Tool for stripping of cross-linked polyethylene

481 Stripping tool for insulation and semiconductive screen on cables with cross-linked polyethylene insulation KSP-150 KVT

Free delivery, ex stock! On business days, call!

Delivery in Moscow and Moscow region:. Minimum order amount for delivery by courier: 3 000 USD per order within MKAD (Moscow outer ring road). 600 Free shipping from 50,000. within the MKAD. Delivery outside the Moscow Ring Road.

Delivery in Russia: At the rates of transport companies, delivery to a transport company. 600

Delivery in Moscow. up to 2 working days, within Moscow region. up to 3. information about shipping and payment.

• 2 in 1: stripping insulation and semiconductive screen on high-voltage cables with XLPE insulation ∅ 90150 mm
• Clean and neat removal of the semiconductive screen over the insulation
• Cable clamping by turning knob. 6 pressure rollers
• 2 spare knives in the kit
• 2 blades installed: tapered and straight
• Adjustable stripping depth
• Smooth depth of cut adjustment
• Packaging: rugged plastic case
• Weight: 3.40 Kg
• Tool length: 600 mm
• Packaging: hard plastic case
• Case dimensions: 650x255x75 mm

Your review: Attention: HTML is not supported! Use plain text.

Score: Poor.- 1 2 3 4 5 Good.- Enter the code shown in the picture:

With full information about the terms of delivery you can get by following this link.

Attention!Product images, including color, may differ from actual product appearance. The producers have the right to change the specifications, names, appearance and equipment of products without prior notice. Check with our managers before ordering.

The information on the products displayed on our web-site is not a public offer, which is defined by the provisions of Part 2, Article 437 of the Civil Code of the Russian Federation.

Choosing tools for cross-linked polyethylene

Cross-linked polyethylene is becoming increasingly popular due to its performance characteristics. In particular, it can be used for many communications. But despite the many advantages of this material, it is very difficult to make a quality installation without a reliable tool. But if it is there, then any, even novice, home craftsman will be able to carry out the installation of the pipeline with their own hands. To do this, you need to learn some of the nuances of using the material and equipment.

Why cross-linked polyethylene does not weld

Unlike polypropylene, which is easily welded with a soldering iron for welding polypropylene pipes in the home, welding polyethylene of any kind is not used in the home due to the high cost of equipment and impracticality.

Welding technology is used for joining industrial and large diameter pipes of low pressure polyethylene (LDPE), with two methods of welding polyethylene pipes: electrofusion welding with plastic electric welding sleeves or butt welding, butt welding under pressure after melting of the pipe ends with a specialized butt welding machine.

Electric welding sockets for welding HDPE have a high cost, in addition to their use requires an expensive device that provides the passage of electric current with the specified parameters. In the second, “cheaper” method, in addition to using a soldering disc with an electronic device that sets the temperature and time of its heating, the pipes are placed in a massive structure that allows you to connect their heated ends under pressure.

Post a video review. get ON-bonuses!

Now it is profitable to help other buyers to decide on the choice of goods! Tell us about the product you bought from us and get ON-bonuses for it!

Make video reviews for each product purchased in ONLINE TRADE online store.RU. Thanks to this other buyers can learn about the quality, advantages and possible disadvantages of the product they are going to buy. And you will get a well-deserved reward to your bonus account for your video reviews.

For more details on how to post product video reviews please see ON-Bonus for product video reviews

The tool for cross linked polyethylene

The nozzle is used to join pipes made of cross-linked polyethylene.

STABIL 20×2,9 ViEiR expanding nozzle

The nozzle is used to connect cross-linked polyethylene pipes.

STABIL 25×3 expansion nozzle.7 ViEiR

The nozzle is used for connecting cross-linked polyethylene pipes.

STABIL 32×4 expansion nozzle.7 ViEiR

The nozzle is used to connect cross-linked polyethylene pipes.

Extension nozzles 16×2,2 ViEiR

Expansion nozzles for work with the pipe PEX 16×2.2

Extension nozzle 20×2,8 ViEiR

Expansion nozzles for use with PEX 20×2.8 pipe

Extension nozzles 25×3,5 ViEiR

Expansion nozzles for PEX pipes 25×3.5

Extension nozzle 32×4,4 ViEiR

Expansion nozzles for work with pipe PEX 32×4,4

Universal manual press machine for fittings (12mm-20mm)

Complete set for work with axial fittings and pipes from cross-linked polyethylene.

Universal manual press (16-32mm) 4 nozzles

Kit for working with axial fittings and cross-linked polyethylene pipes.

Press tool with press jaws and expanding nozzles for REHAU (16-32)

Manual universal press machine (16-25mm) 5 nozzles

Press machine for work with axial fittings.

Press machine for REHAU joints (16mm-32mm)

Set for working with axial fittings and pipes made of cross-linked polyethylene.

Hydraulic press tool for REHAU fittings (16mm-32mm)

Accessory kit for axial fittings and cross linked pipes.

Today a stripper is used for efficient stripping process. It allows you to quickly and accurately separate the desired amount of insulation. Precise adjustment ensures no damage to the cores.

Stripper for stripping wires became widespread relatively recently. Even now, many electricians and hobbyists use a knife, sharp blade, wire cutters, and other tools to cut insulation. Can easily damage the cable when using them. This is especially true for thin wires, where the absence of each strand affects cross-sectional area and strength.

Cable stripper eliminates such problems. There are different types of the device, but in all cases the blade extends exactly to the thickness of the insulation layer. the mechanism gives the possibility to adjust it according to the cable cross section.

Tools for cutting and stripping electrical cables

The multifunctional high-voltage cable stripper set for stripping high-voltage cables with a diameter of 55-160 mm applies:

• for stripping the semiconductive outer extruded layer on the insulation,
• to remove the unseparated semiconductive layer,
• for stripping,
• for chamfering the insulation cut,
• To make a circular groove in the cable insulation.

ALROC ET-AMF5-220V. removable electric drive for tool AMF5/55-160 (220V)

220V detachable electric actuator for AMF5 series tools

ALROC BMFD/50-160. multifunctional quick release tool stop for tool AMF5/55-160, for cables with diameter of 50-160 mm

Stopper to limit tool travel on cable surface, for tool CAMF5/55-160

ALROC K7/CH20-45-NS. beveling blade cassette for tool AMF5-BBCF

Cassette with LCH tool blade for AMF5-BBCF, used for beveling cable insulation

ALROC K7/FSC. cassette with blade for removal of not separated semiconducting layer for tools AMF4 and AMF5 series

Wire strip cassette for the AMF4 and AMF5 tool series, for stripping the unseparated semiconductive layer

ALROC K7/INS. Wire strip cassette for tool AMF5/55-160-BBCF

LINS toolkit cassette with blade for AMF5-BBCF, for stripping

ALROC K7/PNS. set including groove blade cassette and guide rollers for AMF5/55-160-BBCF

LPNS knife cassette for tool AMF5-BBCF, serves for making circular grooves on cable insulation

ALROC LPNS-10. 10 mm groove blade for tool AMF5/55-160-BBCF

Blade width 10 mm for straight groove for tool AMF5/55-160-BBCF

ALROC CWB/18-60-FEP. tool for removal of semiconducting non-separable screen on insulation of medium voltage cables (working diameter 18-60 mm)

Tool for removing the semiconductive non-separable layer, creating a bevel at the cut end of medium voltage cables with a diameter of 18-60 mm

ALROC DPC/10-45. tool for sheathing of medium voltage cables and LV-ABCs in the middle point (working diameter 10-45 mm)

Tool for removing outer sheath on the length of cable mowing line or insulation on the length of overhead line, applicable to medium voltage cables 10-45 mm in diameter

ALROC MF1/25. tool for removal of unseparated semiconductive layer of medium voltage cables (working diameter 14-44 mm)

Multifunctional adjustable stripping tool for removal of semi-conductive unseparable layer in medium voltage cables (14-44 mm diameters)

ALROC MF1/60. tool for stripping of unsheathed semiconductive layer in medium voltage cables (working diameter of 18-60 mm)

Multifunctional adjustable tool for removal of semi-conductive non-separated layer on medium voltage cables with 18-60 mm diameter

ALROC MF2/60. Tool for removal of outer sheath and insulation of medium voltage cables (working diameter of 16-58 mm)

Tool for sheath and insulation stripping of XLPE and EPR cables of 16-58 mm diameter in medium voltage cables

ALROC MF3/60. tool for stripping of outer sheath, insulation (including EPR) and detachable semiconductive layer of medium voltage cables (working diameter 16-58 mm)

Multifunctional adjustable tool for sheath stripping, stripping semiconductive layer and insulation of medium voltage cables 16 to 58 mm in diameter

The choice of tools for installation of PEX pipes

Professionals recommend choosing tools based on individual needs. There is industrial equipment intended for everyday use. The main difference between such tools is the high cost, long service life and the availability of additional options.

The second type is a custom tool designed for home use. The advantage of these devices is considered a low cost. The disadvantages can include short-lived design and the lack of secondary options.

Pipe cutter or secateurs

Medium For home use, you can buy a secateurs for 250. 300. The main difference in the quality of the blade, the cheap model will make 200-300 cuts and will fail. Expensive pipe cutters are designed for several thousand cycles.

Calibrator

It is used for the preparation of the cut. It forms a rounded end and chamfers the inside edge of the cut.

Expander or expander

This device is necessary for flaring pipe ends. Professional models can be equipped with an additional electrical element to increase speed. The cost of the device ranges from 50,000 to 95,000 Household expander, will cost about 15000 20000 The key difference is the resource spacing mechanism. The springs get weaker with each use, and the tool reduces the degree of compression.

Some masters instead of using an expander advise to heat the joint with a household hair dryer. This is not recommended. Heated cross-linked polyethylene changes intermolecular bonds, it becomes unstable. This is why such joints often leak water.

Radial press for cross-linked polyethylene

Used for uniform compression of the sleeve, previously put on the socket with the pipe. The electric press is usually equipped with a rechargeable battery. The essence of all varieties is to lighten, speed up the process. The hydraulic press, for example, is the simplest professional equipment and is based on the principle of compression of the sleeve by a hydraulic drive, thus relieving the builder’s hands. The manual press works like a lever, multiplying the clamping force of the handles and making a pressure on the thermowell to be squeezed

Axial press

A highly complex device for uniformly pressing a sliding sleeve onto a pipe with a socket inserted. There are manual and hydraulic axial presses.

Press to dismantle a fitting

This device is intended to remove a pressed thermowell when dismantling a fittings connection. To remove a crimped thermowell, position the tool as shown in the illustration and gently squeeze the handles. It is not possible to reuse a removed thermowell.

NIR-SPE-02 set for XLPE cable dia. 40-150 mm

Tool set NIR-SPE-02 is designed for a cable installer, who performs installation works in the high and medium voltage networks, where cables with XLPE insulation are used. Tool kit NIR-SPE-02 allows performing any works on cutting the cable, stripping its sheath, insulation, removal of conductive layer, splicing and mounting of line and end muffs, cutting out the damaged part with the following splicing.

Industrial wire stripper, stripping heavy duty XLPE Cable. BWS-100v2

This set includes 16 basic tools such as a hacksaw, wire stripper, adjustable pliers, insulated side cutters, wire cutter, pliers, metal marker, file, and socket head.

The tool included in the set is certified (if necessary, the appropriate documentation is provided).

Ballpoint pen, passport, Notebook, tape measure 3 m, Head lamp, carrying case, Pliers 160 mm insulated to 1000 V, three-edged file 200 mm, Diagonal cutters 160 mm insulated to 1000 V, Pliers 250 mm insulated to 1000 V, Socket head 12 mm, Socket head 13 mm, Socket head 14 mm, Socket head 17 mm, file flat 200 mm, Metal saw with a spare cloth, Metal Marker, Extension 125 mm, Socket head 19 mm, Wrench ratchet, Socket head 22 mm, Pliers socket 160 mm insulated to 1000 V, Folding Meter, Tool for stripping insulation KSP-150 dia. 90-150 mm Tool for insulation remover KSP-90 dia. 35-85 mm Length 390 mm, Height 290 mm, Depth 150 mm, Weight, not more than 13,3 kg