Snow clearing attachment on a single axle tractor

How to choose a factory snow blower for a power tiller

But it also happens that, after looking at instructions and diagrams of how to make a snowplow on a single-axle tractor with your own hands, you have come to the conclusion that such an activity is not for you, and it will be much easier for you to buy a ready-made device. However, the of snow plow attachments on motorblades, as well as their characteristics, differ markedly from one another. Making the right choice is not always easy. As an example, let’s consider the most popular variants, which are in the greatest demand today.

Today’s market offers many different designs of attachable snow shovels for power tillers

Snow blower for power tiller Salyut: characteristics and features

Snow plough attachment on the Salyut single axle tractor allows you to clean the ground from the snow at temperatures from.20 to 5°C. Recommended for use only on flat surfaces, and can be purchased in two different modifications, which differ from each other how to attach to the tiller.

Main technical characteristics and parameters:

• Dimensions. 600h640h820 mm;
• the width of the surface capture. 500 mm;
• maximum snow layer that can be captured. 17 cm;
• auger rotation speed. from 1900 to 2100 rpm;
• weight. 60 kg.
• The working part of the construction, the auger, rotating, rakes the snow on its way from the edges to the center;
• Special blades, located in the center, promote the snow into the nozzle of the body;
• The snow is then thrown to the side.

The snow thrower for the Salyut power tiller is recommended for use on level surfaces

This model is available quite a few adjustments, including the range of throwing snow, which can be changed using the visor, as well as engine speed. You can also change the direction in which the snow is thrown by turning the screen.

Installation of the snow thrower on the single-axle tractor Salyut is made as follows: the step of the power tiller is detached, the cotter pin and the axle of the footstep are taken out. The snow blower is attached to a single-axle tractor on level ground. To do this, insert the hitch into the frame so that the bolt with the spacer sleeve goes into the slot of the hitch. After that, connect the hitch to the snow thrower body with two bolts, without tightening them.

After that it is necessary to put on a belt drive snowthrower, having previously removed the protective cover of the pulley of the power take-off shaft. By moving the hitch on the beam, adjust the mutual position of the elements so that the belt is hooked evenly, without distortions. After that you can tighten the bolts. Next, the protective cover of the PTO shaft pulley is installed in place and fastened.

Attachment mounting diagram of the power tiller Salyut

MTD snow blowers: which model is better to choose

Another popular option to avoid making a snowplow on a single-axle tractor with your own hands is to buy special equipment made by MTD. Today it is considered one of the best, and has a fairly wide range of models, the most popular among them MTD-M 61, MTD-ME 66, MTD-640 and MTD-M56.

After getting acquainted with the technical characteristics, as well as the main tasks that these devices are designed to solve, you can easily determine which option is best for you. For example, the model M-61 is excellent for clearing large flat surfaces, while the ME-66 is more oriented to difficult weather conditions and serious icy drifts.

A little more expensive will cost ME-61. about 49 thousand. rubles. An average option can be considered M-61. 44 ths. rubles.

Snowplow machine made by MTD

Tools for making your own snow removal equipment

Any work can only be done with tools, so it is desirable to have:

• Electric drill. without it, it is impossible to make holes of a given diameter in the right places;
• a riveting tool. it will help to create strong, permanent joints in the sheet material;
• electric welder. will be required for welding the frame, as well as individual units;
• Angle grinder. will be used for cutting blanks of steel, as well as stripping welded joints;
• metal scissors;
• measuring tool. used for marking and controlling the parameters of the parts, as well as the whole snowplow (usually a caliper, a tape measure and a ruler are enough);
• hand tool for fixing parts and temporary fasteners. will allow you to perform work qualitatively and with a minimum of effort;
• staple. even the simplest one, made of wooden planks, will help simplify the assembly process, the construction of the snowplow has a spatial design, which must be assembled by fixing individual parts and assemblies in different places.

Rating of manufacturers

Currently the market offers a large number of models of snowplows and snowthrowers, which are compatible with cultivators and tillers. Experts have made a rating of the most popular and popular machines.

Husqvarna

The snowthrowing equipment of this Swedish brand is popular in many countries around the world. This is due to its reliability, practicality high performance and ease of maintenance. It can be used even at very low temperatures and in extreme conditions, which is explained by the Smart Start function and the rubber auger. Characteristic features of snow blowers are:

• The effectiveness of work even on very dense soils;
• Excellent maneuverability;
• Long service life;
• Compact size;
• Easy to control;
• Remote-controlled swivel chute;
• easy maintenance;
• Reliability;
• Versatility.

Among the most popular models of snow blower equipment of this manufacturer are ST 124; ST 224; ST 324; ST 230; ST 227; ST 427T and some others.

Patriot

Snow cleaning equipment of this manufacturer combines practicality, efficiency, economy and high safety level. These are the main points on which Accent is made in the production of equipment. Gasoline engines in particular are designed for long life, and electric motors have double insulation. The top seller is the Patriot PS 603 E.

Champion

The snow removal equipment of this manufacturer is widely used by utilities, commercial and municipal enterprises, farmers and private individuals. One of the main advantages is its high productivity. In addition, Champion snow blowers can handle almost any task, regardless of weather conditions. Sales hits in 2020. ST656BS; ST861BS; STT1170E; ST1170E; ST1376E; ST1170BS.

One of the most famous manufacturers of garden equipment, which produces a wide range of snow removal equipment (the company was established in 1932).). In the company’s catalog you can pick up a model of snow blower for different operating conditions as for a small private home, and for large industrial facilities and utilities. According to the sales results for the past year 2020. The most popular models were the following MTD Optima ME 76; MTD M 61; MTD ME 61.

Hyundai

Hyundai snow removal equipment is in demand among owners of private homes, country cottages, retail outlets. The advantages of snowthrowers of this brand are efficiency, practicality, high speed of operation and long service life. This is accomplished by:

• Absence of an air filter;
• Heated carburetor;
• Extended (oil) valves;
• The presence of an automated decompression valve;
• Effective protection against overheating.

All of these features are designed to keep you productive even in the toughest conditions. For example, a carburetor heater prevents the formation of ice crystals at sub-zero temperatures from jamming the flaps. No air filter increases engine efficiency and fuel combustion efficiency.

Salute

Snow blowers combine simple and reliable construction, affordability and ease of operation. The most popular model of this brand is the Salut CM-0.6, which perfectly copes with the cleaning of loose snow and loose masses. The throwing distance can be up to 10-12 meters. Technique, as standard, is equipped with a reinforced auger that easily copes with the ice crust and even debris. Special snow blades can be used in place of the auger. The snow mass is thrown away through a special nozzle. Control elements of the drive, located on the handlebar of the snow blower, snow blower chain is covered with a metal cover and is located in the front end. Safe and comfortable guidance of the machine is ensured.

Megalodon

The equipment is characterized by high reliability, good performance and a reasonable price. Thanks to the auger is made of quality domestic steel of sufficient thickness, it can easily cope even with icy and frozen snow. Another plus is the versatility. the attachment is compatible with most models of power tillers. The gearbox is characterized by good functionality and a large reserve of motor life. Equipped with imported engines (rated at 6-10 liters), these shovels are perfect for use on small farms.с.) that are easy to start, even in extreme cold. It is the optimal solution for small farmers and contractors as well as private households.

Neva MB

Snow plough attachments of this series are widely used in different regions of Russia. Designed for simple construction and reliable operation. All elements are factory-made with modern technology and high-strength materials. thanks to this high productivity and reliability of the equipment, safety of operation and easy maintenance.

Types of blades on a mini-tractor

This attachment is used for clearing snow and ice in a household. Minitractors with a shovel are actively used in municipal and construction. In the latter case, they are used to evenly distribute crushed stone or sand.

There are two main types of this equipment:

Rear blade on the minitractor. In this case, the equipment is rear-mounted. Start-up is performed by attaching the unit;

Shovels differ from each other according to such qualities:

After installing the blade on the minitractor, you need to choose the angle at which you will work. For cleaning roads, an acute angle is suitable, for work on large areas the right angle is more suitable.

If you have the necessary tools and materials, you can make a moldboard for snow on a mini-tractor with your own hands.

Snow blower from a chainsaw or grass trimmer

Units of this type can not be found in stores, so you can only make such a snowmobile yourself or order its construction to a skilled mechanic.

The advantage of the snowplow from a chainsaw or grass trimmer is the maximum simplicity, because it consists of:

Motors of a chainsaw and grass trimmer operate in the same modes and are comparable in:

At the same time, neither on the chainsaw, nor on the grass trimmer is not put:

That’s why you need a home-made or commercially available gearbox with a ratio of not less than 1:4.

The easiest way to make such a reducer from:

Sometimes they make a double reducer, that is, the secondary shaft of the first reducer is welded to the primary sprocket of the second reducer.

This scheme is used if it is necessary to clean:

Turbo Snow Removal! Direct Attach vs. Loader Attach Front Blades for Compact Tractors

A snowplow made from a chainsaw or a grass trimmer is not equipped with an auger. The installation of an auger greatly complicates the machine.

In terms of efficiency, such a snowplow design is inferior to an auger rotary, but its manufacture is as cheap as possible.

Lack of propulsion (the need to push the machine forward by oneself) is compensated by the simplicity of manufacturing.

After all, anyone who knows how to use a snow blower can make such a snow blower:

After all, in most cases the reduction gear is made of:

Here on this site they talk in detail about the manufacture of such a unit, as well as the necessary for this:

Criteria for choosing a snow blower on a single axle tractor

The first condition is compatibility with the model. There are power tillers with the right-hand pulley arrangement, it is impossible to attach a left-handed snow thrower to them.

Mothballs with a capacity of 9 liters and more.с. cope with the load with any snow blower attachments that are sold for this particular equipment. With a capacity of about 7 liters.с., you should choose equipment with a narrower and lower grip.

Use a low-powered power tiller (less than 6.5 l.с.) is not recommended for use with a snow thrower attachment.

It is important the manufacturer’s reputation for quality. To get an idea, you can study the objective reviews on the network and from acquaintances who have experience using such equipment.

When making a personal choice in a store, it is advisable to inspect the product in detail. The rotor and pulley must not jam, play or make any noise (squeak, knock) during rotation. The metal should not bend at the slightest effort.

Snowplow for the Neva power tiller

A snow blower bulldozer for a power tiller with your own hands Neva is probably one of the most popular options today. Such a design will be quite easy to assemble, and most importantly. very effective in operation. All you need to do is to choose and install a snow blower on a single-axle tractor Neva.

Snowplow attachment on the single-axle tractor Neva can be made on your own or buy ready-made

However, it is the price of the snowplow attachment on the single-axle tractor Neva that often becomes a stumbling block. Depending on the model, its For this reason, a fairly common phenomenon. homemade models. Let’s take a look at three of the most popular options:

• A bulldozer attachment for a snow blower on a Neva power tiller. The price of such a variant in ready-made form will be quite high, while to make everything with your own hands is simple enough, and the result will not be inferior to the factory device. Using a special adapter, the nozzle is attached to the motor-block as a bulldozer. In this case, a metal sheet with a sharpened end, also called a knife, is used to break the snow cover. The snow cover is literally cut by the device, and then simply removed to the side;

The simplest option is to use a blade on a single-axle tractor to clear snow

• the second option is more difficult to implement, and will require drawings. However, if you choose a suitable scheme, and have at your disposal a welding machine, it is possible to make a very convenient and productive snowplow. The principle of operation of such a snowplow for the motorblock Neva with their own hands is as follows: as in a ready-made rotary nozzle, there is a box, an auger and a pipe, which is responsible for throwing the snow. This two-stage system allows for maximum efficiency of the device, but its manufacture will require a little more time and effort;
• The third option. a fan snow thrower. The mechanism of such a device is similar to the principle of an ordinary fan. Special blades rake up the snow, which is immediately thrown at a certain distance through the pipe. Despite the apparent simplicity, this option is quite complicated for independent implementation and requires certain skills. But if you have enough free time and desire. it is quite possible to give preference to this method.

Drawing snow blower for the motor block Neva

What is better to buy a snow blower for the motor-block Neva or make it yourself?

Definitely give an answer to the question of what is better to buy a ready-made snow blower or make your own. it is difficult. On the one hand, the purchase of the factory model is not cheap, and often not affordable to the average user. But on the other hand, making such a device is not always easy for those who have not previously encountered such a task. It requires a certain amount of skill and effort. So before you decide in favor of one or another option, it is better to judiciously assess your capabilities.

Such a device as a mounted snow blower for a Neva power tiller requires maintenance. Otherwise, its operating life will be short regardless of whether you bought it or made it yourself. First of all, conduct regular inspections of all fasteners, and retighten them if necessary. In addition, it does not hurt to regularly check the condition of the bolts and belts to avoid breakage during operation.

Ready-mounted snow thrower for the motor-block Neva

Installation and rules of operation

Attaching the snow blower to the tiller

Before installing the snow blower on a single-axle tractor, read the factory manual. When operating, choose the speed of movement, observe the adjustment of the guiding canopy, so that the flying mass does not harm passers-by and the windows of buildings.

Before shoveling snow, mount the implement on a special trailer unit on the frame of the tractor. Algorithm of action:

• If the hitch is made in the form of a bracket, you need to remove the pin, attach the nozzle and insert it back. fix the construction with bolts.
• Remove the pulley guard on the PTO. Use a V-belt to connect the PTO drive to the drive pulley on the snowplow head. Apply the required tension using the tension adjuster.
• Put on the protective cover and manually check the absence of friction by turning the mechanism.
• You can get to work. Do not forget to periodically check the reliability of the coupling, because human safety depends on it, as well as the performance of the machine.

How to make a snowplow from a power tiller

Users are mainly interested in such questions:

• Is it possible to construct a snowplow from a ready-made power tiller?
• How to make a snow shovel with your own hands.
• Is it possible to make an auger snow scraper attachment on your own.

On the Internet you can find many options for solving these issues, for example, we offer to get acquainted with the drawings of motoblade snow scraper with their own hands:

And now study the drawing of the rotary snow-clearing attachment, there are videos on the Internet, showing and telling all the stages of creating such a canopy: