Patriot trimmer flies a candle what to do. What to do if floods a candle on a trimmer?

Why floods the candle in a gas station?

Wet sparkling candle or flooded candle is the main feature of either a non.working candle, the absence of high voltage voltage on the electrodes of the candle, or re.enrichment of the fuel mixture supplied to the operating chamber of the engine of the engine of the lawn mower. The engine of the benzotrimmer was opened in stages.

Understanding Floods

  • You need to turn the trimmer for the grass and drive out the starter for the release of excess fuel.
  • Unscrew and take out a candle, blow it, cleaning it, and leave it to dry until half an hour.
  • We only screw the dry part back and try to start the mechanism.

Why not hot trimmer for grass is not started?

As a rule, if the trimmer for the grass does not start hot, then the problem lies in the carburetor or ignition system. As for the carburetor, the fuel mixture often boils in it or the air is necessary to pay attention to the fuel filter, it does not clog, and whether it passes the air well enough.

When maintaining a standard engine of the lawn mower and a small.volume engine, you must check and (or) replace the spark plugs: once a season; every 25 hours of use; If your lawn mower or external power equipment does not start.

List of benzos and trimmers Patriot:

PT 2340, PT 2540 ECO, GG 262, GG 362, GG 562, GG 462, PT2540 Imperial, GG 224, PT 3045, PT 4555ES, PT 5555ES Country, PT3045 Imperial, PT 2540, PT3055 Imperial, PT 545, PT 555, PT3355 IMPERIAL, PT4355 IMPERIAL, T 530 PRO, PT 3055, PT 536J, PT 3355, PT 546J, PT 415

The list does not indicate all models of the repaired trimmers.

Attention! Before contacting the service center!

We ask you to inform the manager of our company in advance: the exact model of equipment. If you need spare parts for Patriot lawn mowers, you need to know: the brand of your engine; engine model; type of; The code located at the installation site of the carburetor, the spark plugs or muffler. The engine code is indicated by a line consisting of 3 groups (in each line 6-signs without additional quotes and stars).

One reason for a flooded lawn mowed.

After examining the main elements of the engine and a survey of the owner of the lawn mower, we still revealed the reason that led to such consequences.

The inattention of the operator, who perhaps accidentally touched the air damper control lever and transferred it into the working condition of “OFF”, in which the air supply was limited, implying the opening of the damper.

It is possible that the operator did not sufficiently understood the value of the indicators of the provisions of the “ON” and “OFF” damper, and was confused in this.

In a word, the human factor is present in all unpleasant situations that manifest during the operation of technology.

Cleaning the soundtress

Often the engine of branded models of trimmers stalls as a result of clogging of the soundtress. The main task of the specified component is to align the pressure in the ground

Diagnostics strategy

Where to start the diagnosis of malfunctions if a trimmer is not started for grass? In situations where the tool stalls immediately after starting, it is worth examining the following units:

It is the breakdown of the above locations that most often leads to the fact that a trimmer for grass is poorly started. Let’s look at how to eliminate such troubles.

Why is a trimmer not starting for grass (gasoline)?

Why is a trimmer not starting for grass (gasoline)?

Because he worked his. Why, this question may be as many answers. Poor fuel is far from an argument. Maybe a person does not know how to use it, so it starts not correctly. The fuel does not come, the candle is pierced, the wires are pierced, it does not turn on, does not know how to use it, the trimmer for the grass burned/broken, but there are still any other reasons can be. There are still such hooks.

The reasons why the gasoline trimmer for grass does not start can be several.

If the trimmer for the grass does not start or immediately stalls after the launch, then the problem may be in the fuel tank (namely as fuel), in the candle and the ultimate channel, in the air or fuel filter, in the saapon or the exhaust channel.

one). Be sure to check for the grass before starting a trimmer for grass, and most importantly and the quality of the fuel mixture.

2). A trimmer for grass may not start or stall with a flooded candle. It will need to be twisted and wiped.

Dry the channel candle for at least 3040 minutes. Otherwise, a new candle can also burst.

3). If a trimmer for grass starts without an air filter, then it is better to change the old filter for a new.

four). A trimmer for grass may not be started if the fuel filter is polluted.

5). Also, a trimmer for grass may be started due.

Also, the reason may be in the flow of dirt into the exhaust channel or clogging the muffle grid.

A gasoline trimmer for grass may stop starting for several reasons at the same time.

Firstly: try to clean the carburetor-its pollution leads to a breakdown of a gas station.

patriot, trimmer, candle, floods

Secondly: vacuum may form in the barrel. If so, try to make a small click in the barrel lid.

Thirdly: roll the correct settings of the trimmer for the grass.

patriot, trimmer, candle, floods

There are several reasons, as a result of which the trimmer for the grass will not start. I will list the main:

  • Poor fuel. For each model of a trimmer for grass you need gasoline with a specific octane number. Roll up with the operating instructions and make sure that you fill in the required.
  • flooded candles. At the same time, I advise you to check the candles for performance. Sometimes even new (in the box) candles can be inoperative or defective.
  • The fuel mixture does not enter the carburetor. Skip it a little.
  • The ignition coil failed.
  • The muffler is clogged. You need to free it from the haze. To do this, carefully disassemble and clean (can be burned on a gas burner).

Typically, the trimmer for the grass did not start after winter and we used to carry almost every spring a trimmer for grass to the workshop, where we were repaired. But, once, a knowledgeable person advised us in.the first, never leave gasoline in trimmer for the winter, because old gasoline may be the reason that the trimmer for the grass will not start, and he also said that the trimmer for the grass for the grass is necessary for the carburetor.fuel mixture. After we began to comply with these rules, our problems with the trimmer disappeared.

First of all, you can see the candle. If necessary, replace it, making sure that the candle is not broken and gives a normal spark. The next problem will be hidden in the fuel system. As mentioned above, check the tightness, then check the fuel filter, if necessary, change. Clean the carburetor, watch the effect. It will be necessary to delve into the ignition system, configure. To check the fuel system, you can pour several grams directly into the cylinder through the candles of the candle, screw the candle and try to start. At least a trimmer for the grass should make the sounds of a running engine within 1-2 seconds and a little smoke should fly out of the silencer.

This is interesting: how to reduce fuel consumption

If you do not start a trimmer for grass at all or immediately stalls after the start of the start, then you first need to look for the reason in the main nodes and units, for this you need to carry out the test in the following sequence, so this sequence: this sequence: this sequence: this sequence:

In these nodes, the whole problem may be consistent.

Useful material from which you will learn how to get a capricious gasoline trimmer for grass that does not want to work!

The summer time has come, and in the personal plots habitually hidden the lawn mower. Great tool, powerful and mobile. Using a gasoline trimmer for grass and grass, you can mow, and get rid of a dried.up weed. However, there are cases that the lawn mower does not start, works with interruptions or without developing full power. Of course, no one is at work! And as they say, you twitch the laborer’s handle more than the mowing.

Difficulties with the launch do not only have the types of motorcycle, but also in new. How to be in this situation? There is only one way out. to listen to the advice of experts and take advantage of their practical experience!

The performance of the spark plugs

If there is a need to figure out why a trimmer for grass is not started, then the state of contacts of the installed candle should be checked. In this case, you can figure out why the lawn mowing engine does not occur. For high.quality diagnosis of the spark plug, you must definitely adhere to the following scheme:

  • If during the dismantling it was found that the candle was wet, then in a small combustion chamber there is a certain part of the fuel, from which you do not need to rush to get rid of. To eliminate the problem, it is necessary to dry and carefully clean the contacts. After the manipulations done, you should carefully connect the candle. You need to turn on the ignition and without unnecessary efforts pull the starter handle. If the device is regular, then there will be a constant and bright spark. Otherwise, you have to replace the candle.
  • The state of involved electrodes can be considered ideal when they have a characteristic dark brown fog. If the candle has a white or even black soot, as well as wet, then it must be immediately replaced.
  • A trimmer for grass may not respond to launch due to the fact that there is too much gap between the contacts of the candle. To set the optimal gap, you need to use special multibody probes.

If, after all the manipulations done, the engine of the lawn mower did not start, then the cause of the malfunction must be sought in a carburetor or heat supply. Otherwise, you will have to check the serviceability of the involved high.voltage wire.

Main reasons

As practice shows, gasoline trimmers for grass cease to start or function normally after winter, that is, long.term seasonal storage. Before subsequent attempts to launch the tool, a thorough diagnosis should be carried out in order to determine the source of problems. There are currently several of the most common causes of malfunction.

Chinese lawn mower will not start. The candle is wet.

  • Initially, it is necessary to check the quality of the fuel. Savings in such cases may have extremely negative consequences. Experienced owners of Motokos and experts advise preparing a mixture, the volume of which will correspond to the upcoming work, since its surpluses quickly lose their qualities.
  • Trammers for grass of such eminent brands, such as, for example, Husgvarna, Makita, Stihl, are very sensitive to the fuel used. We are talking about fuel quality and octane number. Ensure suitable operating conditions and extend the life of the equipment will allow the refueling with high.quality gasoline.
  • At the time of the launch of an internal combustion engine, the lawn mower can stall due to the fact that it floods the spark plug. Often in such situations you have to deal with the need to configure the carburetor. It is worth noting that similar problems arise when a braid for grass stops starting on a hot.
  • Sometimes the tool cannot be launched, although the candle is wet, which in turn indicates the intake of the fuel mixture into the combustion chamber. As a rule, this is one of the symptoms that there is no spark. The reasons may be the absence of normal contact between candles and a high.voltage wire or drying out the threaded connection in the candle channel.
  • If there are no problems with a spark, and at the same time the candle itself remains dry, then most often this indicates that gasoline is not downloaded. There may be several reasons in this situation. This, in particular, is about the state of the fuel filter and carburetor.
  • ICE of braids for grass is not started or immediately after launch stops working, which can be due to clogging of an air filter that prevents the normal supply of air necessary to enrich the mixture.

Read how to wind a line for a trimmer for a benzotrimer

In addition to all of the above, owners of trimmers have to deal with more serious troubles. One of these is the wear of the piston group. In such cases, to entrust professionals, which will significantly reduce expenses and extend the life of the tool.

Electric trimmer for grass vibrates

Many mowing users noticed that some time after the start of the apparatus, it begins to vibrate very much. On some trimmers, mainly in models more expensive, an anti.vibration system was installed in the form of shock absorbers seized between the engine and the bar. But in some cases, even she does not save from strong vibration. The reason that strong vibration appears in the trimmer, there may be a small amount or complete absence of lubrication on a hard or flexible shaft located inside the rod of the apparatus.

  • unscrew the gearbox located at the bottom of the bar;
  • After removing the gearbox, you will see the end of the shaft, for which you need to pull to extract the part;
  • after extracting the shaft, it must be abundantly lubricated with a special lubricant “Shrus-4” or ordinary-“Litol-24”;
  • Apply a small amount of lubrication to the shaft and evenly smear it along the entire length of the part, including the slots at the ends of the rod (if they worked, the shaft will have to be replaced);
  • After lubrication, insert the shaft back into the bar and put the gearbox in the same place.
  • unscrew and remove the mowing head;
  • remove the bar from the electric motor by unscrewing a couple of bolts;
  • Pull out a flexible cable from the bar;
  • Lubricate the cable with grease along the entire length.

This is done like this: first you need to lubricate the end of the cable, and then insert it into the bar, after which, as it moves into the pipe, you should apply grease to the part and evenly distribute it on the surface. Then insert a bar with a flexible shaft into an electric engine and fix it.

In the event that the lubricant did not help, and the vibration continues to appear, you will need to change the flexible shaft.

Checking the fuel mixture

Suppose you don’t start a trimmer for grass. In this case, the first thing is to check whether the fuel is enough in the tank, as well as evaluate the quality of the fuel mixture. To refuel a motorized unit, it is necessary exclusively high.quality gasoline. It is recommended to use fuel, the brand of which is not lower than AI-95. Refueling a trimmer for grass with fuel of unknown origin, not bought at a gas station, is fraught with frequent failures in the work of the tool. This can cause a breakdown of the cylinder-piston system. Repair in this case often exceeds the cost of the device itself.

Why is a trimmer not starting for grass gasoline? Incorrect preparation of the fuel mixture may also lead to this, which consists of oil and gasoline. The proportions in which the specified components are connected are indicated by manufacturers in the guide for the operation of a trimmer for grass. Preparing the fuel mixture is extremely not recommended in large volumes, that is, for the future. Indeed, with prolonged savings, there is a loss of the determining properties of the substance. Therefore, if a trimmer for grass does not start, it is worth draining the old fuel and use freshly prepared fuel mixture.

Diagnosis of the candle channel

What to do if the used fuel mixture is in perfect order, but a trimmer for grass is still not started by gasoline? The reasons for the refusal of the mechanism may lie in excessive moisture of the candle channel. To diagnose and eliminate the problem, it is necessary to do the following:

  • To twist the candle. Wipe it thoroughly, and then dry it.
  • Drain excess fuel in the chamber through the corresponding candle hole.
  • Clear the old candle if there is a dozen on its surface. Cope with the task will allow the use of a conventional ladies’ nail file or file.
  • When installing the element in place, set a gap of 1 mm. What are the causes of the breakdowns of the cavity device of the chainsaw, why the chainsaw is not started and how the malfunction will eliminate. Why doesn’t start for which the trimmer does not start for grass and you have a gas station. To check the parameter, it is enough to place any coin in the lumen.
  • Collect a functional block back.
  • Try to start a trimmer for grass.

It is recommended to perform a candle channel to dry for at least half an hour. However, in no case should you resort to the calcination of its elements. After all, heating the spark plug can lead to its final corruption. Что предпринять, если обслуживание функционального блока было выполнено в соответствии вышеуказанным рекомендациям, но триммер для травы не заводится, искра есть при этом? In this case, it should be treated with gasoline threaded connection. The latter does not need to be saturated abundantly fuel. It should only be slightly moisturized. Resort to such actions should be to ensure the ignition. The gasoline trimmer for the grass does not start? Reasons and decisions on. After all, no matter how much the candle gives a strong spark, in an absolutely dry chamber there simply will not be something to ignite.

Why the lawn mower is not started? Diagnosis of trimmer faults for grass

In this video, we will try to consider the main malfunctions that occur during the operation of the motorcycle.

Practical tips for eliminating faults. From personal experience.

If even in this case a trimmer for grass does not start, it is worth evaluating the quality of the contact between the high.voltage wire and the candle. In the absence of a spark (in the presence of a reliable connection between the indicated elements), most likely, the problem is caused by breakdown of the ignition unit. In this situation, you will have to turn to the services of masters who will reinstall the knot.

patriot, trimmer, candle, floods

Diagnosis of malfunctions

The lawn mower cannot work for a long time. Gearbox and engine will overheat. Mowing no more than 15 = 20 minutes, taking a five.minute break. At a sultry afternoon, the operating time is halved. When mowing weeds, sedges of work, it is required to reduce the time.

With a unsuccessful launch, we begin to look for the reason for the refusal:

  • Check the quality of the fuel,
  • verify the operability of the candle and the purity of the candle canal,
  • check the cleanliness of the air filter,
  • make sure that the fuel filter is not clogged,
  • Check the cleanliness of the saapun,
  • Clean the exhaust channel.

Floods 101 | National Geographic

complex reasons will be detected in the diagnosis of a malfunction, leading to the overhaul of the carburetor. Such reasons include clogging of the internal channels of the carburetor, wear on it gaskets and violation of the tightness of internal halls with a vacuum loss. DIY lawn mowing repair, if it does not start, will require patience.

Need help, advice, Hy 30 is not started to hot.SS

If the fuel itself goes back, then it is likely that the pressure in the highway is guilty (then excessive. insufficient) and it seems to be connected either: a) with the temperature. Maybe when driving boils fuel in the carba from overheating of the engine? What is the temperature after a long ride? b) or over time. Then it is possible that something was clogged somewhere. Not deadly, but still. For example, an air filter (dust, excessive amount of oil on it), drainage in a cork of the tank, fuel filter, the fuel tube is overheated, etc.P. As a result, it sucks the funny, but it quickly cannot)))) or maybe the fuel tube is broken, then on the contrary it sucks the air instead of fuel. On cold, it can be better squeezed out and does not suck so much, but on hot siphonite.

PS purely from theory, a hot engine is more difficult to start if the mixture is too rich. And to start a cold engine, on the contrary, this is a plus. Turn out the candle and if it is all in a halter or flooded with fuel, then you need to poor. And try the Iridium candle. With a problematic engine, it works a little better, especially with overflow.

If the fuel itself goes back, then it is likely that the pressure in the highway is guilty (then excessive. insufficient) and it seems to be connected either: a) with the temperature. Maybe when driving boils fuel in the carba from overheating of the engine? What is the temperature after a long ride? b) or over time. Then it is possible that something was clogged somewhere. Not deadly, but still. For example, an air filter (dust, excessive amount of oil on it), drainage in a cork of the tank, fuel filter, the fuel tube is overheated, etc.P. As a result, it sucks the funny, but it quickly cannot)))) or maybe the fuel tube is broken, then on the contrary it sucks the air instead of fuel. On cold, it can be better squeezed out and does not suck so much, but on hot siphonite.

PS purely from theory, a hot engine is more difficult to start if the mixture is too rich. And to start a cold engine, on the contrary, this is a plus. Turn out the candle and if it is all in a halter or flooded with fuel, then you need to poor. And try the Iridium candle. With a problematic engine, it works a little better, especially with overflow.

Trimmerstihl FS 38

Warranty, month 24 months
The weight 4.1 kg
Class Domestic
engine’s type Two.stroke
Type of motorcycles household
Engine power, l.With. 0.9
Engine power, WT 650
The volume of the cylinder 27.2
Maximum recommended engine speed 9500
Cooling system Air
The volume of the gas tank 0.33 l
Starting system Manual
The performance of the bar curved
Cutting system Trimmer head
Detaless shaft No
Lever D-shaped
Height adjustment Not

Gasoline trimmerstihl 38. The smallest, compact and most economical.economy trimmertmstihl. With the help of this mototorimmer, small lawn areas can be banged, but the main area of ​​application is the mowing of grass, after the main haircut, near the walls, borders or trees, where an ordinary lawn mower cannot reach. Standardly equipped with a trimmer head with fishing line and goggles.

To facilitate the launch, the STIHL FS38 Motorimmer is equipped with a primer. With it, you can manually pump up fuel in the carburetori thereby reducing the number of launching jerks.

To facilitate the work, all motorcycles and bassoresistihlos are softly shoulder straps. They allow you to work longer, but at the same time retain more strength, as well as provide greater freedom.

Stihl FS 38 Motokosa is launched by stretching the starter cord. Thanks to the Elastostart system, the launch occurs evenly, without shocks that load the joints and hands. A special damping element Elastostart in the handle significantly reduces these harmful effects.

All engine control levers are now on the same handle. This facilitates the operation of the STIHL FS 38 motorcycles, since all control is carried out with one hand

Serial equipment of a gasoline trimmer for STIHL FS38 grass:

https: // https: // tehnika.Expert/Dlya-Sada/Trimmer/Neispravnosti-Ustranenie.html https: //

Primary checks of the ignition system.

Ahead of time, before testing the ignition module, check the properity of the subsequent parts of the chain:

  • Candles and switch
  • The condition of the candle cap: should be tightly attached to the candle, the high.voltage wire is aggressively fixed and does not even fly out of the cap and coil, the matteral of the cap does not contain cracks
  • The high.voltage wire is not damaged over the entire length, the contacts and connections of the wires are dense and do not even have traces of corrosion
  • visually evaluate the absence of cracks and visible flaws on the reel body
  • pollution of conductive parts and nodes remove
  • By the ability, change refueling: you will like gasoline bad

The meaning of these actions is to exclude the elements of the chain from the list of probable defects to our client, not counting the coil. If our client remains in order to move on.

Most modern models of chainsaws and trimmers for grass do not require installation of ignition time. This angle is determined by the position of a special groove on the flywheel for the key groove to the crankshaft and magnets installed on one flywheel.

It is only necessary to correctly install the gap between the flywheel and the ignition coil. Depending on the model of the tool, the gap can be different. This is usually 0.2-0.4 mm. Since the flywheel is round, the usual automobile probe will not work for this purpose. It would be technically reasonable to expose the gap with a special template.

But it can not always be purchased. The acquisition of such an expensive template for one.time use is unreasonable. Instead of a corporate template, you can use a strip of plastic bottles of water. Cut the strip from the bottle in a place where there is no embossed embossing. Then the actions to install the clearance are approximately the same for the chainsaw and trimmers:

  • Loosen the ignition fastening bolts.
  • Direct the magnets on the flywheel to the ignition coil
  • Clamping the flywheel between the flywheel and the coil, tighten the fasteners.
  • Remove the strip
  • Scroll the flywheel 360 degrees several times, making sure that it does not cling to the reel anywhere.

All. The gap between the coil and the flywheel is installed.

is impossible and impractical. Below is a list of ignition coils that can be purchased on our website


The Denso brand produces not only the spark plugs, the assortment is also full of oil filters, fuel pumps and many others. For many years, Denso has been steadily occupied by its leading position in the market. The company was founded in the distant 1949.

All the spark plugs are produced according to the quality standard, the products are constantly updated, which can please motorists. These Japanese candles were tested by time. during the testing of them, 18,000 km was passed. everything is fine.