That it is better to drink an electric or circular saw. Saber tool

tips for choosing a circular saw of a drive type for a house and a summer house, installations in the table and home workshop

All saw devices in which a round disk is called circular saws (circular) as a cutting element. In the industry and everyday life, hundreds of different designs of such saws are used, from powerful one- or multi-pound machines for sawing logs, to manual, replacing ordinary hacksaw. Other names of such equipment are a sawing machine, a manual circular. But machines with another cutting element. a ribbon, flat canvas, are never called a circular. Circular saw is always a round cutting disk. Manual circular, also called disk saws.

The basic principle of the operation of circulars is extremely simple. The engine rotates the shaft on which the disk with cutting teeth is fixed. The disk rotates, the teeth saw the material.

The device of the circular disco saw of a classic manual type with a wood cutting disk.

But the device as a whole, the bed, the supply system, the ability to adjust the speed of rotation, the angles of inclination, the engine power, the diameter of the cutting disk on different circulars differ very significantly. From the simplest devices (table, engine, shaft, belt, disk) to modern and complex, allowing to saw wood of different sizes and lengths, at different angles, different geometry.

Hand circular (disk saws) give the owner great opportunities in woodworking. With their help, both professional and domestic, amateur tasks in the construction, manufacture and repair of furniture and any wood products, and the harvesting of firewood are solved. Such a tool replaces manual hacksaw, two.handed and beam saw, jigsaw. Sometimes, the disc saw is more convenient to use instead of a chainsaw.

Classic disk, manual type, for wood work

Manual circular circus with a traditional layout (design), which was developed for the very first devices of this type, are considered classic. Namely. the electric motor is located perpendicular, at right angles to the cutting disk (cut axis).

Disc rotation speed on different models from 3,000 to 6000 rpm. This is always higher than the speed of the engine rotation, due to gear ratios that increases the speed of the gearbox. Different models have a power of 0.8. 2.2 kW. The supporting platform adjustable in two planes (up-down and under the angle) makes it possible to set the desired cut depth and the angle of inclination.

Almost all of the saw includes an emphasis of two rods and a support site. Having fixed it in the device case, you can cut any blank in a straight line with one even side (rubbish, beam). The support site when sawing is pressed to the flat side, as a result, a flat drink is obtained.

This is the main functionality of the classic saw. Additional on some models include the presence of a system of smooth start, adjustment of revolutions, etc.D.

The mini disk saw outwardly and constructively does not differ from the usual “monkey” (corner grinder. an angle grinding machine). The difference in the cutting element. Instead of disks for metal, concrete, a metal disk is installed on it.

Also, as on a classic manual disk saw, there is an adjustable support site, a necessary or complete depth of cut, a cut angle is set.

Mini saw is more compact, convenient to work in hard.to.reach places. It is more convenient for her to saw, for example, the ends of the blanks nailed at the height of the workpiece, and work on a workbench with small details. Working with one hand is allowed.

The power of such saws is small due to the fact that with an increase in engine power, weight grows proportionally. And the heavy “monkey” with power, for example, 2.2 kW loses all its advantages in compactness, lightness and convenience. It’s much more difficult to cut a tree with such an aggregate than a classic saw of the same power.

Council of a disk mini saw for sawing a small cross.section. a convenient and productive option.

Submersible

In its design, this is a regular, classic manual circular. The difference is that before the start of work, the disk is completely hidden in the protective casing. Drinking begins with the installation of a saw to the place of cut at any place of the workpiece.

After starting, a rotating disk crashes (plunges) into wood. Its peculiarity. the possibility of starting to drink not from the beginning of the workpiece, but from anywhere. This is important when sample internal grooves that do not reach the ends of the workpiece. The tool is convenient for sample of large recesses. For the accuracy of the marking, the supporting platform (tire) has a special design and a measurement system.

Hypoid

A manual saw of this type repeats the design and functionality of the classic version of the circular. The difference is in the layout. The engine is located not across (perpendicular), like classic models, but along, like an angular grinder (“monkeys”). For this, a hypo.eating gear in the gearbox is used, which gave the name to such power tools.

Council hypoid options are more convenient in work, better balanced. Their saw disc is shifted in the left side from the center, closer to the operator, if he holds the pen with his right hand.

The main characteristics that cost first of all

The most common models on the market have engine power from 0.8 to 2.2 kW and revolutions 4.5-5.5 thousand per minute, weight varies from 3 to 7 kg. When choosing these 3 parameters are the most important, they need to pay attention to them first.

Power

The higher the power, the better. But it should be remembered that the greater the power, the higher the cost, weight and consumption of electricity. Therefore, most often users dwell on medium.power options, from 1.0 to 1.6 kW. The exception is cases when the tool is bought to solve not entirely standard, “average” problems. for sawing only thin or thick material. In the first case, the lowest option is enough, in the second, on the contrary.

The council for the performance of the cut stated by the manufacturer of the depth (for example, 5.5 cm) the power of the installed engine should be grabbed by definition. But a more powerful option drinks faster, with less effort and load, which increases performance and increases the life of the tool.

Disk rotation frequency

The higher the speed of rotation of the disk, the more accurately and cleaner it drank. However, according to the laws of physics, “increase in speed, reduces strength”. Therefore, with the same engine power, a more “fast” disk rotates with less force.

The scatter of the most popular models and manufacturers is small, from 4.5 to 5.5 thousand rpm, so there is no particularly noticeable difference in work. Nevertheless, experienced experts notice the difference in the speed of rotation of the disk.

Council for thin, clean carpentry work is preferable to higher rotation speed. For construction work is better suited, with greater strength.

The depth of the cut

The indicator directly depends on the distance to which the saw disk comes out of the bed (support platform) at right angles. With inclined sawing, the depth decreases. For example, with a tool with a depth of 54 mm depth, you can saw a beam with a cross section of 100 mm if you do a drink on both sides of the beam.

Changing the angle of inclination

Almost all disk saws of this type are equipped with this function (from 90 to 45 degrees). When choosing, you should pay attention to the quality of the execution of the node. The screw clamps should be quite reliable, better metal (plastic clamps on budget models are often broken off). The turn of the rotation of the rotation at the angle should be made of a sufficiently durable metal so as not to bend.

Saw disk

In practice, each manufacturer produces saws for discs of its size. It is not always possible to choose a suitable disk from a saw of the same power of another brand. Coincidences are, but not always.

The differences in the planting and external diameters of only a few mm lead to the fact that the “alien” disk is not suitable.

Council when choosing discs should avoid teeth with an intricate, figure or complex shape. Such discs do not sharpen, or sharpen on expensive and rare special equipment.

As a result, instead of sharpening and further use, they have to be thrown out and buying new. Whereas the teeth of the standard shape can be undermined, several times increasing the service life.

There are a lot of information on the saw disk, the numbers have the most important. one. Manufacturing firm. 2. Model and type of disk. 3. Dimensions. four. Type of tool used. 5. Type of sawn material. 6. Disk size. 7. The number of teeth. eight. Landing diameter. 9. Maximum turns. ten. Direction of rotation.

Another check of construction community ⁠ ⁠

I love Saturday morning lasting flea markets. The construction store Restore continues most of all, which I have already shown many times. I have two of them, about the same distance from the house. In one more furniture and other large.sized goods such as refrigerators and kitchen slabs, and in the other, there are often different interesting tools and construction materials. Although, of course, one time does not have to. This is the whole buzz. You never know what you get.

For example, a brutal metal desk. It is strange that we did not let them out on some kind of

The vintage slab that I showed a couple of months ago is worth it:

In the tool section often comes across something interesting. Although there are a lot of slag, such as dick Chinese instruments, according to which the garbage dump is crying for a long time.

I was immediately interested in plumbing tools (in the photo I already put them in a wooden box in the foreground), which I noticed a couple of a week ago. Looks like some kind of local plumber died. Grabbed in sixty dollars.

In general, I have an automatic Rothenberger machine for cutting thread and just Ridgid’s manual circuits, but I have long been looking for a tool for cutting non.standard carving, which was used in the early 20th century only in the vicinity of Boston. There was just hope, which, however, did not materialize. But still, I love old tools. Yes, and ridgid pipe cutters are not superfluous. Especially allumine, the one on the left.

I also bought a lamp in a suitable style of style, although this is a modern reproduction.

Answer to the post “About Hilti (power tools for construction)” ⁠ ⁠

2016, I decided to rely and buy a 125 mm Hilti Coal grinder for 17 tyrov (alas, alas, I don’t remember). In addition to Makita 9565 CV.

Looked in the same “2 years without problems”. For six months he ducked it with metalworking. I’m calling the service, then something like this is a dialogue:

Me: Hello, I bought your tool, broke. I want to repair!

Me: half a year ago! Extra.time questions. Grinded steel!

T: And your guarantee is over, such things!

Me: But how? You have the first two years without payment!

T: Look carefully PDF with the list on our website, everything is carefully described there, everything is good, good mood, etc!

I climb onto the site, having previously carefully examined the box with a corner grinding and finding a small star at the agromed deuce. I am set to look for the desired document on the site. Voila! I see the point I need, where it is written that a guarantee for six months on an angular grinder of such a plan.

I call back to the namesake and get a brilliant answer to my “why?”. “Because this tool is often used”.

I solved my problem by handing over a corner grinder in SC Bosch/Makita/Interskol. Problem. The anchor burned (anchor, stsuko!) solution. put from Bosch, came up perfectly. But the master also said that the ventilation ducts were designed badly, which caused the dying.

Result. Hilti company, for me personally, a rare shit. My choice. Makita, if we need simplicity in buying parts, a corner grinder has been living since 2015. Jigsaw, disk saw (battery), shurik, saber. Bosch with an honest and unconscious guarantee of 2 years (after the purchase you need to register on the site). He also took a corner grinder with Metabo revolutions. But the wheel of adjustment.

So it goes. I recommend that the author try to solve the problem with Bosch spare parts, or better. Buy a normal tool and not get fucked with expensive unreliable shit)

Characteristics:

Saw sawing materials to a depth of 63 millimeters. She has a powerful 1600 watts engine. Standard diameter disks of 19 centimeters. You can adjust the cut angle. There are locks from random inclusion and spindle. a tool shaft to quickly change the disk. The supporting platform was made from aluminum alloy. You can put a lining on it to work with a tire.

There is a pipe for connecting a vacuum cleaner. There are two handles on the disk saw. The angle of inclination is adjustable from 0 to 45 degrees. For this, comfortable levers are provided in the design. The buyers write that the device will be ideal will help replace the native disk. They say it is not bad, but others are completely revealed with the most acute analogues.

Characteristics:

The technique of a German manufacturer is always a little more expensive than competitors in his segment. But there are enough buyers. they pay for quality. She has relatively low weight, and the power and number of revolutions are comparable to a large tool. The depth drank in our ranking of the best disc saws 2022 record. 70 millimeters. But we draw attention to the fact that it is at an angle of 90 degrees. At 45 degrees, the depth decreases to 5 centimeters.

A fan is built into the housing, which blow off the chips, but if it is not enough, then there is the opportunity to connect a vacuum cleaner. The handle is rubbed pleasant to the touch with a coating. There is a parallel emphasis in the kit. The spindle is blocked for independent fast disk replacement. If you put a circular for metal, then some aluminum sheet will also not notice, like a board. Buyers note that this model, unlike competitors, does not publish unnecessary noise. they are buzzing the engine and disk, nothing more.

Popular questions and answers

Yuri Dudin, senior seller of household appliances and tools.

What parameters should you pay attention to first?

In addition to the main parameters, check the model for the availability of protection against overheating. This will allow the use of the saw longer without damage to the tool.

Find out if shock.absorbing pads are provided that help reduce unpleasant sensations from vibration during the work of the electric saw.

Depending on the type of electric saw, other important features may appear. For example, it is worth making sure that it will be convenient for you to adjust the power of the chain tension in the chain saw.

It is excellent if the oil tank container is larger, so that you have to fill it less often during the operation of the tool.

Does the powerproof power affect performance on performance?

Speaking in simple language, without numbers and complex calculations, then the difference between the performance of the saw and how much electricity it consumes, exists and is called energy efficiency.

When choosing a model with high energy efficiency, you get a powerful tool and in addition to save on electricity accounts. Electric saws consume approximately the same amount of electricity. 1, 3.1.5 kW. At the same time, the power is different for everyone, the indicator ranges from 1000 to 3000 W.

What are the pros and cons of chain electric saws?

The pluses include the fact that the electrical chain type does not emit exhaust gases, so it is suitable for work in the rooms. She does not vibrate so much, works quieter and weighs, most often, fewer competitors.

Of the minuses. that after rain or in a room with high humidity, this tool will not work. Also, if the model is not equipped with overheating protection, you yourself will have to monitor the operation of the engine and give the unit for the respite.

Basic safety regulations when working with electric saw

The first and one of the most important points that you need to follow during work is a cable. It is not worth advancing on it, it is forbidden to work in a license and, of course, it should not fall under the chain.

Do not lose sight of the chain, protect it from heating, pinching, rupture. If there is no automatic lubrication system, process the chain in a timely manner.

Learn the instructions carefully before the start of work to know how the brake works.

Take care of clothes and protection for the eyes, head, limbs.

Eliminate the contact of a working tool with water and wet materials. Do not work after rain in the open air and in rooms with high humidity.

Clean, lubricate and store the tool correctly, in accordance with the instructions.

Chainsaw or electric saw: which is better?

When buying a saw for domestic needs, many people think: what to opt for. on a chainsaw or power tool? Both and other saws have both advantages and disadvantages.

Comparison of gasoline and electric saws:

• power. benzo tool is more powerful;
• Mobility. electrical equipment works from the network, so it is usually “tied” to the power source (outlet);
• the presence of wires. a saw that works from the network, unlike a chainsaw, has a cord, which often interferes during operation;
• noise level. power tools less noisy;
• Weight and dimensions. electric saws are usually easier and more compact;
• Service of a saw. a gasoline engine needs regular maintenance;
• Economicity. the cost of electricity consumed below the cost of gasoline, so the electrical saw is more profitable;
• the ability to use in a closed room-a gas tools cannot be used indoors due to harmful exhausts.

Note: One of the main disadvantages of electric saws is a binding to a power source. However, with the advent of battery saws, this ceased to be a problem.

What is different from the circular saw

The main difference between submersible circulation saw and a conventional disk is the location of the cutting disk. In the latter it is covered with a casing on top, while the lower part of the disk remains open. In submersible saws in a non.working position, the saw disk is placed above the support sole and the entire casing is closed.

Their difference is also the position of the disk relative to the sole: in submersible circulation models, it is displaced to the edge, and in ordinary discs it is placed almost in the center.

Another difference in principle of work. Simple disk saws begin to saw blanks from the edge, and submersible models can do saw from anywhere. To do this, you just need to set the desired depth of the disk immersion, unlock the “head” and place the power tool at the required point.

In addition, submersible models are equipped with a bus, thanks to which it is possible to make exactly the edges on long boards, which cannot be performed by a simple circular.

On a note! The disk of submersible saw in non.working state is placed in the casing and does not leave the support sole, so the power tool can be installed on any section of the workpiece processed.

• Network. Feed from the network 220 V. The lack of such a power is the need to have a power grid at the place of work, as well as a certain inconvenience of operation of the tool due to the cable.
• Battery. Work at the expense of the battery, so the radius of their work is unlimited. Also required a power supply network of 220 V, but to charge the battery. Depending on the capacity of the power source, they can work on one charge no more than 50 minutes.

It is advisable to buy batteries in the case when it is impossible to use a network saw in the work.

How to choose the right and what characteristics to pay attention

In the process of buying submersible circulation saw, it is necessary to pay special attention to the following characteristics:

• The power of the electric motor. The saw depth and the speed of rotation of the working element depends on this indicator. And you need to consider the following: the more powerful the power tool, the harder it is.
• The convenience of the tool. Submissive circulation saw should be very convenient, since often you have to work for a long time to work for a long time. Milking for checking the convenience of a submersible saw, it is necessary to hold it in the hands, and then make several cuts with its help.
• Number of revolutions per minute and the possibility of adjusting them. The faster the disk rotates, the easier it is to work with the saw:
• hard wood is easier to saw;
• The fishing line for the trimmer cut is cleaner;
• A rapidly rotating disk is less likely to jam.

Attention! All these characteristics must be taken into account during the purchase of a submersible saw to buy a model of the desired power and functionality.

Characteristics

The main task of this type of tool is the cut of wood and materials of wood processing. To do this, hand.shaped electric saws are used, the design of which is the electric motor, gearbox, working body and safety device.

Electric saws can be universal purpose, and highly specialized. This, first of all, depends on the power of the electric engine and the design of the working body. Hand chain saws are considered the main universal tool for carpentry, harvesting firewood, and garden care work. To work with lumber in the form of boards or wood boards, disk and saber saws and electrolobsics are used. For small carpentry, saber saws and electrolobsik are usually used.

An important point in the selection of electric saws is the possibility of setting it up for specific types of tasks and the possibility of changing the working body. For specific work, for example, in order to process a non.cut board, special types of disk saws are used that can make a quick and even longitudinal cut. Depending on what thickness the board has and the adjustment of the electric saw is made, the cut depth is installed in the circular saw, and in the saber‘s canvas for the transverse, longitudinal or thin, groove cut.

It is generally accepted that saws with a more powerful engine. more than 2 kW are professional, and the tool that has less than 2 kW has a power to the category of household.

Principle of operation

Common for all types of manual electric saws on wood is the principle of wood processing. cuts using metal cutting teeth. This principle is applied in manual and gasoline saws. The difference is how the working organs of electric saws are arranged, how the teeth are fixed and what form they have.

The working bodies of electric saw. teeth of disk saws, hacksaw paintings or saber saws most often have a wedge.shaped or trapezoidal shape, can be flat or complex, have one or more cutting edges.

Modern technologies for the manufacture of electric saws allow you to use special alloys and high.carbon brands of steel for the production of saws, which make it possible to increase the resource of the tool and increase its productivity.

By their design, the working bodies can be:

• With a disk working body;
• In the form of a saw blade one or bilateral;
• In the form of a saw chain installed on a special bus.

Disk saws usually have triangular, wedge.shaped and trapezoidal teeth of complex shape. On the working surface, sharpening of one or two cutting faces with wiring teeth is used. The principle of operation of this electric saw is the context of the wood fibers when the disk is rotated around its center. The teeth alternately bite into the wood, removing part of the fibers with the cutting edge of the tooth.

Sable saws use the reciprocating movement of the working body. Depending on the setting of the saw, the movement can be 3 cm and 5 mm. To work with a saber saw, saws are selected, which differ in their purpose and apply:

• To work with wood:
• for sawing plastic and wood.based plates;
• used to work with aluminum or thin sheet metal.

Chain saws are a closed flat circuit with teeth of a complex shape, it is set in motion of the gear of the chain drive from the saw engine. The saw chain moves endlessly along the guide tire. Cut is carried out by teeth located in the form of linings on a chain on the right and left side of the chain. For this type of power tool, the circuit is selected not depending on the direction of the saw sawing rod, but depending on its strength.

Wood electric drive used at home has several varieties. All of them differ in engine power and performance, size and principle of operation. But when selecting electric saws, it is recommended to talk about a specific type of tool with certain properties and having a certain design, this is the simplest and most understandable classification of the power tool. Today there are five main types of saws that are widely represented on the market and oriented for both professional and domestic use:

Circular

This is the most common type of household and professional power tools. These are universal saws. They are designed for longitudinal and transverse cutting of lumber, as well as for cutting sheet and slab materials from wood and plastic. The working organ of this saw is a disk saw made in the form of a steel saw disk with teeth of different shapes. The movement of the saw disk is carried out using an electric motor. He transfers rotational movement to the gearbox, and then through the gear to the shaft, on which the saw is planted.

The basis of the design of the electric saw is a bed, on which the case is attached with the engine and the gearbox. Most of the electric saw have a device that allows you to change the cut depth and the angle of inclination of the disk relative to the surface. The angle of inclination is adjustable from 0 to 45 degrees, and the cut depth depends on the diameter of the disk. The maximum depth of sawing is 85 mm, while the diameter of the disk itself is 200 mm. For these saws, discs are used:

• for longitudinal sawing with an acute tilt of teeth;
• for transverse cut with a classic triangular equilateral tooth;
• Universal discs with a trapezoidal tooth of complex shape.

To protect the saw, a protective casing is used with the opening device for protecting the saw disk and the electronic protection system to turn off the power in the case of the saw lock. Separate models of circular saws can be used as a machine, turning the sole up and fixing the body with special clamps.

Chain

Chain saws were originally intended for firing trees and cutting branches in the areas of the rolls with industrial forest harvesting. Today, the principle of an endless chain with saw teeth is perfectly implemented in electrical models of saw. The main working body of the electric saw is a chain that moves along the guide tire. It is stretched between the two stars: the host, which through the gearbox rotates from the electric motor and the driven, which is located on the opposite side of the tire.

Electric saws of this type differ in engine power and the length of the guide tire. The largest and most powerful electric saws have a tire length of 45 cm, there are slightly electric saws less than 35-40 cm, and there are also very small models-with a bus only 30 cm long. These mini saws are designed to work in the garden. They have a light weight, and they can be easily held with one hand, it is very convenient when pruning branches and branches on the trees.

Chain saw tool of increased danger, so it has several devices that ensure safety during operation. The most important of these devices is the mechanism for stopping the movement of the chain. It instantly stops the chain when blocking or impulse. The advantage of this type of electric saw is the possibility of cutting large logs, both in the transverse and in the longitudinal raza.

Pluses and cons of an electrician

The principle of operation of this popular tool is based on the reciprocating movements of the file, which is able to saw the workpiece not only in straight and at an angle, but also around the curly line. At the same time, the cut is very smooth, and the thickness of the processed part directly depends on the length of the canvas, which is selected for the material (wood, metal, etc.D.).

Among the main advantages of this device, professionals and amateurs especially note:

• compact dimensions and low weight;
• Convenient management, which can be handled with one hand;
• simplified replacement of the cutting canvas;
• the ability to start work with any place of the workpiece in the presence of a pre.drilled hole (to the size of the file);
• Figure sawing of materials.

There are also disadvantages of an electrician and almost all of them are associated with a cutting canvas, which quickly wears out (you have to often change), and with a significant overheating, uneven cut “betrays”. In addition, the settings of this power tool do not allow you to install the depth of the saw.

Pros and cons of a disc saw

This tool device saws materials using a disk with teeth. Manufacturers equip the “circular” with a powerful electric motor. Therefore, during work, this tool has to be controlled using both hands. At the same time, the operator has the opportunity to configure the depth of cut or use the disk saw in the role of a stationary machine.

• high performance;
• very even sawing materials in the longitudinal and transverse directions;
• resistance to overheating, because of which you have to interrupt the work and wait for the tool to cool;
• Disk service life (consumables change very rarely).

The disk saw also has its disadvantages. First of all, these are large sizes and decent weight, as well as a rather complicated replacement of the disk. In addition, this tool is not suitable for a figure cut and does not allow you to start work from the middle of the workpiece.

Differences in work and features

Electrolobzik saws the material due to the reciprocating movements of the file, which should be selected, respectively, the upcoming work. Some types of tools allow you to configure fluctuations forward and backward to achieve less overheating of the cutting canvas and get a more smooth cut. The jigsaw allows the cut to produce both vertically and at an angle, and the thickness of the material that can be cut depends directly on the length of the file.

The circular saw produces a cut using a disk with teeth. Hold this tool with two hands, unlike the previous. Most disk saw manufacturers provide for the ability to install the tool up the drive up, thereby turning it into a small machine. Cut can be carried out both perpendicular to the plane of the material, and at different angles. The cut depth is regulated by moving the position of the saw platform and usually does not exceed 85 millimeters.

Before buying one of these tools, it will not be superfluous to familiarize themselves with their most significant advantages and disadvantages.

The advantages of the jigsaw

• Small size and weight, which allows you to hold it with one hand
• Fast a saw replacement
• The ability to produce cuts from any section of the material, having previously drilled the hole
• The ability to cut out various figures

Flaws

• Overheating of the file leads to a significant deterioration in the quality of the cut and the appearance of a slight wavy cut
• It is impossible to establish the depth of the saw
• Quick wear of the files

The advantages of the circular saw

• Long service life of the disk
• Ideal when processing materials when you need to perform a long longitudinal or transverse section
• The ability to perform large volumes of work without the need to stop for cooling
• A significant increase in performance due to the possibility of installing a saw up a disc

Is it possible to replace one tool with another

Although these tools can in some cases replace each other without a noticeable difference as work and ease of use, nevertheless an electrician is a more universal device. The saw, on the contrary, can perform a much larger volume of monotonous work. Although in many indicators, the circular saw has long overtook even the most modern jigsaws, it is sometimes quite laborious to use it, and a frequent disk replacement when working with various materials will not add convenience. You can replace the file at the jigsaw in just a couple of minutes.

Having determined more accurately on which of the types of tools you need, you can start researching the market. You should not buy the cheapest option: such a tool will be significantly more noisy and, most likely, will heat up, which will adversely affect its service life. And vice versa, it is not necessary to buy a tool for your needs with a whole set of various bells and whistles and capabilities, most of which will definitely not come in handy in the household. The best option would be to opt for the instrument of the middle price category that will contain a set of the most necessary functions and will not hit the budget.