Tm 360 ss motoblock trailer assembly

Trailer for motor-block TM-360/2ss (Belarus MP-600) SUPER PRICE.

trailer, assembly

The company carries out return and exchange of this product in accordance with the requirements of the legislation.

Return periods

Returns are possible within 14 days after receipt (for goods of proper quality).

The return delivery of goods is subject to agreement.

According to the current legislation you can return the goods of proper quality or exchange them if:

  • the product has not been used and has no traces of use by the consumer: scratches, chips, scuffs, stains, etc. п.;
  • the goods are fully completed and the factory packaging is preserved;
  • All labels and factory markings are preserved;
  • the product retains its appearance and consumer properties.

TM 360

The design of this model is intended for transportation of construction materials and various loads, but it cannot be used on roads with heavy traffic.

The length of the whole device is 290 centimeters, width. 150 cm, height. 28 cm. The length of the body is 1.5 meters, width. 1.1 meters, and height. 27.5 centimeters.

The maximum weight of the trolley is 500 kilograms. The tilt angle of the cart is 30 degrees. With such a device, a single-axle tractor can accelerate up to 10 kilometers per hour at a total weight of 90 kilograms.

In this video, you will learn more about the cart for your power tiller:

Cart for motor-block TM-360

-Oka, MB-1D2-Oka, MB-2K-Neva, AGRO, Ural, Ural-3. etc.

The trailer can be operated at ambient temperatures of.30C 40C

Working speed, km/h, not more than 10

Overall dimensions, mm, not more (length, width, height) 290015001050

Body dimensions inside, mm, max (length, width, height) 15001120275

Body tilt angle, degree, not less. 30

Assembly of motor-block trailer TM 600, MP 600.

I bought a motor-block trailer MP 600, began to collect, I can not understand the brake system. Do you have the service of assembling motor-block trailer with site visit of our mechanics??

Yes, this service is available, you can make a request for a visit of a mechanic by phone. Maybe you can help with the step-by-step assembling instructions for the motor-block trailer MP 600.

The technological process of assembling the MT 600 motor-block trailer is simple and does not take much time. It’s important to keep the assembly in the right order.

Turn the trailer and assemble the hub, remember that hubs are different, they are not interchangeable.

Brake cable stop should point to the front of the trailer.

Install the trailer drawbar, it is secured in two places with pins.

Repair of the engine of the Chinese walk-behind tractor.

Install the brake band on the hubs of both wheels, securing it with two screws.

Insert the brake cable in one of the hubs.

Note how the plastic bushes and guard are positioned.

The spring must be able to push back the brake band.

Pass the brake cable through the block on the brake rod.

Tighten the cable and secure it with a clamp, finally adjust the brakes after installing the wheels.

It is more convenient to pull the brake rope with two people.

There is a groove for the o-ring on the outside of the wheel rim.

On the inside of the wheel rim there is a brake ram.

We install the wheel with the brake drum inside out, do it carefully so as not to damage the brake belt.

Fasten the wheels to the hub, put a washer, an engraver, a nut, clamp.

Turning the trailer, installing fenders. The fenders are attached in two places to the body frame.

Assembling and installing the backrest.

Fasten the seat with screws to the hinges on the body.

The power tiller is assembled and ready to use.

Motorcycle trailer can work in conjunction with different models of power tillers and power tillers.

A special thank you for our hard work, to see a satisfied customer.

Phone: 375(17) 512-37-12. Mobile Phones: 375296741674 (A1, Viber and WhatsApp); 375298767878 (MTS).