What File Is Needed For Stihl 180

What File Is Needed For Stihl 180

The cheapest way to grind a saw is to purchase chainsaw sharpening file and do it yourself without any help. However, this scenario involves a lot of nuances. You need to know how to choose a file, what characteristics you should pay attention to, study the sawing technique, and, in the end, have patience, sharp eyesight and hard hands. The last three factors are mandatory, because without them it is impossible to carry out the correct grinding with a file.

Chainsaw file sharpening files

How to choose a file for sharpening a chainsaw chain

Most users wonder: how to choose a file for sharpening a chain of a chainsaw. The answer is complex, because implies a lot of options. But the most correct way is to pay attention to the chain pitch. The size (diameter) of the cylindrical file depends on it. But besides him, a second one is also required. flat.
Two files are used for sharpening different parts of one link. If we consider the process in more detail, a saw tooth of the link, namely the end and upper blades, is sharpened with a cylindrical file. Cut the cutting depth limiter with a flat file. It is important that both files can be purchased as a kit with a set of templates and a hook for cleaning the saw and tire from the saw set. Some manufacturers of chainsaws and their electrical chain counterparts even produce such sets themselves.

Different types of files for sharpening the saw chain

Chainsaw file sharpening diameter

The diameter of the file for sharpening the chain of the chainsaw is very important in the process of selecting a tool. An incorrectly selected file will ruin the chain, which will cause problems during the sawing process. The saw can get stuck inside the tree, break and cause damage to an expensive tool.
The diameter directly depends on the chain pitch. When sharpening, 4 main diameters are used, corresponding to their pitch:
Pitch ¼ ”- diameter 4.0 mm;
Pitch 0.325 ″. 4.8 mm;
3/8 ″ pitch. 5.2 mm;
Pitch 0.404 ″. 5.5 mm.
For some types of chains, files with a diameter of 3.2 mm are also used.

Video: What File Is Needed For Stihl 180

Different file diameters for sharpening chainsaw chains

Files for sharpening chains of Stihl Stihl chainsaws

There are various files on the market for sharpening chains of Stihl Stihl chainsaws. Despite the external differences, they are all branded. Some of them are components for grinding machines and are sold in packs of several pieces. They do not have handles, so they are inconvenient to use without a base. Files sold in individual packaging may be included or sold on their own. There are 2 options. with a template for sharpening and without it.
In addition to files, Stihl also produces a number of accessories:
filing gauges;
sharpening mandrels;
templates (holders) of different types;
Filing gauges are designed to check the depth of sharpening, to clean the grooves and drill corners manually.
The mandrel is a plate with guides printed on it, indicating the angle of sharpening of the link. Moving in accordance with the guides is easier to maintain the correct degree of angle. It is attached with magnets to a metal rail.
The clamp works on the principle of a holder and allows for one step to sharpen the cutting and restrictive teeth of the link.

Stihl chainsaw sharpening files

Proper sharpening the chain of the chainsaw with a file

It is easiest to start sharpening directly on the tire, but some manufacturers oppose this, citing various arguments, and recommend removing the chain from the device and securing it in a vice. But this is extremely inconvenient, because after sharpening each link, you have to dismantle the chain and reinstall it.

If, nevertheless, the chain is sharpened directly on the saw, the weight of the tire can move under pressure from the hand with a file, so you need to set a stop, for example, a block of wood, from the back edge for the tire. It is important to clean the chain from sawdust, grease and debris before sharpening. This will simplify the work.

Correct file chain sharpening

Begin sharpening with the most honed tooth. It is on it that everyone else will be aligned. If the tooth is broken, it must be replaced by unfastening the chain with a special machine and installing a new element of the appropriate size and type. After the item is selected, sharpening begins. A file is moved directly from itself along the semicircular edge of the sawing tooth, resting against the edge of the adjacent chain link with a template. In this case, it is necessary to observe the parallelism between the file and the plane of the surface on which the saw or vice is mounted, as well as the angle of the guide indicated on the plate template.
Thus, all chain links are processed alternately through one, i.e. only those that are on one side of it. At the end, they move to the other half of the links and perform the same operation, but at the opposite angle, also indicated on the guide in the template. After completion, the file for sharpening the chain of the chainsaw is laid aside, and the chain is swept with a brush, eliminating metal shavings.