What gasoline to refuel a stihl benzotrimer. Fuel preparation for two -stroke units

What gasoline to fill in the Stihl lawn mower

For a two.stroke engine, the main operation of maintenance is the maintenance of the air filter. The frequency is 10 hours of work. When cleaning, the material in warm soap water is washed. Before installing back, the surface is slightly impregnated with oil.

At the same time, check the cleanliness of the fuel filter (if any). However, it is better to clean the fuel mixture when refueling a trimmer for grass. The spark plug is checked regularly for the formation. The gap between the electrodes should be 0.5 mm.

With regular care and proper operation, a trimmer for grass will last many years.

You will need the above accessories to mix components. Special canists with two openings for oil and gas can also be found on sale. Everything is very simple here, pour the ingredients, close the lid tightly and mix, tilting the container. You can use glass and plastic bottles.

Water or dust should not fall into the fuel mixture.

Good to know

Fuel should be prepared for 3 gas stations. After all, storage of a large amount of fuel can adversely affect the work of the chainsaw. The mixture can behave differently because it will depend on many factors. As a result, your household device can be seriously damaged, which will lead to financial costs.

Sometimes even a container can affect the quality of the liquid. Plastic and glass react with gasoline, which can create a risk of sudden fire.

It is important to remember that in the case of a breakdown of the chainsaw due to poor or incorrect mixture, the device will not be able to extend the guarantee. The finished liquid cannot be stored for more than a month due to the oxidation process

After the chainsaw operation, the remaining fuel should be spent, the engine is turned off, and the residual fuel mixture is removed

The finished liquid cannot be stored for more than a month due to the oxidation process. After the chainsaw operation, the remaining fuel should be spent, the engine is turned off, and the residual fuel mixture is removed.

Fuel consumption

The owners of the power tool are faced with one of the most important questions: everyone wants to know what to expect.

The volume of almost all containers is approximately 500 ml. If the power of the chainsaw is 2 kW, fuel consumption will be approximately 1.2 liters per hour. Simply put, such a tool can work at a maximum speed within half an hour without a break. If the chainsaw is not so powerful, its volume will be smaller. This allows the user to control the fuel consumption on his own.

Over time, the user will learn to serve his tool without outside help. The main task is to maintain a business unit in good working condition using high-quality fuel mixtures. Follow the safety rules for the preparation of combustible liquids. This will help save the tool in safety and not harm yourself and the environment.

Useful tips:

• Sometimes it is better to pour a little oil than save. If you give a little more oil than indicated in the instructions, nothing bad will happen. The formation of carbon dioxide is possible in the case of a large amount of oil and in case of non.compliance with certain proportions;
• It is better to store the finished mixture for a month, and not longer, because for some reason it will lose its quality;
• Correct disconnection. Be sure to use or drain the contents of the tank so that you can continue to use rubber and plastic seals;
• Do not use mopeds for chainsaws, as they are designed for low speeds.

How much gasoline is stored

During long.term storage, gasoline evaporates (regardless of the brand), a precipitate falls at the bottom, it loses its properties, in other words. it spoils. It is worth knowing that not so much gasoline itself is ignited as its pairs. Therefore, if in the garage there is a canister with gasoline since last year, then think about whether it is worth? Better leave it to the rod of a barbecue bonfire.

The use of “stuck” gasoline for a chainsaw entails many problems:

It is worth remembering that the prepared fuel mixture (gasoline with oil) is stored for no more than a month, after this time it should be disposed of. The use of the old mixture increases the wear of the parts of the chainsaw engine. do not forget about it!

The proportions of the fuel mixture

If the mixture is diluted correctly, for example, in compliance with the instructions below, then the technique will last you for more than one year without serious technical breakdowns. In this case, fuel consumption will be low, and the result of the work is high. The process of making fuel should always be the same and constant. Ingredients are always better to use the same, without changing the brand indicated by the manufacturer.

Do not add a lot of oil, it can damage the engine to work, but you should not save on it either. To comply with the correct proportions, always use one and the same measuring container so as not to make mistakes with the quantity. To measure the oil, you can use medical syringes, but some manufacturers, together with the oil, provide a measuring container with risks.

The most correct ratio of oil and gasoline is 1 to 50, where 50 is the amount of gasoline, and the amount of oil is 1. For a better understanding, let’s explain that 1 liter is 1000 ml. So, in order to get a proportion of 1 to 50, 1000 ml, we divide into 50, it turns out 20 ml. As a result, only 20 milliliters of oil should be added to 1 liter of gasoline. For dilution of 5 liters of gasoline, you will need 100 ml of oil.

In addition to compliance with the correct proportion, it is necessary to observe the technology of mixing ingredients. In no case can you just add oil to the gas tank. It is better to follow the next step.by.step instruction.

• To dilute the mixture, you need to prepare a container in advance in which you will mix gasoline and oil. It can be a pure metal or plastic canister with volumes of 3, 5 or 10 liters, so that it is easier to calculate the amount of oil. Do not use drinking water bottles for this purpose-they are made of thin plastic, which can dissolve from gasoline. To measure the oil, use special measuring containers. But if this is not, then, as already noted, medical syringes with a large dosage are suitable.
• Pour gasoline into the canister, not adding a couple of centimeters to full. In order not to pour gasoline, take the watering can or in the neck of the canister insert the funnel. Then, in a syringe or in a measured device, dial the desired amount of oil and pour into a container with gasoline. It is not recommended to do the opposite. to pour gasoline into the oil.
• Close the lid tightly with a bottle and stir the resulting mixture. If, in the process of preparing the mixture or mixing, part of the fuel spilled, you must immediately wipe the canister with a dry rag.
• Be sure to follow fire safety measures. Dilute the mixture away from the fire and in no case leave the remaining fuel and the materials used in free access for children.

And one more important point: it is better to prepare the mixture exactly the amount that fuels in your motorcycle fuel tank. It is undesirable to leave the remnants of the mixture.

Which lawnical mower to opt for?

In order to have a beautiful green lawn on your site, you need to constantly care for it, namely, cut the grass. Therefore, it is important to purchase a high.quality gasoline trimmer for grass, which will last a long time. The modern market for lawn mowers offers a huge range of products, so it is often difficult to make your choice in favor of a particular model, especially beginners.

When choosing an unit, some rules should be followed:

• Among the wide variety of models, you should opt for units with high power, since it is on this indicator that the fast and effective work of the trimmer for grass will depend on this indicator. The motor should start without effort and have a system that regulates emissions of harmful substances. For home use, an unit with a little weight is suitable;
• The size of the tank depends on the time of continuous operation of the machine. The more fuel is flooded in the tank, the more time the lawn mower can work, but the weight of the tool in this case will be greater;
• If you need to purchase a trimmer for grass, the noise level of which will be small during operation, it is better to opt for devices with a four.stroke engine. The cost of such devices is higher than with a two.stroke engine, but in work they are much easier and more pleasant;
• If you plan to download a large number of weeds or hay harvesting, it is advisable to dwell on professional trimmers that can withstand significant loads for a long time. If the work is carried out exclusively for the refinement of landscape design, then attention should be paid to the cutting parts of the apparatus;
• The presence of a large number of trees, shrubs or stones on the site excludes the use of a trimmer for grass with metal knives. In this case, it is better to prefer a model with a cutting fishing line, which will eliminate damage to the trees and the tool itself;
• The convenience of operating the unit also depends on its handle. To work in large areas and a wide lounges, you should stop the choice on the T-shaped handle, and for processing impassable thickets it is advisable to purchase a trimmer for grass with a D-shaped handle.

Advantages of a gasoline trimmer for grass

The gas mowing with a gasoline engine has several advantages:

• high power and performance;
• the possibility of refueling at any time of operation;
• the ability to use the nozzle. a rotor for cutting small trees or shrubs;
• mobility (the ability to use anywhere in the site or in the field).

A gasoline engine braids are available with a tank volume of 0.5 liters, 1 liter and 1.5 liters.

Advantages and disadvantages of the model

The Stihl FS130 lawn mower is characterized by high reliability, with proper maintenance, it works reliably. A big advantage is the possibility of impeccable mowing of grass in hard.to.reach areas, where an ordinary lawn mower cannot cope. In addition, a trimmer for grass is able to clean the territory of shrubs, thin trees.

Of the shortcomings, the owners note difficulties with the launch at low temperatures, the engine can be zedled. In order to avoid injuries and breakdown of a trimmer for grass, the owner should carefully study the leadership before operation, use knives, cutting and saw canvases strictly in accordance with the functionality of the Stihl FS130 motorcycles.

In general, STIHL’s lawn mowing is not particularly difficult, in more detail with the Rules for Service and Safety during work, you can familiarize yourself with the factory operating instructions.

Currently, the Stihl FS130 lawn mower is removed from production, a more advanced model of the Stihl FS131 mower is produced instead of it.

Description

The Stihl FS130 lawn mower belongs to heavy devices due to equipment with a 4-stroke engine with a power of 1.9 liters.With.

The technical characteristics of this professional model allow you to easily mow grass on the site up to 20 acres.

Thanks to this power, the gas station will cope not only with the mowing of small vegetation, but also a small shrub. The gasoline engine starts manually.

The fuel tank of the trimmer for grass contains 0.55 liters. gasoline, so you can work with a trimmer for a long time without refueling.

The Stihl FS130 lawn mower is equipped with a vibration repayment system, which prevents the operator’s rapid fatigue.

A system of attaching the mowing on the shoulder belt is also provided, so the mass of the device, which is 5.9 kg., It is evenly distributed. The handle is adjustable, allowing you to select the optimal slope.

What gasoline can be poured into a trimmer for grass?

Before finding what gasoline can be poured into a trimmer for grass, you need to determine some concepts used.

• Trammers for grass can be with four.stroke or two.stroke engines. Four.stroke trimmers for grass are more massive and complex in design, lubrication of the details of its motor is carried out due to the oil pump. The engine works on clean gasoline. For two.stroke units. more ordinary. The manufacture of fuel consistency consisting of gasoline and oil is required. Here is due to the amount of oil that is in combustible, and the rubbing parts in the cylinder of this motor are lubricated.
• For the manufacture of consistency, gasoline of a certain AI-95 or AI-92 brand is needed. The brand of gasoline is located depending on its ignition rate. octane number. The lower this indicator, the more freaks burning gasoline and its larger consumption.

Many lawn mowers have two-stroke engines that work to a greater extent on AI-92 gasoline. Fuel for them must be connected without the help of others. It is better to pour gasoline in Motokos, the brand that is determined for it by the manufacturer, another trimmer for the grass will be out of order. For example, with gasoline of the AI-95 brand, the engine will rapidly overshadowed, and when choosing AI-80, the fuel mixture comes out completely low, because the work of the motor will be unstable and with low power.

In addition to choosing a brand of gasoline, in the manufacture of fuel, move for motorcycles, it is necessary to use a special oil designed specifically for two.stroke engines. For lawnmands, semi.synthetic and synthetic oils are perfect. Semi.synthetic oils are on average price spectrum, suitable for such technology from at least some manufacturer, well lubricate the necessary elements of the motor. Synthetic oils. more expensive, but when using them, the engine will work longer. In any case, when buying equipment, you should closely familiarize yourself with the annotation, because from time to time the manufacturer gives advice on the use of certain brands of oil.

If you purchase Russian oil oil, then it should be labeling on it.2t. For a long service of your equipment and its condition, it is never necessary to use unknown oil oils.

The 4.stroke engine used in the lawn mower is inferior in many technological indicators of 4 strokes. With separate supply of gasoline and oil for economy and second indicators, it is better for light technology. Now separate feeding fuel saves the consumption of an expensive component 4 times.

In the photo, the condition of the engine that worked without changing the oil for a long time.

The four.stroke engine has a complex lubrication system, and even more it is necessary to use methods of cleaning circulating water. A filter is installed in the oil system, which prevents the clogging of the tubes and the pump by wrap and the principles of inclusion. During the pollution, this part is replaced.

The manufacturer in the operating instructions gives a schedule for maintenance of devices and the procedure for operating work. The efficiency of lubrication is miniaturized after 50 hours of operation of the mechanism. After oil change is required after. In domestic use for the season, this time of use of the device will not be gained, and create a filter cleaning, oil change is necessary when preserving. Before changing the oil to the lawn mower, it is necessary to increase the fluidity of the water, start the engine and let the system warm up.

Correct ratios and cooking for popular manufacturers

Different manufacturers recommend different proportions for their chainsaws

Their observance is followed with attention. The lack of lubrication leads to the failure of the internal combustion engine

An excess. to the loss of power, smoke, the formation of soot with all the above problems.

How to dilute for StiHL, in particular for the MS 180 model

The manufacturer recommends for motors of its chainsaws, including the STIHL 180 ms HP Ultra oil in a proportion of 1:50. It provides the highest capacity, service life and cleanliness of the ICE. It is also recommended to use motor oils in cans with the inscription STIHL

It is important to purchase original, but not counterfeit products here

In the case of a mix of oil and gasoline, not so. The mixture can be stored up to 2 years. After long storage, the container must be shaken to mix the possible precipitate.

Motomix is ​​a ready.made fuel mixture from Stihl, very comfortable when there is no time or the opportunity to mix liquids in place

How to dilute for a Husqvarna saw

The manufacturer in the operating instructions recommends using special oil for Husqvarna. It is adapted to the engines of this manufacturer, provides a long service life and quality work. Poured in a ratio of 1:50.

It is allowed to use oils for two.stroke air.cooled ICE from other manufacturers. If a proportion is not indicated on the canister, the manufacturer of the chainsaw of Husqvarna recommends pouring an increased dose in the proportion of 1:33.

Thus, for 1 liter of gasoline for the chainsaw, Husqvarna is flooded:

• 20 ml (in the colloquiality of grams) Husqvarna oil (1:50).
• 20 ml of other acceptable oil, if 1:50 is indicated on the canister.
• 30 ml per 1 liter of gasoline, 1:33, if another proportion is not indicated.

Husqvarna does not recommend storing the cooked mixture longer than 30 days. Before pouring a defended mixture, it is necessary to shake.

The ratio of oil and gasoline for Partner chainsaws, in particular Partner 350

For its saws, including model 350, Partner recommends using Talon branded oil in 1:40, that is, 1 part for 40 parts of gasoline.

In order to calculate the need for 1 liter (1000 ml), 1000 should be divided into 40. Result. 25 ml per 1 liter (1000 ml) of gasoline.

In the instructions of this manufacturer there is no information about the permissible replacement of the recommended Talon oil with others. In practice, oils for two.stroke engines with air cooling and other brands are used. In this case, the proportions are recommended already by oil manufacturers and are indicated on the canister.

Pay attention to the canister, the inscription 1:40, this once again confirms that each oil has its own recommended mixing proportions with gasoline

How to breed gasoline with oil huter

The manufacturer Huter does not release any one brand for his chainsaws for his chainsaw. There are recommendations for a general type. JASO FC classification oil or others: API TV, API TS, JASO FB for two.stroke ICE of air cooling.

In the operating instructions, Huter himself does not call proportions, but indicates that the mixture is compiled in the proportion indicated by the manufacturer of the oil.

For example, if the canister indicates 1:50. 20 ml per 1 liter of gasoline is poured. If indicated 1:40. 25 ml per 1 liter.

How much oil per liter of gasoline is poured into champion chainsaws

For its chainsaws, Champion recommends using Champion oil for two.stroke high.speed air.cooled ICE. Proportion 1:50, that is, for 1 liter of gasoline 20 ml.

In addition to the CHAMPION proprietary, the use of oils for the same engines of other brands is allowed. over, it must comply with the standards of the API TV/C or JASO FC/D, which should be indicated on the label of the canister.

How many grams of oil per 1 liter of gasoline are needed for makita saws

Makita, recommends for its gasoline saws, Makita oil for high.performance two.stroke engines

Makita pays attention to environmental protection. Oils of this brand have a minimum of polluting exhaust

Recommended proportions 1:50, 1 liter is poured 20 ml. It is allowed to replace with analogues of other brands, provided that they meet the international standard TS-3. At the same time, it is recommended to add more oil in the instructions, 1:40, for 1 liter 25 ml.

The proportions of the fuel mixture

If the mixture is diluted correctly, for example, in compliance with the instructions below, then the technique will last you for more than one year without serious technical breakdowns. In this case, fuel consumption will be low, and the result of the work is high. The process of making fuel should always be the same and constant. Ingredients are always better to use the same, without changing the brand indicated by the manufacturer.

Do not add a lot of oil, it can damage the engine to work, but you should not save on it either. To comply with the correct proportions, always use one and the same measuring container so as not to make mistakes with the quantity. To measure the oil, you can use medical syringes, but some manufacturers, together with the oil, provide a measuring container with risks.

The most correct ratio of oil and gasoline is 1 to 50, where 50 is the amount of gasoline, and the amount of oil is 1. For a better understanding, let’s explain that 1 liter is 1000 ml. So, in order to get a proportion of 1 to 50, 1000 ml, we divide into 50, it turns out 20 ml. As a result, only 20 milliliters of oil should be added to 1 liter of gasoline. For dilution of 5 liters of gasoline, you will need 100 ml of oil.

In addition to compliance with the correct proportion, it is necessary to observe the technology of mixing ingredients. In no case can you just add oil to the gas tank. It is better to follow the next step.by.step instruction.

• To dilute the mixture, you need to prepare a container in advance in which you will mix gasoline and oil. It can be a pure metal or plastic canister with volumes of 3, 5 or 10 liters, so that it is easier to calculate the amount of oil. Do not use drinking water bottles for this purpose-they are made of thin plastic, which can dissolve from gasoline. To measure the oil, use special measuring containers. But if this is not, then, as already noted, medical syringes with a large dosage are suitable.
• Pour gasoline into the canister, not adding a couple of centimeters to full. In order not to pour gasoline, take the watering can or in the neck of the canister insert the funnel. Then, in a syringe or in a measured device, dial the desired amount of oil and pour into a container with gasoline. It is not recommended to do the opposite. to pour gasoline into the oil.
• Close the lid tightly with a bottle and stir the resulting mixture. If, in the process of preparing the mixture or mixing, part of the fuel spilled, you must immediately wipe the canister with a dry rag.
• Be sure to follow fire safety measures. Dilute the mixture away from the fire and in no case leave the remaining fuel and the materials used in free access for children.

And one more important point: it is better to prepare the mixture exactly the amount that fuels in your motorcycle fuel tank. It is undesirable to leave the remnants of the mixture.

You will need the above accessories to mix components. Special canists with two openings for oil and gas can also be found on sale. Everything is very simple here, pour the ingredients, close the lid tightly and mix, tilting the container. You can use glass and plastic bottles.

Water or dust should not fall into the fuel mixture.

Good to know

Fuel should be prepared for 3 gas stations. After all, storage of a large amount of fuel can adversely affect the work of the chainsaw. The mixture can behave differently because it will depend on many factors. As a result, your household device can be seriously damaged, which will lead to financial costs.

Sometimes even a container can affect the quality of the liquid. Plastic and glass react with gasoline, which can create a risk of sudden fire.

It is important to remember that in the case of a breakdown of the chainsaw due to poor or incorrect mixture, the device will not be able to extend the guarantee.

The finished liquid cannot be stored for more than a month due to the oxidation process. After the chainsaw operation, the remaining fuel should be spent, the engine is turned off, and the residual fuel mixture is removed.

Fuel consumption

The owners of the power tool are faced with one of the most important questions: everyone wants to know what to expect.

The volume of almost all containers is approximately 500 ml. If the power of the chainsaw is 2 kW, fuel consumption will be approximately 1.2 liters per hour. Simply put, such a tool can work at a maximum speed within half an hour without a break. If the chainsaw is not so powerful, its volume will be smaller. This allows the user to control the fuel consumption on his own.

Over time, the user will learn to serve his tool without outside help. The main task is to maintain a business unit in good working condition using high-quality fuel mixtures. Follow the safety rules for the preparation of combustible liquids. This will help save the tool in safety and not harm yourself and the environment.

Useful tips:

• Sometimes it is better to pour a little oil than save. If you give a little more oil than indicated in the instructions, nothing bad will happen. The formation of carbon dioxide is possible in the case of a large amount of oil and in case of non.compliance with certain proportions;
• It is better to store the finished mixture for a month, and not longer, because for some reason it will lose its quality;
• Correct disconnection. Be sure to use or drain the contents of the tank so that you can continue to use rubber and plastic seals;
• Do not use mopeds for chainsaws, as they are designed for low speeds.

The correct operation of the equipment is completely dependent on you. First, do not neglect the specifications of the manufacturer or, in extreme cases, instructions on the packaging of oil. This will help to avoid unpleasant situations. The neighbor does not always know what to do is best. The cheapness of oil and gasoline is not an indicator of high quality, because the breakdown of the tool can be much more expensive (about 80% of the cost of the chainsaw) than the money saved on the fuel mixture.

Features of refueling motorcycles

When the mixture is prepared and ready for use, it must be carefully poured into the fuel tank. Since gasoline is toxic fluid, when working with it, it is necessary to observe safety measures. Work must be carried out in calm weather and far from extraneous. And also to fill the fuel into the tank, you need to use a watering can or a funnel with which you previously bred a mixture. Otherwise, the mixture can be flooded, unnoticed, and when heated by the engine, ignite.

The fuel bank itself must be cleaned of external contaminants and only then unscrew its lid to season with the prepared fuel. After the fuel is flooded, the tank should not be left open, since insects or earth can get into it, as a result of which the fuel filter will occur. It is necessary to pour fuel into the tank to the indicated mark or less, and then add during work.

As noted above, you should not prepare the mixture more than necessary for work, it is better to prepare less and, if necessary, repeat the process, mixing gas with oil again. If unused fuel remains, then it must be used in 2 weeks.

During storage, the container should be tightly closed by the lid. It is necessary to store fuel in a cool room, in a place where the sun’s rays do not penetrate. It is worth remembering that with prolonged storage of the mixture, the oil lifts and loses its properties.

Whatever brand your technique is, it requires careful attitude and high.quality fuel. If you follow all the recommendations and economically use fuel, your lawn mower will last you more than one season, and the land will always be in perfect order, without weeds and dense thickets of grass.

Fuel consumption

One of the most important issues that the owners of the sawing tool appears, because everyone wants to know what to count on.

The volume of actually all tanks is approximately 500 ml. If the power of the chainsaw is two kW, then the fuel consistency consumption will be approximately 1.2 liters per hour of operation. To say simply, then such a tool will be able to work for the greatest speed for half an hour without a break. If the chainsaw is not so powerful, then the volume of the tank will have much smaller. So the user can control the fuel consumption without the help of others.

Over time, the user will learn how to create a service of his own tool without any help. The main task is to preserve the economic unit in a good job, using high.quality fuel consistency. Observe the safety rules in the manufacture of combustible water. This will help save the tool, also not to harm for yourself and the environment.

Advantages of STIHL oil

note! Recently, fakes of original oil in unscrupulous sellers have become widespread on the territory of our country. Using it with a professional tool can lead to a major engine breakdown.

How to distinguish the original stihl oil from a fake?

• the neck and the lid are sealed;
• On the back side indicates the date of roslice;
• Pictures are clearly printed, without lubrication and strokes;
• The name on the label is written in many languages;
• convex measured line of liters;
• relief inscriptions and a soldered bottom.

Alas, sometimes the appearance of the packaging and bottles is practically no different from the corporate party. The main guarantee of acquiring really high.quality STIHL oil is to buy it only from an official dealer.

Therefore, before saving on the purchase, know that the repair of a spoiled device will cost ten times more expensive. Plus, when using counterfeit lubrication and components, it loses an official guarantee from the manufacturer.

Why is it worth ordering STIHL oil from us?

• Free delivery on the day of order by
• Shipment at night. Metro Tula, ul. Pavlovskaya 27/29.
• Sending a transport company to any region

To buy stihl engine or adhesive oil, place an order on the site or call or to clarify information from a specialist.

Preparation of the mixture

Many novice users are sure that if you add oil oils to the fuel mixture more than necessary, it will benefit. This is not true. Uninhabited oil is not excreted from the engine with exhaust gases, but will settle inside in the form of soot. This plaque threatens the integrity of the piston. If you use the mixture with an excess of oil regularly, then the trimmer for the grass will be greatly smoked, and the drop in power is inevitable.

With a lack of oil, the trimmer for the grass will overheat, the piston rings will be destroyed and the piston jams. If the oil deficiency is insignificant, then the trimmer for the grass will work 30. 40% less than the resource. If the lubricant is not enough more than 20%, then the motor will jam after 20. 30 minutes of intensive work. Each instructions for the trimmer have proportions on how to dilute the fuel mixture. This is usually 1:25. 1:40 or 1:50. In practice, it looks like this:

• 1:25. 40 milliliters of oil per 1 liter of gasoline;
• 1:40. 25 milliliters of oil per 1 liter of gasoline;
• 1: 50. 20 milliliters of oil per 1 liter of gasoline.

By the table, you can determine how much oil is poured into a certain volume of pure fuel:

How to mix

If you do not have a special measuring canister with divisions that are included in the set of the Trammer deserving attention for the grass, or such a container has been lost, then use any suitable container. Better glass or metal. Plastic can also be used, but you need to choose a bottle with hard walls.

The capacity of the vessel should be a multiple of 1 liter. You can take a bottle and 1.5 liters, but practice shows that it is not very convenient. You also need a medical syringe, preferably 20. 50 milliliters. First, gasoline is poured into the container, then an accurate amount of oil is added (by volume). The procedure cannot be changed.

If you have Pre Mix oil, then you need to close the bottle or canister and turn it upside down several times and shake it hard. If Self Mix oil, then it will dissolve on its own. The prepared mixture must be used throughout the day. If you know how much fuel is the trimmer for grass for a certain amount of work (or time), then calculating the amount of the mixture is not difficult. Otherwise, before each refueling, dilute the new fuel so that the minimum amount remains until the end of the work.