Overalls For Working With A Chainsaw

Before we get down to business and specific recommendations, we note that all the instructions and tips that you will find in our article are general in nature. In the region in which you live, in addition to generalized standards, specific rules may apply that you must adhere to. Working with a chainsaw is a simple task, if you get used to it, but never lose your vigilance, this steel roaring beast can be capricious even in the hands of experienced craftsmen.

Chainsaw Video Tips

Also, the algorithm of your actions may vary depending on the model used, the manufacturer of the equipment. We will give you a general idea of ​​what and how to do it, how to work with a chainsaw, without fear of harming yourself or anyone else. At first it may seem that there is too much of this information, but practice plus the necessary minimum of sanity. and you will master all the wisdom of interacting with the instrument, feel confident.

Tip: if you are a beginner, try to start working with an experienced partner.

Overalls For Working With A Chainsaw

Equipment for working with a chainsaw

Before you saw with a chainsaw, or even take it in hand, you need to familiarize yourself with the instructions, and most importantly. take care of the safety of your life and health. The main point in this business is dexterity and overalls. Even if you just need to cut a couple of firewood for a fireplace, you should have protective equipment-uniforms on you.

    Hands and head. a protective helmet with a mask covering his face, and headphones, thick gauntlets made of hard material (suddenly what?).

How to use a chainsaw

With the equipment sorted out. About how to properly saw with a chainsaw, you will not know anywhere better than in the instructions. Take the time to familiarize yourself with the principles of operation of the main mechanisms of your tool. Our tips will help you work safely with a chainsaw, however, carefully read the user manual, controls and precautions provided in the instructions before starting work. We will not list the components. their list may vary slightly depending on the manufacturer, model and purpose.

Basic rules: you need to hold the saw firmly with both hands, tightly gripping the handle with all your fingers (the thumb of the left hand should be under the front handle).

  1. Equilibrium. Keep the saw closer to the case. so your hands will get tired less, you do not need to be afraid of the tool. In addition, it will be easier to maintain balance and control the process.
  2. Foot position. Arrange them widely, bending at the knees for stability, but keep your back straight.

Safe Felling Rules

Before cutting a tree, think not only about your safety, but also about whether surrounding objects and structures will suffer from the saw. Take a look: is there a highway, railway road, power lines, buildings nearby? If yes, think twice before starting work, perhaps, in this case, it is worth referring to professionals if you doubt your skills.

Video: Overalls For Working With A Chainsaw


If the place is crowded, use warning signs. you don’t want to harm someone by negligence, right?

Before you start felling, make sure you have enough fuel and lubrication.

  1. Determine the direction of the roll. Inspect the saw cut object, the area: the tree grows evenly or not, is there a slope of the soil where the wind blows. it will be easier to calculate the direction in which the tree will fall. Based on these data, you can facilitate further work. Numerous chainsaw videos posted on the Internet will help you at this point.
  2. We leave right: clear the earth around the tree from bushes, undergrowth and undergrowth, foreign objects. Nothing should impede your safe departure during felling. You need to clear the area at an angle of 45 degrees behind and on the sides from the direction of the fall of the tree.

There are many obstacles that can reduce your dreams of perfect chainsaw work to nothing. Sometimes something may go wrong, but in the case of felling trees, this “wrong” can cost you or someone else’s life. Therefore, remember your enemies in person:

  1. Rot. A rotten tree can behave unpredictably and fall not quite there or not at all where you assume. It is better to leave a professional to fight such an opponent. But once you’ve taken it yourself, remember: the tree looks unnatural, the trunk looks damaged, the bark is soft to the touch or discolored in places, most likely these are signs of decay. In this case, you need to increase the size of the file for greater security.
  2. Stuck driftwood and trees. If a tree is stuck catching another trunk while felling, you need professional help. Do not try to correct the situation yourself, call a specialist, but you can’t leave the tree unattended.
  3. Stuck Saw. If the tire is stuck in the trunk, do not rip it off, especially when it is running. Stop the engine, catch your breath and tilt the trunk until the chainsaw slides out.
  4. Rebound. In the hands of an unprofessional worker, a rebound can occur in almost any situation. Typically, the saw is fed up and back when the moving chain in the sprocket area of ​​the driven tire is in contact with another surface. In this situation, the chain brake should work, if this did not happen, do it manually. move the handle forward, you’re done, you’re safe.

The order of launching the instrument on video

A procedure such as starting a chainsaw is not difficult if you are consistent and careful. The algorithm is as follows:

  1. Set the saw on a flat, stable surface so that the chain does not come into contact with anything.
  2. Activate the chain brake by turning the handle away from you; otherwise, when starting, the chain will immediately begin to rotate.
  3. If your instrument model has a decompression valve, activate it as well.
  4. Pull out the choke lever.
  5. Place the toe of the right foot in the back handle, holding the front with your left hand. Quickly pull out the starter cord several times until the engine sneezes. Sneezed? “So the thing has gone.”
  6. Return the choke lever to its initial position and start the saw while continuing to pull out the starter cord.

After starting the saw and heating the engine, do not remove the fuse (brake) until you are ready to start sawing.

How to service a chainsaw

After work, make sure that the chainsaw is not damaged, all components are in good condition. If necessary, lubricate the chain, replenish the fuel supply so that the tool can be used at any time. Pay special attention to the chain brake, catcher and control levers, inspect the tool for damage, the degree of wear of parts, and the integrity of the mechanisms. Make sure that all the nuts, bolts and screws fit well, are tightly tightened. not only the success of your work, but also your safety depends on it. These questions are covered in more detail in the manual, which should be your desktop manual while you study.

Take care of your chainsaw regularly, ideally it should be inspected, cleaned after each use. For cleaning, you will need to dig into the inside of the chainsaw:

  • open the cover and clean the brake band;
  • inspect and clean the tire;
  • wash the air filter from sawdust and dust;
  • wipe cooling fins, ventilation holes;
  • Check flywheel blades.

Here are the main points that you should keep in mind when getting started with a chainsaw. If you follow the safety precautions and safety during operation, the results of the work will only please you, and there will not be any excesses. Be vigilant and prudent. and everything will be fine.

source
Chainsaws , ,