Shovel on a single-axle tractor Neva with their own hands

How to make with your own hands

If you already have a single-axle tractor, then you may well make this structural addition with your own hands. The most common way people buy a Neva brand unit.

To assemble the blade you may need the following materials and tools:

  • a bucket from an old and unnecessary shovel;
  • A sheet of iron with a thickness of at least 2-3 mm;
  • tin barrel;
  • knife;
  • angle grinder;
  • welding machine;
  • An electric drill and a rotary hammer.

This list can be expanded with additional materials, depending on which version has been chosen. For example, this list can be expanded with the following materials:

  • rack;
  • Tin strip 5 mm thick;
  • Stiffening ribs with a thickness of 3-4 mm;
  • eyelets for the traction bracket;
  • Drills, washers, nuts and bolts (M12,M10, and M8);
  • The boom with a length of 520 mm;
  • sheet of rubber, etc.д.
See also  How to Cut a Wide Ceiling Plinth

After completing the preparatory stage in terms of finding the necessary tools and materials, you can begin assembling the blade shovel with your own hands.

How to make a moldboard on a single axle tractor with their own hands

When making the attachment yourself, you must first carefully study its construction. Presented photos, drawings of the blade on a single-axle tractor with their own hands give only a visual idea of the design. It is optimal to first consider the snowplow device in reality. To do this, you can visit a retail outlet or ask to take measurements from the moldboard from a familiar owner of the equipment. When there is no such a possibility, you need to be prepared for the fact that during the work there may be errors that will have to be corrected.

Blueprints for a power tiller with his own hands

You can find a lot of diagrams on the Internet or in literature, but they all look pretty much the same. This is due to the simple design of the shovel. Nothing unnecessary should be invented here. For example, the drawings of the blade for the “Nevapower tiller with their own hands will be similar, as for the “Zubr”, “Zirka. Minor changes may be only in the design of the coupling.

See also  How to convert a cordless electric screwdriver from the mains

The drawing will help to make a shovel with a hydraulic elevator In the absence of hydraulics elevator make lever, such as from a spring

Attaching the homemade snow blade to the power tiller

Usually the weight of the blade does not exceed 20 kg. It can be suspended from any single-axle tractor. Depending on the model of the machine, the connection of the linkage is provided by the manufacturer to the front or rear. In the second version, the steering column of the power tiller has the ability to rotate by 180 o.

To connect the attached equipment, each unit is equipped with a coupling. It can be adjustable and non-adjustable horizontally. Even the coupling differs in configuration for each brand of power tiller. Examples of the most common models are shown below

shovel, single-axle, tractor, neva, their

СТАНОК не хуже заводского. Своими руками. The machine is no worse than the factory.

Each motoblock manufacturer in the manual describes the nuances of installation of attachments. Recommendations are worth following.