Reviews of popular garden equipment ~ lawnmowers, trimmers, brushcutters, brushcutters ~ on ARKHENO.COM Tips and solutions to possible problems in operation
Gas Farmall runs on diesel How to start a single tractor correctly: why it stalls at a load, does not start, without a starter, the reason for working with interruptions When using the new walk.behind tractor, it is important to first study the instructions and pay special attention to the question of how to start a single tractor. The launch […]
Read more
Threading the Line into the Grass Trimmer The main question is how to properly wind the line on the spool of the grass trimmer, securely fixing it there? In the case of a device with one antenna, up to four meters of fishing line are unwound, inserted into the hole inside it, which fixes the fishing line, one end of […]
Read more
Silencer as the cause of the saw stalling under load Here’s another reason why the chainsaw stalls when you press the gas. the muffler. It is this part that can interfere with the full operation of the tool in cases where it is contaminated directly with exhaust resinous deposits. To do this, you just need to clean it. There is […]
Read more
How to replace line in any trimmer Technological progress provides us with a lot of opportunities to get rid of manual labor. This includes, among other things, mowing grass, which required a lot of physical energy when using a conventional scythe. In modern conditions, this process is much easier, because the applied technique minimizes all costs. Devices such as electric […]
Read more
Car engine starting mechanism The mechanism for starting a car engine is a system that requires special attention and is directly responsible for starting the engine itself. Modern cars are mainly equipped with a starter engine starting system. The starting mechanism is directly related to electrical equipment. The mechanism is powered by direct current from the car battery. The trigger […]
Read more
Checking the main systems of the chainsaw If the chainsaw refuses to work properly, you must make sure that all the conditions required for its normal operation are provided: Then it is necessary to sequentially check the functioning of all its elements. First you need to check the fuel tank. If the cause is not volume and quality of fuel, […]
Read more
The chainsaw stalls under load cause. Why does a chainsaw stall when heated It often happens that the chainsaw starts up cold, but stalls during the heating process. This behavior of the tool can be caused by the following reasons: The carburetor is incorrectly set. This problem can be identified by how the device is started up on a cold […]
Read more
A little advice. Try not to let the line come into contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then every time you have to stop work, remove the reel and release the line again. Trimming the line into the trimmer. I want […]
Read more
How to repair a punch if it stops working We find out the reasons why the perforator does not work; we consider different situations, the essence of breakdowns and how to eliminate them with our own hands. Why does the tool heat up, a smell appears, slips, hammers, but does not drill. Many other questions can be solved on their […]
Read more
Conversion of a screwdriver from battery to mains supply If your cordless screwdriver is out of order, it is not necessary to look for a new battery for it. You just need to convert it to network! Step by step instructions in our material. Battery Disadvantages Needs regular recharging. Sooner or later, batteries will use up their cycle life. The […]
Read more