What gasoline to refuel a STIHL chainsaw. We make a mixture: important proportions

What gasoline is pouring into a chainsaw 180

Hello! Glad to see you again, dear readers and subscribers of the blog Andrei Noac. Everyone who has a chainsaw at home, he already knows exactly what gasoline and how to fill it. But to the one who only wants to acquire such an unit, the article will seem entertaining.

Chainsaw is one of the most convenient and universal household units. Before use, you need to prepare the fuel mixture. But for the unit to work correctly, you need to follow all the recommendations of the manufacturer. Each model is individual, so what gasoline to fill in a chainsaw?

How to refuel a chainsaw to extend the service life?

The engine of a modern chainsaw is one- or two-cylinder carburetor engine. As a rule, two.Stroke models are installed, although four.Stroke. The speed of rotation of the working shaft reaches 13.5 thousand. Revolutions, which puts forward strict requirements for the quality and composition of the fuel mixture.

Manufacturers inform users in sufficient detail how to refuel a chainsaw, but for many this question remains not entirely clear. Consider it more attentively.

Features of the device of the chainsaw

The chain is a chain manual tool, whose cutting organ is driven by a carburetor engine.

As a rule, this is a single.Cylinder two.Stroke motor.

This design is simple, economical, capable of working in any position.

The structure of the saw, in addition to the engine, includes:

  • Carburetor;
  • Tire;
  • Cutting organ (chain);
  • Starter;
  • Clipper Clutch of centrifugal type;
  • Ignition, fuel supply system, air filters;
  • Chain lubrication system;
  • Muffler;
  • Handles.

The engine can be located vertically (powerful professional models of large weight) or horizontally (light household tools). Heavy saws are used for rolling and cutting out trunks, they have a large size of the frame. Light saws are used for cutting branches or sawing firewood, they usually acquire owners of private houses, farmers, gardeners, etc.P.

The design of the tool is simple, which is a guarantee of high strength and reliability. The engine shaft through the clutch coupling sets in motion a leading star that moves the chain along the tire using a leading star. The two.Stroke engine does not need the distribution val, the valve system and other elements, which also helps to increase the reliability of the structure.

The centrifugal clutch is equipped with two frictions, which are pressed to each other at low speeds of the shaft, and when the rotation speed is increased under the influence of centrifugal force, they are pressed to the outer part of the coupling and set in motion the leading star. The engine power determines the type of circuit. The more powerful the saw, the greater the chain step (the distance between the teeth, which determines the performance of the tool).

What fuel to use for chainsaw?

The choice of suitable fuel is an important and significant issue. The only correct approach to its solution is a careful study of the user’s instructions, which indicates the type and brand of fuel, the proportions of mixing gasoline and oil, and also reflects all the features of this tool. Modern standards require the use of high.Octane purified fuel and special types of motor oil.

Choosing gasoline

Many are interested in what gasoline the chainsaw works best. Most models require pure high.Quality fuel with an octane number not higher than 90. Sometimes on the network there are recommendations to mix 92 or 93 gasoline with 95 to increase its effectiveness. This should not be done in any case, since higher.Octane brands are often faked, and no one will dilute the A92 or AI92 brands.

Therefore, choosing which gasoline to pour in a chainsaw in the conditions of the domestic market, it is recommended to use just such fuel. It is necessary to ensure that gasoline is fresh enough, since with prolonged storage in it begins the release of resins and other elements that worsen the quality. Manufacturers recommend using:

  • Shtil chainsaw (STIHL) 180. It is better to refill with gasoline of the A90 brand and above;
  • Shtil 250. Works on gasoline with an octane number of at least 90. You should not use fuel with ethanol, exceeding 10 %;
  • Partner. It is necessary to use only unhealthy gasoline with an octane number of at least 90;
  • Khuskvarna. Gasoline with an octane number of at least 90, it is allowed to use pure fuel or with the addition of tetraethylsvin. Catalyst engines require the use of fuel-oil mixture from unhealthy gasoline.

As a rule, the owners of such tools use AI92 gasoline, which is fully consistent with the requirements of manufacturers. However, for most domestic chainsaws, A72 or A80 gasoline is quite suitable. It must also be borne in mind that the failure of the chainsaw due to the use of low.Quality fuel is not a warranty case.

The choice of oil

Two types of oils are used in the chainsaw. Motor and chain (adhesive). They cannot be confused, since the tasks that they perform differ from each other. Any transmission oil can be used to lubricate the chain, although manufacturers always recommend using the same materials of the same name. Requirements for motor oil is tougher. All manufacturers are unanimous in this matter. You should use the oil of the same company that made the saw.

There is no lubrication system in two.Stroke engines, which replaces the presence of a certain amount of material in fuel. The carburetor injects the fuel-oil fog, which simultaneously lubricates all the details. After that, the remains are burned in the cylinder. If there are no specific instructions in the instructions, any two.Stroke oil can be used.

For different tool models, manufacturers recommend:

  • For a chainsaw Shtil 180. The best option is STIHL HP, HP Super or HP Ultra;
  • Shtil 250. Properly use STIHL HP, HP Super or HP Ultra oil, the most efficiency shows the STIHL HP Ultra oil;
  • Partner. Any two.Stroke oil. It is forbidden to use automobile or ship oil, this will lead to the failure of the engine;
  • Khuskvarna. The manufacturer recommends using the Husqvarna two.Stroke oil. It is forbidden to use oil for four.Stroke engines, or for two.Stroke water.Cooled engines.

STIHL grease for two.Stroke engines

Shtil engineers develop oils that are optimally suitable for all two.Stroke engines installed on the chainsaws and trimmers of STIHL and not only. The line of lubricants for two.Stroke engines STIHL includes several product options:

STIHL HP review

Shtil HP is a lubricant for a chainsaw, designed taking into account high quality requirements and is designed to lubricate the internal parts of the engine when it operations. It is made on a mineral basis and is characterized by good combustion indicators (has a low level of excretion of harmful substances during combustion).

The original STIHL HP has red and is sold in STIHL proprietary packaging.

It is supplied in several variants of packing, the most popular of which is a bottle of one liter with a built.In dispenser. You can also find STIHL HP in cans of five, ten and fifty.Five liters.

The smallest STIHL HP packing, which is convenient to use in those cases when you need to prepare only one liter of fuel mixture, is a twenty.Gram plastic bottle.

Also, the company produces one hundred gram bottles of STIHL HP, which can be used to prepare five liters of fuel mixture.

The shelf life, subject to storage in a closed container, is 4 years.

STIHL HP Ultra review

Unlike ordinary oil, Shtil HP, HP Ultra is designed for high engine loads when operating and recommended for use on professional chainsaws. This oil is synthetic. In order for consumers not to confuse diluted fuel, it has a green color, respectively a finished mixture of gasoline with STIHL HP Ultra, also has a greenish tint.

There are only two packages of this oil. This is STIHL HP Ultra 100 ml and 1 liter with a dispenser.

The cost of STIHL HP Ultra is almost twice the price for STIHL HP and for this reason it is less popular in our country.

STIHL HP Ultra shelf life four years.

HP Super

Designed for high-performance engines and four-stroke, made using 2-Mix technology. The characteristics are slightly worse than HP Ultra, so at the moment HP Super is not supplied to the shelves of official dealers.

What gasoline to refuel a chainsaw of a calm 180

Specific proportions should be indicated by the manufacturer in the operating instructions. Quite often it is written in them that it is necessary to fill the gasoline of the AI-95 brand. But the octane number in the fuel of domestic production in most cases is caught up with various additives, which significantly reduces its quality. Therefore, for refueling modern STIHL chainsaws, it is recommended to use gasoline AI-92 brand.

Oils are selected specialized for a 2-stroke engine corresponding to the power class of the chainsaw-the best option would be the mixtures of the same name brand. They have red (mineral) and green (synthetic) color.

The fuel mixture of gasoline and oil is prepared in strict adherence to the recommendations of the manufacturer. For chainsaws, the proportions, as a rule, are 1:50, that is, 1 liter of AI-92 gasoline must be added 20 grams of oil.

You can measure the amount of oil in any way-with a syringe or any measuring dishes. But the most convenient to use are bottles with a dispenser in which STIHL oils are produced.

Important tips

In order for the chainsaw to work productively for many years, it is necessary to adhere to the following recommendations:

  • Gasoline should be fresh, not from the canister of month ago.
  • It is forbidden to use oil for 4-stroke engines. It will not completely burn out, which will lead to the formation of a carbon fiber and a quick failure of the cylinder-piston group (CPG).
  • In a 2-a-point engine, the oil should burn without residues, so it is more advisable to use “synthetics”, which is characterized by the formation of a smaller number of combustion and smoke residues.
  • When breeding the mixture, it is better to add more than the recommended volume of oil, but within reasonable limits. 5 grams of excess for 1 liter of gasoline will not lead to a hair clipping. A larger number can cause the formation of soot and breakdown of the CPG. If you pour 5 grams less than the specified, this is fraught with overheating piston and cylinder.
  • Do not use the prepared mixture of monthly ago.
  • It is forbidden to use oils for mopeds. They are not intended for chainsaws, as they are designed for smaller speeds.
  • After the season, the mixture must be fully consumed or drained to avoid loss of gasoline properties, as well as wear of the seals.

The STIHL ms 180 chainsaw is used to prepare the stock of firewood in private houses and small farms, ennoble the garden plot, bronching shrubs, with its help you can clear the site and perform a variety of work of various difficulty levels, including the roll of trees and sawed wood. This is a truly multifunctional device. In addition, you can apply different nozzles for repair and construction work.

List of the best

And now, in fact, let’s get acquainted with the most optimal both in terms of quality and price category with oils that are widely used for the ribbon of the manufacturer Calm. And we will directly give them a small description, so:

gasoline, refuel, stihl, chainsaw

This kind of oil is widely used directly for small.Sized four.Stroke engines. It can be used regardless of the time of year, but it must be remembered that the air temperature should not be lower than.15 ° C. Such oil is sold directly in bottles with a capacity of 0.6 liters and costs within 360 rubles.

This oil can be bought in a bottle that is one hundred milliliters for only 90 rubles. It needs to be added directly to gasoline. The ratio of their quantity should not exceed 1:50, that is, 20 g. Oil and one liter of gasoline.

Over, this kind of lubricant was developed specifically for the technique of the manufacturer. Its main component is minerals. But it can also be used in other models of other manufacturers. The main thing is that these chainsaws have a two.Stroke engine.

The mass of the container in which the oil is sold is equal to one liter. It is intended directly for the ribs on the rosop, but is also perfectly used for tools of other manufacturers. Diluted directly with gasoline 1:50. And the basis of this oil is minerals. You will cost you this kind of assistant within 500 rubles.

Sold in a bottle, the capacity of which is one liter and which has a direct dispenser for three and five liters. Diluted with gasoline in a direct ratio equal to 1:50. Making oil specially for two.Stroke engineer engines of the manufacturer Calm. It was also made on the basis of mineral additives. It is also widely used for models of tools of other manufacturers. The main thing is that these chainsaws have two.Stroke engines. It costs 600 rubles.

Is it possible to pour STIHL HP Ultra oil for two.Stroke engines 100ml

This kind of oil can be purchased in a bottle with a capacity of one hundred milliliters. It needs to be added directly to gasoline in a ratio of equal 1:50. Manufactured directly for the ribbon of the manufacturer Shtil.

It is a full synthetic oil, which directly has a high level of lubricant advantages. It can also be used directly for other models of chainsaws that have two.Stroke engines. Costs this kind of oil within 120 rubles.

Motor oil for a Shtihl saw for two.Stroke engines 5l

Sold directly in the canister, which has a volume of five liters. Designed for dilution with gasoline in a ratio of 1:50. Rospites with mineral additives and was created specifically for two.Stroke chainsaw engines. It is also widely used for lubrication of chainsaw engines of other manufacturers. The price category is 1,500 rubles.

STIHL HP Ultra chainsaw for two.Stroke engines 1l. With a dispenser

Oil is sold directly in a bottle, which has a peculiar dispenser for three and five liters. Designed to dilute with gasoline, the ratio of the number of these additives should not exceed 1:50.

How to use STIHL oil to lubricate the chain 1l

Sold in a bottle a container, which is one liter. It is an oil, on a synthetic basis, and which has a high level of lubricating characteristics. Over, with the help of this kind of oil, you can fully prevent the direct sample of the chain during its long operation (see. How to sharpen a chain). The price category is 215 rubles.

What gasoline and oil is better to choose for refueling the chainsaw of a calm: we disclose the question

Gasoline, as well as oil and chain oils, play one of the key roles for stable tools. The durability of the main working mechanisms of the saw depends on their quality and properties, therefore, the choice of fuel and lubricants should be treated with special responsibility. Regular use of high.Quality lubricants and fuel is the main key to the long.Term operation of the chainsaw without its unforeseen breakdowns.

Features of the device of the chainsaw

Figure 1. Scheme of the chainsaw device

The chain is a chain manual tool, whose cutting organ is driven by a carburetor engine.

As a rule, this is a single.Cylinder two.Stroke motor.

This design is simple, economical, capable of working in any position.

The structure of the saw, in addition to the engine, includes:

  • Carburetor;
  • Tire;
  • Cutting organ (chain);
  • Starter;
  • Clipper Clutch of centrifugal type;
  • Ignition, fuel supply system, air filters;
  • Chain lubrication system;
  • Muffler;
  • Handles.

The engine can be located vertically (powerful professional models of large weight) or horizontally (light household tools). Heavy saws are used for rolling and cutting out trunks, they have a large size of the frame. Light saws are used for cutting branches or sawing firewood, they usually acquire owners of private houses, farmers, gardeners, etc.P.

The design of the tool is simple, which is a guarantee of high strength and reliability. The engine shaft through the clutch coupling sets in motion a leading star that moves the chain along the tire using a leading star. The two.Stroke engine does not need the distribution val, the valve system and other elements, which also helps to increase the reliability of the structure.

The centrifugal clutch is equipped with two frictions, which are pressed to each other at low speeds of the shaft, and when the rotation speed is increased under the influence of centrifugal force, they are pressed to the outer part of the coupling and set in motion the leading star. The engine power determines the type of circuit. The more powerful the saw, the greater the chain step (the distance between the teeth, which determines the performance of the tool).

How much gasoline is stored

During long.Term storage, gasoline evaporates (regardless of the brand), a precipitate falls at the bottom, it loses its properties, in other words. It spoils. It is worth knowing that not so much gasoline itself is ignited as its pairs. Therefore, if in the garage there is a canister with gasoline since last year, then think about whether it is worth? Better leave it to the rod of a barbecue bonfire.

The use of “stuck” gasoline for a chainsaw entails many problems:

It is worth remembering that the prepared fuel mixture (gasoline with oil) is stored for no more than a month, after this time it should be disposed of. The use of the old mixture increases the wear of the parts of the chainsaw engine. Do not forget about it!

Option of alternative fuel

For refueling household and professional chainsaws, it is recommended to use non-alcohol components and additional additives-car gasoline type AI-92.

The question of whether it is possible to pour 95 gasoline into a chainsaw to date remains controversial. Theoretically, the AI-95 gasoline is higher than that of the standard AI-92 fuel, but in practice it is better to give preference to the second option.

The problem is that in order to increase anti-depth characteristics, additives and sales are introduced by manufacturers and sales, the quality and efficiency of which in specialists causes reasonable doubts.

Such fuel does not fully meet the required characteristics, does not have proper stability during long.Term storage. After 3-4 months of exposure, its working properties worsen by 25-30%.

gasoline, refuel, stihl, chainsaw

The ratio of oil and gasoline for the chainsaw

Each company engaged in the production of chainsaws sets up engines and basic carburetors to work with different lubrication. Therefore, the proportion of oil and gasoline for the chainsaw may vary slightly.

Most often, when mixing fuel with butter, manufacturers advise using 1:50 proportions, or 1:40. This means that 1 part of motor lubrication must be mixed in 50 or 40 parts of fuel, respectively.

Translating the proportion into a more affordable wording is quite simple. For example, 1 liter of fuel contains 1000 ml. If 1000 ml divide by 40, then it turns out 25 ml. This means that 1 liter of gasoline will need to dilute 25 ml of grease. The same formula must be used when the manufacturer recommends preparing the fuel mixture exclusively in a ratio of 1:50. To do this, 1000 ml must be divided into 50, as a result of which it turns out 20 ml. This means that in one liter of fuel, 20 ml of motor lubrication should be diluted.

It’s a little different about Chinese chainsaws. Their manufacturers advise breeding gasoline for a chainsaw in a ratio of 1:25. This means that owners of Chinese instrument need to stir in 1 liter of pure gasoline exactly 40 ml of lubricant. This ratio is due to the fact that these chainsaws are slightly inferior to their Western counterparts in terms of assembly and selecting components. In the engines of American, European and Japanese models, the distance between cylinders and pistons is much less than that of chainsaws from China. In this regard, the amount of lubrication required to work the first. Far less.

Important tips

In order for the chainsaw to work productively for many years, it is necessary to adhere to the following recommendations:

  • Gasoline should be fresh, not from the canister of month ago.
  • It is forbidden to use oil for 4-stroke engines. It will not completely burn out, which will lead to the formation of a carbon fiber and a quick failure of the cylinder-piston group (CPG).
  • In a 2-a-point engine, the oil should burn without residues, so it is more advisable to use “synthetics”, which is characterized by the formation of a smaller number of combustion and smoke residues.
  • When breeding the mixture, it is better to add more than the recommended volume of oil, but within reasonable limits. 5 grams of excess for 1 liter of gasoline will not lead to a hair clipping. A larger number can cause the formation of soot and breakdown of the CPG. If you pour 5 grams less than the specified, this is fraught with overheating piston and cylinder.
  • Do not use the prepared mixture of monthly ago.
  • It is forbidden to use oils for mopeds. They are not intended for chainsaws, as they are designed for smaller speeds.
  • After the season, the mixture must be fully consumed or drained to avoid loss of gasoline properties, as well as wear of the seals.

Features of the preparation of the mixture

For safety precautions, it is recommended to prepare the fuel mixture in a metal canister that is not subject to the formation of static electricity.

  • Recommended proportions of gasoline and oil for each model are individual. In most options, this is a ratio of 50: 1 and 40: 1. Less often there are chainsaws that work on a gasoline mixture in a ratio of 25: 1.
  • According to the manufacturers of branded chainsaw equipment, their products do not need to run. Nevertheless, during the first hours of work, experts advise to operate a new chainsaw on the fuel mixture with a high oil content and, if possible, in sparing mode.

For the preparation of the working mixture, containers with built.In dispensers are convenient. The selectivity of fuel filters on gas stations, in some cases leaves much to be desired, so it is recommended to filter gasoline through suede or not a fiber.

The implementation of these recommendations will relieve spontaneous failures of technology related to the violation of the carburetor.

The specific characteristics of mineral or organic chain oil are focused on lubricant and cooling of the saw headset, therefore, for the preparation of the fuel mixture are not suitable.

Recommended sequence

In accordance with the standard fuel mixture preparation technology, the calculated amount of oil is poured into the tank filled up to half.

The mixture with a closed plug is thoroughly mixed, after which the remainder of gasoline is poured. This sequence contributes to the uniformity of the resulting composition.

It is advisable to prepare a fuel for a chainsaw in an amount sufficient to perform disposable work. The finished composition at a standard temperature of 20 ° C can be stored for no more than one month. At a higher temperature, the shelf life is reduced to 2 weeks.

The expired mixture initiates the formation of tarry compounds contributing to the clogging of the jackets, the formation of soot and the limitation of the mobility of the piston rings. In order to save, the overexposed composition can be spent, adding to a fresh mixture up to 15-20 % of the total volume.

How to refuel a chainsaw and what gasoline to pour: refueling the brand Shtil, which partner works better, Huskvarnna, use

The engine of a modern chainsaw is one- or two-cylinder carburetor engine. As a rule, two.Stroke models are installed, although four.Stroke. The speed of rotation of the working shaft reaches 13.5 thousand. Revolutions, which puts forward strict requirements for the quality and composition of the fuel mixture.

Manufacturers inform users in sufficient detail how to refuel a chainsaw, but for many this question remains not entirely clear. Consider it more attentively.

Features of the device of the chainsaw

The chain is a chain manual tool, whose cutting organ is driven by a carburetor engine.

As a rule, this is a single.Cylinder two.Stroke motor.

This design is simple, economical, capable of working in any position.

The structure of the saw, in addition to the engine, includes:

To make fuel mixture huyosen chainsaw

  • Carburetor;
  • Tire;
  • Cutting organ (chain);
  • Starter;
  • Clipper Clutch of centrifugal type;
  • Ignition, fuel supply system, air filters;
  • Chain lubrication system;
  • Muffler;
  • Handles.

The engine can be located vertically (powerful professional models of large weight) or horizontally (light household tools). Heavy saws are used for rolling and cutting out trunks, they have a large size of the frame. Light saws are used for cutting branches or sawing firewood, they usually acquire owners of private houses, farmers, gardeners, etc.P.

The design of the tool is simple, which is a guarantee of high strength and reliability. The engine shaft through the clutch coupling sets in motion a leading star that moves the chain along the tire using a leading star. The two.Stroke engine does not need the distribution val, the valve system and other elements, which also helps to increase the reliability of the structure.

The centrifugal clutch is equipped with two frictions, which are pressed to each other at low speeds of the shaft, and when the rotation speed is increased under the influence of centrifugal force, they are pressed to the outer part of the coupling and set in motion the leading star. The engine power determines the type of circuit. The more powerful the saw, the greater the chain step (the distance between the teeth, which determines the performance of the tool).

Important! Using a chain incompatible with the engine leads to a loss of tool performance.

What fuel to use for chainsaw?

The choice of suitable fuel is an important and significant issue. The only correct approach to its solution is a careful study of the user’s instructions, which indicates the type and brand of fuel, the proportions of mixing gasoline and oil, and also reflects all the features of this tool. Modern standards require the use of high.Octane purified fuel and special types of motor oil.

How much gasoline is consumed by a chainsaw

Professional model with good engine power (up to 7-10 liters.With.) spend up to 3.5 liters per hour as usual. The same indicator for low-power units (3-5 liters.With.) much less and is from 0.5 to 1.5 liters per hour.

It is recommended not to pour fuel in the fuel chainsaw immediately for the entire volume available in the tank. This must be done portioned.

Can You Use E10 Unleaded Fuel In Your STIHL Chainsaws And Small Engines?

New models of chainsaws are very sensitive to the quality of the fuel used. It is important to understand that the use of proper and qualitatively mixtures has a serious impact on the life of.

How to refuel a STIHL chainsaw

An inexperienced person does not know how to dilute gasoline with butter, how to choose the right fuel, what proportion of gasoline, and many other nuances. Often, such ignorance leads to the emergence of a large number of problems in the operation of the equipment:

  • Increase in fuel consumption;
  • Defects of the unit and its components;
  • The appearance of extraneous noise;
  • Strong toxic exhaust and t.D.

Therefore, experts recommend adhere to tips related to all aspects of the equipment, starting from how to choose the right fuel, ending with how to dilute gasoline for the chainsaw.

What gasoline should be poured into a chainsaw

What gasoline should be poured into a chainsaw

Hello! Glad to see you, dear readers and subscribers of the blog Andrei Noac. Everyone who has a chainsaw, he already knows exactly what gasoline is and how to fill it. But for someone who wants to purchase such an unit, the article will seem interesting.

Chainsaw. One of the most convenient and universal household appliances. Before use, you need to prepare the fuel mixture. But in order for the device to work correctly, it is necessary to follow all the recommendations of the manufacturer. Each model is individual, and what gasoline is poured into a chainsaw?

Under the stamps

For modern brands, for example, Husqvarna, Partner, Makita, Echo, Calm AI-92 gasoline are suitable. Today, a huge number of people complain about the premature refusal of a chainsaw due to poor gasoline. Therefore, some experts recommend that the AI-95 chainsaw join such chainsaws. At the same time, a good AI-95 can “burn the piston”, and again a number of people found a compromise and mixed AI-95 with AI-92. In general, it all depends on the quality of gasoline and, ultimately, you decide.

For domestic devices, the Urals, friendship, it is recommended to take gasoline AI-80. It is very important that fuel consumption is minimal.

Make a mixture: important proportions

With pure fuel, it is purchased separately and mixed with oil, often in 1:50 proportions. In such a engine, it is constructively impossible to install an oil pump, so it is strictly forbidden to fill gasoline into a chainsaw! Proportions, quantity and some brands indicated by the manufacturer in the operating instructions.

  • Internal chainsaws work with M8-B, M-12 TPU, M8-B, TP, MHD-14M oil. In some cases, you can use external options;
  • Proportions: 2.5 liters of FI-80 gasoline per 100 g of oil;
  • Foreign models are characterized by a minimum fuel consumption. They work for other people’s oils, and their proportions become 1:40 or 1:50.

Fuel mixture

To properly prepare fuel, you will need a list of additional tools:

  • Plastic or metal container for breeding a substance;
  • Measuring bottle for gasoline;
  • Spray;
  • Syringe;
  • Watering for filling the chainsaw.

Some manufacturers, such as STIHL, immediately produce measuring containers for a more convenient measurement of the fuel mixture.

Various manufacturers produce oils of different shades. HP manufacturer produces red liquid. Green oil is a premium segment of “synthetic”. For you need to take the appropriate oil. It differs in high cost, good quality and has green or blue.

STIHL what gasoline is used 92 or 95?

We will talk about petrol. Which is better flood.AI 92 or AI 95.

What gasoline is pour 92 or 95

3-part of the course. What need know about chainsaws before using them. Join us in social networks.

The main thing. Correctly calculate the proportions of the mixture. Excess oil can form carbon deposits on pistons and candles. Excess gas can cause damage to the engine or clogging the pistons. Each manufacturer gives its proportions to models of various capacities.

For mixing components, additional accessories are needed. You will also find special canists with two openings for oil and gasoline on sale. Everything is very simple here, we pour the ingredients, tightly tighten the lid and mix, tilting the container. You can use glass and plastic bottles.

Do not allow water or dust in Fuel mixture.

Good to know

Fuel should be prepared by counting on 3 gas stations. After storing a large amount of fuel, it can negatively affect the work of the chainsaw. The mixture can behave differently because it will influence many factors. As a result, your household can get a serious breakdown that will entail financial costs.

Sometimes even power can affect the quality of the liquid. Plastic and glass react with gasoline, which can create a risk of sudden ignition.

The finished liquid cannot be stored for more than a month, since the process of oxidation occurs. After working with a chainsaw, you need to use the remaining fuel, turn off the engine and remove the remaining fuel mixture.

Fuel consumption

One of the most important issues that arises for the owners of the tool, because everyone wants to know what to expect.

The volume of almost all containers is about 500 ml. If the power of the chainsaw is 2 kW, fuel consumption will be approximately 1.2 liters per hour of work. If you speak simply, then such a tool will be able to work at maximum speed for half an hour without a break. If the chainsaw is not so strong, then the volume of the tank will be smaller. Thus, the user can independently control the fuel consumption.

Over time, the user will study without any help to maintain his tool. The main task will be to maintain an economic unit in good working condition using high.Quality fuel mixtures. Follow the safety rules for the preparation of combustible fluid. This will help save the tool, and also do not harm yourself and the environment.

Helpful hints:

The correct operation of your equipment depends on you.

First, do not neglect the suppliers or, in extreme cases, oil packaging instructions. This will help to avoid unpleasant situations. The neighbor does not always know how best to do it. The cheapness of oil and gasoline is not an indicator of high quality, because the destruction of the tool can cost much more (about 80% of the cost of the chainsaw) than fuel saved on the fuel mixture.

In the subject

Andrei LOC was with you, until new blog meetings!

How much gasoline is stored

During long.Term storage, gasoline evaporates (regardless of the brand), a precipitate falls at the bottom, it loses its properties, in other words. It spoils. It is worth knowing that not so much gasoline itself is ignited as its pairs. Therefore, if in the garage there is a canister with gasoline since last year, then think about whether it is worth? Better leave it to the rod of a barbecue bonfire.

The use of “stuck” gasoline for a chainsaw entails many problems:

It is worth remembering that the prepared fuel mixture (gasoline with oil) is stored for no more than a month, after this time it should be disposed of. The use of the old mixture increases the wear of the parts of the chainsaw engine. Do not forget about it!

Refueling safety precautions:

Depending on the construction of the chainsaw, the gas processing process may vary.

Using a special device:

Find a flat and clean surface for refueling. Put the tool with pouring holes up.

Wipe the chainsaw thoroughly with a clean rag.

Remove the fuel tank, as well as a tank with sawing chains using a combined or wrench.

Cautiously start the gas station. Make sure that the mixture does not spray. Fill the tank with fuel and oil tank. Filling can be controlled on transparent walls of tanks.

Tightly tighten the tan lids to exclude their arbitrary opening. Carefully monitor the tightness of the system. When the fuel leaks, do not start the engine T.To. This may pose a threat to your life.

In all other cases, observe the following sequence for refueling the STIHL chainsaw:

Select a flat and clean surface for the necessary manipulations.

Clean the area of ​​the pouring holes from possible contaminants.

Take the latch up and turn the tank cover until the clock is counterclockwise to remove it.

Carefully refuel the fuel tank and the tank for oil.

Take the lids until it stops and close the latches. When the fuel is leaked, do not start the engine T.To. It is dangerous.

What gasoline to pour into the STIHL chainsaw

Low.Quality fuel can cause your tool to fail. UNETILED gasoline is usually used to refuel the STIHL chainsaws, where the number of additives without lead content exceeds 90. For this, AI fuel is completely suitable. 92. AI. 95 is also used, which is used much less often. It is made on the basis of AI. 92, but contains various additives that are deposited on the internal elements of the engine and can disrupt the operation of the mechanism. At the same time, the mixing of both combustibles is permissible to achieve the optimal result.

It should be remembered that gasoline is recommended to use fresh t.To. With prolonged storage in closed containers, useful octane properties are lost.

Calculation of fuel mixture proportions

Correct refueling also implies strict observance of proportions. For a two.Stroke engine, 1 part of the oil for 50 parts of gasoline is used. To comply with this ratio, you will need 5 liters of gasoline and 0.10 l of oil. It should also be remembered that the oil pump cannot be installed in such chainsales, and therefore the use of pure gasoline is completely unacceptable.

In the event that substances for the mixture have different brands, then it is recommended to use 1:40 proportion.

Chapter 7: Fueling Your STIHL Chainsaw

When a new chainsaw in the first 3 refueling, the oil is added 20 % more. In this case, instead of a 1:50 ratio, 1:42 will be used, and 1:40 is replaced by 1:33.

Violation of the ratio of fuel substances can lead to the formation of bully, as well as to the appearance of soot on candles and pistons.

Which octane number to use. 92, 95 or 98?

Here the most interesting begins. Is it possible to refuel a chainsaw 95 with gasoline? In all the instructions for the operation of the chainsaws, manufacturers indicate with fat font: “Do not use gasoline with an octane number above 92 for the preparation of the fuel mixture”. It is understandable, but apparently not everyone, t.To. Once from timely, a chainsaws with a burnt cylinder bring to service centers!

Let’s figure out which gasoline is to pour in the chainsaw and which! For all two.Stroke engines, you need to use 92 gasoline, it is the tool that is designed for it.

Pouring 95 gasoline, detonation (impetus of the piston into the anti-income) will begin to occur in the engine, something like a micro-impact that will occur almost at each turnover of the crankshaft. I think everything is clear about 98 gasoline, the effect will be even stronger, and it will already be mini strikes.

Useful tips:

The correct operation of your technique is fully dependent on you. First, do not disdain manufacturers with indicators or, in extreme cases, with indications on the oil packaging. This will help to avoid unpleasant situations. The neighbor does not always know how best to do. Cheapness of oil and gasoline is not an indicator of high quality, because a tool breakdown can do much more expensive (about 80 % of the cost of a chainsaw) than the agricultural mixture saved on the fuel mixture.

STIHL ms 180 gas station consumption

In the middle of additional functionality, automatic lubrication of the chain, blocking the power button, in addition, the presence of a lubrication tank, the capacity of which is 0.26 liters are distinguished. When choosing a chainsaw, it is certainly worth studying additional functions, and specifically: a compensator, a chain lubrication system, also an anti.Vibration system. Similar additions are in the described model.

MS 180 chainsaw has a carburetor, which is set up in a production step. As users note, this excludes the possibility of excessive interference in the work of not familiar tools. The master can only face the need for repeated maintenance. Specialists recommend cleaning the air filter during operation during the operation, this also applies. As home craftsmen emphasize, the chain should not spin at idle. This functionality is regulated using the LD screw.

MS 180 chain chain, which involves compliance with the operating rules. Such a macar, with long breaks in the work, this part of the tool will become unusable. Users say that it is an option to exclude this possibility by storing a chain in an oil bath. For this type of saw, the manufacturer advises using a chain, the characteristics in which it is required is 3/8 ″ by 1.3 mm. Experienced users emphasize that the operation of the tool with a chain of subsequent sizes is acceptable: 12, 14 and 16 ″.

If you set a goal, you did not have to get spare parts for the Calm 180 chainsaw, you need to use the tool with the greatest accuracy, following the annotation represented by the manufacturer. The above-mentioned equipment option has a 14-inch tire and more low price. The manufacturer advises using this equipment for construction using lumber, and in addition for harvesting firewood.

STIHL MS 180 How to configure the carburetor How to Adjust Carburetor STIHL Chainsaw MS 180

This equipment refers to the household class, the manufacturer shows the purpose of the tool that should be used in the circumstances of the garden. The power of the unit is 1,500 watts, the working volume is equivalent to 31.8 cm cube. The chain contains 50 links, and the thickness and step of the chain is 1.3 mm and 3/8 “, respectively. The warranty extends to the products throughout the year after the acquisition, and the weight of the tool is 5.7 kilograms. You can use this equipment for cutting small trees, bushes, thinning groves, also a frisky workpiece of firewood. Homemade masters effectively use units to carry out other types of work. Snutri installed a two.Stroke internal combustion engine, the manufacturer supplied the equipment by the Intelligitsarb carburetor, which was provided by the compensator.

Spare parts for the Shtil-180 chainsaw, you will not even have to receive, because the tool will not affect the tool, because it is intended for domestic use. Users note that the unit is easy to use. The fuel tank is made of translucent plastic, and is additionally different. This greatly simplifies control over the level of fuel snuts. For the safety of the master, the presence of an inertial brake of the quapi is foreseen. If you have a desire to reduce fatigue during the work, then it is worth choosing such a tool, because it has an anti.Vibration system.

The assembly of the Shtil-180 chainsaw is done in accordance with the latest technologies, which ultimately allows you to get a quality tool. As users say, it is comfortable using it for sawing at least any tree. Keep the tool very comfortable, it starts easily. In the middle of the main disadvantages, users note a fairly fast fuel consumption, in addition, the wear of some parts made of plastic. But this defect cannot be called critical, because the unit is intended for personal use, which does not imply unnecessary loads. Our client remains users who received this equipment for more than one month back, note that during this period they managed to process about 4 cubic meters of the latest wood breed, in the middle of which pine, birch and aspen are engaged in. The saw when performing the tasks indicates excellent results, and the equipment can be used in the order.

How to adjust the carburetor of the chainsaw. Chainsaw service. Part 11

“Calm”. MS 180 chainsaws, the cost can be 15,000 rubles, should be used very carefully. Inexperienced masters are tasks at the first launch. If you are used to working with the help of Russian brands “Friendship” and “Ural”, then by inexperience you can simply fill in the candle. Such an effect occurs if the starter is excessive as a number of times. If you are faced with the purpose that the Shtil-180 chainsaw is not started, then if you figure it out, you will understand that the tool from a cool state will be started without effort. For this purpose, you will need to transfer the lever to the last position, after twice pull the starter slowly. Then pull it a couple of times rapidly, and subsequently saw it will definitely start. No need to leave gasoline in the tank if you do not plan to work with an inventory for a certain number of days. It is recommended to develop a tank one hundred percent. Specialists recommend choosing such equipment to those users who want to become owners of not very expensive, alas, reliable and high.Quality equipment.

In order to find an answer to the question of what is really, why the “Shtil-180” chainsaw may not be started, you need to use the above tips.

On the market there is a trace of the chainsaw of this manufacturer. STIHL MS 180-16. It is equipped with a bus, the size of which is required is 16 inches. Therefore, in the assembled state, the tool has more impressive sizes, and you can use it for rolls of trees, the size of which is achieved 30 cm across.

Before purchasing, you need to ask what quality the Carburetor of the Shtil-180 chainsaw has, because it is specifically for this reason that the tools of tools depend on almost everything. This is the only way to have no doubt about the acquisition of a high.Quality tool that will last for a long time, and in addition, it will regularly do the tasks of our client.