blank

A wet candle trimer for Huter grass does not start. Diagnosis of the candle channel

trimmer for grass gasoline sharply stalled and does not start In order to most accurately determine the cause of the trimmer malfunction for grass of any brand (for example, echo) and find out the possibility of eliminating it, you need to install, when performing what action the device stalls. The engine can turn off both at idle and at high […]

Read more
blank

What is the gap on the candle of the gas trimmer. What will happen if you reduce the gap in the spark plug?

What gap should be between the electrodes of the candle? The normal gap of the spark plug depends on the structural features of the engine: for “classic” carburetor cars-0.5-0.6 mm; for carburetor machines with an electronic ignition of 0.7-0.8 mm; for injector.1. 1.3 mm. If the candles fail, then they need to be replaced with new ones, having previously cleansed […]

Read more
blank

What candle is suitable for a trimmer.

What a spark plug for benzokos Lifan X60 or Lifan Solano Silence candles are not hard to buy now. The main thing is to choose them correctly. The main feature of this process should be called nothing else, like the advice of the manufacturer. Specifically, the manufacturer usually advises a certain type of spark plug for a motor, which, according […]

Read more
blank

What candle the color of the trimmer should. How the ignition coil dies?

What candle is suitable for a trimmer The fuel consumption for gasoline trimmers is depending on: Therefore, fuel consumption is individual for each motor, also changes in different situations. This parameter is determined in different units, which are more popular from which: Manufacturers do not always indicate the real fuel consumption by one or another trimmer, because the owner of […]

Read more
blank

Fills a candle on a STIHL 180 chainsaw

Role of the spark plug A spark plug in a STIHL chain engine or any engine is a simple device. Each time the flywheel of the motor completes a revolution, a magnet attached to it induces an electric current in the static magnet. This current generates a spark across the electrodes of the plug. The spark ignites the fuel / […]

Read more
blank

Fills a candle on a Husqvarna chainsaw

Stalls immediately after launch: The fuel mixture is not prepared correctly, there is too much oil in it, so the octane number of gasoline is less than it should be, so the chainsaw only works on suction or immediately stalls. Spark plug carbon deposits or improper spark plug-to-wire gap. Shoots at the muffler: Enriched air-fuel mixture. Why does the chainsaw […]

Read more
1 2 3