Fills a candle on a Husqvarna chainsaw

Stalls immediately after launch: The fuel mixture is not prepared correctly, there is too much oil in it, so the octane number of gasoline is less than it should be, so the chainsaw only works on suction or immediately stalls. Spark plug carbon deposits or improper spark plug-to-wire gap. Shoots at the muffler: Enriched air-fuel mixture. Why does the chainsaw […]

Read more

Chainsaw chain lubrication

3 reasons why you shouldn’t use a drill to lubricate your chainsaw chain Many owners of chainsaws believe that any liquid is suitable for lubricating rubbing surfaces and it is not at all necessary to use expensive means. Therefore, every second person uses waste oil for lubrication. Of course, you can lubricate the chain and working off, but the consequences […]

Read more

How to sharpen a chainsaw at home

Sharpening with a file The first thing you need to sharpen the chain, or tweak it a little, are special files. How to sharpen a chainsaw chain with your own hands The use of a chain that is not sharpened can lead to overheating of the engine and the formation of scoring on the cylinder. We will analyze the main […]

Read more

How to mix gasoline for a chainsaw

Technology Not only the quality and proportion of fuels and lubricants is important (although it is dominant in this matter), but where and how (how) gasoline is diluted with oil for chainsaws. The technology provides for the use of containers with graduated divisions, some brands (along with chainsaws and oil) produce containers for mixing and storing fuel. Made of special […]

Read more

Where can I sharpen a chainsaw chain

Using special machines for sharpening So, first we will consider the first way, how to sharpen a chainsaw chain on different machines. They are automatic (electric) and manual. These devices must be used when the chainsaw chain is already heavily running and requires a thorough restoration. After all, ordinary files can no longer cope here. Chainsaw chain sharpening with an […]

Read more

The chainsaw does not start well and stalls

Chainsaw starts and stalls reasons Why does a chainsaw stall under load In some cases, the chainsaw under load is unable to work normally and simply stalls. A common reason for this behavior is improper carburetor adjustment, or air leaks through the crankshaft oil seals or carburetor gasket. And also this behavior can occur due to leaks in the carburetor. […]

Read more

How to remove a sprocket from a Husqvarna 136 chainsaw

The leading sprocket of the chainsaw. Correct selection and replacement The chain transmission of a chainsaw of any design determines the performance of the tool. over, during operation, the chain stretches, and the teeth of the drive sprocket wear out. An illiterate sprocket selection will dramatically reduce the durability of the chainsaw teeth, and its incorrect adjustment will lead to […]

Read more

Chainsaw grips but won’t start

After winter, I can not start the chainsaw, what can you tell me If the chainsaw is not used in winter or summer, then with the onset of spring, when it becomes necessary to harvest firewood, a malfunction is often observed in the form of the impossibility of starting the engine of the tool. The reasons may be different, but […]

Read more
1 2 3 41