Is It Possible To Mow With A Lawn Mower After Rain

Is it possible to cut wet grass with a trimmer and lawn mower and how to do it?

Is It Possible To Mow With A Lawn Mower After Rain

Arrangement of a suburban area (and even a local area in the city) is a very difficult matter. Especially because you have to look after the farm all the time. Many people also have questions about how to do this or that work, for example, is it possible to mow wet grass with a trimmer.

Features of the situation

Of course, such a question will not arise for those who live in the immediate vicinity of the lawn. Then you can wait a while and work when the grass dries up. But the need to remove wet grass arises immediately if you can visit the site only occasionally. What to do if you have to mow the lawn on the weekend, on another day with rainy weather, that’s the subtlety. The opinions of the summer residents themselves differ, so there is no particular sense in focusing on their position. You need to understand the nuances yourself.

The role of equipment

It should be pointed out at the outset that there are two main types of trimmers that "relate" differently to wet vegetation. Some devices are equipped with a gasoline engine, others are set in motion by connecting to the mains or installing a battery. In turn, electric mowers are divided into two subgroups: with the location of the motor in the lower or upper part of the machine. Safe enough for the user to remove damp grass can only be gasoline trimmers or hand scythes.

In this case, it is absolutely undesirable to use an electric lawn mower. Sometimes you can find statements that this requirement applies only to devices with a lower motor placement. Such an electric motor comes into direct contact with water. Due to this contact, you can be afraid of a short circuit.

If water does get inside the power plant, there is a risk not only of a short circuit, but also of an electric shock. It is worth noting that these restrictions apply not only to trimmers, but also to full-fledged lawn mowers. The assurances of manufacturers and marketers about safety should not be taken into account. To minimize the risk to yourself and your equipment, you should use a lawn mower. But there are a few more subtleties that must be considered.

Even if the mower does not fail and its owner is not electrocuted (let’s say such a favorable situation for a minute), it is still impossible to mow wet grass with a trimmer. This is a deliberately abnormal mode of operation, due to which the equipment wears out too quickly. Wet vegetation is much more resistant to cutting elements than it should be. Therefore, even very well insulated motors operate with overload.

Due to the sticking of wet grass to the knives and to the spindle, the load on them will necessarily increase. This cannot be avoided, and no skill of mowers, no methods and schemes of lawn clearing help. Not only the motor suffers, but also the shaft, which sometimes turns.

Problems when mowing wet grass can also arise with gasoline machines. Yes, they are more powerful than their electrical counterparts, but the load still exceeds normal values. First of all, piston pairs and other moving parts are "under attack". If there is no way out other than using a gasoline mower, you need to take care of it. When mowing raw grass, the machine is periodically switched to idle mode without load. 30 seconds is enough to remove excess heat, as well as save trimmer life.

And more about different situations

When talking about mowing wet grass, you need to distinguish between the following possible situations:

  • It is wet after the rain;
  • It is raining;
  • Moisture is caused by a wet area (lowland or groundwater).

In the first case, it is quite possible to take a chance and try to put things in order with a lawn mower. In the second, mowing is impractical. In the third, you will first have to deal with moisture and only then put the lawn or lawn in order. If you often have to mow wet grass after rain or "through dew" in a small area, then it is better to use not a trimmer, and not a lawn mower, but a simple hand scythe. You need to look not only at the grass that is removed, but also at the one where the power cable is put.

Moisturizing it can be a very serious risk factor. To mow the grass after rain, you need to wait a little. A few minutes, even with a very big rush, will not noticeably reduce the time that can be allocated for mowing.

As for the mowing of raw grass, there are still the following objections to it:

  • It is more difficult to walk with a trimmer or lawn mower in such conditions, you can easily fall and get injured;
  • You will have to spend more time on work;
  • After mowing, it will be necessary to thoroughly clean the machine itself;
  • Wet chlorophyll will leave more stains on clothes, leather, shoes.

Now you need to figure out exactly how to act if you still decide to use a gasoline trimmer to clean your lawn or lawn in wet weather. An important rule is to keep the grass at the optimum length. By overly shortening it, especially in the summer, summer residents risk provoking early drying of plants. It is unlikely that this will contribute to a good appearance.

Of course, they wear sturdy, waterproof shoes. Headphones or earplugs are used only when working with a two-stroke petrol trimmer. On a large meadow with flat grass, mowing is carried out along imaginary squares, conventionally dividing the entire territory into them. They first move along the perimeter of each square, then mow it from the inside and move on to the next part of the lawn. Regardless of the weather, before starting work, you should do the following:

  • Check the serviceability of the equipment;
  • Remove all debris and foreign objects from the site;
  • Replace, if necessary, worn cutting elements;
  • Determined with the direction of the mowing, so that the lawn does not resemble a "washboard".

For how to mow wet grass with a trimmer and lawn mower, see the following.

Why you shouldn’t cut wet grass with a trimmer

There are also indirect reasons why it is impossible to mow the grass wet from dew or rain in the garden. These include:

  • Premature trimmer wear
  • Harming the lawn.

How can a lawn mower be disabled by cutting wet vegetation? Everything is very simple. It is displayed as a result of a short circuit when water enters the power compartment. In addition, even if everything is very well sealed, there is a good chance that the engine will not be able to handle the heavy load put on the flex trimmer shaft. And the shaft itself can turn. Such loads most often arise from the sticking of wet grass on the knives and on the spindle to which they are attached.

For trimmers with a gasoline engine, mowing the grass in wet weather, due to heavy loads, increases the degree of wear of the main components and assemblies. Here you can note the premature failure of the piston pair, as well as other moving parts. Most often, the piston pair fails due to engine overheating. In our case, the motor will overheat due to the load created by wet grass when mowing.

What trimmers can you cut wet grass

To understand which trimmers can be used to cut wet grass, and which not, you should understand their device. Today, the consumer has two main types of lawn mowers:

  • Gasoline;
  • Electrical.

Trim tabs, depending on the location of the engine, can be:

  • Top-mounted electric motor;
  • Bottom-mounted electric motor.

From the point of view of safety measures, mowing grass wet from rain or dew can only be done with a gasoline trimmer or a "Lithuanian". The use of electric lawn mowers is highly undesirable. Especially when it comes to instruments with a bottom engine, as they are in the area of ​​water ingress. As a result, a Short Circuit may occur.

It is not recommended to mow the grass when it is raining and with overhead trimmers. In the event of water penetration to the power unit, it can not only short out, but also shock the mower.

Wet grass must also not be mowed with electric lawn mowers. The reason is the same as with trimmers with a lower location of the power unit. there is a high probability of a short circuit. In addition, there is a danger that, through negligence, you can accidentally cut the power wire supplying the unit.

Is it possible to cut wet grass with a trimmer

Permanently living in a private house, it is not difficult to follow a systematic lawn care schedule. Even in wet weather, wet grass can be cut with a lawn mower or trimmer a day later after it dries. It is much more difficult to take care of the natural grass in the summer cottage. Since visits fall on weekends, mowing also falls on these days. What to do if the weather is rainy?

About the harm to lawn grass

Many have probably noticed that if you mow wet grass with a trimmer, the cut is ragged. In the future, it dries up, and the grass itself begins to turn yellow. This can happen for several reasons:

  • Wet grass is very flexible and pulls to the ground;
  • Trimmer line is either too thick or round line is used.

In the first case, it is worth waiting for the vegetation to dry out. When dry, the grass always becomes harder. In the second case, it is worth replacing the fishing line with a thinner one or with a different profile. As practice shows, an even cut on wet grass can be obtained using profiled lines with a square or star section.

Those who at least once tried to mow the grass in the dew or in the drizzling rain noticed that the vegetation adhering to the knife and to the spindle is scattered in piles on the lawn. If they are not removed in time, then bald spots will appear on the lawn in places where wet grass falls. The cuttings begin to rot and the lawn begins to ache. This is how unsightly bald spots appear.

So, dear readers, decide for yourself whether it is possible to mow wet grass with a trimmer and a lawn mower, if you still want to put the lawn in order before the onset of cold weather.

Is it possible to mow with a lawn mower after rain

Permanently living in a private house, it is not difficult to follow a systematic lawn care schedule. Even in wet weather, wet grass can be cut with a lawn mower or trimmer a day later after it dries. It is much more difficult to take care of the natural grass in the summer cottage. Since visits fall on weekends, mowing also falls on these days. What to do if the weather is rainy?

To understand which trimmers can be used to cut wet grass, and which not, you should understand their device. Today, the consumer has two main types of lawn mowers:

Trim tabs, depending on the location of the engine, can be:

  • Top-mounted electric motor;
  • Bottom-mounted electric motor.

From the point of view of safety measures, mowing grass wet from rain or dew can only be done with a gasoline trimmer or a "Lithuanian". The use of electric lawn mowers is highly undesirable. Especially when it comes to instruments with a bottom engine, as they are in the area of ​​water ingress. As a result, a Short Circuit may occur.

It is not recommended to mow the grass when it is raining and with overhead trimmers. In the event of water penetration to the power unit, it can not only short out, but also shock the mower.

Wet grass must also not be mowed with electric lawn mowers. The reason is the same as with trimmers with a lower location of the power unit. there is a high probability of a short circuit. In addition, there is a danger that, through negligence, you can accidentally cut the power wire supplying the unit.

There are also indirect reasons why it is impossible to mow the grass wet from dew or rain in the garden. These include:

  • Premature trimmer wear
  • Harming the lawn.

How can a lawn mower be disabled by cutting wet vegetation? Everything is very simple. It is displayed as a result of a short circuit when water enters the power compartment. In addition, even if everything is very well sealed, there is a good chance that the engine will not be able to handle the heavy load put on the flex trimmer shaft. And the shaft itself can turn. Such loads most often arise from the sticking of wet grass on the knives and on the spindle to which they are attached.

For trimmers with a gasoline engine, mowing the grass in wet weather, due to heavy loads, increases the degree of wear of the main components and assemblies. Here you can note the premature failure of the piston pair, as well as other moving parts. Most often, the piston pair fails due to engine overheating. In our case, the motor will overheat due to the load created by wet grass when mowing.

Many have probably noticed that if you mow wet grass with a trimmer, the cut is ragged. In the future, it dries up, and the grass itself begins to turn yellow. This can happen for several reasons:

  • Wet grass is very flexible and pulls to the ground;
  • Trimmer line is either too thick or round line is used.

In the first case, it is worth waiting for the vegetation to dry out. When dry, the grass always becomes harder. In the second case, it is worth replacing the fishing line with a thinner one or with a different profile. As practice shows, an even cut on wet grass can be obtained using profiled lines with a square or star section.

Those who at least once tried to mow the grass in the dew or in the drizzling rain noticed that the vegetation adhering to the knife and to the spindle is scattered in piles on the lawn. If they are not removed in time, then bald spots will appear on the lawn in places where wet grass falls. The cuttings begin to rot and the lawn begins to ache. This is how unsightly bald spots appear.

So, dear readers, decide for yourself whether it is possible to mow wet grass with a trimmer and a lawn mower, if you still want to put the lawn in order before the onset of cold weather.

Arrangement of green lawns at dachas and country estates is becoming a popular pastime. At first glance, it seems that everything is simple in this matter: you have allocated a place for a green lawn, sowed the area with grass seeds and you are waiting for the field to turn into a green lawn. And only later comes the understanding of the need for proper care, and it, first of all, lies in the skillful operation of the lawn mower. It turns out that mowing the lawn is necessary not only for beauty.

Usually lawns are sown with grasses of the family of cereals, and mowing prevents them from flowering and fruiting. This simple technique prolongs the growing season of plants, promotes good rooting, the growth of lateral green shoots and tillering. Regular mowing helps to compact the turf, and the densely growing "cultured" grass prevents weeds from growing and spreading. Throughout the warm period, as a result of timely mowing, the green color of the lawn remains.

There is no certainty regarding the frequency of lawn mowing. This parameter depends on several objective factors:

  • Type of sown vegetation;
  • Soil type and top dressing;
  • Weather;
  • Seasonal characteristics of plant growth;
  • Purpose of the lawn.

The first lawn mowing activities begin in the spring, after the grass on the planned sown lawn rises to a height of 12-14 cm. It is recommended to mow the overwintering lawn when the greenery rises to 7-10 cm. 4-7 cm. Subsequent mowing is recommended every time the grass is pulled up to a height of 2-3 cm above the desired level.

The lawn mower is designed to adjust the cutting height of the grass. The range may vary from model to model. Equipment manufacturers indicate the minimum and maximum value of this parameter in the accompanying documentation. In inexpensive models of interchangeable positions, heights are most often 3, more expensive and advanced ones can have 5-7 positions of the regulator.

Different models may have different technical solutions for choosing the cutting height. There are two types of regulation: manual and mechanical. The first involves stopping the engine and manually changing the governor position. The mechanical method allows you to change the cutting height by pressing a button on the control lever, without interrupting the process.

Hence the conclusion: lawn mower owners should not allow high grass growth.

Also, the question is often raised whether it is possible to mow wet grass with a gasoline lawn mower. The rules state: it is not recommended to work with a lawn mower in the rain or after watering, since such mowing does not differ in quality, and there is a risk of getting ugly stripes on soggy soil.

In addition, there are other rules that must be followed when mowing the lawn.

  • A hot summer day is not the best time to mow the grass. Fresh cuts dry quickly, and their yellowness spoils the appearance of the lawn.
  • It is recommended to mow the lawn in the morning or in the evening in dry weather, one day after rain or watering, when the soil and grass are dry.
  • Make sure the mower blade is sharpened. Working with blunt knives is fraught with troubles in the form of foliage jams and grass pulling out by the roots.
  • Before starting mowing, you need to use a rake to collect fallen leaves, tree branches and other debris, level out the encountered earth mounds formed as a result of the vital activity of earthworms, ants and other insects.
  • You should decide on the direction of the haircut so that it is at an angle to the previous one. Otherwise, the appearance of the lawn will be associated with a washboard.
  • When cutting, you need to observe the parallelism of the following and do not leave narrow stripes, paying attention to the grass under the wheels.

In the care of beds and lawns, various methods are used to improve soil fertility. Mulching is essential to keep your lawns healthy and prevent soil erosion. Cut grass has proven itself well as mulch. From time to time it is recommended to mow the grass and prepare compost from it, which is used as organic fertilizer for the lawn in winter.

On sale there are wheel units in which the mulching function is already built-in. With this additional option, while mowing, the lawnmower mulches grass and unharvested fallen leaves: the process consists in chopping and carefully throwing organic matter onto the mowed part of the lawn. The advantage of such models is obvious: the lawn is cleaned of plant debris, which is recycled back to the soil surface and enriches it. But the cost of a lawn mower with additional features will be higher than the usual model.

Like any gardening tool used, wheeled lawn mowing equipment requires safe use. It is possible to operate motorized equipment only in good condition. this is an unshakable requirement. And before turning on an electric or gasoline unit, you must make sure that it is intact. When carrying out work, it is necessary to observe the general safety rules and the requirements of the instructions from the manufacturer.

There are five main problems when using a lawn mower:

  • Hitting an obstacle;
  • Leaked oil;
  • The knives are clogged with grass;
  • The unit rakes the ground together with the grass;
  • Uneven cut.

All problems can be solved to one degree or another. In the first two situations, you will most likely have to seek help from specialists. And to prevent such problems, it is recommended to check the area before cutting for stones and other objects in the grass of the lawn, and also not to store the device upside down.

Young, soft and succulent grass can clog the ejection hole, causing unstable, ragged motor performance. In this case, you need to periodically stop work to clean the hole from adhering grass segments using a thin sharp tool.

When the mower is powerfully picking up not only the stalks of grass, but also clods of soil, readjusting the cutting height so that the knife does not reach the soil will help to correct the situation. If the unit with a normally operating motor cuts the grass in uneven strips, shreds, then the problem is with the knife: either it is dull or not installed quite correctly.

Remember to wear personal protective equipment when working with the mower. Check your work equipment regularly to identify defects in time and solve the problem before a serious breakdown occurs.

Is it possible to mow after rain with a gasoline lawn mower. Is it possible to mow wet grass with an electric lawn mower

Increasingly, summer cottages are becoming not only a territory where you can grow fruits and vegetables, but also a place for recreation. Allocate zones where gazebos with barbecue facilities are placed and flower beds and lawns are laid out. To have such a lawn, not so much effort is needed: water it and cut it in time.

Once the lawn grass seeds have been sown, the immediate question is what tools are needed to mow the lawn. A simple oblique to make an even haircut will not work. For this, a large number of different tools have been released:

  • Lawn scissors;
  • Trimmer;
  • Lawn mowers.

It is a bar with handles, a special coil and a motor, which can be electric or gasoline. The reel has a spool on which a special line is wound or a knife is put on.

Note! The electric trimmer simply plugs in and is ready to go. It is lightweight, handy, but its operation requires long wiring and a socket, which is not always convenient. It will be difficult to mow a large area.

  • Low-power. Comfortable, lightweight, but can’t handle tough, wet grass and weeds.
  • Powerful. They come with a lower motor and an upper one. A special blade can be fitted to cut coarser grass. Models with a lower motor do not cut wet grass.
  • Rechargeable. lightweight, mobile. The disadvantages include the fact that the battery lasts for an hour.

A trimmer with a gasoline engine is heavier than an electric mower, but it differs from it in mobility. It has a forged shaft, shoulder straps and a powerful drive train. The device of the gearbox allows you to use in work not only fishing line, but also a knife and a toothed disc, which greatly improves the quality of processing the site. The lawn mower can mow very impressive areas.

With a trimmer, you can mow grass in hard-to-reach places (under benches, near posts), as well as mow paths, regardless of their location.

But there are still a few disadvantages:

  • Don’t get a flat surface;
  • Longer mowing causes the operator to get tired.

It is clear why this unit is so named. it is a technique for mowing grass on the lawn. Looks like a cart on wheels with special knives and a device for collecting cut grass. Lawn mowers come in different models:

  • With a gasoline engine;
  • Mains powered;
  • Rechargeable;
  • Spindle.

As with trimmers, gasoline lawn mowers are mobile and can work far from home. But they are heavier, more difficult to use and also make a lot of noise.

Lawn mowers with an electric motor are lightweight, do not make a lot of noise, are easy to clean, and absolutely harmless to the environment. The disadvantages include the need for a nearby electrical network.

Rechargeable batteries are good for everyone: there is little noise, the lawn is even, it is easy to work, only the battery lasts for a certain time.

Spindle mowers are those where there is no engine. The device is designed as if the lawn is being cut with scissors. It turns out very nice and neat, but the process is very time consuming.

This tool is used where it is impossible to work with neither a lawn mower nor a trimmer.

Gardeners are often confused as to whether it is possible to mow wet grass with an electric lawn mower. Unlike a manual scythe, mowing damp grass with a gasoline lawn mower is not worth it, and an electric one is not at all worth it. When working with a trimmer or a similar lawn mower, moisture can get into the electric drive or wires, a short circuit will result, and at best the tool will burn out, and at worst, the operator will suffer.

Do not work after a rainstorm and gasoline-powered equipment. The grass becomes heavier, leading to premature tool failure. First of all, due to overheating, the piston pair and other moving parts will break.

Important! If it is impossible to postpone work, then it is necessary to take breaks in work every 10-15 minutes and let the tool run at idle speed.

The lawn itself may also be affected. The soil will be wet, furrows will be formed and the grass will be mowed in ugly stripes. Young plants can be pulled out along with the roots, and in older grass the cut will be uneven, torn, which can lead to various diseases. The scattering of grass after the trimmer will also be uneven, which can lead to bald patches on the flat surface of the lawn. It turns out that you can mow raw grass with a gasoline mower, but it is better to choose another time for mowing.

Any equipment breaks down at the most inopportune time, and lawn care equipment is no exception. The most common breakdowns on lawn mowers include:

  • Defective engine. It is necessary to check the fuel in the tank, the performance of the spark plugs, the cleanliness of the filters.
  • Carburettor clogged. It is necessary to check the gasket between the carburetor and the engine, blow out the fuel hose.
  • Muffler defective. Clean anti-spark grid.
  • Damage to the gearbox. Check gears and bearings.
  • Failure of the starter. Check cord tension.
  • Air filter problems. If the braid starts without a filter, then you need to change it to a new one.

Important! If you carefully monitor the mower, carry out preventive inspections and replace its components, then the tool will last a very long time without any repairs.

The trimmer is simpler than its gasoline relative, therefore, it has fewer problems, but it still has:

  • Defective electrical cable;
  • Defective power outlet;
  • The plug has been damaged;
  • There is a problem with the control stick;
  • Burned out motor stator;
  • There was a break in the contact connection.

To detect the above problems, you can use an indicator screwdriver and a multimeter, and in most cases, you need a soldering iron to fix a breakdown.

If you follow the safety rules, including under no circumstances mowing damp grass with appliances powered by electricity, and refrain from mowing wet lawn with a gasoline mower, so as not to harm the plants, then the tools will last long enough.

Even though very little time has passed since the lawn was planted, and the grass is still difficult to compare with a dense green carpet, it is time to take care of the first mowing of the lawn. If the right moment is missed, some seedlings will outgrow or fall from the rain and then not rise. It is the mowing of the lawn that allows you to form a beautiful grass cover of optimal density, therefore it is so important to cut the grass on time and do it regularly.

The first mowing of the lawn should not be delayed due to the fact that the sprouting blades of grass still look very weak. it is scary to trample. In fact, trampling and rolling the lawn will only benefit him, the grass from this will begin to bush more, creating a dense sod. Yes, and you will step on the already mown grass, moving the lawn mower in front of you, so this will not cause any harm to the young lawn.

Let’s figure out when to start cutting the first seedlings, how often to mow during the season, and when is the last time to mow the lawn? Also from the article you will learn how to mow correctly in order to avoid common problems that beginners often face.

How to properly mow and cut grass on the lawn and lawn

How do you know when it’s time to mow your lawn for the first time? Usually the first lawn mow is in mid-May. Look at how much the blades of grass have grown: if they stretch up to 10 cm, then there is nowhere to put it further. Try to choose dry weather so that the grass is not wet (the mower will clog up), but the ground should remain slightly damp. Plants will uproot from dry soil, and it is not recommended to mow on wet soil because the lawn mower will damage the surface of the lawn when moving.

Before mowing the grass for the first time, make sure the mower blades are perfectly sharp so that weak blades of grass are not pulled out of the ground by the mower. You will only need to cut the very tops of the plants, so set the knives to their maximum height immediately.

Before mowing the grass for the first time, make sure the mower blades are perfectly sharp.

In the future, mowing the grass should be done at least once a week in warm, humid weather, and on cold or dry days, it will be enough to mow the lawn once every two weeks. Focus, first of all, on the height of the grass: the lawn looks neat at a height of five centimeters, if the grass has grown two centimeters higher, then it is time to mow it. It is advisable to keep your lawn at about the same height throughout the season, but mowing your lawn too short is not recommended during the summer months as the plants can dry out quickly.

READ  Briggs Lawnmower Oil Change

The last mowing of the lawn should be carried out before frost, excessively high or low grass will not overwinter well. Look according to the circumstances. perhaps the last time you mow the grass in mid-September, and in the case of a warm autumn, you may need to trim again in October.

The last haircut in autumn should not be done in a cold wind, otherwise the tips of the blades of grass will freeze

Here are a few rules to keep in mind when mowing your lawn:

  • First of all, make sure that the height is the same on both sides of the mower drum, otherwise you risk ruining the lawn;
  • Clear the area of ​​stones, sticks, wire and other debris that could harm the mower;
  • Sweep the surface of the lawn with a broom or rake to level the piles of earth after earthworms and raise the grass towards the blades;
  • Mark the direction of the haircut mentally. adjacent stripes should be obtained at a certain angle to each other;
  • Change the direction of the stripes with each mowing to perpendicular, then there will be no ribbed stripes on the lawn;
  • The last haircut in autumn should not be done in a cold wind, otherwise the tips of the blades of grass will be frostbitten, which will negatively affect the quality of the lawn next year.

Mowing grass with a lawnmower is not as easy as it sounds. Of course, you will need to learn how to operate the mower first before you start mowing your lawn. However, while working, you can accidentally make mistakes that will noticeably worsen the appearance of the lawn. The most common mistakes are:

If your area is prone to bumping, increase the cutting height and add mulch to level the lawn surface. When mowing, try not to push or jerk the mower handle back and forth.

When mowing, try not to push or jerk the mower handle back and forth.

This effect can be caused by blunt blades near the rotary mower (the blades of grass are jammed, not cut off), damage to the bottom plate of the cylindrical plate or its incorrect adjustment. Also, the grass can turn brown if it was wet during mowing.

If, when mowing, narrow strips of long and short grass appear perpendicular to the movement of the mower, this means that the blades in the cylindrical mower rotate very slowly. Resistance to knives can be caused by dew on the blades of grass (so you need to sweep the lawn before mowing), too low or too high cutting height.

How to mow a lawn

A similar “washboard effect” occurs when the grass is cut in the same direction every time. The same vibrations during lawn mowing result in waves on the soil surface, which is why it is so important to change the direction of the strips with each mow. To level the soil relief in the fall, you can add mulch.

The question arises: what to do with the cut grass. leave it on the lawn or clean it? On the one hand, cut plants can serve as an excellent fertilizer for the lawn, the nutrients from them will return back to the soil, the spread of moss will stop, and you will not have to spend time cleaning the grass from the lawn.

However, there is a downside to the coin: the mown grass will lead to the rapid appearance of weeds, the reproduction of earthworms, the surface of the lawn will acquire a porous structure and will be more susceptible to diseases, and the soil ventilation will deteriorate. Thus, it is better to remove the cut grass after cutting, it is recommended to leave it only in dry weather, so that the necessary moisture evaporates less from the lawn.

Mowing the lawn should be regular, then the plants will take a dwarf form

As for watering and feeding, they are necessary for the formation of a thick, high-quality cover, even if you have to mow the lawn more often due to the rapid growth of grass. It’s better to mow the grass more often and end up with a beautiful green surface without bald spots.

Mowing the lawn should be regular, then the plants will take a dwarf form and, instead of increasing the leaf mass, will form more and more new shoots, creating a dense turf. If you cut rarely and immediately shortly, the grass will weaken and begin to fall out, and in its place separate islands are formed, overgrown with weeds, yarrow, moss or bluegrass.

Permanently living in a private house, it is not difficult to follow a systematic lawn care schedule. Even in wet weather, wet grass can be cut with a lawn mower or trimmer a day later after it dries. It is much more difficult to take care of the natural grass in the summer cottage. Since visits fall on weekends, mowing also falls on these days. What to do if the weather is rainy?

The question of whether it is possible to mow wet grass with a trimmer or lawn mower is heard from summer residents very often. Opinions on this matter are radically different. Some argue that it is possible, citing as an example the old saying "Mow the scythe.". The second act with a categorical "No". So where, right? Who to believe?

To understand which trimmers can be used to cut wet grass, and which not, you should understand their device. Today, the consumer has two main types of lawn mowers:

Trim tabs, depending on the location of the engine, can be:

  • Top-mounted electric motor;
  • Bottom-mounted electric motor.

From the point of view of safety measures, mowing grass wet from rain or dew can only be done with a gasoline trimmer or a "Lithuanian". The use of electric lawn mowers is highly undesirable. Especially when it comes to instruments with a bottom engine, as they are in the area of ​​water ingress. As a result, a Short Circuit may occur.

Wet grass must also not be mowed with electric lawn mowers. The reason is the same as with trimmers with a lower location of the power unit. there is a high probability of a short circuit. In addition, there is a danger that, through negligence, you can accidentally cut the power wire supplying the unit.

If, nevertheless, there is a need to mow the grass in wet weather or through dew, then use the best carburetor lawn mowers and lawn mowers. It will be much safer for life and health.

  • Premature trimmer wear
  • Harming the lawn.

How can a lawn mower be disabled by cutting wet vegetation? Everything is very simple. It is displayed as a result of a short circuit when water enters the power compartment. In addition, even if everything is very well sealed, there is a good chance that the engine will not be able to handle the heavy load put on the flex trimmer shaft. And the shaft itself can turn. Such loads most often arise from the sticking of wet grass on the knives and on the spindle to which they are attached.

For trimmers with a gasoline engine, mowing the grass in wet weather, due to heavy loads, increases the degree of wear of the main components and assemblies. Here you can note the premature failure of the piston pair, as well as other moving parts. Most often, the piston pair fails due to engine overheating. In our case, the motor will overheat due to the load created by wet grass when mowing.

If you mow wet grass with a petrol trimmer, let the engine idle for 30 seconds without load to avoid overheating the engine. In this way, you will remove excess heat and save the piston pair.

  • Wet grass is very flexible and pulls to the ground;
  • Trimmer line is either too thick or round line is used.

In the first case, it is worth waiting for the vegetation to dry out. When dry, the grass always becomes harder. In the second case, it is worth replacing the fishing line with a thinner one or with a different profile. As practice shows, an even cut on wet grass can be obtained using profiled lines with a square or star section.

Those who at least once tried to mow the grass in the dew or in the drizzling rain noticed that the vegetation adhering to the knife and to the spindle is scattered in piles on the lawn. If they are not removed in time, then bald spots will appear on the lawn in places where wet grass falls. The cuttings begin to rot and the lawn begins to ache. This is how unsightly bald spots appear.

So, dear readers, decide for yourself whether it is possible to mow wet grass with a trimmer and a lawn mower, if you still want to put the lawn in order before the onset of cold weather.

Working with a trimmer is quite simple. easier than with an ordinary scythe. But everywhere there is its own specifics, therefore, before mastering a new technique, you should do what many leave for later. carefully read the instructions. This is already enough to roughly understand how to use the trimmer, fill it with fuel, figure out how to charge its battery or connect it to the mains.

Of the protective devices, the glasses and gloves recommended by the instructions do not interfere at all, but the most important is the protection of the legs. The cutting tool, especially when mowing with a gasoline trimmer with metal knives, rotating at huge speeds, picks up debris, pebbles and cuttings of vegetation, scattering at such a speed that they can injure a person. Therefore, it is advisable to work in trousers and closed shoes or boots.

What happens if you don’t protect your legs

As for ear protection, there is a tangible need for this only for the "loudest" petrol trimmer. based on a two-stroke engine. They are usually equipped with special headband headphones to reduce the sound pressure on the eardrum.

Preparing the trimmer for work begins with checking the condition of all parts and assembly according to the instructions. In doing so, you need to make sure that the gearbox is lubricated and there is enough oil in the crankcase of the four-stroke petrol trimmer. The fuel, depending on the type of engine, two- or four-stroke, is a mixture of gasoline with a special oil in a ratio of 40-50: 1 or, accordingly, pure gasoline. After the fuel tank is full, all that remains is to open the tap and you can try to start the trimmer, remembering that before you start mowing, you need it to idle for 2-3 minutes.

With an electric cordless tool, everything is simple. after checking the presence of lubricant, it is enough to insert a charged battery into the corresponding slot so that it is ready for use. If the tool is powered from the mains, then an extension cord will be required to the intended place of cutting. The wire must be located outside the range of possible action of the trimmer knives.

The site should be free of foreign objects as much as possible: glass, stones, wire, snags, etc. The presence of people closer than 15 meters is also undesirable. Depending on the capabilities of the particular trimmer and the work to be done, the appropriate cutting attachment must be selected. You can use a mowing head with a grass line, metal knives for weeds or hay, or a bush saw. The mowing should be planned so as to move away from buildings and people.

The trimmer should fit well in the hand. Many people prefer a fairly light tool that can be operated "on weight". Otherwise, it should be well balanced, on a comfortable strap or knapsack harness, as it will not work properly with the trimmer without this. A very convenient tool with a "bicycle" handle, which allows you to easily hold the mowing head at approximately constant height when mowing, and the tip of the cutting tool at the desired distance from the ground. In order for the line to serve longer, it is undesirable to bring it close to fences, curbs, brickwork and other solid objects. In addition, the head should not touch the ground unnecessarily.

How to choose a trimmer for a summer cottage? Which is better: gasoline or electric? Find out here.

As a rule, the cutting tool rotates counterclockwise, so you can work with the trimmer in the same way as with an oblique molding, making 1-2 strokes from right to left with a gradual advance of 15-30 cm. Then the cut grass remains on the treated surface on the left. Since the line cuts best with the tip, the swing speed and grip are chosen empirically. With fast wiring, the cut occurs with the entire length of the cutting tool, in this case the motor is unnecessarily overloaded, and the grass is more often wound around the head.

If the site is large and even, and the grass is soft enough, then it is more convenient to mow along imaginary squares, mentally breaking the entire area into them. Having previously mowed the grass along the perimeter of the first, they continue to work along a tapering square spiral clockwise until the site is completely mowed. Then proceed to the next square. With this method, the cut grass always remains on the treated surface on the left side. In order to mow vegetation to the very root, it is necessary to keep the cutting plane at an angle of 30 °, with the tip of the fishing line almost touching the ground.

Of course, flat lawns are best mowed with a trolley lawnmower, which allows you to make a smoother cut and collects the cut grass in a special grass catcher. The choice of such a lawn mower is described in this article.

In this case, it is more convenient to mow in both directions. The first pass is from left to right, cutting off the tops of the grass, and then, lowering the tool to the desired level, in the opposite motion, the lower part is cut. The cut grass also remains on the treated surface on the left side. If the thickets of weeds are too high, then in order to reduce the likelihood of the grass winding on the drum, you have to mow several times from top to bottom, but this is fraught with increased fishing line consumption.

The slope is also processed according to the principle of "cut grass to the left", choosing the direction so that its top is on the right. Having reached the end of the section, they return to the starting point, rise higher by the width of the stroke and mow the next strip.

On an area where there are many such obstacles, the trimmer is simply irreplaceable, since mowing the grass with an ordinary scythe is not enough scope, and the lawn mower is too large. For this, a fishing line is best suited. Before starting to process the site, it is required to mow each tree or bush from all sides. In order not to damage them, you need to hold the trimmer with a protective cover almost close to them, slightly tilting the head to the ground and bypassing from left to right.

It is convenient to cut flower beds, lawns and paths along the edges with a trimmer with a lower engine, since its cutting plane can be placed vertically. For an even greater effect on the cutting line, it is useful to dig a groove of about 4×4 cm. Then the line will cut the grass below ground level without touching its surface. The result is a very clean, blemish-free vertical haircut.

If there is a need to mow with a trimmer in any weather, then it definitely must be gasoline, since it tolerates wet weather well. Although, according to the instructions, work in the rain or on wet grass is also prohibited by some manufacturers of such gasoline equipment. When choosing a trimmer, this is also worth paying attention to.

The electric motor is the most vulnerable to moisture in battery trimmers. Accordingly, if it is located on top, then there is less chance of moisture getting there from the grass, but in rainy weather they also cannot work.

Most moisture sensitive AC powered trimmers.

Typically, water from wet grass enters the connectors of the extension cord, where an electric arc can occur that can ignite the insulating plastic or cause a short circuit. Such a defect is "corrected" by buying a new extension cord or replacing the plug, but moisture ingress on the engine or control circuit leads to irreversible failure of the trimmer. In addition, it is simply dangerous to work with such a tool in the rain, since there is a high probability of electric shock.

Petrol trimmers require extra care. In addition to cleaning and lubricating cutting and rubbing surfaces from plant sap and dirt, you also need to take care of the engine. The fastest way to get clogged is the air filter. Its cleaning frequency is about 10 hours. In addition, sometimes the fins of the engine cooling radiator become dirty, which is why it quickly overheats, and this can lead to its seizure. How to clean the radiator and air filter is described in the instructions for a specific gas trimmer.

Before leaving the trimmer for long-term storage at the end of the season, drain all fuel from the trimmer, then start the engine and wait until it stops. This ensures that there is no fuel in the reservoir and carburetor. After the engine has cooled down, unscrew the plug, pour 30–40 ml of two-stroke oil into the cylinder, slowly crank the crankshaft using the starter cable so that it is distributed over all cavities inside the engine, then screw the plug back into place. After that, you need to disassemble the bar, if it is disassembled, cover all metal parts that can rust with preservative grease and then store the trimmer in a place protected from moisture.

After finishing work, it is necessary to wipe and roll up the wires and extension cords for electric trimmers, and put the battery on charge for rechargeable trimmers, since it is not recommended to store the trimmer even for a very short time with a discharged battery. this leads to a quick failure. After that, you should remove the head, since you will have to clean both the protective casing and the inside of the drum itself. If this is not done, the herbal juice may dry out on them and cause the line reel to stop functioning properly the next time it is started.

It is much easier to prepare electric trimmers for long-term storage. The main thing is to protect them from moisture penetration into the control circuit and the engine, as well as from rust on unprotected metal elements with the help of a preservative lubricant. It is imperative to charge the battery before storing, then your trimmer will be as good as new in the spring.

How to professionally mow a lawn. A well-kept lawn adorns any home. An easy and cheap way to keep your lawn beautiful and healthy is to use a lawn mower. In addition to keeping your lawn in good condition, the mower also needs to be kept in good technical condition to be effective when mowing the lawn.

1. Make sure the mower is set to the correct cutting height. Different types of grass require different cutting heights. Determine the type of grass on your lawn before setting the cutting height on the mower.

2. Keep the mower in good technical condition. Even if you are not using your lawn mower, it is important to keep it in good working order throughout the year. Just like in a car, you need to be sure that all parts of your lawn mower are working correctly before mowing the lawn. If the mower blades are not sharpened, it can damage your lawn, leaving some of the grass unmown and susceptible to disease. Rule the grass to mow.

3. Try to mow your lawn when it’s not too hot outside. It is best to mow when there is morning dew on the grass. High temperatures can be very dangerous and must always be taken into account.

4. Check for debris on the lawn. Before mowing the lawn, it is important to check the grass for debris, any debris can damage the mower. You need to make two passes along the edge of the lawn. Don’t forget to block the aisles.

5. Try to mow the same area in the opposite direction each time. If this is not done, the lawn may be severely worn out or damaged in some places.

6. Use the trimmer to cut the grass around flower beds, trees, and wherever the mower cannot reach, to the same height as the mower (the trimmer may also be called a lawn mower, lawn mower, brush cutter or electric mower). Mow the grass. When mowing with a trimmer, you must be careful not to damage the bark of trees and not to hit the ground with the trimmer.

7. It is necessary to alternate the direction of mowing along and across, up and down, in different cross directions of the lawn. But remember that you can only mow with a lawn mower by pushing it forward and in no case should you pull the mower towards you. It might not be safe.

Try to keep the rpm and speed of the mower constant with the throttle valve. This will provide a smoother cut, longer engine life and lower fuel consumption.

After you cut the grass with a trimmer in places inaccessible to the lawn mower, you need to put on the trimmer nozzle "Kromkorez" and cut off all the edges of the beds and paths, and you also need to remove the grass growing from the cracks in the paths.

Do not overspeed while operating the lawn mower. If the mower is pushing at a high speed, you may not have time to react and bump into a tree stump, wire or stone in the grass.

Check that the cutting height on the mower is set to the recommended height for the type of grass on your lawn.

You can only mow the lawn when it is dry. If your lawn is wet from rain or watering, the mower may become clogged with wet grass or soil. In addition, driving the mower on a wet lawn can lead to soil compaction and lawn diseases. It can ruin the entire lawn.

When mowing with a trimmer, you should always wear safety glasses, as stones, glass, nails and other debris in the grass can fly out from under the working knife.

In case of any malfunction of the lawn mower knife, first of all, it must be muffled and the cap removed from the candle, and then the malfunction must be eliminated.

When mowing, keep children, animals, helpers and rotissoers at a safe distance from the mower or lawn mowers in operation. Their knives can injure passers-by if they get too close. One of the main rules to mow the grass.

Do not refuel the lawn mower or trimmer while the engine is still hot. There have been incidents of fire and explosion that have resulted in injury or injury. Always let the mower cool down.

"There is a dewdrop on each blade of grass., On every dewdrop there is a drop of dawn. Colored lights are burning on the grass. "/ V.Stepanov/

The lawn, like other garden plantings, loves attention and care. The grass does not develop quickly. it will take two or three years of intensive maintenance to get a beautiful lawn. You cannot use the lawn immediately after planting. the grass is young and rare. She needs water, sun and a proper haircut for good growth.

Mowing the lawn is very important to create dense grass. Grasses are essentially wild plants, nature has laid in them a tremendous power of life and recovery. When mowing, they form side shoots, the grass grows in breadth, forming sod.

The dense cover also prevents weeds from multiplying. While the grass is young and sparse, the weeds will have to be removed manually. This must be done so that the lawn does not gradually turn into thickets of dandelions, nettles and quinoa.

In the second year, weeding is required much less often: weeds cannot withstand frequent mowing of lawns and stop growing, and it is already difficult for them to break through the dense cover of overgrown grass.

If suddenly there was a problem, and the weeds began to prevail over the lawn grass, then you can use special selective herbicides. They will not damage the lawn, and they will easily destroy the weeds. "Lontrel", "Zenkor", "Lazurit" have proven themselves well. You can also use folk remedies: on a hot day, point-wise treat weeds with a solution of vinegar and liquid soap.

Lawn mowing must be carried out adhering to certain rules.

  • We mow for the first time as soon as the grass reaches 12-14 cm in height. The roots of young plantings are weak, they must be given the opportunity to grow and strengthen. In the future, the grass cover of a decorative and functional lawn can be mowed up to 4-7 cm.
  • The frequency of the haircut depends on many parameters, primarily on the weather conditions. If it rains often, the grass is actively growing, you will have to cut more often. If heat and drought are established, growth slows down and the lawn does not need mowing for a long time.
  • Cutting too low in drought is dangerous. the grass can burn out.
  • You cannot leave a heavily overgrown lawn for the winter. Plants will fall and it will be very difficult to restore its beauty in spring. We carry out the last mowing about two weeks before the first frost, so that the grass has time to grow a little and does not melt out during thaws.
  • If for some reason the grass has grown too much, we reduce the height in several steps.
  • Infrequent low mowing weakens the plants. It is better to mow more often while maintaining a constant height of the grass stand
  • Mowing wet grass is not recommended for many reasons. But some summer residents who get out to the site only on weekends sometimes have no other choice. In this case, at the very least, do not use a cordless electric lawnmower or electric trimmer, because Is it dangerous.

The following tools can be selected for mowing:

  • Lawn mowers
  • Trimmers and Lawn Mowers
  • Gardening scissors

A lawn mower is a wheeled gardening machine designed for mowing grass on level areas with simple geometry.

When choosing a lawn mower, you should pay attention to the most important parameters:

  • The presence and type of engine (electric, gasoline or battery), its power
  • Body material
  • Removable grass catcher
  • Cutting width
  • The presence of adjustment of the cutting height
  • Mulching function

Lawn mowers are electric, gasoline, mechanical. The mowing width and cutting power depend on the power of the lawn mower.

Electric lawn mowers up to 1.5 kW and petrol up to 2.5 l / s are suitable for small flat areas and lawns with soft young grass.

Electric lawn mowers from 1.5 kW to 2 kW and gasoline from 2.5 to 6 l / s are the best choice for areas with small differences in height, will overcome thick-stemmed plants and generally reduce the time and effort spent mowing the lawn. But their dimensions and cost will be much higher than less powerful copies.

Electric lawn mowers will be useful to owners of small lawn located. Electric lawn mowers have less power than petrol mowers. For their operation, it is necessary to stretch the 220 V power supply (extension cord) directly to the mowing place. Do not mow damp grass due to the high risk of electrical injury.

No cable is needed if the mower is running on battery power. This option is heavier in weight, but more mobile. Electric mowers with battery can run no more than 15-30 minutes.

Pros of electric lawn mowers:

  • Light weight and size
  • No need to stock up on gasoline and oil
  • Sustainability
  • Ease of use
  • Low noise level
  • Low price

Gasoline lawn mowers. Gasoline mowers are more difficult to handle. They require constant purchase of fuel and lubricants and maintenance. They are heavier in weight and generate more noise. But at the same time, their reliability is higher and for a large area it will be the best choice.

Pros of gasoline lawn mowers:

  • High performance and agility
  • Possibility of long-term and intensive use
  • When mowing wet grass, there is no risk of electric shock

Power lawn mowers are only powered by human muscles. They don’t have an engine at all. They are completely independent of energy sources, can be operated in any weather, are environmentally friendly and noiseless. Mechanical lawn mowing is time-consuming and physically demanding and is not suitable for tall grass.

  • Lawn area and its relief
  • Distance from power source
  • Ground cover type
  • Cutting frequency
  • The need to mow wet grass
  • The time you are willing to spend mowing the lawn
  • Effects of Lawn Mower Noise on Family and Neighbors
  • Your attitude to the environmental friendliness of technology
  • The presence of children and pets when mowing (risk of possible injury)
  • Who will mow (man, woman, child)

When buying a lawn mower, do not forget about its useful function as mulching. Mulch is the finely chopped grass that is scattered by the mower on the ground. Why mulching? Mulch is used as an affordable fertilizer. But it is not always useful. Do not mulch your lawn with a lawn mower in wet weather. Prolonged rains contribute to mulch decay and contamination of lawn grass with bacteria and fungi.

READ  How To Start A Stihl Petrol Mower

Even if your lawnmower is not equipped with this function, but simply collects the grass in a special compartment, you can benefit from it immensely. Sprinkle it under various plants in your garden or flowers. Mulch is perfect for cucumbers, tomatoes, cabbage. It will retain moisture and inhibit the development of weeds.

A trimmer is a mechanism that consists of a cutting tool, motor, and bar. You can only work with it while holding it in your hands. The trimmer is intended for mowing areas with high grass, uneven terrain, in hard-to-reach places and near plantings.

Better and more beautiful mowing on a flat area will be provided by a lawn mower. The trimmer is indispensable for large areas with dense grass. Equipped with a knife, it can cut even thin trees and bushes.

Trimmers are electric, battery and gasoline.

Suitable for mowing small lawns near the house. It is connected to a 220V network with an extension cord. Such a trimmer is lightweight and even a woman can handle it. As a rule, electric trimmers are inexpensive and low in power. But they are very convenient for mowing paths near the house, benches, small lawns surrounded by flower beds, areas near trees or shrubs. The downside is that the cut grass will have to be collected by hand, as well as in a cord (extension cord), which creates some inconvenience when working.

Pluses of an electric trimmer:

  • Environmental friendliness (no exhaust fumes)
  • Light weight
  • No gasoline or oil required
  • Low noise
  • Getting started with ease

These trimmers are battery operated. They do not have a cord, but the battery charge is limited and only a small area can be mowed with such a tool at a time.

With a gasoline engine. Petrol trimmers (lawn mowers) are more powerful because of the fuel tank and weigh more than their electric counterparts. To work with them, you have to spend more physical effort, and not everyone can start a gasoline trimmer the first time. To prime the trimmer, you need to learn how to mix gasoline and oil in the correct proportion (for trimmers with a two-stroke engine). The environmental friendliness of this tool is very low and the noise level is high. But it often happens that only a petrol trimmer can handle the job.

Pros of a petrol trimmer:

  • Not tied to a power source, which means it is highly mobile
  • Can mow wet grass
  • High power, long service life
  • Handles tough tall grasses and bushes
  • Low probability of engine overheating

Types of engine for a gasoline trimmer. Gas trimmers can be equipped with different engines. two-stroke or four-stroke. Each of them has its own pros and cons. The presence of a certain type of engine does not directly affect the trimmer class and its power. Trimmers with two-stroke engines are most demanded by buyers due to their low price.

Engine typeTwo-strokeFour-stroke
Refuelingit is necessary to mix gasoline and oil in a certain proportionseparate containers for gasoline and oil
Noisestrongweak
Traffic fumeslotfew
The costlowhigh
Designsimplecomplex
Trimmer weighteasyheavy
Motor resourcelittlebig

Choosing a trimmer cutting system:

  • Fishing line. The most common option. The line can be of different thicknesses and sections. When choosing, it is better to follow the manufacturer’s instructions. The line is wound on a special spool at the bottom of the trimmer. Suitable for mowing soft grass.
  • Knife. The presence of a knife can be a primary or additional function. The knife will do well on rough, thick stems of plants. Choose a knife if your lawn is heavily overgrown with weeds and tall grass.

A lawn cutter is a small hand-held tool for cutting a small or hard-to-reach area where a trimmer or lawnmower cannot be used. They come in handy if you need to carefully trim the grass along the path, along the edge of the lawn, between tiles, or near other plants. The scissor blades are parallel to the ground and can be rotated. Lawn cutters can be battery powered or mechanical. Battery life depends on battery capacity.

Taking care of your lawn using the right tool will not take long, and the result will be great. Juicy greenery will delight you and delight your neighbors. A beautiful lawn is a great place for outdoor recreation and children’s games!

The petrol trimmer is considered a type of lawn mower, and belongs to the group of agricultural hand tools, specialized for the implementation of works on mowing vegetation. Today, lawn mowers are taking pride of place in the field maintenance trade. Not surprising, because the best cost and high level of productivity cannot leave a significant part of people indifferent.

Various manufacturers have shown for consideration a huge number of technology in this direction. The article will talk about the advantages and use of a gasoline trimmer.

In order to lay out the whole trimmer system on the shelves, it is rational to divide the device into its 3 components: motor, drive components and control concept.

Petrol trimmers are difficult and cumbersome, and for this reason, manufacturers are extremely thoughtful about the organization of management. In order to remove the load from the hands, a shoulder strap is taken into account. The user’s hands control the barbell due to the bicycle-style handle. It is able to adjust the height of the boom, which is very comfortable. In this version of the device, the motor is placed behind the user, and the cutting component very simply rushes in the right direction to the required height.

The most significant control components are the throttle and clutch triggers. They are located on the right handle and mate with the clutch attachments.

But what the petrol interskol trimmer looks like and how it can be used is indicated

The principle of operation of any type of gasoline trimmer is similar (about the types of trimmer will be described below). At one end of the trimmer there is a working part in the form of a screw-shaped knife, fishing line. At the other end there is a tank for fuel with oil and buttons for control. For the work of a gasoline trimmer, the composition of fuel and oil is used. When the device is filled with gasoline, the start buttons are pressed on the control panel and in a similar way, the trimmer activates the cutting element.

On. petrol grass trimmer:

One of the trimmer functions is the practical starting of the motor with a special spring starter. Numerous modifications of the device allow changing nozzles, which positively affects the efficient operation of the device, especially for owners of areas with a high vegetation rate.

An important element of the device is the anti-vibration system, which reduces the stress on the joints of the shoulder and hand. It is very bad when there is no such function in the device, because during the work the person will quickly get tired and the limbs will hurt. But what is the best gasoline grass trimmer and by what parameters to choose it, this will help to understand

In order to figure out which gasoline trimmer is the best, the main thing is to decide for what purposes you want to use it.

For example, if you need to care for the lawn of a large area, it is more correct to select a high-end model with great power. It is also important to consider the type of grass, including the thickness of the stem.

The type of motor of the device directly depends on the capabilities and costs of fuel (the stronger it is, the greater the range of capabilities of the device and the more it will spend fuel).

  • The motor has two configurations. two-stroke and four-stroke. The first option is cheaper, however, it is not easy to maintain, since fuel and oil must be combined. The engine will not work for a long time. The four-stroke engine is more expensive than the 1st type. It is expensive in terms of service, however, in order to drive the motor, you should not combine the two fluid options, since 2 separate tanks are taken into account. Fuel is poured into one tank and oil into the other. During operation, a four-stroke engine produces less hum and emissions than a two-stroke engine. But how to use a gasoline manual lawnmower and what its price is, you can see
  • The working part of the device contains two types. a screw knife or a thread. The spiral blade is a strong cutting component that cuts not only grass, but bushes and small trees. For this reason, when selecting a device, you need to navigate in models directly with a cutting component. With respect to the line, which contains a minimum period in action, it is more economical and harmless.
  • The trimmer handle is similar to the steering wheel of a bicycle, which includes keys to control operation. When choosing a device, look at the placement of the buttons. For example, in a device for domestic use, the buttons are located comfortably on the bar. In other types of device, the control panel is located on the handle.

Handle sample for a petrol grass trimmer

  • Cutting width is an indicator that affects productivity. Therefore, the larger the width, the higher the performance. However, it should be emphasized that in the case when the device is necessary for daily work, for example, near trees, bushes, walls of a house, near a fence, then it is preferable to purchase a mechanism with the smallest width.
  • Also look at the size of the gas tank. Here you need to learn that the larger it is, the less often you need to refuel again.
  • When choosing a trimmer for a garden, in addition to mastering the performance characteristics, you need to take into account the following specifics of the device: small weight, comfort in use (for long-term holding in hands, including the shoulder girdle), convenience in terms of saving and transportation.

    For men, any modification is acceptable (the main, suitable device for height), and when a girl or an elderly person works with the device, the mass contains the main value.

    When using the trimmer, move it regularly and hold it well. Thus, the type of handle is considered a significant selection argument. Most of the devices are equipped with a mechanical line feed system. They have a T-like handle. This model makes it possible to dispose of the device with 2 handles. It is very comfortable when cutting large areas.

    When choosing a gasoline trimmer, you need to take into account the types of device:

    Timely cutting of the grass is a guarantee of a beautiful lawn and a well-groomed backyard area. In order to facilitate and speed up the activity, it is recommended to purchase a gasoline trimmer, the price of which depends on its characteristics and manufacturer.

    Known modifications include:

    Weight 7 kilograms, power 1.1 l / s., Mowing width 26 cm, tank size 0.7 l, average cost 7 thousand rubles;

    Weight 7.4 kilograms, power 1.7 l / s., Mowing width 25 cm, average cost 7 thousand rubles;

    Weight 7 kilograms, power 1.8 l / sec., Cutting width 42 cm, tank size 0.95 l, average cost 8 thousand rubles;

    Often used for growing thick plants Good quality professional equipment

    Weight 4.1 kilograms, power 1 l / s., Tank size 0.3 liters, average cost 13 thousand rubles;

    Power 2 l / s., Tank size 1 l, mowing width 40 cm, average cost 25 thousand rubles;

    Weight 5.8 kilograms, power 1.4 l / s., Tank size 0.53 l, average cost 33 thousand rubles.

    But how to use it and how effective this tool is.

    From the point of view of technical harmlessness, it is possible to mow grass soaked from rain or dew only with a gasoline trimmer or a "Lithuanian". For example, if the device contains a bottom motor, water may enter the device. This could result in a short circuit. It is not recommended to mow the grass during the rainy season and devices with the upper location of the motor, since in addition a person can get an electric shock.

    For petrol trimmers, cutting wet grass increases the wear on key components as a result of heavy use. It is possible to highlight the early failure of the piston pair.

    It will also be useful to learn about what are

    Why you can’t cut wet grass with a trimmer

    Living in a private house on a daily basis, it is not difficult to follow a periodic lawn care schedule. Even in wet weather, wet grass can be cut with a lawn mower or trimmer a day later after it dries. It is even more difficult to take care of the natural grass in the summer cottage. Since visits fall on weekends, mowing also falls on these days. What to do if the weather is rainy?

    The question of whether it is possible to mow wet grass with a trimmer or lawn mower is often heard from summer residents. Views on this matter are radically different. Some say that it is possible, citing as an example the old saying "Mow the scythe.". The second act with a categorical "No". So where, right? Whom to believe?

    In order to realize which trimmers can be used to mow wet grass, and which not, you should understand their device. Today, the consumer has two main types of lawn mowers:

    Trim tabs, depending on the location of the engine, can be:

    • Top-mounted electric motor;
    • Bottom-mounted electric motor.

    Proceeding from the convictions of safety precautions, mowing grass wet from rain or dew can only be done with a gasoline trimmer or "Lithuanian". Why you can’t mow wet grass. The introduction of electronic lawn mowers is very unnecessary. Especially when it comes to devices with a lower motor, because they are in the area of ​​water ingress. As a result, Kutsei Closure can occur.

    Wet grass should also not be mowed with electric lawn mowers. The reason is the same as with the trimmers with a lower position of the unit. the possibility of short-circuiting is great. In addition, there is a danger that, if you are not vigilant, you can accidentally cut the power wire that supplies the unit.

    If, nevertheless, there is a need to mow the grass in wet weather or through dew, then use the best carburetor lawn mowers and lawn mowers. It will be even safer for life and health.

    There are also indirect prerequisites for why it is impossible to mow grass wet from dew or rain on a personal plot. Why is it better to mow the grass and then when working with a trimmer of such a flow. These include:

    • Early wear on the trimmer;
    • Harming the lawn.

    How can you disable a lawn mower by mowing wet vegetation? It’s simple. It is displayed as a result of a short circuit when water enters the power compartment. In addition, even if everything is very well sealed, there is a great possibility that the engine will not be able to withstand the heavy load put on the flexible trimmer shaft. Well, the shaft itself can turn. Such loads in most cases appear from the sticking of wet grass on the knives and on the spindle to which they are attached.

    In trimmers with a gasoline engine, mowing grass in wet weather, due to huge loads, increases the wear rate of the main components and assemblies. Here we can note the early failure of the piston pair, as well as other moving units. In most cases, the piston pair fails due to overheating of the motor. In our case, the motor will overheat from the load created by wet grass when mowing.

    If you are mowing wet grass with a petrol trimmer, let the engine idle for 30 seconds without load to avoid overheating of the engine. In this way, you remove excess heat and save the piston pair.

    Many probably noticed that if you cut wet grass with a trimmer, then the cut comes out ragged. In the future, it dries up, and the grass itself begins to turn yellow. This can happen for several reasons:

    • Wet grass is very elastic and pulls it towards the ground;
    • Trimmer line is either very thick or round line is used.

    In the first case, it is worth waiting for the vegetation to dry out. When dry, the grass always becomes harder. In the second case, it is worth changing the line to a narrower one or with a different profile. As practice indicates, a smooth cut on wet grass can be obtained using profiled lines with a square or star section.

    Those who have at least once tried to mow the grass in the dew or in the drizzling rain noticed that the vegetation adhering to the knife and the spindle is scattered in piles on the lawn. If they are not removed just right, then in places where the wet grass falls on the lawn, bald spots appear. The cuttings begin to rot and the lawn begins to ache. This is how unsightly bald spots appear.

    So, dear readers, decide for yourself whether it is possible to mow wet grass with a trimmer and a lawn mower, if you still want to put the lawn in order before the onset of cold weather.

    Working with a trimmer is quite easy. easier than a conventional side-trimmer. But everywhere there is its specificity, therefore, before mastering the latest technology, you should do what many leave for later. read the annotation carefully. This is already enough to roughly understand how to use the trimmer, fill it with fuel, figure out how to charge its battery or connect it to the mains.

    Of the protective devices, the glasses and gloves recommended by the annotation will not interfere at all, but protection of the legs is more important. The cutting tool, especially when mowing with a gasoline trimmer with metal knives, spinning at tremendous speed, picks up debris, stones and cuttings of vegetation, scattering at such a speed that they can injure a person. Therefore, it is better to work in pants and closed shoes or boots.

    What happens if you don’t protect your legs

    As for ear protection, there is a tangible need for this only for the "loudest" petrol trimmer. based on a two-stroke engine. They are usually equipped with special headband headphones to reduce the sound pressure on the eardrum.

    Preparing the trimmer for work begins with checking the condition of all parts and assembly according to the instructions. In doing so, you need to make sure that the gearbox is lubricated and there is enough oil in the crankcase of the four-stroke petrol trimmer. The fuel, depending on the type of engine, two- or four-stroke, is a mixture of gasoline with a special oil in a ratio of 40-50: 1 or, accordingly, pure gasoline. After the fuel tank is full, all that remains is to open the tap and you can try to start the trimmer, remembering that before you start mowing, you need it to idle for 2-3 minutes.

    With an electric cordless tool, everything is simple. after checking the presence of lubricant, it is enough to insert a charged battery into the corresponding slot so that it is ready for use. If the tool is powered from the mains, then an extension cord will be required to the intended place of cutting. The wire must be located outside the range of possible action of the trimmer knives.

    The site should be free of foreign objects as much as possible: glass, stones, wire, snags, etc. The presence of people closer than 15 meters is also undesirable. Depending on the capabilities of the particular trimmer and the work to be done, the appropriate cutting attachment must be selected. You can use a mowing head with a grass line, metal knives for weeds or hay, or a bush saw. The mowing should be planned so as to move away from buildings and people.

    The trimmer should fit well in the hand. Many people prefer a fairly light tool that can be operated "on weight". Otherwise, it should be well balanced, on a comfortable strap or knapsack harness, as it will not work properly with the trimmer without this. A very convenient tool with a "bicycle" handle, which allows you to easily hold the mowing head at approximately constant height when mowing, and the tip of the cutting tool at the desired distance from the ground. In order for the line to serve longer, it is undesirable to bring it close to fences, curbs, brickwork and other solid objects. In addition, the head should not touch the ground unnecessarily.

    How to choose a trimmer for a summer cottage? Which is better: gasoline or electric? Find out here.

    As a rule, the cutting tool rotates counterclockwise, so you can work with the trimmer in the same way as with an oblique molding, making 1-2 strokes from right to left with a gradual advance of 15-30 cm. Then the cut grass remains on the treated surface on the left. Since the line cuts best with the tip, the swing speed and grip are chosen empirically. With fast wiring, the cut occurs with the entire length of the cutting tool, in this case the motor is unnecessarily overloaded, and the grass is more often wound around the head.

    If the site is large and even, and the grass is soft enough, then it is more convenient to mow along imaginary squares, mentally breaking the entire area into them. Having previously mowed the grass along the perimeter of the first, they continue to work along a tapering square spiral clockwise until the site is completely mowed. Then proceed to the next square. With this method, the cut grass always remains on the treated surface on the left side. In order to mow vegetation to the very root, it is necessary to keep the cutting plane at an angle of 30 °, with the tip of the fishing line almost touching the ground.

    We combine the attachment with knives and a spool with a fishing line for cutting woody grass with a lawn mower.

    The nuances of working as a lawn mower for a good lawn mowing and other purposes are described. My personal experience. My pages:.

    Of course, flat lawns are best mowed with a trolley lawnmower, which allows you to make a smoother cut and collects the cut grass in a special grass catcher. The choice of such a lawn mower is described in this article.

    In this case, it is more convenient to mow in both directions. The first pass is from left to right, cutting off the tops of the grass, and then, lowering the tool to the desired level, in the opposite motion, the lower part is cut. The cut grass also remains on the treated surface on the left side. If the thickets of weeds are too high, then in order to reduce the likelihood of the grass winding on the drum, you have to mow several times from top to bottom, but this is fraught with increased fishing line consumption.

    The slope is also processed according to the principle of "cut grass to the left", choosing the direction so that its top is on the right. Having reached the end of the section, they return to the starting point, rise higher by the width of the stroke and mow the next strip.

    On an area where there are many such obstacles, the trimmer is simply irreplaceable, since mowing the grass with an ordinary scythe is not enough scope, and the lawn mower is too large. For this, a fishing line is best suited. Before starting to process the site, it is required to mow each tree or bush from all sides. In order not to damage them, you need to hold the trimmer with a protective cover almost close to them, slightly tilting the head to the ground and bypassing from left to right.

    It is convenient to cut flower beds, lawns and paths along the edges with a trimmer with a lower engine, since its cutting plane can be placed vertically. For an even greater effect on the cutting line, it is useful to dig a groove of about 4×4 cm. Then the line will cut the grass below ground level without touching its surface. The result is a very clean, blemish-free vertical haircut.

    If there is a need to mow with a trimmer in any weather, then it definitely must be gasoline, since it tolerates wet weather well. Although, according to the instructions, work in the rain or on wet grass is also prohibited by some manufacturers of such gasoline equipment. When choosing a trimmer, this is also worth paying attention to.

    The electric motor is the most vulnerable to moisture in battery trimmers. Accordingly, if it is located on top, then there is less chance of moisture getting there from the grass, but in rainy weather they also cannot work.

    Most moisture sensitive AC powered trimmers.

    Typically, water from wet grass enters the connectors of the extension cord, where an electric arc can occur that can ignite the insulating plastic or cause a short circuit. Such a defect is "corrected" by buying a new extension cord or replacing the plug, but moisture ingress on the engine or control circuit leads to irreversible failure of the trimmer. In addition, it is simply dangerous to work with such a tool in the rain, since there is a high probability of electric shock.

    Petrol trimmers require extra care. In addition to cleaning and lubricating cutting and rubbing surfaces from plant sap and dirt, you also need to take care of the engine. The fastest way to get clogged is the air filter. Its cleaning frequency is about 10 hours. In addition, sometimes the fins of the engine cooling radiator become dirty, which is why it quickly overheats, and this can lead to its seizure. How to clean the radiator and air filter is described in the instructions for a specific gas trimmer.

    Before leaving the trimmer for long-term storage at the end of the season, drain all fuel from the trimmer, then start the engine and wait until it stops. This ensures that there is no fuel in the reservoir and carburetor. After the engine has cooled down, unscrew the plug, pour 30–40 ml of two-stroke oil into the cylinder, slowly crank the crankshaft using the starter cable so that it is distributed over all cavities inside the engine, then screw the plug back into place. After that, you need to disassemble the bar, if it is disassembled, cover all metal parts that can rust with preservative grease and then store the trimmer in a place protected from moisture.

    After finishing work, it is necessary to wipe and roll up the wires and extension cords for electric trimmers, and put the battery on charge for rechargeable trimmers, since it is not recommended to store the trimmer even for a very short time with a discharged battery. this leads to a quick failure. After that, you should remove the head, since you will have to clean both the protective casing and the inside of the drum itself. If this is not done, the herbal juice may dry out on them and cause the line reel to stop functioning properly the next time it is started.

    It is much easier to prepare electric trimmers for long-term storage. The main thing is to protect them from moisture penetration into the control circuit and the engine, as well as from rust on unprotected metal elements with the help of a preservative lubricant. It is imperative to charge the battery before storing, then your trimmer will be as good as new in the spring.

    How to professionally mow a lawn. A well-kept lawn adorns any home. An easy and cheap way to keep your lawn beautiful and healthy is to use a lawn mower. In addition to keeping your lawn in good condition, the mower also needs to be kept in good technical condition to be effective when mowing the lawn.

    1. Make sure the mower is set to the correct cutting height. Different types of grass require different cutting heights. Determine the type of grass on your lawn before setting the cutting height on the mower.

    2. Keep the mower in good technical condition. Even if you are not using your lawn mower, it is important to keep it in good working order throughout the year. Just like in a car, you need to be sure that all parts of your lawn mower are working correctly before mowing the lawn. If the mower blades are not sharpened, it can damage your lawn, leaving some of the grass unmown and susceptible to disease. Rule the grass to mow.

    3. Try to mow your lawn when it’s not too hot outside. It is best to mow when there is morning dew on the grass. High temperatures can be very dangerous and must always be taken into account.

    4. Check for debris on the lawn. Before mowing the lawn, it is important to check the grass for debris, any debris can damage the mower. You need to make two passes along the edge of the lawn. Don’t forget to block the aisles.

    5. Try to mow the same area in the opposite direction each time. If this is not done, the lawn may be severely worn out or damaged in some places.

    6. Use the trimmer to cut the grass around flower beds, trees, and wherever the mower cannot reach, to the same height as the mower (the trimmer may also be called a lawn mower, lawn mower, brush cutter or electric mower). For safety reasons, mowing wet grass can only be done with a gasoline trimmer or a scythe. Mow the grass. When mowing with a trimmer, you must be careful not to damage the bark of trees and not to hit the ground with the trimmer.

    After you cut the grass with a trimmer in places inaccessible to the lawn mower, you need to put on the trimmer nozzle "Kromkorez" and cut off all the edges of the beds and paths, and you also need to remove the grass growing from the cracks in the paths.

    Do not overspeed while operating the lawn mower. If the mower is pushing at a high speed, you may not have time to react and bump into a tree stump, wire or stone in the grass.

    Check that the cutting height on the mower is set to the recommended height for the type of grass on your lawn.

    You can only mow the lawn when it is dry. If your lawn is wet from rain or watering, the mower may become clogged with wet grass or soil. In addition, driving the mower on a wet lawn can lead to soil compaction and lawn diseases. It can ruin the entire lawn.

    READ  What Gasoline Is Needed For A Lawn Mower

    When mowing with a trimmer, you should always wear safety glasses, as stones, glass, nails and other debris in the grass can fly out from under the working knife.

    In case of any malfunction of the lawn mower knife, first of all, it must be muffled and the cap removed from the candle, and then the malfunction must be eliminated.

    When mowing, keep children, animals, helpers and rotissoers at a safe distance from the mower or lawn mowers in operation. Their knives can injure passers-by if they get too close. One of the main rules to mow the grass.

    Do not refuel the lawn mower or trimmer while the engine is still hot. There have been incidents of fire and explosion that have resulted in injury or injury. Always let the mower cool down.

    "There is a dewdrop on each blade of grass., On every dewdrop there is a drop of dawn. Colored lights are burning on the grass. "/ V.Stepanov/

    The lawn, like other garden plantings, loves attention and care. The grass does not develop quickly. it will take two or three years of intensive maintenance to get a beautiful lawn. You cannot use the lawn immediately after planting. the grass is young and rare. She needs water, sun and a proper haircut for good growth.

    Mowing the lawn is very important to create dense grass. Grasses are essentially wild plants, nature has laid in them a tremendous power of life and recovery. When mowing, they form side shoots, the grass grows in breadth, forming sod.

    The dense cover also prevents weeds from multiplying. While the grass is young and sparse, the weeds will have to be removed manually. This must be done so that the lawn does not gradually turn into thickets of dandelions, nettles and quinoa.

    In the second year, weeding is required much less often: weeds cannot withstand frequent mowing of lawns and stop growing, and it is already difficult for them to break through the dense cover of overgrown grass.

    If suddenly there was a problem, and the weeds began to prevail over the lawn grass, then you can use special selective herbicides. They will not damage the lawn, and they will easily destroy the weeds. "Lontrel", "Zenkor", "Lazurit" have proven themselves well. You can also use folk remedies: on a hot day, point-wise treat weeds with a solution of vinegar and liquid soap.

    Lawn mowing must be carried out adhering to certain rules.

    • We mow for the first time as soon as the grass reaches 12-14 cm in height. The roots of young plantings are weak, they must be given the opportunity to grow and strengthen. In the future, the grass cover of a decorative and functional lawn can be mowed up to 4-7 cm.
    • The frequency of the haircut depends on many parameters, primarily on the weather conditions. If it rains often, the grass is actively growing, you will have to cut more often. If heat and drought are established, growth slows down and the lawn does not need mowing for a long time.
    • Cutting too low in drought is dangerous. the grass can burn out.
    • You cannot leave a heavily overgrown lawn for the winter. Plants will fall and it will be very difficult to restore its beauty in spring. We carry out the last mowing about two weeks before the first frost, so that the grass has time to grow a little and does not melt out during thaws.
    • If for some reason the grass has grown too much, we reduce the height in several steps.
    • Infrequent low mowing weakens the plants. It is better to mow more often while maintaining a constant height of the grass stand
    • Mowing wet grass is not recommended for many reasons. But some summer residents who get out to the site only on weekends sometimes have no other choice. In this case, at the very least, do not use a cordless electric lawnmower or electric trimmer, because Is it dangerous.

    The following tools can be selected for mowing:

    • Lawn mowers
    • Trimmers and Lawn Mowers
    • Gardening scissors

    A lawn mower is a wheeled gardening machine designed for mowing grass on level areas with simple geometry.

    When choosing a lawn mower, you should pay attention to the most important parameters:

    • The presence and type of engine (electric, gasoline or battery), its power
    • Body material
    • Removable grass catcher
    • Cutting width
    • The presence of adjustment of the cutting height
    • Mulching function

    Lawn mowers are electric, gasoline, mechanical. The mowing width and cutting power depend on the power of the lawn mower.

    Electric lawn mowers up to 1.5 kW and petrol up to 2.5 l / s are suitable for small flat areas and lawns with soft young grass.

    Electric lawn mowers from 1.5 kW to 2 kW and gasoline from 2.5 to 6 l / s are the best choice for areas with small differences in height, will overcome thick-stemmed plants and generally reduce the time and effort spent mowing the lawn. But their dimensions and cost will be much higher than less powerful copies.

    Electric lawn mowers will be useful to owners of small lawn located. Electric lawn mowers have less power than petrol mowers. For their operation, it is necessary to stretch the 220 V power supply (extension cord) directly to the mowing place. Do not mow damp grass due to the high risk of electrical injury.

    No cable is needed if the mower is running on battery power. This option is heavier in weight, but more mobile. Electric mowers with battery can run no more than 15-30 minutes.

    Pros of electric lawn mowers:

    • Light weight and size
    • No need to stock up on gasoline and oil
    • Sustainability
    • Ease of use
    • Low noise level
    • Low price

    Gasoline lawn mowers. Gasoline mowers are more difficult to handle. They require constant purchase of fuel and lubricants and maintenance. They are heavier in weight and generate more noise. But at the same time, their reliability is higher and for a large area it will be the best choice.

    Pros of gasoline lawn mowers:

    • High performance and agility
    • Possibility of long-term and intensive use
    • When mowing wet grass, there is no risk of electric shock

    Power lawn mowers are only powered by human muscles. They don’t have an engine at all. They are completely independent of energy sources, can be operated in any weather, are environmentally friendly and noiseless. Mechanical lawn mowing is time-consuming and physically demanding and is not suitable for tall grass.

    • Lawn area and its relief
    • Distance from power source
    • Ground cover type
    • Cutting frequency
    • The need to mow wet grass
    • The time you are willing to spend mowing the lawn
    • Effects of Lawn Mower Noise on Family and Neighbors
    • Your attitude to the environmental friendliness of technology
    • The presence of children and pets when mowing (risk of possible injury)
    • Who will mow (man, woman, child)

    When buying a lawn mower, do not forget about its useful function as mulching. Mulch is the finely chopped grass that is scattered by the mower on the ground. Why mulching? Mulch is used as an affordable fertilizer. But it is not always useful. Do not mulch your lawn with a lawn mower in wet weather. Prolonged rains contribute to mulch decay and contamination of lawn grass with bacteria and fungi.

    Even if your lawnmower is not equipped with this function, but simply collects the grass in a special compartment, you can benefit from it immensely. Sprinkle it under various plants in your garden or flowers. Mulch is perfect for cucumbers, tomatoes, cabbage. It will retain moisture and inhibit the development of weeds.

    A trimmer is a mechanism that consists of a cutting tool, motor, and bar. You can only work with it while holding it in your hands. The trimmer is intended for mowing areas with high grass, uneven terrain, in hard-to-reach places and near plantings.

    Better and more beautiful mowing on a flat area will be provided by a lawn mower. The trimmer is indispensable for large areas with dense grass. Equipped with a knife, it can cut even thin trees and bushes.

    Trimmers are electric, battery and gasoline.

    Suitable for mowing small lawns near the house. It is connected to a 220V network with an extension cord. Such a trimmer is lightweight and even a woman can handle it. As a rule, electric trimmers are inexpensive and low in power. But they are very convenient for mowing paths near the house, benches, small lawns surrounded by flower beds, areas near trees or shrubs. The downside is that the cut grass will have to be collected by hand, as well as in a cord (extension cord), which creates some inconvenience when working.

    Pluses of an electric trimmer:

    • Environmental friendliness (no exhaust fumes)
    • Light weight
    • No gasoline or oil required
    • Low noise
    • Getting started with ease

    These trimmers are battery operated. They do not have a cord, but the battery charge is limited and only a small area can be mowed with such a tool at a time.

    With a gasoline engine. Petrol trimmers (lawn mowers) are more powerful because of the fuel tank and weigh more than their electric counterparts. To work with them, you have to spend more physical effort, and not everyone can start a gasoline trimmer the first time. To prime the trimmer, you need to learn how to mix gasoline and oil in the correct proportion (for trimmers with a two-stroke engine). The environmental friendliness of this tool is very low and the noise level is high. But it often happens that only a petrol trimmer can handle the job.

    Pros of a petrol trimmer:

    • Not tied to a power source, which means it is highly mobile
    • Can mow wet grass
    • High power, long service life
    • Handles tough tall grasses and bushes
    • Low probability of engine overheating

    Types of engine for a gasoline trimmer. Gas trimmers can be equipped with different engines. two-stroke or four-stroke. Each of them has its own pros and cons. The presence of a certain type of engine does not directly affect the trimmer class and its power. Trimmers with two-stroke engines are most demanded by buyers due to their low price.

    Engine typeTwo-strokeFour-stroke
    Refuelingit is necessary to mix gasoline and oil in a certain proportionseparate containers for gasoline and oil
    Noisestrongweak
    Traffic fumeslotfew
    The costlowhigh
    Designsimplecomplex
    Trimmer weighteasyheavy
    Motor resourcelittlebig

    Choosing a trimmer cutting system:

    • Fishing line. The most common option. The line can be of different thicknesses and sections. When choosing, it is better to follow the manufacturer’s instructions. The line is wound on a special spool at the bottom of the trimmer. Suitable for mowing soft grass.
    • Knife. The presence of a knife can be a primary or additional function. The knife will do well on rough, thick stems of plants. Choose a knife if your lawn is heavily overgrown with weeds and tall grass.

    A lawn cutter is a small hand-held tool for cutting a small or hard-to-reach area where a trimmer or lawnmower cannot be used. They come in handy if you need to carefully trim the grass along the path, along the edge of the lawn, between tiles, or near other plants. The scissor blades are parallel to the ground and can be rotated. Lawn cutters can be battery powered or mechanical. Battery life depends on battery capacity.

    Taking care of your lawn using the right tool will not take long, and the result will be great. Juicy greenery will delight you and delight your neighbors. A beautiful lawn is a great place for outdoor recreation and children’s games!

    To create a lawn covering on your summer cottage is still half the battle. The most important thing is to preserve it and give it a chic look. The main step in maintaining its beauty is mowing the lawn.

    Just as it is important for French women that after cutting the hair on their heads, every hair should lie perfectly, so for the English lords it is necessary that every blade of grass should be perfect on the lawn. We create lawn coverings, while trying to be like prim British in everything, which means it’s time to learn how to mow lawns correctly.

    Mowing a lawn is not only needed to give it an aesthetic look. This procedure serves many practical purposes:

    • The grass begins to bush more.
    • Young shoots grow and develop.
    • Mowing prevents depletion of lawn plants.
    • Mowing delays lawn flowering.
    • The growing season is extended.
    • A dense sod appears, which prevents the appearance of weeds and even sometimes contributes to their displacement.

    A completely natural question arises. how and what is the best way to do this?

    All existing lawn mowers differ in the type of control, engine and cutting elements, design and other factors. Consider the most basic and popular.

    These devices differ from all others in that they do not have an engine. They are pretty simple. In fact, the entire mechanism consists of two wheels, and a fixed knife is rigidly fixed between them. Above this knife is a drum with steel blades, which starts to rotate as the wheels move.

    How does a manual lawnmower work:

    • The person sets up the device in front of him and begins to make pushing movements;
    • At the same time, a rotary movement from the wheels begins to come to the blade unit installed in the mechanism;
    • During this rotational movement, the blades grab the grass and, as it were, send it to the lower knife;
    • When the lower horizontal knife comes in contact with the blade on the spindle drum, the grass is cut like a scissor.

    The cutting height of the grass in this device can be adjusted at your discretion.

    Hand lawn mowers have several advantages:

    • When using them, you can mow the grass immediately into a wide strip (35-40 cm).
    • It does not make noise, so even if you want to mow the grass early in the morning, and there is a densely populated suburban area around, then you do not risk waking someone up.
    • With the help of such devices, an even cut of the grass cover is achieved.
    • These attachments can be used in all weather conditions.
    • They are environmentally friendly, no harmful gasoline fumes will be released into the atmosphere.
    • They are not that expensive, you do not need to buy gasoline, electricity is not consumed, as a result of which they are quite economical. If you need to repair such a lawn mower, then the spare parts are also not too expensive in material terms.
    • They are very practical in application.
    • No risk of accidental electrical shock.
    • It is very easy to use and repair it, if necessary, you do not need to call specialists.

    With so many advantages, hand lawn mowers also have disadvantages:

    • When using them, you will need to exert considerable physical effort;
    • These lawn mowers can be used in small areas with a perfectly flat grass surface;
    • Difficulties may arise when dealing with weeds.

    If you nevertheless decide to stop at manual lawn mowers, it will not be superfluous to find out a few rules for choosing this device.

    Pay attention first of all to the width of the mechanism. The wider the fixed knife is, the greater your productivity will be, that is, you will be able to cut large strips. It is also very important to be able to adjust the cutting height from 1 to 5 cm.

    Of course, you should also pay attention to the manufacturer. The hand lawn mowers of the following firms are considered the best: "Husqvarna", "Gardena", "Stihl".

    When buying, carefully study what the lawn mower is made of. Light plastic should alert you, as the mechanism will break faster. The metal will be more durable, but it has the ability to rust. Here it is up to you to decide, the main thing is to remember, with careful attitude, any device will serve much longer.

    Try to choose lawn mowers with large and wide wheels.

    Mechanism details are very important, choose a model with strong and sharp knives.

    There are now various additions to power lawn mowers. For example, a bag for collecting cut grass, it can even be crushed in it.

    Mowing your lawn is ideal if you use a trimmer for mowing. These garden devices are considered the most convenient to use, with their help you can mow the grass not only on perfectly flat surfaces, but also in hard-to-reach places: around trees, bushes, flower beds. They are gasoline, battery and electric. They act on the principle of an ordinary scythe, trimmers are even sometimes called a lawn mower or an electric trimmer. Let’s dwell on each option in a little more detail.

    The petrol trimmer can handle large lawn areas, regardless of their relief features. The most productive and powerful lawn mowers.

    Their biggest plus is that there is no binding to electrical wires, this provides complete freedom of action and movement. After all, it so happens that the lawn area is located far from housing construction. In order not to unwind whole bobbins with an electric wire to connect the trimmer to a power source, the best solution is a gasoline device.

    There are drawbacks to these trimmers:

    • During operation, they vibrate and make noise;
    • They weigh quite a lot;
    • It is necessary to stop work periodically for refueling.

    They differ in the volume of the fuel tank; from 0.5 to 1.5 liters of gasoline are poured into different models. But, it should be borne in mind that the more gasoline can be poured into the tank, the harder such a trimmer is to work.

    It is possible to use this type of trimmers only when housing buildings with a constant power supply are located nearby. However, they have several advantages:

    • When working with an electric trimmer, noise is not created (it works almost silently), the atmosphere is not polluted;
    • Such a garden tool is lightweight;
    • It starts working only by pressing a button;
    • No need to constantly stop to refuel.

    What are the disadvantages of such devices? They are less powerful than gasoline ones and during operation there is a certain restriction in movement due to an electric cable.

    Electric trimmers are classified into two types based on engine location. There are devices that have the engine on top and have heavy duty line that can handle tall and thick grass. They are more expensive, but more productive and more powerful than low engine trimmers, which are more suitable for cutting soft grass.

    Battery-powered trimmers are much lighter than petrol and electric trimmers due to the lack of an engine. Other benefits include:

    • Simple construction;
    • Lack of an electric cable;
    • No need to buy expensive gasoline;
    • Low cost.

    But the performance and power indicators of battery trimmers are not very high, the charge lasts a maximum of 40 minutes of operation, and it takes a long time to charge.

    Ideally, it would be nice to have a hand lawn mower for mowing grass on a level lawn and a battery trimmer for working in hard-to-reach places at their summer cottage.

    Lawn mowers are good for cutting grass on large, level surfaces. But very often you have to work the lawn near fences, fountains, flower beds, garden paths, under benches, around bushes, trees and flower beds. Lawn scissors can do this quickly and neatly.

    Garden tool manufacturers offer two options for such a device. It is very convenient that they can be cut by placing the scissors both straight and at an angle.

    Hand clippers have a special mechanism that adjusts the position of the blades. Due to this mechanism, the blades rotate at an angle from 0 to 180, and sometimes up to 360 degrees. These scissors can be used equally with the right and left hand.

    The second option is battery scissors. In appearance, they resemble hair clippers. They also have metal blades, only larger ones. The scissors are recharged from the battery and then you can work with them continuously for 1-1.5 hours.

    The principle of operation is similar to lawn mowers. The lower knives remain stationary during operation, while the upper knives are driven and displaced from one side to the other. The working parts of the tool are located horizontally, therefore, they must be periodically cleaned during cutting. The knives in such devices are diamond sharpened and can withstand considerable loads.

    The advantage of cordless shears over mechanical shears is in higher power and cross-country ability. The only drawback is that they are heavy in weight. After a few minutes of work, the hand will noticeably feel tired.

    Electric scissors work and look almost the same, only a long wire is especially inconvenient in work, you will have to constantly stretch it along.

    Before going to work, check how firmly and reliably all the elements of the mower are fixed. Remove all foreign objects on the lawn surface: children’s toys or debris. Wear appropriate clothing that, in case of carelessness, can protect you: closed high shoes, solid tight pants, glasses and gloves.

    When working, you should only move forward and not too fast. At regular intervals, work must be stopped and the collection box with cut grass must be cleaned.

    After working, thoroughly clean the deck and knives from grass residues using a regular brush, wipe the body and handle with a dry cloth.

    When you have finished all work on the lawnmower, store it in a place out of the reach of children. Make sure that no moisture gets into the garage or shed where it is stored.

    Check the knives periodically, if they are dull, contact a special service center for sharpening or sharpen them yourself with an angle grinder with an abrasive wheel.

    The first mowing of the lawn is carried out when the grass reaches a height of 10 cm. As a rule, the optimal height of the lawn grass is considered to be 4-6 cm, but during the first mowing it is allowed to cut only 2-3 cm. It is recommended to mow the grass for the first time no earlier than 20-30 days after planting. It is also impossible to delay too much with the first mowing, otherwise the grass will grow, and after a good rain it may lie down, then it will not rise and it will be problematic to mow it.

    The big mistake of many summer residents is that they postpone the first haircut for a long time due to the weak type of grass cover and fear of trampling it. In fact, after trampling, the grass, on the contrary, begins to bush even more and create a dense turf. And then, after all, you will not move along the grass itself, but already along the mowed, letting the lawn mower forward. Therefore, as recommended, do so, do not postpone the mowing for any of your personal reasons.

    As a rule, the first lawn mowing is done in mid-May. This should not be done on a rainy day to keep the plants dry, otherwise the lawnmower may clog up. But at the same time, the soil should be slightly damp, because the blades of grass will tear out from the dry ground with roots. The same will happen if the knives of the mechanism are poorly sharpened.

    The ideal time to mow your lawn is in the early morning or evening. This should not be done in the midst of a hot summer day, because the cut of grass will immediately begin to dry out and turn yellow in the sun, and this, in turn, impairs the appearance of the lawn coverage.

    Subsequent haircuts are done once every 1-2 weeks, depending on weather conditions.

    The last mowing is done in September-October.

    Having studied in detail all the information about what devices and devices are needed for mowing the grass, how regularly and accurately it needs to be done, perhaps someone will want to start a lawn due to lack of time and effort. But do not rush to give up the idea of ​​a beautiful grass cover in your summer cottage. Set up a lawn for the lazy. this is the name of the area planted with white, pink or red clover. Or set up a wild natural lawn in a sunny place, the so-called. These types of lawn coverings do not need regular haircuts, and they will create no less beauty and comfort.

    Increasingly, summer cottages are becoming not only a territory where you can grow fruits and vegetables, but also a place for recreation. Allocate zones where gazebos with barbecue facilities are placed and flower beds and lawns are laid out. To have such a lawn, not so much effort is needed: water it and cut it in time.

    Once the lawn grass seeds have been sown, the immediate question is what tools are needed to mow the lawn. A simple oblique to make an even haircut will not work. For this, a large number of different tools have been released:

    • Lawn scissors;
    • Trimmer;
    • Lawn mowers.

    It is a bar with handles, a special coil and a motor, which can be electric or gasoline. The reel has a spool on which a special line is wound or a knife is put on.

    Note! The electric trimmer simply plugs in and is ready to go. It is lightweight, handy, but its operation requires long wiring and a socket, which is not always convenient. It will be difficult to mow a large area.

    • Low-power. Comfortable, lightweight, but can’t handle tough, wet grass and weeds.
    • Powerful. They come with a lower motor and an upper one. A special blade can be fitted to cut coarser grass. Models with a lower motor do not cut wet grass.
    • Rechargeable. lightweight, mobile. The disadvantages include the fact that the battery lasts for an hour.

    A trimmer with a gasoline engine is heavier than an electric mower, but it differs from it in mobility. It has a forged shaft, shoulder straps and a powerful drive train. The device of the gearbox allows you to use in work not only fishing line, but also a knife and a toothed disc, which greatly improves the quality of processing the site. The lawn mower can mow very impressive areas.

    With a trimmer, you can mow grass in hard-to-reach places (under benches, near posts), as well as mow paths, regardless of their location.

    But there are still a few disadvantages:

    • Don’t get a flat surface;
    • Longer mowing causes the operator to get tired.

    It is clear why this unit is so named. it is a technique for mowing grass on the lawn. Looks like a cart on wheels with special knives and a device for collecting cut grass. Lawn mowers come in different models:

    • With a gasoline engine;
    • Mains powered;
    • Rechargeable;
    • Spindle.

    As with trimmers, gasoline lawn mowers are mobile and can work far from home. But they are heavier, more difficult to use and also make a lot of noise.

    Lawn mowers with an electric motor are lightweight, do not make a lot of noise, are easy to clean, and absolutely harmless to the environment. The disadvantages include the need for a nearby electrical network.

    Rechargeable batteries are good for everyone: there is little noise, the lawn is even, it is easy to work, only the battery lasts for a certain time.

    Spindle mowers are those where there is no engine. The device is designed as if the lawn is being cut with scissors. It turns out very nice and neat, but the process is very time consuming.

    This tool is used where it is impossible to work with neither a lawn mower nor a trimmer.

    Gardeners are often confused as to whether it is possible to mow wet grass with an electric lawn mower. Unlike a manual scythe, mowing damp grass with a gasoline lawn mower is not worth it, and an electric one is not at all worth it. When working with a trimmer or a similar lawn mower, moisture can get into the electric drive or wires, a short circuit will result, and at best the tool will burn out, and at worst, the operator will suffer.

    Do not work after a rainstorm and gasoline-powered equipment. The grass becomes heavier, leading to premature tool failure. First of all, due to overheating, the piston pair and other moving parts will break.

    Important! If it is impossible to postpone work, then it is necessary to take breaks in work every 10-15 minutes and let the tool run at idle speed.

    The lawn itself may also be affected. The soil will be wet, furrows will be formed and the grass will be mowed in ugly stripes. Young plants can be pulled out along with the roots, and in older grass the cut will be uneven, torn, which can lead to various diseases. The scattering of grass after the trimmer will also be uneven, which can lead to bald patches on the flat surface of the lawn. It turns out that you can mow raw grass with a gasoline mower, but it is better to choose another time for mowing.

    Any equipment breaks down at the most inopportune time, and lawn care equipment is no exception. The most common breakdowns on lawn mowers include:

    • Defective engine. It is necessary to check the fuel in the tank, the performance of the spark plugs, the cleanliness of the filters.
    • Carburettor clogged. It is necessary to check the gasket between the carburetor and the engine, blow out the fuel hose.
    • Muffler defective. Clean anti-spark grid.
    • Damage to the gearbox. Check gears and bearings.
    • Failure of the starter. Check cord tension.
    • Air filter problems. If the braid starts without a filter, then you need to change it to a new one.

    Important! If you carefully monitor the mower, carry out preventive inspections and replace its components, then the tool will last a very long time without any repairs.

    The trimmer is simpler than its gasoline relative, therefore, it has fewer problems, but it still has:

    • Defective electrical cable;
    • Defective power outlet;
    • The plug has been damaged;
    • There is a problem with the control stick;
    • Burned out motor stator;
    • There was a break in the contact connection.

    To detect the above problems, you can use an indicator screwdriver and a multimeter, and in most cases, you need a soldering iron to fix a breakdown.

    If you follow the safety rules, including under no circumstances mowing damp grass with appliances powered by electricity, and refrain from mowing wet lawn with a gasoline mower, so as not to harm the plants, then the tools will last long enough.