Miter Saw With Speed Control

Makita SP6000 Set Review

Miter Saw With Speed Control

The circular saw from the Japanese company Makita belongs to the category of professional power tools. Model SP6000 Set can be used in industrial enterprises (woodworking, furniture manufacturing, etc.), in construction and in everyday life. The hand circular saw is delivered to the consumer in a convenient plastic case, the case is convenient for storing and carrying the product. Included:

  • Disc (48 teeth) for woodworking;
  • Hex key for saw replacement;
  • Guide rail with non-slip lining.

The main advantages of the Makita SP6000 Set circular saw:

  • The model has a diving function and can be used to make cuts from any point.
  • The set includes a guide, which ensures a smooth cut of the material at all times.
  • High power and a smooth start allows you to make a quality spray.
  • Smooth adjustment of engine speed from 2000 to 5200 rpm provides the ability to select the operating mode for each material.
  • Wide range of settings for cutting depth with a maximum of 56 mm, with a tilt of 45 °. 40 mm.
  • There is a function of setting a fixed cutting depth of 2 mm, which is done on one side of the sheet, followed by flipping and cutting to the full thickness. This method provides the highest quality cut
  • Adjustment of the inclination of the cutting plane within the range from 1 to 45 °. Locks are located at the front and back of the tool, which eliminates disc vibration.
  • Ergonomic rubberized handles that minimize vibration and provide a secure grip when working. Front handle is perpendicular to the cut line for increased precision.
  • Sophisticated protection of the operator from accidental touching the working body during use.
  • Convenient way to change a circular saw with the introduction of an L-shaped hex key through the side window in the protective cover.
  • The tool is distinguished by high quality components and assembly. there are backlash in the joints, and the screw locks on the regulating sectors are extremely reliable.
  • The presence of electronic protection against motor overheating protects the drive from failure.
  • Dedicated module maintains a constant engine speed at any permissible load.
  • Low noise and vibration levels when operating the power tool.
  • High cutting speed of any material, including non-ferrous metal sheets.

The hand-held circular saw of this model also has some drawbacks, in particular, consumers note NOT a very convenient way to adjust the angle of inclination. When returning to a vertical position, the use of a corner is necessary to ensure proper accuracy. It is almost impossible to use a power tool without an original guide, accuracy is significantly impaired.

User reviews published on the Internet are generally favorable. The analysis shows that the Makita SP6000 Set hand-held circular saw has been successfully used in various industries. In construction, when laying parquet and laminate flooring, where high cut quality is required. In furniture manufacturing enterprises, this circular saw model is used to make templates. This process requires precision cutting of various materials.

Buyers point to the acceptable cost of the professional model of the Makita SP6000 Set circular saw, which is much cheaper than analogues. The owners of this tool note the rich complete set of the product, which provides ease of transportation and storage. The hand-held circular saw has everything you need for work in the kit and is completely ready for use as intended.

Model overview Bosch GKT 55 GCE

The hand-held circular saw of the German company Bosch of the professional model GKT 55 GCE has been produced since October 2011. The complete set of the product for sale through retail outlets includes:

  • Circular saw 165 × 20 mm for woodwork;
  • Hex key for changing the working tool;
  • Cardboard box;
  • User guide.

The list of advantages of the Bosch GKT 55 GCE plunge-cut circular saw includes:

  • Light weight and dimensions of the tool ensure ease of use.
  • The handles have an ergonomic shape and are located at the back. parallel to the cutting plane, the front. perpendicular. This ensures the stability of the tool on the cutting line.
  • Convenient, intuitive saw blade controls.
  • The high power of the electric motor allows you to cut any materials, including composite ones: laminated chipboard, fiberboard and MDF.
  • Electronic control of the engine speed is possible in the range from 3600 to 6250 rpm. It is not difficult for the user to select the optimal operating mode for each material with the maximum cutting speed without overheating the cutting site.
  • The excellent quality of the circular saw makes the cuts very clean, which significantly reduces material consumption and reduces finishing costs.
  • High precision of adjusting the cutting depth in the vertical position. up to 57 mm, at an angle of 45 °. 42 mm. Exceptionally convenient limiter mechanism.
  • Immersion disc mode is provided, which allows you to start spraying from any point of the letter.
  • Ease of replacing the working body. a circular saw. In this case, the spindle is fixed by pressing a button, and the fixing bolt is unscrewed with a key from the delivery set.
  • Circular saw handles compatible with the new Bosch FSN guide rail.
  • It is possible to connect a vacuum cleaner to remove sawdust generated during the operation of the tool.
  • The circular saw is equipped with an electronic system “Constant Electronic” to maintain the speed of the shaft set by the operator when working under load.
  • The working disc has teeth of a special shape with a special sharpening, which reduces the noise level when cutting material.

Among the disadvantages of the model, users consider a short warranty period of only one year, but there is the possibility of extending it after registering on the manufacturer’s official website. There have been cases of saw rebound during the plunge operation, with damage to the sheet surface and guide. The diameter of the vacuum cleaner connector is incorrect, which makes it difficult to put on the hose.

READ  Sharpening Saws At Home

Feedback from users is mostly positive, indicating the high build quality of the product and ease of use. The ratio of price and quality of the product according to the customer’s response is optimal. There is a need to purchase guides and clamps for maximum convenience when using a circular saw, these accessories are NOT supplied with the tool.

DeWALT DWS520K model overview

The circular saw of the DeWALT trademark of the DWS520K model is distinguished by excellent quality of components and assembly. In addition to the product mentioned, the delivery set includes:

  • Disc for sawing wood with carbide tipped teeth;
  • Plastic case for storage and transportation of the circular saw and components;
  • Hex key L-shaped for disc change.

The main advantages of the DeWALT DWS520K circular saw are as follows:

  • The kinetic scheme of the saw plunge provides parallelism of the direction of application of force to the cutting plane. This provides complete control over the tool during use.
  • The downward movement of the saw is possible only after the lock is released, which ensures high safety of use.
  • A wide range of adjustments to the speed of rotation of the working disk from 1750 to 4200 revolutions allows you to set the optimal mode of cutting material.
  • The vibration level during product operation does NOT exceed 2.5 m / s2 and is easily damped by rubber pads on the control handles.
  • The start button is large enough and with a long stroke to work with gloves.
  • Well thought-out cutting depth adjustment mechanism with secure screw fixation.
  • The depth of cut when working without a guide reaches 59 mm, the maximum for a tool of this class.
  • The included blade ensures high cleanliness of cutting of various types of wood.
  • Provides high accuracy when cutting sheet material when using a proprietary guide.
  • The design of the guide allows you to make cuts on vertical surfaces.
  • The device has a removable battery, which ensures its autonomy in hard-to-reach places.

The disadvantages of the DeWALT DWS520K model are associated with ill-conceived disk protection, which quickly curls with sawdust without connecting a vacuum cleaner. High for branded equipment, and use without a guide is almost impossible. Consumers point to a lack of power when working with hardwoods.

Circular saws with stepless speed control

Circular saws are designed for making straight cuts when cutting different types of materials. The tool can be used to cut boards in the transverse and longitudinal direction, as well as composite sheet materials:

  • Plain and Bakelite plywood;
  • Chipboards and fibreboards;
  • Plastic;
  • Non-ferrous metals.

Circular saws with continuously variable speed control are electrically driven, and a blade with cutting teeth is used as a working body. The tool is powered from a single-phase household network through a cord with a standard plug.

The article provides an overview of the three most popular circular saw models from different manufacturers: Makita SP6000 Set, Bosch GKT 55 GCE and DeWALT DWS520K

Description of characteristics Makita SP6000 Set Bosch GKT 55 GCE DeWALT DWS520K
Rated power, W 1300 1400 1300
Output power, W 690
Disk rotation frequency without load, rpm 5200 6250 4000
Width, mm 341 310 303
Height, mm 250 240 265
Weight, kg 4.1 4.7 5.1
processing rates
Disc diameter, mm 165 165 165
Disc bore diameter, mm 20 20 20
Maximum cutting depth, mm 56 57 55
Angle of inclination of the cutting plane, degrees. 48 47 47
Functionality
smooth start there is there is there is
Getting started from anywhere (dive) there is there is
Motor overload protection there is there is
braking wire there is
Infinitely variable speed control there is there is
Connecting a vacuum cleaner there is there is there is
delivery set
Saw blade there is there is there is
Saw wrench there is there is there is
Case (suitcase) there is there is

Recommendations for choosing a circular saw with smooth speed control

The models considered in the review are quite consistent with their purpose. Hand-held circular saws Makita SP6000 Set and Bosch GKT 55 GCE are professional tools and can be used both in production and construction, and for personal needs. The DeWALT DWS520K model is designed for a wide consumer and, due to its characteristics, cannot be used for working with some types of wood and other materials of increased hardness.

In view of the above, we can recommend the Bosch GKT 55 GCE and Makita SP6000 Set models to those who are professionally engaged in construction, furniture and doors, as well as other types of woodworking. Circular saw DeWALT DWS520K is suitable for use in households when carrying out work with light and medium load on the tool.

Model overview Bosch GKT 55 GCE

The hand-held circular saw of the German company Bosch of the professional model GKT 55 GCE has been produced since October 2011. The complete set of the product for sale through retail outlets includes:

  • Circular saw 165 × 20 mm for woodwork;
  • Hex key for changing the working tool;
  • Cardboard box;
  • User guide.

The list of advantages of the Bosch GKT 55 GCE plunge-cut circular saw includes:

  • Light weight and dimensions of the tool ensure ease of use.
  • The handles have an ergonomic shape and are located at the back. parallel to the cutting plane, the front. perpendicular. This ensures the stability of the tool on the cutting line.
  • Convenient, intuitive saw blade controls.
  • The high power of the electric motor allows you to cut any materials, including composite ones: laminated chipboard, fiberboard and MDF.
  • Electronic control of the engine speed is possible in the range from 3600 to 6250 rpm. It is not difficult for the user to select the optimal operating mode for each material with the maximum cutting speed without overheating the cutting site.
  • The excellent quality of the circular saw makes the cuts very clean, which significantly reduces material consumption and reduces finishing costs.
  • High precision of adjusting the cutting depth in the vertical position. up to 57 mm, at an angle of 45 °. 42 mm. Exceptionally convenient limiter mechanism.
  • Immersion disc mode is provided, which allows you to start spraying from any point of the letter.
  • Ease of replacing the working body. a circular saw. In this case, the spindle is fixed by pressing a button, and the fixing bolt is unscrewed with a key from the delivery set.
  • Circular saw handles compatible with the new Bosch FSN guide rail.
  • It is possible to connect a vacuum cleaner to remove sawdust generated during the operation of the tool.
  • The circular saw is equipped with an electronic system “Constant Electronic” to maintain the speed of the shaft set by the operator when working under load.
  • The working disc has teeth of a special shape with a special sharpening, which reduces the noise level when cutting material.
READ  Stihl saw attachment for cutting

Among the disadvantages of the model, users consider a short warranty period of only one year, but there is the possibility of extending it after registering on the manufacturer’s official website. There have been cases of saw rebound during the plunge operation, with damage to the sheet surface and guide. The diameter of the vacuum cleaner connector is incorrect, which makes it difficult to put on the hose.

Feedback from users is mostly positive, indicating the high build quality of the product and ease of use. The ratio of price and quality of the product according to the customer’s response is optimal. There is a need to purchase guides and clamps for maximum convenience when using a circular saw, these accessories are NOT supplied with the tool.

Makita SP6000 Set Review

The circular saw from the Japanese company Makita belongs to the category of professional power tools. Model SP6000 Set can be used in industrial enterprises (woodworking, furniture manufacturing, etc.), in construction and in everyday life. The hand circular saw is delivered to the consumer in a convenient plastic case, the case is convenient for storing and carrying the product. Included:

  • Disc (48 teeth) for woodworking;
  • Hex key for saw replacement;
  • Guide rail with non-slip lining.

The main advantages of the Makita SP6000 Set circular saw:

  • The model has a diving function and can be used to make cuts from any point.
  • The set includes a guide, which ensures a smooth cut of the material at all times.
  • High power and a smooth start allows you to make a quality spray.
  • Smooth adjustment of engine speed from 2000 to 5200 rpm provides the ability to select the operating mode for each material.
  • Wide range of settings for cutting depth with a maximum of 56 mm, with a tilt of 45 °. 40 mm.
  • There is a function of setting a fixed cutting depth of 2 mm, which is done on one side of the sheet, followed by flipping and cutting to the full thickness. This method provides the highest quality cut
  • Adjustment of the inclination of the cutting plane within the range from 1 to 45 °. Locks are located at the front and back of the tool, which eliminates disc vibration.
  • Ergonomic rubberized handles that minimize vibration and provide a secure grip when working. Front handle is perpendicular to the cut line for increased precision.
  • Sophisticated protection of the operator from accidental touching the working body during use.
  • Convenient way to change a circular saw with the introduction of an L-shaped hex key through the side window in the protective cover.
  • The tool is distinguished by high quality components and assembly. there are backlash in the joints, and the screw locks on the regulating sectors are extremely reliable.
  • The presence of electronic protection against motor overheating protects the drive from failure.
  • Dedicated module maintains a constant engine speed at any permissible load.
  • Low noise and vibration levels when operating the power tool.
  • High cutting speed of any material, including non-ferrous metal sheets.

The hand-held circular saw of this model also has some drawbacks, in particular, consumers note NOT a very convenient way to adjust the angle of inclination. When returning to a vertical position, the use of a corner is necessary to ensure proper accuracy. It is almost impossible to use a power tool without an original guide, accuracy is significantly impaired.

User reviews published on the Internet are generally favorable. The analysis shows that the Makita SP6000 Set hand-held circular saw has been successfully used in various industries. In construction, when laying parquet and laminate flooring, where high cut quality is required. In furniture manufacturing enterprises, this circular saw model is used to make templates. This process requires precision cutting of various materials.

Buyers point to the acceptable cost of the professional model of the Makita SP6000 Set circular saw, which is much cheaper than analogues. The owners of this tool note the rich complete set of the product, which provides ease of transportation and storage. The hand-held circular saw has everything you need for work in the kit and is completely ready for use as intended.

Circular saws with stepless speed control

Circular saws are designed for making straight cuts when cutting different types of materials. The tool can be used to cut boards in the transverse and longitudinal direction, as well as composite sheet materials:

  • Plain and Bakelite plywood;
  • Chipboards and fibreboards;
  • Plastic;
  • Non-ferrous metals.

Circular saws with continuously variable speed control are electrically driven, and a blade with cutting teeth is used as a working body. The tool is powered from a single-phase household network through a cord with a standard plug.

The article provides an overview of the three most popular circular saw models from different manufacturers: Makita SP6000 Set, Bosch GKT 55 GCE and DeWALT DWS520K

Description of characteristics Makita SP6000 Set Bosch GKT 55 GCE DeWALT DWS520K
Rated power, W 1300 1400 1300
Output power, W 690
Disk rotation frequency without load, rpm 5200 6250 4000
Width, mm 341 310 303
Height, mm 250 240 265
Weight, kg 4.1 4.7 5.1
processing rates
Disc diameter, mm 165 165 165
Disc bore diameter, mm 20 20 20
Maximum cutting depth, mm 56 57 55
Angle of inclination of the cutting plane, degrees. 48 47 47
Functionality
smooth start there is there is there is
Getting started from anywhere (dive) there is there is
Motor overload protection there is there is
braking wire there is
Infinitely variable speed control there is there is
Connecting a vacuum cleaner there is there is there is
delivery set
Saw blade there is there is there is
Saw wrench there is there is there is
Case (suitcase) there is there is

DeWALT DWS520K model overview

The circular saw of the DeWALT trademark of the DWS520K model is distinguished by excellent quality of components and assembly. In addition to the product mentioned, the delivery set includes:

  • Disc for sawing wood with carbide tipped teeth;
  • Plastic case for storage and transportation of the circular saw and components;
  • Hex key L-shaped for disc change.

The main advantages of the DeWALT DWS520K circular saw are as follows:

  • The kinetic scheme of the saw plunge provides parallelism of the direction of application of force to the cutting plane. This provides complete control over the tool during use.
  • The downward movement of the saw is possible only after the lock is released, which ensures high safety of use.
  • A wide range of adjustments to the speed of rotation of the working disk from 1750 to 4200 revolutions allows you to set the optimal mode of cutting material.
  • The vibration level during product operation does NOT exceed 2.5 m / s2 and is easily damped by rubber pads on the control handles.
  • The start button is large enough and with a long stroke to work with gloves.
  • Well thought-out cutting depth adjustment mechanism with secure screw fixation.
  • The depth of cut when working without a guide reaches 59 mm, the maximum for a tool of this class.
  • The included blade ensures high cleanliness of cutting of various types of wood.
  • Provides high accuracy when cutting sheet material when using a proprietary guide.
  • The design of the guide allows you to make cuts on vertical surfaces.
  • The device has a removable battery, which ensures its autonomy in hard-to-reach places.
READ  angle grinder felisatti 125 with speed control

The disadvantages of the DeWALT DWS520K model are associated with ill-conceived disk protection, which quickly curls with sawdust without connecting a vacuum cleaner. High for branded equipment, and use without a guide is almost impossible. Consumers point to a lack of power when working with hardwoods.

Recommendations for choosing a circular saw with smooth speed control

The models considered in the review are quite consistent with their purpose. Hand-held circular saws Makita SP6000 Set and Bosch GKT 55 GCE are professional tools and can be used both in production and construction, and for personal needs. The DeWALT DWS520K model is designed for a wide consumer and, due to its characteristics, cannot be used for working with some types of wood and other materials of increased hardness.

In view of the above, we can recommend the Bosch GKT 55 GCE and Makita SP6000 Set models to those who are professionally engaged in construction, furniture and doors, as well as other types of woodworking. Circular saw DeWALT DWS520K is suitable for use in households when carrying out work with light and medium load on the tool.

Miter saw base with broach, saw table and its turning angles.

The support part of the device is a thick-walled cast aluminum base with a high-quality milled surface. The cheapest models also have a massive, but plastic base with a stamped steel pad.
A marking scale is made in its front part. Numbers can be cast on the body or printed on a steel ruler.

In the lower part, there are drips with holes for stationary rigid attachment to the workbench and supporting stops that increase the tool’s resistance to tipping.
When using a miter saw with a feed function, the saw unit Not only rises, falls, tilts, but also moves along the guides; the center of gravity is constantly changing.
Supports are arranged at the front to support the turntable clamping handle and at the rear. Can be made in one piece with the base and in the form of folding brackets.

Vertical stop.

Rectangular or trapezoidal element with one beveled part, which serves as a stop for the workpiece. It is implemented in two parts; often with length-guiding scales when sawing short workpieces or as a solid part of the base (budget versions).
On some devices, they move along the grooves to the side to free up space for the rig when sticking.

Table extenders.

Serves for better positioning of long boards. On inexpensive angle cutters, they have a U-shape bent upward, made of steel bar or tubes with a diameter of 8 to 12 mm.
In professional miter saws for wood, the end ends with an aluminum stand or a steel profile, with a fine adjustment mechanism to form one plane with the work table.
They are inserted into the holes on the sides of the support and are fixed with a spring-loaded mechanism or threaded fasteners. Easy to remove during transportation.

Workpiece clamping device.

Rigid board fixation allows avoiding vibration transmitted from the bed, increasing positioning accuracy and protecting the worker.
It is carried out with clamps of various shapes and designs (threaded, stepped, hinged), acting vertically (to the base) or horizontally (to the stop).

Miter Saw Rotary Table.

By pulling back the spring-loaded handle of the angle lock, you can move to the left or right horizontally following the head, which is rigidly connected to the rotary table. This means that when lowering, the rig will always hit and sink into the slot. The depth of immersion in the groove can be adjusted with a stop stop.
An oblong protrusion with such a slot, extending from the round section, in the facing with a broach is much longer than 280-340 mm compared to 80-180 mm in the tool without such an opportunity.

Most corner cutters rotate 45 ° to either side for facing. But there are models in which the maximum shift to the left / right is 47 ° / 47 °; 45 ° / 47 °; 47 ° / 60 °. Such small deviations from “half perpendicular” serve to fit in place beams and boards.
The fitting of the moving parts of a good saw should ensure that a given angle is clearly repeatable, i.e. When scrolling the turntable and returning to the previous position, the angle of the cut will not differ.

Rotation is performed by unlocking the handle, or, in its absence, by unscrewing the locking screw and aligning the pointer with the scale readings. It is convenient when there are many fixed values: 5; 10, 15; 22.5; thirty; 35; 40, 45 degrees.

Multi-feed miter saw, which one to choose. Service Center Tips.

How can you perform a Diagonal cut of a bar or board?

If speed is important, and not a clear correspondence to size, and the work is one-time, and not massive, then with a circular saw.
If the main thing is the accuracy of the parameters and their repeatability on several workpieces, then no device can be compared with facing.
The very name of the tool suggests that lumber is processed not along the length, but across the fibers. If the master picks up a circular saw in his hands, he can dissolve a board of any length, then the design of the angle cutter will NOT allow him to take a size larger than that laid down by the structure, several tens of centimeters.
The advantage of a side saw for wood is the ability to get a clear end of a bar or board at a right or any given angle and a high speed of production of identical workpieces.

Wood trimming with a broach 255mm Yato YT-82173. End saw for wood 210mmProton PDT-210. Cross-cut 305 mm with Holzmann KAP 305JL broach. Miter saw for wood 210mm Utool UMS-8. Miter-miter saw 305mm for wood JET JSMS-12L. Wood trimmer 305mm with Holzmann KAP 305ECO broach