What oil do you need for a saw

What is it for?

Many saw owners are wondering why this tool needs oil. The answer is simple. this tool is used as a lubricant for the chain in order to neutralize the impressive force of friction between individual parts. Due to the presence of oil, important elements of the device do not suffer from excessive heat, in contact with each other.

Sometimes there are cases in which additional efforts have to be made to cut. This fact signals an insufficient amount of lubricant or its questionable quality. In such a situation, experts advise to look at the oil level in the unit reservoir as soon as possible. You can immediately further lubricate the chain to complete the work already started.

With good oil applied on time, the saw will not only run more efficiently and lighter, but also last longer. Equipment deprived of such maintenance is subject to very serious breakdowns. It is unlikely to last long.

There are several options for chain saw oil on the market today. These formulations can be mineral, synthetic, or semi-synthetic based. It should be borne in mind that the latter contain both synthetic and mineral components. Another category of modern chain oils for electric saws from different companies is represented by products based on raw materials of plant origin. Of course, each group of oils has its own advantages and disadvantages.

If we consider the properties of all oils from the point of view of stability and the ability to act effectively in rather difficult conditions, then, of course, synthetic products come out on top. They are capable of operating electric saws even in very cold weather (up to 40 degrees). However, these types of oils have one important drawback that must be taken into account. they are expensive. This is why many consumers are abandoning their purchase in favor of more affordable options.

As for the popular mineral oils, they are much cheaper than the synthetic ones. However, their performance characteristics are very inferior to the characteristics of the above compositions.

The lion’s share of mineral oils at a temperature of 25 degrees simply ceases to flow to the area where destructive friction of the saw parts occurs, that is, it ceases to perform its main function. Such oil should not be used in the cold winter period. in the cold it will be ineffective or even completely useless.

Semi-synthetic oils are a cross between synthetic and mineral products. These types of oils are produced for both electric and gasoline devices.

Why doesn’t it go to the chain?

Many owners of electric chain saws are faced with the fact that at some point the oil is no longer supplied to the required component of the tool. It is worth considering that such a problem can ultimately lead to more serious troubles.

This can be due to several factors.

• If you notice that the oil is not going to the tool chain, this may indicate that the oil pump and its gears may have failed. It is advisable to notice such breakdowns on time.
• This may also happen due to a serious blockage of the passages in the oil filter, through which the lubricant passes to the device chain.
• Also, this trouble often arises due to clogged holes in the tire.
• If the oil container is depressurized, then the indicated problem will happen inevitably.

As you can see, there can be many reasons for the lack of oil supply to the required saw units. Of course, in most cases you can figure it out on your own, but it is better not to waste time and not conduct experiments, but seek help from specialists with rich experience in such matters.

How to choose?

If you want your saw to serve for a long time and not give you any trouble, then you should choose high-quality oil for it. This issue should be approached very seriously, because the state and performance of not the cheapest tool will depend on your choice.

There are several basic criteria to consider when choosing a lubricant.

• As stated above, engine or transmission oil may only be used if permitted by the tool manufacturer. Open the instructions. there should be a point about the permissibility of using such oils. Also, do not use only mineral formulations. Engine oil can not only lubricate the chain, but also clean various systems in the device.

• It is advisable to buy a specialized lubricant for electric saws from different companies. On sale you can find many options for such compositions. Often, both saws and oils for them are made by one manufacturer. It is worth purchasing formulations with good adhesion properties. These oils will not slip off the chain while the saw is in use. In addition, the composition must be branded.

Handicraft and too cheap oils should not be trusted, they can only harm the tool.

• Some people turn to used engine oil when caring for a saw. It is important to know that such a composition is extremely contaminated. Therefore, it can heavily pollute the entire system, and with it the circuit itself.

Many users claim that their electric saw continues to function normally with this lubrication, but experienced professionals strongly advise against using waste oils.

Husqvarna

The name of this world famous brand inspires trust. Saw oil from Husqvarna is the most cost effective and economical solution for lubricating electric saw mechanisms. These products are characterized by moderate consumption and high efficiency.

Choosing and using saw oil

Electric saw oil is perhaps the most important and necessary consumable. It is he who has a positive effect on the operation of the instrument. Good oil greatly simplifies the operation of this device. With it, the cutting blade is in better contact with materials with different structures. In addition, thanks to this consumable, the tool can last much longer.

Let’s figure out how to choose the right oil for your electric saw.

Sunth plus

This equally popular oil is made on the basis of synthetic components. It easily endures rather serious equipment loads.

It can be used in already more severe conditions. the ambient temperature can reach up to 25 degrees.

Because of this, the oil will not stop acting and flow to the desired nodes.

Bio Plus

The company’s products called Bio Plus are plant-based. Oils of this company, when penetrating into the soil, very soon begin to decompose. Not every oil can boast of such a distinction. It is permissible to use this product at temperatures up to 15 degrees, like the previous version.

How to choose?

If you want your saw to serve for a long time and not give you any trouble, then you should choose high-quality oil for it. This issue should be approached very seriously, because the condition and performance of not the cheapest tool will depend on your choice.

There are several basic criteria to consider when choosing a lubricant.

• As mentioned above, engine or gear oil may only be used if permitted by the tool manufacturer. Open the instructions. there should be a point about the permissibility of using such oils. Also, do not use only mineral formulations. Engine oil can not only lubricate the chain, but also clean various systems in the device.

• It is advisable to buy a specialized lubricant for electric saws from different companies. On sale you can find many options for such compositions. Often, both saws and oils are made by one manufacturer. It is worth purchasing formulations with good adhesion properties. These oils will not slip off the chain while the saw is in use. In addition, the composition must be branded.

Handicraft and too cheap oils should not be trusted, they can only harm the tool.

• Some people turn to used engine oil when caring for a saw. It is important to know that such a composition is extremely contaminated. Therefore, it can heavily pollute the entire system, and with it the circuit itself.

Many users claim that their electric saw continues to function normally with this lubrication, but experienced professionals strongly advise against using waste oils.

Popular brands

As mentioned above, there are many brands of modern saw oils. Among them there are both little-known and very popular ones. If you decide to purchase high-quality and reliable saw oil, then you should familiarize yourself with the list of the most demanded models.

Bio Plus

The company’s products called Bio Plus are plant-based. Oils of this company, when penetrating into the soil, very soon begin to decompose. Not every oil can boast of such a distinction. It is permissible to use this product at temperatures up to 15 degrees, like the previous version.

Saw chain oil

If you compare a saw with a chainsaw, then the first does not require special care. The chainsaw has an engine, the device of which must be constantly lubricated, because if the lubricant runs out, there can be very sad consequences.

The saw uses oil to lubricate the chain. Without lubrication, she will have to put in more effort to get the job done. Without it, the chain will become very hot during sawing, the links will become dull. Everything can end up with the chain part together with the tire simply completely failing. Therefore, always keep an eye on the lubricant level.

Modern saw models have a built-in oil pump. But you can still find models that do not have this device. To do this, periodically you need to stop work and lower the chain into a bucket of lubricant. If this is not done, then it will be extremely difficult to work.

Electric chain saw oil is poured into a special container that has a screw cap. Experts recommend filling it to 75% of the total capacity. Many saws have a special transparent window through which you can monitor the lubricant level.

Check for traces of lubricant on the chain. If no oil is supplied to the saw chain, you need to idle the tool for about 20 seconds. Then check again.

What kind of oil for a chain saw

Electric saw oil is perhaps the most important and necessary consumable. It is he who has a positive effect on the operation of the instrument. Good oil greatly simplifies the operation of this device. With it, the cutting blade is in better contact with materials with different structures. In addition, thanks to this consumable, the tool can last much longer.

Let’s figure out how to choose the right oil for your electric saw.

Main components of the lubrication system

Typically, oil enters the saw chain lubrication system from a special reservoir, where it is periodically added. From there, it is pushed out by a powerful oil pump, doing this at regular intervals sufficient to consume the previous injection. The main task of the oil mechanism is to prevent the occurrence of such situations when the lubrication on the chain becomes insufficient, and as a result of this, severe overheating of the cutting part may occur due to sharply increased friction forces. As a result, the chain can become dull and fail. Therefore, the oil must be constantly monitored. Typically a saw lubrication system consists of the following components:

• oil tank for chain lubrication;
• special oil filter;
• oil line, which is a small rubber hose that serves to supply oil from the tank;
• an oil pump that pumps the lubricant from the tank to the cutting mechanism;
• special gear, with the help of which the power is transferred to the pump from the electric saw motor.

The tire could also be added to this list, since it has special holes for oil supply.

Champion

Champion adhesive oil is usually used for work with a fairly wide temperature range. This grease is sold in containers of 3 and 10 liters. The product is inexpensive, it is also easy to use.

What kind of chain oil should be used in Bosch, Makita and other saws

It is not a big secret for most electric saw owners that the oil used to lubricate the saw chain is one of the main consumables. However, at the same time, not everyone pays due attention to the quality of the lubricant. And it is completely in vain, since the term of its further operation will depend on how well this product will lubricate the working surface of the chain. Therefore, before pouring oil into the saw, you must pay attention to its technical characteristics.

Saw chain oil

Among all the consumables used for sawing tools, chain oil ranks first in terms of both frequency of use and importance of use. Good oil not only makes it easier to work with the device, but also extends its useful life for years.

What oil do you need for a saw

What oil to use to lubricate the saw chain

An incorrectly selected oil reduces the efficiency of the tool and increases its wear by 7-10 percent. Select saw chain oil based on the recommendations of the device manufacturer. Russian companies claim that their saws operate when lubricated with conventional, domestically produced automotive oils. In contrast to them are foreign manufacturers.

Saw chain oils

Finely tuned equipment only works with adapted oil formulations. So, some brands produce oils for a specific brand of saws, as evidenced by the inscription on the package. They provide ideal lubrication for saw chains and bars. At the same time, they have additional components in their composition.

A saw chain can be used to lubricate the saw chain, but do not pour it into a new saw, but use the oil recommended by the manufacturer.

For the lubrication of the saw chain and saw bars, oils from many manufacturers are used, the most popular are:

• UZFAM oil. for operation in all external weather conditions, protects well against wear and corrosion;
• Oleo-Mac ОМ Polar Lube oil. on a mineral base with a high viscosity, protects well against wear and corrosion;
• Oil Oleo-Mac ОМ Eco Lube. does not contain mineral oils, sulfur, has high lubricating properties, antiwear with high viscosity, oxidation resistant;
• Husqvarna Chain Oil is a proprietary oil that reduces the heating temperature of the chain and reduces wear on the chain links, teeth, and guide bar, retains its low viscosity even at very low temperatures, performs its functions even when water gets into it;
• AL-KO oil. used for chains of electric and chainsaws, retains its low viscosity even at very low temperatures, reduces the heating temperature of the chain as a result of friction;
• CHAMPION oil is a universal, adhesive, used for chain and bar lubrication, provides good lubrication, and viscous additives and special additives reduce abrasion and oxidation of the saw chain metal.

Consequences of insufficient or excess lubrication on the chain

Certain parameters must be respected for each mechanism whose operating mode is associated with lubrication based on machine oil. This applies primarily to the amount of oil required for its normal operation. Such problems can arise if there is not enough oil:

• overheating of the circuit;
• premature bluntness of cutting teeth;
• seized or broken chain;
• additional time spent on cutting;
• increased wear of the sprocket;
• tire failure.

For an electric chain saw, it is recommended to fill the oil tank in the following proportion: one full oil fill to a full gas tank, i.e. 1: 1. In some models, for example, Bosh, the lubrication system works in a fully automatic mode and if there is too much or too little oil on the chain, the saw itself begins to regulate its supply. However, if a malfunction occurs, and the oil starts literally pouring from the chain mechanism, then an excess of it can lead to the following undesirable consequences:

• increased oil consumption;
• excessive contamination of the tool body;
• wide spray of oil from the chain.

As you can see, an overabundance of lubricant does not lead to critical consequences, but its overexpenditure will certainly hit your. Considering that the cost of high-quality lubricating oil is quite high, it is better to use it sparingly.

Caution. fake!

dangerous is the use of cheap oil-chain counterfeit, which accounts for 7 to 12% of total sales. Counterfeits with varying degrees of success copy the appearance and labeling of branded products from leading manufacturers, therefore, when choosing an oil yourself, you should be especially careful.

Overview of brands from various manufacturers

There are many attractive offers on the market today from a wide variety of specialty oil manufacturers that can operate at high temperatures while still providing excellent gear lubrication performance. The most popular ones are presented in the following list.

• Forest Plus has high adhesion characteristics and can be used at ambient temperatures down to.15 ° C. Under certain conditions, the shelf life of the oil is 3 years. Sold in 1-liter and 5-liter packs.. 5 l. 1140 rubles.
• Bio Plus products are plant-based. It decomposes quickly when released into the soil. The oil can be used at temperatures down to.15 ° C. Packaging. 1 and 5 liter containers.
• Synth Plus is made on a synthetic base. Withstands increased loads and can be used at particularly low temperatures down to. 25 ° C. Packaging. 1 and 4 liter containers.. 4l. 2970 rubles.
• CHAMPION adhesive oil is formulated to withstand a wide temperature range. It is sold in 3 and 10-liter containers, which is very convenient for use in forestry.. 10 l. 2200 rubles.
• HUSQVARNA Vegoil is one of the most economical solutions for saw lubrication. According to the manufacturer, the consumption of this material is 40% less than others.

Using a special oil to lubricate the saw chain will ensure smooth operation for a long time. This will allow work to be carried out quickly, efficiently and with a high level of safety, which ultimately will lead to significant savings in repair and maintenance of the entire tool.

Saw chain oil

Among all the consumables used for sawing tools, chain oil ranks first, both in frequency of use and importance of use. Good oil not only makes it easier to work with the device, but also extends its life for years.

What oil to use to lubricate the saw chain

An incorrectly selected oil reduces the efficiency of the tool and increases its wear by 7-10 percent. The selection of oil for the saw chain should be based on the recommendations of the manufacturer of the device. Russian companies claim that their saws operate when lubricated with conventional, domestically produced automotive oils. In contrast to them are foreign manufacturers.

Saw chain oils

Finely tuned equipment only works with adapted oil formulations. So, some brands produce oils for a specific brand of saws, as evidenced by the inscription on the package. They provide ideal lubrication for saw chains and bars. At the same time, they have additional components in their composition.

A saw chain can be used to lubricate the saw chain, but do not pour it into a new saw, but use the oil recommended by the manufacturer.

For the lubrication of the saw chain and saw bars, oils from many manufacturers are used, the most popular are:

• UZFAM oil. for operation in all external weather conditions, protects well against wear and corrosion;
• Oleo-Mac OM Polar Lube oil. on a mineral base with a high viscosity, protects well against wear and corrosion;
• Oil Oleo-Mac ОМ Eco Lube. does not contain mineral oils, sulfur, has high lubricating properties, antiwear with high viscosity, oxidation resistant;
• Husqvarna Chain Oil is a proprietary oil that reduces the heating temperature of the chain and reduces wear on the chain links, teeth, and guide bar, retains its low viscosity even at very low temperatures, performs its functions even when water gets into it;
• AL-KO oil. used for chains of electric and chainsaws, retains its low viscosity even at very low temperatures, reduces the heating temperature of the chain as a result of friction;
• CHAMPION oil is a universal, adhesive, used for chain and bar lubrication, provides good lubrication, and viscous additives and special additives reduce abrasion and oxidation of the saw chain metal.

How to properly lubricate the saw chain

There are models that lubricate automatically using a special built-in system. But due to their high cost, you have to resort to other methods, the saw chain and tires are lubricated with an oiler, syringe, brush or spatula for more viscous oil.

Saw bar groove oil

Some manufacturers recommend making an oil bath for the chains during a long break in use in order to avoid their corrosion and the appearance of rust. To do this, you will need any small container, into which a layer of oil is poured onto the bottom, covering the product. To prevent the ingress of dust and debris, the container is closed with a lid or foil during the conservation period.