What Can Be Sawed With A Jigsaw

Do not forget about safety

This is important, so it will not be superfluous to repeat the basic precautions.

  • Observe all normal electrical requirements.
  • Do not be lazy to maintain order at the workplace: do not keep unnecessary items close at hand, remove accumulated sawdust and scraps more often, take care of good lighting.
  • If you do not like pulling splinters out of your fingers and removing sawdust from your eyes, use personal protective equipment: gloves, goggles or a face shield.

How to cut thin and thick wood

The electric jigsaw was created for working with wood, and therefore it is not at all strange that most of the work is carried out with this material. over, you can cut with equal success:

  • Solid wood;
  • Lumber;
  • Pressed wood.

Different webs are used depending on the thickness of the material. over, they will differ not only in length, but in the frequency and size of the teeth. The thinner the material. the smaller and denser the teeth should be.

To obtain a clean cut on thick wood, use saws with progressive teeth, which are gradually reduced.

What Can Be Sawed With A Jigsaw

How to cut plastic

Soft artificial materials such as plastic, plexiglass, polystyrene are perfectly cut with an electric jigsaw. In terms of their properties, they are very close to wood, and therefore the same consumables are used for sawing. The only remark: they cut plastic at low speeds, since at a high speed of movement of the blade, the edges can melt.

How to cut metal with a jigsaw

An electric jigsaw can serve as an alternative to an angle grinder in cases where you need to work with profiles, pipes, sheet metal. It is this material that gives the highest load on tools and files. Be prepared to take breaks and change consumables frequently.

The maximum thickness of metal that household and semi-professional jigsaws can work with is 10 mm.

Before cutting metal with a jigsaw, you need to select special saw blades.

Dnipro-M T 118 A metal saw blade set are made of solid steel and are perfect for straight cuts. Use the pendulum function to reduce wear and prevent melting of the working part.

How to cut sheet materials straight

The main purpose of a jigsaw is to get an even cut. The easiest way to make it.

The first step is to make the markup, which will serve as a guide when working. If the edge of the workpiece is straight and you just need to make it smaller, use a rip fence. It is a T-shaped device that attaches to the sole of an electric jigsaw.

To reduce the wear of the file, the pendulum stroke is switched on. Move the jigsaw slowly, without jerking. Moving too fast or jerking will adversely affect the mowing line of the cut and require additional treatment (e.G. Sanding).

Straight cut

This is the simplest case. Mark the line with a pencil and smoothly guide the jigsaw along it. The built-in laser pointer will be more than helpful here. Sometimes a parallel stop can be useful for such work, which is fixed on the jigsaw frame.

The sawing speed can be maximum. Pumping will further increase cutting speed.

To maintain a straight line, you have to "steer" all the time with a jigsaw. But even the most careful "aiming" gives mediocre results. In this type of work, the jigsaw loses to a circular saw in terms of cut quality and speed.

What is a jigsaw for?

Most often, an electric jigsaw is used to make wood products. This tool has found wide application in the furniture industry, where elements and parts of various shapes are made with its help.

READ  Can Jigsaw Saw Tiles

If, when working with an electric jigsaw, you choose the right consumable and cutting mode, then you can:

  • Make straight and curved cuts;
  • Saw circles without damaging the sheet;
  • Cut thin metal;
  • To produce wood products up to 10 cm thick (the Dnipro-M LE-110R electric jigsaw model cuts 11 cm bars);
  • Cutting plastic;
  • Saw ceramic and porcelain tiles.

Whether a power tool will be able to work with this or that material will depend on the power and type of the tool (household, semi-professional, professional). Not all electric jigsaws have additional functions, such as an angled cut or the ability to connect additional elements and tools. To find the right tool, read the article "How to choose a jigsaw".

In this case, you also need to select the correct saw blades. The pitch of the teeth, their length, material are taken into account.

Getting started: how to turn on the jigsaw and start sawing

  • Working with an electric jigsaw begins with a visual inspection. The tool and power cable must not be visibly damaged.
  • Next, the saw blade is installed (always remove it before storing).
  • Before starting work with a jigsaw, adjustment is carried out. First of all, the frequency of movement of the file is selected suitable for the material. If you want to make an edge cut, you need to set the cutting angle. On the Dnipro-M electric jigsaws, this is easy thanks to the inclined sole. If the task allows, the pendulum stroke is switched on, and the amplitude of movement of the canvas is selected.
  • If necessary, install a parallel stop or compass to make holes in the workpiece.
  • If a lot of dust is generated during operation, connect a vacuum cleaner.

How to cut metal with a jigsaw

An electric jigsaw can serve as an alternative to an angle grinder in cases where you need to work with profiles, pipes, sheet metal. It is this material that gives the highest load on tools and files. Be prepared to take breaks and change consumables frequently.

The maximum thickness of metal that household and semi-professional jigsaws can work with is 10 mm.

Before cutting metal with a jigsaw, you need to select special saw blades.

Dnipro-M T 118 A metal saw blade set are made of solid steel and are perfect for straight cuts. Use the pendulum function to reduce wear and prevent melting of the working part.

We cut wood materials

Cutting wood and everything that is made from it is the main purpose of a jigsaw. Therefore, a wider range of saw blades is produced specifically for wood and is divided according to the type of work.

How to cut circles

Cutting a circle into a workpiece is one of the most difficult tasks for a beginner. But there is nothing incredible in it, since you can quickly learn how to work correctly with a jigsaw.

  • Disable the pendulum stroke.
  • Make the markup.
  • Drill a hole for the saw blade.
  • Install the compass and get to work.

You can make a compass with your own hands. To do this, you need a flat plate and a self-tapping screw. The jigsaw is securely fixed on the bar. Next, measure the desired segment (equal to the radius of the circle), and screw a self-tapping screw into the center, which will serve as the axis of rotation.

What can be cut with a jigsaw

You can often hear that the collection of every home craftsman should have a jigsaw. But how many of us know what can be done with a jigsaw?

The scheme of sawing a tree using a jigsaw.

Meanwhile, there are many operations carried out by this tool today. He will be interested in the first place of those craftsmen who are not content with a somewhat rough hacksaw on wood. The jigsaw is primarily intended for jobs that require particularly high quality finishing and maximum cutting precision. In particular, if the master decided to make a stylish wardrobe with his own hands or cut out the original wood trim on the wall, the use of a jigsaw turns out to be almost inevitable.

READ  Circular Saw For Wood How To Choose

How to solder efficiently without a soldering iron.

What can be done with an electric jigsaw?

You can often hear that the collection of every home craftsman should have a jigsaw. But how many of us know what can be done with a jigsaw?

The scheme of sawing a tree using a jigsaw.

Meanwhile, there are many operations carried out by this tool today. He will be interested in the first place of those craftsmen who are not content with a somewhat rough hacksaw on wood. The jigsaw is primarily intended for jobs that require particularly high quality finishing and maximum cutting precision. In particular, if the master decided to make a stylish wardrobe with his own hands or cut out the original wood trim on the wall, the use of a jigsaw turns out to be almost inevitable.

How to solder efficiently without a soldering iron.

What and how can be done with a jigsaw: functionality

A wide range of cutting operations can be performed with this power tool. First of all, this applies to various works in the construction and repair sector, in the production of furniture products, as well as for everyday household management, when it is periodically required to do minor repair and restoration work.

This application was made possible by the design of the electric jigsaw.

Jigsaw saws.

With a jigsaw, you can make various connecting components with a fairly high degree of accuracy. The specified power tool is used in the production of accurate bevel cutting at the corner joints of wooden (plastic) workpieces with each other. A jigsaw is practically indispensable in cases where trimming is performed at the joints of flat wooden panels.

A special area of ​​application of the device is the manufacture of various openwork wood cladding of both individual pieces of furniture and the entire room interior. In this area, the jigsaw is traditionally unmatched. With its help, talented craftsmen create wall shelves, furniture facades, details of wall decor, etc. That are completely unique in shape and beauty.

The possibilities of artistic application of the jigsaw are due to its design. The small width of the saw blade and its fixation in the body of the device with only one end significantly increases the maneuverability of the mechanism.

Thanks to this design, with a jigsaw, it is still possible to cut holes of various diameters and shapes (figures with a closed contour) without disturbing the outer contour of the cut out figure. To do this, first of all, you will have to drill an initial hole on the workpiece, which in diameter should be equal (or slightly larger) to the width of the saw blade. Next, a file is inserted into the hole, the electric drive is turned on and the jigsaw is wired along the contour marked with a pencil. It should be noted that the specified function in many cases can be very important and even defining.

Some factors affecting the functionality of the jigsaw

Jigsaw speed selection for different materials.

Traditionally, jigsaws are used to process wood materials or workpieces from soft materials (plastic, plasterboard panels, laminate). However, thanks to the use of saw blades made of special metals and their special designs, today the range of functionality of this power tool has expanded significantly. In particular, at present, jigsaws are actively used when cutting metal sheets, fragile glass and ceramic workpieces.

Any electric jigsaw works on the basis of the principle of converting the rotational motion of the electric motor rotor into the reciprocating motion of the saw blade through a special reducer. It should be borne in mind that cut quality largely depends on a number of technical factors.

So, relatively cheap jigsaws are often distinguished by not very powerful electric motors. Because of this, it is rather difficult for the device to develop a high cutting speed. this is the key to high quality processing of workpieces.

In order for this factor not to affect the quality, a pendulum mechanism is provided in many jigsaws. With its help, a rather complex movement of the file along the trajectory is formed. not only up / down, but also slightly forward / backward.

This additional "wiggle" of the working element carries out preliminary filing of the material in front of the leading edge of the teeth of the blade. The pendulum trajectory makes it possible not only to increase the cutting speed of the workpiece, but also significantly reduces vibration and wear of the blade, since not all teeth are simultaneously involved in the work. In addition, with this trajectory of movement of the file, its heating is reduced and chips are effectively removed from the place of sawing.

READ  Than Saw Stone Countertops

In expensive models of jigsaws, this option can be adjusted. This, as a rule, is done in order to connect one or another operating amplitude mode when switching from one processed material to another. In particular, the maximum forward / backward motion of the saw blade is used when a softwood workpiece is being cut. Medium pendulum amplitudes are used for an especially accurate and clean cut of a solid wood or plastic panel.

The vibration level of the device also affects the efficiency of the device. Low vibration makes the cut quality higher, and the operation of the equipment itself is more convenient for the worker. This factor must be taken into account when buying a tool, pre-checking it for the degree of vibration.

What is an electric jigsaw?

This device belongs to the class of cutting tools powered by an electric drive. In fact, this is an electrified version of the hand jigsaw. Its working cutting body is a fairly narrow saw blade, which cuts the workpiece due to reciprocating movements in the vertical plane.

Due to its design features, including due to the relatively small size of the file, using the specified power tool, it is possible to perform a variety of cutting operations in a straight and curved configuration. The use of the device also makes it possible to cut through holes of various sizes and shapes in wooden (plastic) panels and blanks. over, the thinner the saw blade will be, and the faster it moves during operation, the thinner the edges of the cuts will be.

To date, jigsaws of different design and purpose are known. So, they are divided into manual and stationary, for home use and professional models (designed for a fairly long and intensive operation in conditions, for example, of a furniture factory).

There are also electric saws with one or two handles. The first option is sometimes called marching, since it does not imply the presence of special devices at the cutting site for rigidly fixing the workpiece. The performer has to hold the workpiece with the other hand.

Accordingly, two-handed models are good in that they can be held with both hands, while the workpiece is firmly fixed with some fixing devices to the base of the machine. As a result, this circumstance has a very favorable effect on the high quality of workpiece processing.

How to choose a jigsaw: some useful tips

The first requirement that a master should be guided by when buying a jigsaw is the type of work for which it is purchased. For example, for straight-line cutting of chipboard, plywood, foam and other relatively soft materials, the presence of a pendulum device in the scheme of the device, which was mentioned above, is very useful. However, if you plan to use a jigsaw to cut wood materials, then the presence of a pendulum "addition", which also increases the cost of equipment, is not at all necessary.

In order to effectively work with a jigsaw on sheet metal, you should pay attention to mechanisms with a large electric motor power and a particularly rigid saw blade fastening. Standard electric jigsaws designed for metal cutting typically consume 280-550 watts.

At the same time, for cutting metal, it is necessary to choose electric jigsaws with a high speed of movement of the saw. At the same time, for plastic, the low speed of the reciprocating oscillation of the canvas will be sufficient.

Thus, choosing the optimal cutting equipment is not a big deal. If you do everything in accordance with the requirements for jigsaws, then a very useful and effective tool will appear in the workshop of a home craftsman that can be used every day.