STIHL fs 38 how to wind the line

Preparing to change

To make it clear, the mowing head (bobbin) was removed from the brushcutter. No need to remove it to change the line. it is in place. It doesn’t take much time.

Dismantle the grass trimmer bobbin, it is held in place by a latch. latches. The cover is removed by pressing on the catches. If you can’t do it with your hands, use a screwdriver.

The operating principle is as follows. Pressing the button, the spool is pressed on the spring and comes out of the retaining grooves in the cover of the bobbin. Hold it in place and twist the spool to change the length of the line. When the button is released, the body spring returns the spool to its original locked position.

On the bottom of the spool there are a few holes for different line diameters. They can be different from one trimmer manufacturer to another. In some cases (like here) they are signed, in others they are not.

These holes are needed to hold the line in place when changing it. After winding the line on the reel, the line ends are inserted into the holes. This is to ensure that the line does not unwind at the moment of installation of the reel in the body of the grass trimmer. In other words, it makes it easier to change the line.

There are models with no indication of the diameter of the consumable. Then in order to find out what maximal line diameter can be used, they are tried on by the holes in the line lead out of the grass trimmer’s bobbin case (see “holes in the trimmer’s spool for grass”). figure below).

The reel has two sections for the fishing line, separated by a partition. They may not be present. They are only needed to distinguish and facilitate the winding of the consumable.

First determine the required line length. The latter is wound into one of the sections of the spool so that it does not extend beyond its limits. In this case winded 3 mm, a length of about 2 meters. Т.е. You need 4 m section for 2 sections. that’s for the 1st method. The second method requires two 2-metre sections.

Now you need to know which way you have to wind it. For this purpose, many manufacturers of trimmers on the coils have special designations such as in the figure below.

How to recharge the mowing head for STIHL FS 38 brushcutter

If no such markings were found, you should pay attention to the bobbin case. There’s always an arrow to indicate the movement of the mowing head. The fishing line is wound in the opposite direction.

How to choose the right brushcutter for you

STIHL FS 38 and STIHL FS 55 amateur brushcutters.

The STIHL FS 38 and STIHL FS 55 amateur brushcutters are designed for individual garden maintenance in small gardens. Such brushcutters become indispensable assistants if you need to give order to the territory where it is impossible to use a wheeled mower, for example, places under trees and bushes, near flower beds and fences.

The STIHL FS 38 and FS 55 ride-on mowers offer the same advantages as all STIHL ride-on mowers.They are covered in the video Features and benefits of all STIHL petrol brushcutters.

Features of the STIHL FS 38 brushcutter:

The STIHL FS 38 is equipped with two handles. one integrated in the housing and on which the controls, ignition switch and throttle trigger, are located. and a height-adjustable rotary handle attached to the handlebar. Compact loop handle and curved boom for easy maneuverability. The STIHL FS 38 brushcutter has no gearbox and is therefore called the budget model. The STIHL FS 38 comes standard with a comfortable mowing head. No need to remove and disassemble the mowing head to refill the line. The STIHL FS 38 can be upgraded with a mowing head with plastic blades for faster working in tough grass, and a reinforced DuroCut mowing head. Safety goggles are included with this brushcutter.

Features of the STIHL FS 55 petrol trimmer:

The STIHL FS 55 lawnmower is equipped with a two-handed handle mounted on a straight boom, the precise adjustment of the handle in all planes allows the machine to be individually adapted to any user. All the controls for the brushcutter are integrated into one multi-function handle. One-handed operation for basic functions. starting, operating, stopping the engine. The STIHL FS 55 brushcutter is fitted with a maintenance-free gearbox. Gearbox is permanently lubricated. The STIHL FS 55 is equipped as standard with a twin-blade blade. The brushcutter can optionally be fitted with four- and eight-blade metal blades, a mowing head with a line and a mowing head with plastic blades. The STIHL FS 55 also comes with safety goggles, a shoulder strap and combination wrench.

See also  How to Cut Springs Properly on Prior

Both of these grass mowers are powered by a simple and robust STIHL two-stroke engine with a mix of petrol and motor oil. This engine provides:-easy design, operation and service;-high rpm;-high torque;-service position, where it is more convenient to change cutting headsets, wash the guard and gearbox.

Stihl FS 38 trimmer line how to re spool.

All STIHL products are covered by a one-year warranty. Warranty and after-sales servicing is available at all STIHL servicing dealers. To find out more about a STIHL machine, contact your nearest authorized dealer for detailed advice and to buy the model you like.

One of the advantages of this home-use model is the clever selection of components. It is powered by a durable 2-stroke 1-cylinder petrol engine with long durability and an impressive power reserve. The engine is equipped with an improved ignition system which, together with the sturdy hand starter, makes starting the engine easy and protects the parts from wear. To be able to work with the trimmer in late autumn and winter, the manufacturer has a pump for manual pumping of fuel.

The STIHL FS 38 is equipped with a robust D-handle that makes it easy to operate and maneuver. Height of handle can be adjusted as required. The STIHL FS 38 Grass Trimmer has an ignition switch and throttle lever on the right handle. for easy operation in hard-to-reach places.

The shaft that transmits power from the motor to the gearbox is housed in a curved, non-disassembled rod. It is notable for its resistance to shocks and impacts. The gearbox of your STIHL brushcutter is made entirely of forged parts. It can be quickly taken apart if needed, so you can replace worn parts.

The STIHL FS 38 brushcutter comes standard with the AutoCut cutting attachment. It ensures a good grip and a smooth mowing line. The sturdy STIHL mowing head withstands rock impacts, and the line from the German brand successfully cuts through weeds and bushes.

The STIHL FS 120. Gearbox Lubrication. Filling up the lines. Setting the blade.

stihl, wind, line

Maintenance of the STIHL FS 120. Gear lubrication, line fill without removing the spool and installing the blade.

Greetings mowers and lawn mower owners of this model and many more. Man needs a touch of oil, but machines need a bit of oil. Timely care and maintenance extends the life of any machine. So friends, enough smart remarks, I’ll get to the point)).

First things first: LUBRICATION OF THE REDUCER.how often it needs to be done, it’s understandable. Everyone uses the mower differently.

My climate is hot, so you know what I mean, the video below was filmed in the evening in the cold at 38 C, so do not be lazy and look at the gearbox every 20-30 mowed seedlings.

You can use the ring spanner or the star spanner. I use a regular spanner, it’s available in common spanners while the mower is new and splines are good)).

As they didn’t tell you in the store, you should see the grease and not the gears.

So far so good, I’m adding grease.

Here friends I will make a small stop. Although I’m a do-it-yourselfer who is interested in something to make, break and do and even have some sort of technical education, but here’s a place where it is better not to get involved and not to get clever. well, unless of course you’re not an engineer who knows more than the designers of these mowers. Guys, you do not need to reinvent the wheel, it already works. Seen more than one roller where these masters are advised to shove and stuff in there grease, which is not for this purpose, and it leaks from the heat of a couple of hours of work.

It’s already done before us-everything for a man.

We put the tube on the reducer-we squeeze a little, the excess goes where we need it-don’t worry.

Unscrew the tube-twist the screw, everything is ready.

Now, let’s move on to the winding of the line on the spool.

On this model, it pleased with its simplicity and convenience, unlike older models. So far the mower hasn’t traveled much, 50-60 mows. everything runs like clockwork, and the capacity of the coil even up to 8 meters. can not fail to please the worker of this machine).

I mostly use a line with a thickness of 2.7 mm-this can be wound up to 6 meters, on average, I do not overload the coil-coil approx. 5 meters.

I was pleased that here you can do it without removing the spool from the mower-how clever is the brain that came up with it-who mows more than 10 acres at a time, you’ll understand what I mean.

Put the mower with the spool up- align these marks and the slit.

Press the black bobbin and put the line in, bring it to the middle and start winding. There are arrows and blanks. you don’t have to think of anything.

Here guys, ask the seller how and with what details to put your knife. I will show you an example of what was in the kit-two sided (more info in the video).

Stavmy knife-fixate pad that it would not rotate.

That’s all, folks, that’s about it for today. Do not hesitate to ask for important information from your supplier, and of course safety equipment is not canceled yet.

Watch the video, there are more details. With you as always Roman the Handsome DIYer.

See also  Which Screwdriver Is Better Devolt Or Makita

STIHL Fs 38 Lawnmower. How to refill the line

STIHL makes all sorts of cutting tools with both gasoline and electric engines: chainsaws and chainsaws for special purposes, brushcutters, electronic grasscutters, brush cutters, lawn mowers, and of course drilling tools, power washers, sprayers and other equipment. The company was founded in Germany and is now represented in 160 countries.

STIHL lawn mowers come in all capacities and styles. from the lightweight trimmer for trimming grass to the large, solid professional tool. Here are some favorite models of STIHL chain saws.

The lightweight STIHL fs 38 lawnmower is a portable trimmer for lawn care and mowing small areas.

  • power. 0,9 l. с.,
  • engine capacity. 27,2.7 cube. see,
  • two-stroke engine,
  • mass. 4,1 kg,
  • tank size. 0,33 l,
  • working part. head AutoCut C5-2,
  • mowing width. 255 mm,
  • easy-start system,
  • primer.

Curved boom, also has a D-shaped handle that is simply adjusted and set in a sensible position. Goggles included.

the STIHL fs 55 lawnmower is well suited for domestic tasks in the countryside: mowing grass around trees, trimming lawns, battling snowballs and weeds. It can mow old tough grass, nettles, rushes, thin bushes.

  • STIHL FS 55 power. 1 litre.с.
  • engine displacement. 27,4.5 cc. see,
  • two-stroke engine,
  • weight. 5 kg,
  • tank size. 0,33 l,
  • Working parts. knife, fishing line,
  • working width. 420 mm for the fishing line and 255 for the blade,
  • Primer to pump fuel into carburettor for a quick start after standstill.

How to correctly change the #cord (fishing line) on your trimmer \

Comes with shoulder strap for two shoulders, goggles to protect the eyes of the operator. The boom is straight, the handle is bicyclic and adjustable with a screw.

STIHL FS 130 is equipped with a STIHL 4-MIX 4-stroke 1,9 HP engine with a displacement of 36,3 cm, which of course fill up with petrol and oil, as well as two-stroke engines. This motor produces fewer emissions than a two-stroke and is quieter than a two-stroke. The air filter with a long-life cardboard filter element is low-maintenance.

The weight of the machine is 5.9 kg, mowing is carried out by the line otherwise speaking with a knife. Width of cutting is 23 cm with a knife, 41 cm with a fishing line. The STIHL FS 130 mower has a straight boom and a bicycle handle that can be simply swivelled for storage and height adjustment by loosening the central screw. Comes with a double shoulder strap and goggles to protect the eyes.

STIHL fs 250 is a powerful professional lawn mower. for cutting dry and tough grass, large brushwood, brush and small trees.

  • power. 1,6 kW
  • engine capacity. 40,3.2 cube. see,
  • 2-stroke engine,
  • weight. 6,3 kg,
  • tank size. 0,64 l,
  • tool. a blade that cuts the grass to 255 mm, there is an option to install a head with 2.7 strings,
  • Elastostart system for easy starting,
  • A primer to charge the carburettor with fuel allows a quick start, even after long periods of standstill.

STIHL FS-38 common disease

Includes shoulder strap and goggles to protect the eyes, detachable bike handle that can be rotated parallel to the boom for storage, the boom is flat. Height adjustment of the handle is done without tools, just unscrew the screw. Our customer stays controls are next to each other. on the handlebar.

As the main advantage of gasoline mower STIHL FS 250 users say the higher power and its ability to mow virtually anything. The disadvantages are awkward hanging eye, high line consumption and strong vibration.

The STIHL FR 131 T cordless petrol grass mower is the power tool of choice for inaccessible areas and challenging terrain. A shoulder strap makes it easier to carry, especially over long distances, and makes your job a lot easier because the tool itself is quite heavy. 9.6 kg.

  • 4-stroke 4-MIX engine,
  • power. 1,4 kW
  • 36.3 cm3 motor volume,
  • fuel tank. 0.71 litres,
  • The cutting attachment is a metal blade with a 230 mm blade width,
  • of course primer,
  • ErgoStart easy start system,
  • cardboard filter,
  • Automatic decompression system,
  • anti-vibration system,
  • Radial handle allows you to mow in tight spaces and inaccessible areas.
  • The STIHL FR 131 T can be easily transported in its transport bag due to the removable mower bar.

STIHL also produces electronic and cordless grasshopper mowers, accessories and cutting tools, personal protective equipment.

Mowing machines are attractive because of their mobility. they are independent of the outlet, they can take on their own, even in places where there is no electricity, although this type also has its difficulties disadvantages. STIHL chain saws are easy to find the right model for many applications.

Operating features

Every STIHL lawnmower is rigorously designed for the intended purpose, taking engine power into account. The manufacturer categorically recommends that the grasshopper should not be retrofitted or improved in any way. Before you buy a STIHL mower it is important to accurately determine the mowing application.

It is absolutely inexpedient to buy a powerful trimmer for periodical mowing of grass on the lawn, light gasoline or electric mower models are enough for that.

When using the machine it is important to:

  • Observe work/rest time in 20 minute intervals.
  • Use high-quality gasoline not lower than АI-92.
  • Use original STIHL engine oil (50:1) for the fuel mix.
  • Do not run the engine until it has been filled to the max. load 2 or 3 times.
  • When storing the lawn mower for the winter or anticipated break in operation, be sure to drain the remaining gasoline from the fuel tank to avoid engine damage.
  • Check the fuel filter regularly. clean it or replace it with a new one. to ensure that it functions correctly.
  • To prevent serious malfunctions, the air filter must not become clogged.
  • Follow the safety precautions for the STIHL lawnmower.
See also  How to Dissolve a Board on Bars Handmade Circular

Careful attention to the operating manual is essential to the long service life and trouble-free operation of your STIHL brushcutter.

A reel with two working tendrils

In this type of reel, find the number of fishing line grooves lying on the inside of the reel:

Use 2-3 m of fishing line for both. In single-cable spools the line is pulled through the through hole, its ends (tendrils) are folded together and aligned, and then reeled in the opposite direction of rotation of the bobbin on the rod. inside the arrow usually indicates the correct winding direction. If there are locking grooves, the ends of the fishing line are threaded into them or held by fingers of free hand, threaded through the through hole of the outer half of the bobbin, the bobbin is locked and fastened to the rod of the trimmer product.

The difference of winding the fishing line in the double-channel spools is that initially a piece of line with a length of 2-5 m is folded in half (to determine the middle fold), and the loop of the fold is inserted into a special groove between the grooves. Both tendrils of the fishing line are wound each in its own groove, the fixation of the tendrils and the reel assembly is similar to the above version with one groove.

The first execution of this procedure, and perhaps seem long enough and laborious enough, but with time and experience, this problem will be solved more quickly and easily.

The video below will clearly show you how to tuck the line into the grass trimmer reel and wind it correctly. this operation is not anything complicated and with some patience is sure to succeed:

Pre-winding

First, for winding the line is required to remove the spool (bobbin, bobbin) from the trimmer for grass. certain actions will depend on the difficulty of configuration and type of the product itself:

  • Small electronic grass trimmers with a working arrangement of the motor and spool in the lower part, usually have side buttons on both sides of the bobbin. When you simultaneously press them, the higher part of the bobbin along with the internal content for winding the line is disconnected, while the lower part remains on the trimmer. Disassembling the bobbin is better to create on a smooth even place, so that the spring included in the design is not popped out and lost;
  • electronic and petrol grass trimmers with a curved shaft without the ability to install a blade usually have a reel with a special wing nut: with similar designs, hold the bobbin in a stationary position with one hand and turn the wing nut securing the bobbin on the shaft counterclockwise with the other. How to tuck the line into the grass trimmer reel? How to tuck lines into a grass trimmer reel. It is clear how to charge the line on the grass trimmer. After unscrewing the nut the whole reel is removed.
  • electronic and gasoline grass trimmers with the ability to install a knife on a straight shaft (for example, trimmers for grass STIHL) under the bobbin has a hole. For the immobility of the rod in this hole is inserted screwdriver or other suitable object and a slow spinning achieved a mutual placement when the screwdriver goes inside the hole, and the bobbin is fixed. After which the body of the spool is scrolled clockwise (with left-hand thread) and removed from the grass trimmer.

For the second and third version of the spool, depending on the design, disassembled by different methods. Reels with winglets unscrew the winglet, and reels with snap fasteners press the snap fasteners and one part of the reel is released from the other part. How to tuck a fishing line into a STIHL model. 2. On your lawn. If the halves of the bobbin are connected by thread, it is enough to turn them by hand in opposite directions until they are completely unscrewed.

STIHL Organic Lawn Trimmer. How to refill the line. Changing the line on a trimmer (lawnmower)

When spring arrives, people often spend their free time in the countryside. They try with the onset of warm days to rid their plot of such a problem as weeds and grass. It is difficult to do this manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique it is possible to mow grass and remove weeds. it is a suitable device for mowing unwanted plants near the fence, at home, between the rows in the garden in the flower bed, etc. On how to choose a lawn mower that is suitable for your needs, read here. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. a spool. But over time, the fishing line wears out and it becomes necessary to replace it. The article will talk about how to tuck the line into the lawnmower.