Lubrication for the electitress gearbox Makita. Not the most successful lubrication option…

Lubricant for a trimmer gearbox for grass. Than and how to lubricate?

Echo SRM-22GES SB. Universal lawn mower for unprofessional use, which is easy to handle, reliability and safety. This model will cope with the haircut of the lawn in small and medium sections. Due to its ergonomics and versatility, such an instrument. This is a good choice for owners of small country houses and summer residents.

A trimmer for Echo SRM-22GES SB grass is equipped with a two-stroke engine with a capacity of 0.9 l.With. and ES-START light launching system. Thanks to the function of lightweight launch, you do not need to make much effort in order to start work. The built.in primer (manual fuel pumping pump) also facilitates the launch of the motor. An increased translucent fuel tank is convenient to see the remainder of fuel and allows you to increase the interval between refueling.

Lubrication of shaft and gearbox on a benzokos.

On the Echo SRM 22ges SB there is the possibility of choosing a cutting tool: a trimmer cord or a cutting disk for grass. A three.blade knife is made of special steel, so the cutting edges remain sharp for a long time. Trimmer for grass is equipped with a semi.automatic mowing head. Safety provides a shock.resistant casing and protective glasses. A detachable shaft is installed on this model that makes the technique convenient for storage and transportation. For good controllability, the lawn mower is equipped with an ergonomic “bicycle” handle and a comfortable shoulder belt.

• A guarantee of the quality and originality of the technique, the company “Direct Hands”. The official dealer of the Echo brand in St. Petersburg and the Leningrad Region;
• Favorable price for benzenery and maintenance;
• pre.sale preparation of technology and briefing on safe handling it;
• “Straight arms”. Authorized service, we will carry out for you the warranty and post.warranty repair of the trimmer for Echo grass high.quality and on time.

Operating instructions for a trimmer for Echo SRM-22GES SB grass

800 for other areas of St. Petersburg within the Kad.

How to lubricate the gearbox of a trimmer for grass?

In the upper part of the case where the gearbox is installed, there is a technological hole, which when the trimmer for the grass is twisted by a screw. This screw is unscrewed, and 1.5. 2 ml of fat is injected into the hole with a nozzle on the tube. If the lubricant was purchased in another package, a regular disposable medical syringe is also suitable for this operation.

Read how to change oil in a motoring gearbox

After that, the screw is installed in its former place. This procedure, regardless of the user recommendations, must be carried out every 10. 15 hours of work of a trimmer for grass in working mode. Other reasons for the renewal or replacement of transmission oil are independent minor repair work (for example, cleaning and washing of the gearbox before the summer season), repair of the unit, storage of a trimmer for grass for winter, etc. D.

If the gearbox is disassembled, it is recommended to completely remove the remains of the previous oil from the surface of the parts, even if there are no traces of oxidation and pollution on it. How to lubricate a trimmer for grass or how to lubricate a gearbox with a gasoline trimmer. And only after that apply new oil. After applying the oil, it is recommended to turn the shaft several times manually and make sure that the oil is evenly distributed over all parts of the gearbox.

When lubricating, special attention is paid to the following elements:

• Flywheel: on its surface, as a rule, the remnants of the grass are intensively stick, and the condensing juice of grass creates additional resistance.
• The starting coil of the dog, which is in constant contact with the grooves on the flywheel when the drive is turned on. In this case, not only mechanical depreciation occurs, but also mechanical and chemical corrosion of the compound of the flywheel, since the materials for this pair are different (flywheel. Aluminum, dog-old).
• Bearings, if their seals are worn out and lubricated through them. How to lubricate a trimmer for grass-expert? 8 How to lubricate a gearbox of a trimmer for grass grease the gearbox. In this case, the device begins to vibrate greatly under load. This happens with trimmers of Chinese.made, so in the future you should think about replacing a bearing unit with a better, for example, from the Swedish company SKF.

Lubrication of the electrimmer as part of the service

During the mowing of grass, the speed of rotation of the shaft is 7-10 thousand revolutions per minute, therefore, even in the absence of a load, that is, to work in idle, the surfaces of the parts that are in contact, they rub very much about each other.

This leads to their heating and abrasion, which ends with the destruction of the gears of the gearbox and sliding bearings, which form the shaft and the bushings holding it.

The only way to avoid their destruction is to lubricate, the formation on their surfaces of the slippery protective layer reduces the harmful effects thousands of times and extends the service life of parts.

What to lubricate?

If you have an electric cross with the lower location of the engine, then it does not need to lubricate anything in it, because the engine is equipped with underlying (closed) bearings, in which the lubricant is laid for the entire service life.

In electrimmers with the upper location of the motor, fill the bar with grease, because inside it are bushings, which, together with the tissue shaft, form sliding bearings.

If you have a tool with an upper motor and a straight bar, then fill the bar and gearbox with grease.

Removing and lubrication of the upper shaft of a trimmer for grass

First of all, we remove the lower part of the rod from the connecting coupling, and then disconnect the coupling from the upper part of the bar (here we are talking about a coupling connecting two halves of the bar).

Trimmer for PRorab-8406 grass with a detachable coupling and the lower part of the bar

Now the most interesting thing: on some videos, as on this, holding the ticks of the shaft with ticks, sticking out of the upper part of the bar from below, knock out it with blows on the rods from the rod along with the rolling bearing (here we are talking about the coupling connecting the upper and lower shafts). Some have a gas station with a collapsible bar, as in the video, a coupling connecting the upper and lower shafts, it is put into the rolling bearing.

With our trimmer Prorab-8406 and such a number will not pass like him. They do not have a rolling bearing, and the connecting coupling (sleeve) is a continuation of the shaft of the upper rod. A locking ring is installed in the upper part of this shaft, which must first be removed.

The place of fastening of the upper part of the bar to the clutch clutch body

• We turn off the central screw completely. It fixes the upper part of the bar, partially entering the hole drilled in it. We loosen the side clamping screws and remove the bar from the clutch clutch body.
• We put out the shaft from the upper part of the bar on ourselves how much the backlash allows to get to the stop ring and remove it. A special puller may be needed. We extract a locking ring.

Stop ring on the upper shaft Motokos

• Without a locking ring, the upper shaft is easily extracted from the bar from the opposite side. Lubricate it, not forgetting about the slots in the bushings (couplings) on the shaft of the bar and on the clutch shaft.
• The greased shaft is installed in place in the upper part of the rod and fixed with the locking ring. We insert the bar into the hole of the clutch clutch cover and combine the hole on the bar with the threaded opening of the fixing screw.
• We screw the fixing screw and fix the upper part of the trimmer rod for the grass with side screws in the clutch lid.
• Clean the connecting coupling of the bar from the garbage and install from below on the upper part of the bar.

I don’t have a puller, and I use two large stationery paper clips to extract a locking ring. Previously, they need to be straightened, on one side make a half.ring for the fingers, and on the other. bend small hooks.

In many videos, masters recommend using Shrus-4 grease, this is the best option. In its absence, to lubricate the shaft of the gas mowing rod, you can use Litol-24, which is focused on temperatures up to 130 ° C. But solidol, with the worst lubricants and working at temperatures up to 70 ° C, is not recommended to use.

However, if you urgently need to lubricate the shaft of the rod motorcosa, but there are no suitable materials, then solidol or even ordinary motor oil will be better than nothing at all.

Types of gearboxes for motorcycle

The design of the gearbox for a business trimmer for grass consists of a certain number of built.in gears, which, during the operation of the mechanism, rotate on a set speed device. Tough gears are designed to lower or increase the initial speed of the working entrance shaft. Thus, when the operator presses on the accelerator, mowing coils or cutting knife rotate faster, and when the lever is released, more slowly.

The gearboxes used by manufacturers of garden equipment are divided into such types:

• cylindrical;
• wave;
• worm;
• planetary type;
• conical;
• spiroid;
• Combined type mechanisms.

The cylindrical motorcosa gearbox consists of several gear cylinders. They are quite rarely installed on trimmers for grass, since most gasosos are equipped with worm gearboxes.

Planetary type gearboxes deserve separate attention. Their built.in shafts are located in the device of the mechanism of the rose. At the same time, the shafts of conical gearboxes are in the cross position.

Another type of gearbox is lowering. The mechanisms of this type are not included in the standard equipment of the motorcycle, however, they are almost always used to manufacture homemade homemers based on garden trimmers.

Straight Blog Read a trimmer Eletric for grass Al-ko BC 1200 E

In the parental dacha grass to the waist In the garage, a trimmer was discovered an ethletric for the grass Al-ko BC 1200 E in a deplorable state. During the initial examination, it turned out that it can be returned to life if you carefully clean, finalize and restore some lost details.

T.to. Previously, I have never had a case with trimmers, I decided to get acquainted with the instructions that is written already in 22 languages. The instruction surprised! Fuflo, not instructions! It is very strange for a German company when the manual does not contain any information about service, there is not even a section! Only assembly from the box and that’s it! Recommendations on periodic cleaning, the need to disconnect from electricity and protect from children not count. Suddenly! Could indicate the frequency of reducer service, recommended duration of work, fishing line diameter and type of lubricant nothing! I had to figure it out on my own.

NB: The bobbin has a left thread everywhere

Prevention of breakdowns

To avoid breakdowns and subsequent expensive repairs, it is recommended to comply with a number of simple rules for the operation of a trimmer for grass and servicing the gearbox.

• Lubricate this garden tool immediately after purchasing. before starting operation. Usually or huter) applies only a small amount of lubricant, which is enough only for running.
• At the end of the season or before a long.term storage of a trimmer for the grass, you should disassemble the gearbox, check the condition of the bearings and gears, grease the knot.
• It is required to add grease after the tool works from twenty to forty hours. With intensive loads, this time is reduced to twenty hours.
• Change grease to a new one is necessary when repairing a structure or before the start of the season.
• Когда редуктор перегревается или издает сильный шум, нужно проверить наличие смазки. If it is present in sufficient quantities, it is recommended to replace it completely with another.

So, you can carry out repair and lubrication of the gearbox Motokosa yourself at home. The addition of lubricants will not be difficult, a detailed description of this process and recommendations for the choice of a suitable substance can be found in the instrument operation instructions or on the video, which many are presented on the Internet. Most of the breakdowns of gearboxes are typical for trimmers of different brands, it is quite easy to eliminate them if you know the correct procedure for actions. And in order to avoid their appearance, it is enough to observe simple operating rules and conduct timely maintenance of a trimmer gearbox for grass.

Reducer device

In order to better understand what lubricant is needed for your trimmer for grass, you need to figure out how the gearbox works, what components it consists of and analyze the working conditions of these nodes.

The trimmer gearbox for grass is usually located at the lower end of the drive shaft and serves for two main tasks:

• Transmission of the rotational movement of this shaft Bobin with a fishing line or a mill
• Increasing the torque of motorcycles by reducing the number of revolutions

Typically, the gearbox consists of the body itself, shafts, several bearings, one or more cylindrical and conical gears, seals (see. a photo).

When the trimmer for the grass for the gearbox, vibrations and shocks associated with a change in resistance to rotation from the interaction of the cutting node with grass, and shrubs are transmitted. Grass or dirt sticking to knives also with a high constantly changing speed of rotation contribute to the occurrence of dynamic vibrations and vibrations.

In general, we can say that the reducer nodes operate at a high speed of rotation and dynamic loads. At the same time, high contact voltages occur on the teeth of the gears, bearings experience transverse vibrations.

Temperature regimes are medium, since the tool is designed to mow grass, and this work is usually performed in the summer, at positive temperatures. As a result of friction, the nodes of the gearbox are heated, but excessive heat is removed by the lubrication and cooling of the gearbox body with atmospheric air.

Strong heating is a phenomenon uncharacteristic for the gearbox and indicates the need to repair the node or its lubrication.

How to lubricate the gearbox of a trimmer for grass?

All these nuances and features of the service and lubrication of the device have already been taken into account by the manufacturer. in the operating instructions, recommendations are given which material can be used for service. Most often, there is not a specific brand brand, but those generally accepted standards to which it should comply with.

If there is no way to purchase the material recommended by the manufacturer, or it is not indicated in the instructions, then the choice of lubricants is made independently.

Lubrication must take into account all the factors listed above. temperature regime, high rotation speeds, dynamic loads and vibrations.

An important requirement for lubricant is also its ability to remain in the friction zone, not to be dumped under the influence of centrifugal forces during rotation and not squeezed out under load.

Lubrication for the gearbox should have good anti.corrosion properties and reliably protect the nodes from the formation of rust as a result of the effects of atmospheric moisture.

You can maintain the reducer service with lubricants of general.industrial purpose. The main thing is that they correspond to the operating conditions as much as possible and contain anti.sympathetic additives and filler in the form of solid lubricants (preferably molybdenum disulfide).

Lubrication has moisture resistance, excellent antioxidant and anti.corrosion properties.

Champion EP-0

Lubrication provides long.term lubrication, prevents corrosion, protects from wear of the formation of bully and effectively reduces friction losses.

Lubrication is available in tubes with a volume of 50, 120 and 250 ml.

The lubricant penetrates the friction zone well and has excellent lubricant and heat.heating properties, preventing overheating.

Many users for lubricating a trimmer for grass successfully use even ordinary cheap lubricants, such as Shrus-4 or Litol-24.

Shrus 4

Shrus 4 also has excellent anti.zadyr characteristics, good anti.corrosion properties. It maximally reduces friction and minimizes the wear of friction surfaces.

A significant advantage of this material is its low cost.

Lubrication is made by many manufacturers and is available in a wide variety of packages.

This is a purely lithium mineral lubricant without adding any fillers and additives.

There are currently a large number of more advanced lubricants.

It has a low level of operational characteristics, but for a short time it is still capable of performing protective and anti.intelligence functions.

Incredibly low cost makes it still attractive for many owners of garden tools.

Lubricants for Makita gearboxes.402 goods

from 450 ₽ Lubrication for drill 95 ml Makita 196804-7 buy

The grease for the drills of Makita 196804-7 is used to lubricate the shank of the drill. The lubricant protects the nozzle from premature wear, and also increases the operational period of the peorator

from 509 ₽ Lubrication for the power tool “Ultra-0” buy

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

from 570 ₽ Makita oil 988402656 for a chain (1l) buy

The oil is designed specifically to lubricate the cutting parts of chain saws to prevent their gap or jamming. The oil has good lubricants even when working at high speeds

from 252 ₽ Lubrication for Ultra power tools System package 50. Buy

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

from 97 ₽ Lubrication for reducers of the power tool “Ultra-0”. Buy

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.

from 188 ₽ Lubrication for reducers of the power tool “Ultra-0”. Buy

Lane lubricant 50g. MS 4115-0 for power tools, prevents the jamming and rusting of toothed gearboxes in corner grinders, peorators, rupture of part 1002 manufacturer VMPUUTO

from 465 ₽ Lubrication for gearboxes multi-purpose ECO 100 g (OG-1. Buy

from 546 ₽ Car lubricant TRW PFG110 0.025 kg buy

Lubrication for the brake system PFG-110. This is a targeted PIN-luggage that does not damage the material of anthers, a caliper cuff, not soluble in ethylene glycol of brake fluids. The lubricant includes a pag-butter and thickening. Li-Complex

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.

from 394 ₽ Hubble Mannol EP-2 Multi-Mos2 Grease 0.23 kg buy

Universal multi-purpose outdadical plastic lubric lubricant based on highly purified mineral basic oil with the addition of anti-sympathetic and outfit (Ep.Extreme Pressure) molybdenum and lubricant disulfide, which has a high t.

-457 Multifunctional DDE Multifunctional oil session for 0.1l gearboxes (NLGI 2. Graphite and Molybdenum di-Sulph multi-purpose, antifriction, waterproof lubrication with EP additives. Application: gearboxes and flexible shafts of motorcycles, trimmers and black cutters; Roller and needle bearing.

from 410 ₽ Lubrication for drilling union Special Drill Grease, 100g Buy

Boers lubricant are used in peorators to reduce friction and vibration of rotating elements of the shock mechanism and drill. It is used to lubricate the shanks of the drills, chisel, shoulder blades, trunks of peorators and jack hammers. Lubrication has high water resistance, antico.

from 450 ₽ Lubrication Makita P-08361 30 g buy

The lubricant for the Makita R-08361 gearbox is designed to reduce friction and to ensure highly constant operation of the gearboxes, reliably protects against corrosion, with a wide temperature range from.40 to 400 degrees, prevents from a nap, perfectly approach.

from 354 ₽ Lubrication Makita 196804-7 buy

Used for lubrication of both the drill itself and its shank. Applied to the product before installation in a peorator or jack of a hammer. Designed to protect the nozzle from wear, reduces the temperature of the parts, reduces the entry of dust inward and increases life.

from 260 ₽ Gear lubricant to buy

Type of lubricant: lithium, scope: bearings, cardan shaft, specialization: specialized, universal, type of thickening: lithium-calcium, consistency: liquid, temperature regime: high-temperature, color: blue

Lubricants for Makita gearboxes

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Lubricant for the Makita gearbox. 30g, for peorators

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Lubrication for Ultra power tools System package 50 g

The oil is designed specifically to lubricate the cutting parts of chain saws to prevent their gap or jamming. The oil has good lubricants even when working at high speeds

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.

Lubrication for gearboxes of the Ultra-0 power tool, Vfavto, 50 g

Universal multi-purpose outdadical plastic lubric lubricant based on highly purified mineral basic oil with the addition of anti-sympathetic and outfit (Ep.Extreme Pressure) molybdenum and lubricant disulfide, which has a high t.

Lubrication Mannol EP-2 Multi-Mos2 Grease 0.23 kg

Boers lubricant are used in peorators to reduce friction and vibration of rotating elements of the shock mechanism and drill. It is used to lubricate the shanks of the drills, chisel, shoulder blades, trunks of peorators and jack hammers. Lubrication has high water resistance, antico.

Subure lubricant SPECIAL DRILL GREASE, 100G

Scope: brake system, calipers, guides, specialization: anticorrosion, anti.script, consistency: plastic

Type of lubricant: lithium, scope: bearings, cardan shaft, specialization: specialized, universal, type of thickening: lithium-calcium, consistency: liquid, temperature regime: high-temperature, color: blue

Lubricants for Makita gearboxes

Universal grease Champion EP-0 225 g. Suitable for gearboxes, stars of tires, shafts and various similar tools that operate at high temperatures and strong loads. Effectively prevents corrosion and premature wear of parts due to ponies.

Champion lubricant universal 225 gr. EP-0

Lubrication for gearbox zip 100 gr.

Type of lubricant: molybdenum, scope: bearings, ball supports, shrap, sloping joints, dentate gears, slotted, specialization: repair, universal, consistency: plastic

Lubrication for gearboxes Brait Premium 100g

The sole of Makita 743081-8 is used in the following eccentric grinding machines: BO5010, BO5020, BO5021, BO5030, BO5031, BO5040, BO5041

Sole for Makita Makita 125 circle BO5010.5021.5030.5031, 5041

Ultra-1. Lubrication for servicing bearings, gearboxes, stars, slotted joints in peorators, jackpot hammers, trimmers, chainsaws and other construction, garden and household tools. Thanks to a soft consistency, it is evenly distributed throughout the mechan.

Universal mineral lubricant EP-0 50G.

Lubrication for gearboxes 3TON, 100 g 2703955

Field of application: battery terminals, specialization: moisture.spying, anti.corrosion, conductive, consistency: liquid, temperature mode: high.temperature, color: red

Liqui Moly Batterie-Pol-Fett Automobile

The lubricant is designed to serve gear gearboxes, and so on the mechanisms of operating at medium and high loads in the temperature range from. 40 ° C to 120 ° C. Special lubricant for gearboxes and surfaces of high friction, in t. h. For gearboxes.

The universal lubrication of Husqvarna is suitable not only for gearboxes of garden equipment, but also for bearings, gears, working nodes and details of various tools. Article: 5025127-01. Reduces the wear of the surfaces in the friction sites, prevents jamming, the appearance of TR.

Lubrication for garden technology Husqvarna Grease Multi-Purpose, 225 g

Oil. Multifunctional lubricant DDE Multipurpose ER-0 GREASE 0.1L (NLGI 0) 241-543 is characterized by high quality of raw materials and production. In the manufacture, the manufacturer complies with all the necessary requirements, and also lays the margin of strength/ lubricant from the manufacturer.

Lubrication DDE Multipurpose ER-0 GREASE 100ML NLGI 0 241-543

Solid lubricant of the VMPAVTO “MS 2000” is designed to protect and repair the pistons. Prevents the gravity of the parts, helps to increase the smoothness of the operation of friction units and facilitate the work, has a high bearing capacity, an increased resource.

High.quality lubricant for caring for a car, a variety of household and industrial use. Designed to lubricate threaded joints, rolling and sliding bearings, hinges, gear, worm and other transmissions, industrial mechanisms and friend.

Universal lubricant Husqvarna 5025127-01 helps to reduce friction and wear of contacting surfaces, thereby much increasing the life of the products. Has good lubricants and prevents corrosion. Environmentally friendly and biologically decompose.

Gear lubrication Universal Husqvarna 5025127-01

High.quality science lubricant for gearboxes, hoses, transmission of coils and motorcade gearboxes. Recommended for lubrication of any mechanical devices subject to high loads. Dropproof temperature: not lower than 191 CO penetration at 25 ° C with mixing.

Gear lubricant Arsenal AR-417 100g

For corner grinding, peorators, and others. power tool. With aluminum shock absorber. It is a unique development for lubricating open gearboxes in the power tool, has a deep penetrating effect, thermal stabilized. At a temperature of 60 0 ° C, dilution occurs.

It’s no secret that the car has long ceased to be perceived as just a means of transportation, and drivers buy all the best for their iron horses. The perfect choice if you set the goal of improving technical characteristics and maintaining the appearance of the car

Frecking of gearboxes for the power tool of the ULTRA-0 Navy MS4115, 200 g, tube 1003

Universal lubrication WD-40 with unique penetrating ability. Serves for: moisture displacement, forming a protective barrier against dampness; drying and protecting electrical contacts; locking and preventing their freezing; Protection of metal surfaces.

Means for thousands of applications WD-40 400 ml

Lubrication Union Special Gear Grease SBS-0201A

Lubrication DDE Multipurpose EP Grease 100ML NLGI 2 241-529

Scope: CHRUS, Specialization: ACCOUNT, TOPISE TYPE: lithium, consistency: Plastic

It is used to lubricate the tool gearboxes. Designed for servicing gear gearboxes (in t. h. planetary and hypoid programs)

Lubrication for reducers of trimmers

Lubrication for gearboxes 250005 is a universal tool that is used in the maintenance of equipment with a gear gear (planetary, hypoid gears), as well as mechanisms operating at temperatures from.40 to 120 degrees for medium or high.

AL-KO garden lubricant for gearboxes, 100 g

Lane lubricant 50g. MS 4115-0 for power tools, prevents the jamming and rusting of toothed gearboxes in corner grinders, peorators, rupture of part 1002 manufacturer VMPUUTO

Lubrication for gearboxes of the Ultra-0 power tool, Vfavto, 50 g

Mineral.based universal oil for lubrication of saw chains, guides, sliding bearings and stars of modern high.speed chain saws. Protects against corrosion and wear, extends the service life of equipment. Recommended for chain saws Huter

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T. h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for debt.

Vfavto. Lubrication MS Ultra, 200g tube. 1003

Drill multi-slylic lubricant for coffee machines and meat grinder Original Bosch 10g.40/200 is used in models: Bosch TE603201RW/01, Bosch TE603201RW/02, Bosch TE603201RW/03, Bosch TE603201RW/04, Bosch Te603201RW/05, Bosch Te603201RW/07, BOSCH TE603201RW, BOSCH TE603201RW, BOSCH TE60320.

Lubricant for the Makita gearbox. 30g, for peorators

Machine oil (domestic lubricant) in an oil 50 ml, suitable for use at home, for lubricating locks, door loops, various mechanisms. Protects parts from corrosion

Universal multi-purpose outdadical plastic lubric lubricant based on highly purified mineral basic oil with the addition of anti-sympathetic and outfit (Ep.Extreme Pressure) molybdenum and lubricant disulfide, which has a high t.

Lubrication Mannol EP-2 Multi-Mos2 Grease 0.23 kg

Product: grease for gearboxes; Dimensions, mm: 170x80x50; Weight, kg: 0.12; Product volume, m3: 0.00068; Appointment: for gearboxes; Volume, ml: 100

Lubrication for gearboxes of grass-shirt/bush cutter 100 grams, Husqvarna 5039764-01

Lubrication for reducers of the ULTRA-0 power tool is designed to serve gear gearboxes (in T.h. planetary and hypoid programs). The lubricant contains anti.sympathetic and anti.oxidative additives that ensure reliable operation of the mechanisms for a long time.