriver and drill, two more things will be required. A punch and a hammer.

The drill can be used ordinary for metal. Though after this work it will instantly be dull and then it will have to be hidden to drill the metal. If the screwdriver is struck, then you can apply a drill on a brick with a carbide attack at the end.

How to drill?

  • First, put the punch to the right place and knock on it with a hammer until a certain recess appears.
  • Then take a screwdriver and drill a drill. So you delete what the punch was overwhelmed, and you can also advance a little more, as the drill can drill the solution. But it cannot cope with a large filler, such as stone or crushed stone, so it can only be drilled before it rests on them.
  • Когда сверло упирается в камень или щебень, то снова берем пробойник и колотим по нему молотком.
  • Repeat the actions until the desired result is obtained.

Work is quite difficult and requiring a lot of effort. But nevertheless leads to the desired result. That is, the work that the punch does on the go, in this case, you will have to make a punch manually.

If you replace the reinforcement during work, then change the place of drilling. Of course, you can try to drill the reinforcement with a drill for metal, but this will be an even more laborious process, so it is easier to change the place of drilling.

Drilling with a diamond crown

In fairness, it is worth writing about such a method as drilling concrete with a diamond crown.

There are special drills for diamond drilling, which are quite massive devices that are drilled with diamond crowns. And theoretically, such a crown can be adapted to a screwdriver. In these crowns, the seat is a small rod with a 1/2 inch thread. And if you have a 13 mm cartridge on your screwdriver, and not 10, then you can squeeze such a crown right behind this rod.

Learning to drill the walls

#3 Elena

You can go to a large construction store and explain that you are going to drill. They will advise there what dowel is needed and what drill. It is better to take a few dowels and the set was checked, it will still be useful on the farm. For hinged pots, I used a hook dowel. It is very difficult to drill in a horizontal position, so it is better to ask her husband.

#10 Chapa

Cool here. Weselova, drill brick, say? And a perforator or at least a shock drill purchased? Creation of a hole in a tree, plastic, metal. Goes due to cutting. The acute edge of the drill cuts the layer of material. And a completely different principle when creating a hole in concrete, brick. The winning drill is not so much a drill as a chisel, which crumbles the material, and then due to rotation, these crumbs along the screw are removed from the hole. And you can wrap a winning drill about a brick. There will be no hole. It is necessary to hammer.

Kroky, usually the future holes on the metal are planned by Kern, this will not help much with the brick wall (the performance at the expense of the first blows with a non.Pressure pressure will outline, the main solid hand and punch is heavier), but the core can smell (if unprotected. Immediately swollen, overwhelmed. Overheated. Sicks, Kern is designed for plastic materials. Try to put a lamp on the titanium or even better on a ball from the bearing.)

#12 Kroky

Chapa (25.6.2006, 11:54) wrote:

#13 Chapa

Kroky (26.6.2006, 14:47) wrote:

DI, as it were, the melting is done so that the drill does not crawl to the side at the beginning of the drilling of three material (metal), because the tip of the drill is not a needle, but when drilling chipboard, MDF and plastic pressure, the drill is remembered into the material, and the process. Go.

Somehow, even thoughts did not arise that it was necessary to mel the chipboard, MDF and plastic.

#14 Kroky

Chapa (27.6.2006, 14:49) wrote:

To figure out how to properly drill metal with a drill, you need to derive a number of basic rules, from which it is not advisable to depart:

  • You need a drill or a screwdriver, a core with a hammer, protective equipment and a drill cooling agent (most often machine oil).
  • At the beginning of work, you need to mark the center of the hole
  • Put on protective equipment. Chips can easily bounce into the eyes. Then it will be problematic to extract from there without specialized medical assistance.
  • Nap the center of the hole.
  • Start at low speeds
  • Periodically remove the drill from the hole cleaning the chips and cooling in the oil.

Observing the above rules and sequence, you can easily make holes of any diameter. When performing which the shelf life of the drill will be maximum, due to the exposure of low revolutions and its cooling in oil.

On a large number of drills, you can set a depth limiter that allows you to configure the drilling depth. You may need it when drilling deaf holes.

Tips on how to use a screwdriver correctly

Screwdriver. A tool designed to tighten the fasteners. In the presence of drills and special nozzles with it, you can also perform some other operations.

  • Device and purpose
  • How to work in twisting mode?
  • Is it possible to drill?
  • Polishing
  • Operating advice
  • Tool care rules

Device and purpose

The screwdriver is used for various construction and repair work, but its main function is Rapid screwing and twisting fasteners: screws, screws, bolts, screws.

It helps to cope with a large volume of tasks for significantly less time than when using a screwdriver.

Budget screwdrivers of small and medium power are used in the assembly, installation and dismantling of furniture, equipment, the construction of frame structures (partitions, walls, suspended ceilings) and other objects. A powerful tool with the shock mechanism copes with the drilling of holes.

In addition to standard operations listed in the instructions for a screwdriver, it can also be used for other tasks. With the help of a mixer nozzle, sparse solutions are kneaded. Through a special adapter, the device is connected to the ice discovery to quickly make the holes.

The case of most screwdrivers is made of plastic. Thanks to this, the total weight of the tool decreases. Inside the case are placed:

  • Engine. Depending on the type of device, it can be electric or pneumatic. The former work from the network or battery, the latter. From the tank with compressed air or compressor.
  • Gearbox. A geover mechanism that transfers rotational movements from the engine to the spindle.
  • Clus-regulator. Connected to the gearbox, with its help, adjusting the depth of screwing and the rotating moment.
  • Start capacitor. He launches the engine.
  • Chuck. Bits, drills, end heads are inserted into it. The most common fast-and-packed three- or four-cup.
  • Power supply (battery) and/or network cord.

On the case there is a control panel with a power button, a speed switch. Reverses are used to work in the unstable mode. Additionally, a screwdriver may have a backlight, fuse.

How to work in twisting mode?

Before starting work, you need to prepare the tool. If it works from the battery, you need to put it on charging.

The next step is to install a bit. To choose the right nozzle, you need to take into account the size of the mounting hat and the type of slot. Bits differ in type and diameter:

  • Shlitz. It is used most often. Designed for twisting screws with a secret head with a rifle under a flat screwdriver, screws. The width of the tip varies.
  • Cross. With their help, spin and twist screws, screws with a secret head. The tip has 4 radial diagonal ribs.
  • Hexagonal. Used for fasteners, the head of which has hexagonal recesses. Scuros and screws of this type are used in assembling furniture and appliances.
  • For bolts and nuts. Nozzle with a tip, inside which a hexagonal recess is made. With her, the tool is used as a gaykovert, screws, screws, bolts are twisted.

There are other nozzles, but they are used less often. How to change or even remove the bit? Having determined which bit is needed, they insert it into the cartridge. The installation method depends on the type of cartridge. The fast.Packed nozzle is inserted as follows: they turn the cartridge counterclockwise until the distance between the fists increases. They push the end of the nozzle between them, twist the cartridge clockwise so that the fists are closed and reliably fix the part.

In a screwdriver equipped with a turnkey cartridge, the process of changing the nozzle is more difficult. First, the key is inserted into a special hole on the device, it is rotated counterclockwise to loosen the clamp. Insert a bat, fixed by rotation of the key clockwise.

The next step is to check the tools of the tool. If the screwdriver eats from the network, connect it to the outlet. Click on the start button, check if the bit is scrolling. The rotation speed is regulated using the same button, weakening or increasing the pressure. The tip of the bits is inserted into the recess on the fastener hat, pressed on the launch button.

See also  Which drill to choose for home use

If you need to unscrew the screw or screw, switch the reverse button.

Is it possible to drill?

You can use the tool instead of a drill only if such an opportunity is indicated in the technical passport of the device.

However, soft materials, such as drywall, are drilled even with a low.Power screwdriver.

To do this, instead of the bit, you need to insert a drill into the cartridge for working with GKL.

possible, drill, brick, screwdriver, advantages

To pull out a drill or other nozzles, you need to spin the cartridge with your hand or key. You also need to rearrange the coupling in the appropriate position, usually the drill icon is depicted in this mode. The nozzle is put to the marked surface at right angles. It is not recommended to deviate. This will complicate the stroke of the drill, increase the diameter of the hole performed.

To drill a concrete or brick wall, tiles, you need a tool with a high speed of rotation (from 1200 revolutions per minute) and a large torque. Screwdrivers with the shock mechanism cope with the task more efficiently and faster.

Polishing

To make polishing the body, headlights of the car or other surface with a screwdriver, additional nozzles are needed. Polishing circles. Circles made of a cord or leather are used for preliminary cleaning. Fleet nozzles are used for both cleaning and final polishing.

  • The surface that needs to be polished is washed from dirt and dust;
  • Dried;
  • Apply the abrasive composition to the polishing circle;
  • Sequentially process all areas with smooth movements without strong pressure.

Is it possible to drill brick with a screwdriver

Online tool store with delivery in Russia!

Than and how to drill various materials

For those who still doubt what tool to use to drill various materials, we offer a small instruction for choosing the necessary tools.

Chipboard, wood and thin metal Universal option for “soft” materials. Battery drill. Powerful enough to drill and maneuverable enough to work with fasteners. To just twist, to spin the fasteners, there is enough accumulative screwdriver-the lowest, but a light and compact tool. Main characteristics: Torque. One of the main parameters for working with fasteners. 12-15 nm (a maximum of 30 nm), professional-from 30 nm will have enough home models. If the maximum speed is below 1000 rpm, it will be convenient to tighten the screws with the tool and drill soft materials (wood, metal, plastic). If you are going to drill metal, choose models with revolutions above 1,500 rpm. They have two speeds: the first for fasteners, the second. For drilling. For serial work (like installing drywall sheets or lining with lining), it is better to choose network screwdrivers with a depth limiter. Network drills, as a rule, are cheaper than the battery at the same power and are not tied to the battery charging. But they have worse with maneuverability.

BRICK To drill a wall in a brick house, a shock drill is enough, but it is ineffective in concrete. For frequent brick work, we do not recommend drills. They are very “tired”, overheating, break faster. When drilling on the tool, you will have to press. Important features: the higher the power, the higher the impact force and longer work without breaks. 2 speeds expand the scope of the drill, but increase weight and dimensions. At the first reduced speed, the maximum torque develops: for the holes of a large diameter or work as a mixer. The second drill is used to drill metal and brick. An additional handle for the second hand will make hard work a little easier.

CONCRETE At least a concrete “panel” and worse than a brick house, it is more difficult to drill in it. A powerful shock drill will also come for single work, but in general, concrete will only take a punch. He will cope with brick, stone and reinforced concrete. The energy and amplitude of the blows are high, you do not need to press the tool, it does everything himself. But take into account that the perforators are large and heavy. Main characteristics: the higher the impact force, the greater the diameter of the hole drills the punch. Light models have a blow of 1 to 3 J, in medium. From 3 to 10 J, in heavy. From 10 to 30 j. Working modes: drilling, drilling and detected. The first mode is for wood, metal and fragile materials like tiles, the second. For drilling holes in concrete, brick and stone, the third is useful to make a stroke or recess in the wall. But not all models have it. There are three types of cartridges: SDS-Plus-for light and medium models, SDS-Max-for heavy, SDS-Quick-only for Bosch tools. Reverse is needed to release a stuck equipment. Sometimes lamella, button and brush. Based on the practice, the button and flag reverse is more often burned out, and the flag is just broken off. The brush is more reliable and retains speed when rotating in the opposite direction. Safety of work provides a safety coupling. If the drill jams, it will stop its rotation. And the anti.Vibration system will simplify the long work.

Is it possible to drill a brick with a screwdriver

In the Society section to the question of how the drill and concrete drill differ?? And is it possible to drill concrete drill on metal? The best answer specified by the author Freenett is usually used for concrete with attacks from scrap.Ceramic solid alloys (such as VK8, T15K6 and T. P.). They are still mistakenly called “winning”. Such corruptions and incisors in industry are successfully processed and metals.But for home drilling metal they are expensive and it is more difficult to sharpen them is more difficult to sharpen

For concrete, this is not so important. It is rather not drilled, but crumbles

Especially when using modern shock drills.Therefore, in everyday life they use a Rapid.Cutting steel. In concrete, they are very quickly erased, for metal cheaper and easier to drag. The primary source is a technologist. Although in the past.

Hey! Here is a selection of the answers to your question: how the drill and concrete drill differ?? And is it possible to drill concrete drill on metal?

The answer from Alekseym is, but not for long. First will become dull, and then breaks.

Answer from AlekseygolovkaDifferent shape, spraying and usually material

The answer is from Lyudmilasey from the fact that the metal is harder than the concrete. Hence the different structure of the runs.

The answer from Vladak understands that in the drill on concrete a stronger tip. Therefore, the metal drill will break when drilling concrete.

The answer from Sergey MinochkinSterel on concrete have a winning attack with the help of it easier to drill solid materials, concrete can be drilled with a simple drill, but it will often have to sharpen it

The answer from Lyudmila Kochegarovserel on melalls go with the winning tips, it differs in special strength, you can drill concrete, but they differ that are made for different materials.

Answer from Jacob Kreiserpo Concrete with carbide attacks.

Hey! Here are more topics with the right answers:

How to properly drill concrete to an unstressed screwdriver

Tell a beginner how to properly drill concrete to an unstressed screwdriver. Shurovyrt is unstressed, Milwaukee 2701, Crushed a decent, Artu. (I thought it would be better than Makita-Metabo from the set).

Drilled ceiling ceiling, holes for dowels. In general, 2 small recesses (D 5mm, l

25-27mm) made as I wanted. Neat (the punch was ugly, sorry for the ceiling). Drilled (3 divisions (from 4) batteries took 2Ach) with frequent breaks, sometimes slightly tapping with a hammer on another self.Tapping screw.

As a result, a surprise: I discovered that the drill was half.Killed. It began to paint the metal at the welding point with a carbide tip, and the tip itself seems to have dulled. Photo see. Below. No “drilled drill” was reduced closely, but once plastic accidentally touched, the micro-redness of molten plastic remained on the drill.

Drilling in a brick wall.

Experts, did not raise the old topic, especially since I did not find an answer there.It is necessary to drill from the facade of the brick (probably hollow gray brick) apartment building 4 neat holes for the dowel 16×160, advise Sovera (drilling) and drilling modes (drilling). One.Drill a perforator with or without drill?I heard that the hole is greatly broken by the drill. 2.Drill a drill with or without a drill? 3.Drill for a drill with or without tip? Thanks.

And what is there to think? Perf in hand, drill in size and forward. If I know that the insides are curly against the wall, so the drill is smaller than the size of the dubil, this is not to scroll at the rotten wall. Drilling can also be drilled, but this is when a lot of time and iron patience.

Some perversions for 4 holes. Saw shura, saw. (with)

One breaks up if the drill or hands are crooked.

I don’t know what you are so afraid to drill a drill I recently easily drilled 2 through shit in the Council of People’s Commissars in the Council of one and a half brick of red for a boiler 80 about 20 minutes, if the drill was not overheated and the drill would have managed faster

Brick will come down to a drill or a perfume without a blow easy. A perfume with a blow should not be drilled. The drill must be taken with the tip.

What are you? Seriously? You definitely don’t need to drill tiles with a blow, you can split. I will introduce ceilings in the sweat of the faces engaged in your perversions. There the baguette must be fixed after 20-30cm. They will not earn on a piece of bread with your “advice”. Yes, they will not listen to you either.

Behind Baikal, plus, just perfic is not very powerful and slowly.Without excessive pressure

Brick (red) is easily drilled and without a blow.I tried it myself more than once.

Drill if there is a lot of free time at home. No one switches your switch. Professionals-time have money.

See also  What is the difference between an impact drill and a conventional drill?

Not justified is difficult, but common thought is in two diameters of drill. You can also a regular bungon drill with attack. Silicate brick does not master the metal drill without attacking, if it is overpowered, then one hole

Hollow gray brick has never met. Silica. Full.Bodied.

Is it possible to drill with a screwdriver “Is it possible?

Is it possible to drill with a screwdriver 08/05/13

It is possible, with modern screwdrivers, you can easily make a hole.

Scurgets are not just a construction tool, it is the most popular and in household situations that sometimes arise in our life. The screwdriver has many purposes: twisting and twisting of screws and self.Tapping screws, drilling wood, metal, chipboard, OSP, plywood, tiles and other materials, as well as brick and light concrete (if there is a shock function).

Screwdrivers can be 2 types of network and battery. Comparing these types, it can be noted that the network screwdriver has the advantage that it is always ready to work, and the battery must still be charged (this may take several hours).

The ability to drill various materials directly depends on the speed of rotation and torque. Having a high torque with a screwdriver, you can both twist screws and drill. With a small torque, only soft materials can be drilled, for example, a tree. To tighten screws, the rotation speed should be 400-500 rpm. If you need to drill, then the rotation speed must be set at 1200-1300 rpm.

Also, a wide important element in a screwdriver is a gearbox, on which the angular speed of rotation of the working shaft of the device depends. For drilling, you need 1200-1500 rpm, 500 rpm will be enough to tighten screws.

If you choose a mobile screwdriver, then see that there is a spare battery that will help to avoid downtime in work. And also if the first is out of order, you will not need to urgently run and buy a new battery. The cost of a new battery is 80% of a good screwdriver.

Screwdrivers can be equipped with various batteries:

The lithium-ion battery is considered the safest material for humans, but it is not resistant to low temperatures.

Before purchasing a screwdriver, you need to try it in action, many stores provide this opportunity. The screwdriver should conveniently be in your hand, otherwise you will have difficulties when working with it, your hand will get tired very quickly.

A cheap and not high.Quality screwdriver can fail very quickly, so it is better to spend money on a good tool once and work for your pleasure.

How to use a tool?

Basic rules when working with electrical equipment:

  • Charge the battery to full power. When this parameter is weakened, the device will not work in full force.
  • The depth of screwing the fastening element is regulated immediately before use. To do this, extract a cartridge, mount and clutch.
  • Install the nozzle in the cartridge. It is chosen depending on the strength characteristics of the material in which it is necessary to make a hole.

For normal operation, the cartridge should be treated with lubrication and cleaned, not allowed to enter water, various contaminants inside the tool. It is also necessary to control the operation of the power tool, monitor the load. If the device begins to work with effort, then you need to lower the speed of rotation in order to avoid overheating, control the temperature of the case and when heated, immediately allow it to cool.

Work tools for work

Different tools are used for work, basic: drill, perforator, screwdriver. When using everyone, there are nuances.

Drill

The tool is suitable when you need to make several holes. You can use the usual drill. Suburbating the winning drill into the body of the wall, sometimes you need to break the concrete with a punch, which coincides in diameter with a hole. This is necessary when the drill begins to get stuck in the surface, bumping into too dense areas. The process is quite laborious.

For greater efficiency, you can use universal sills that have diamond spraying. They are installed only on a conventional drill or on the tool where the vibration function is disabled.

For a large volume, a shock drill and a core with winning tips are used. They are designed for holes up to 12 mm. The drill is suitable for work with metal, concrete.

Perforator

Perforator. Universal instrument. With it, you can make a hole in the wall of wood, tile and concrete.

The tool has several functions. Drilling, drilling and impact mode. To make a hole, you need to select the right drill depending on the surface and work, selecting the mode.

Few people know these SECRETS with the INDICATOR SCREWDRIVER!

Shurovyrt

Shurovyrt is one of the in demand for repair and construction work. With it, you can tighten and twist screws, drill wood, metal, chipboard, plywood, tiles, plywood, light concrete.

What nozzles to choose

For each material, a certain nozzle is used:

  • Concrete, brick, stone. A drill with a carbide plate or a winning;
  • Tiles, glass. Cone.Shaped with diamond spray;
  • Metal. Spiral drill with a cylindrical cone;
  • Wood, drywall. For different diameters of the holes, cores are used: feather, ballerina, screw, saw crowns;
  • Foam concrete. Winning.

Is it possible to do without a drill and a perforator

Make a hole without a drill and a perforator, but not in a concrete wall. This will require a hollyman or a punch.

The working end of the tool is applied to the place where the hole will be. On the opposite side of it, you need to apply heavy strikes, rotating the tool after each turn.

How to work in twisting mode?

Before starting work, you need to prepare the tool. If it works from the battery, you need to put it on charging.

The next step is to install a bit. To choose the right nozzle, you need to take into account the size of the mounting hat and the type of slot. Bits differ in type and diameter:

  • Shlitz. It is used most often. Designed for twisting screws with a secret head with a rifle under a flat screwdriver, screws. The width of the tip varies.
  • Cross. With their help, spin and twist screws, screws with a secret head. The tip has 4 radial diagonal ribs.
  • Hexagonal. Used for fasteners, the head of which has hexagonal recesses. Scuros and screws of this type are used in assembling furniture and appliances.
  • For bolts and nuts. Nozzle with a tip, inside which a hexagonal recess is made. With her, the tool is used as a gaykovert, screws, screws, bolts are twisted.

How to drill through a wall

There are other nozzles, but they are used less often. How to change or even remove the bit? Having determined which bit is needed, they insert it into the cartridge. The installation method depends on the type of cartridge. The fast.Packed nozzle is inserted as follows: they turn the cartridge counterclockwise until the distance between the fists increases. They push the end of the nozzle between them, twist the cartridge clockwise so that the fists are closed and reliably fix the part.

In a screwdriver equipped with a turnkey cartridge, the process of changing the nozzle is more difficult. First, the key is inserted into a special hole on the device, it is rotated counterclockwise to loosen the clamp. Insert a bat, fixed by rotation of the key clockwise.

The next step is to check the tools of the tool. If the screwdriver eats from the network, connect it to the outlet. Click on the start button, check if the bit is scrolling. The rotation speed is regulated using the same button, weakening or increasing the pressure. The tip of the bits is inserted into the recess on the fastener hat, pressed on the launch button.

If you need to unscrew the screw or screw, switch the reverse button.

Useful tips of professionals

In the presence of a full wall, it is better to choose a winning drill. Only it can cope with particularly durable material and not be completely erased. Such equipment lasts longer, and it will be possible to use it after that.

In everyday life, 15-centimeter drills are usually used, but on sale you can also find screw drills that have impressive dimensions and are suitable for perforators.

How to make a hole without a marriage

In order not to be unpleasant consequences, you need to make sure that there is not only wiring in the wall, but also water supply, as well as sewer pipes, which are often hidden in the masonry. For the presence of electrical wiring, the outlet on the wall may indicate, from it the wires stretch to the switch.

How to drill without dust

If the room has already been finished, such a need may arise. In the absence of an electrical tool used to connect a vacuum cleaner, you can use the help of a second person who will remove dust as soon as it gets sprinkled from a new hole, leaning the absorption tube against the deepening. If you work yourself, you can place something in the place of influence on the wall, like a shelf, where all dust will fall.

Creating a niche

If it is supposed to drill a recess of more than 20 mm or you need to create a niche under the outlet, you should purchase a winning drill. Multiple holes are made along the intended line, jumpers between which are removed after a chisel and a hammer. An alternative and more technological solution will be the use of a perforator and crowns together with it.

How to drill thick glass

To do this, you can use a traditional drill for metal or ceramics. It is important to arrange a glass surface so that it is completely based on the base. A drill or screwdriver is used together with the drill. The surface is degreased, and the place of drilling is marked with plasticine.