What Oil To Use For The Saw

Why it does NOT go to the chain?

Many owners of electric chain-type dust are faced with the fact that at some point, oil is no longer supplied to the required component of the tool. It is worth considering that such a problem may ultimately lead to more serious troubles.

This can be due to several factors.

• If you notice that the oil is not going to the tool chain, this may indicate that the oil pump and its gears may have failed. It is advisable to notice such breakdowns on time.
• This may also happen due to a serious blockage of the passages in the oil filter, through which the lubricant passes to the chain of the device.
• Also, this nuisance often occurs due to clogged holes in the tire.
• If the oil container is depressurized, then the indicated problem will happen inevitably.

What is it for?

Many saw owners ask a reasonable question, why does this tool need oil. The answer is simple. this tool is used as a lubricant for the chain, so that the levels of the impressive force of friction between the individual parts. Due to the presence of oil, important elements of the device DO NOT suffer from excessive heat, in contact with each other.

With a good and timely oil application, the saw will work Not only more efficiently and lighter, but longer. Equipment deprived of such maintenance is subject to very serious breakdowns. She will hardly serve for a long time.

There are several options for chain saw oil on the market today. These formulations can be mineral, synthetic or semi-synthetic based. It should be borne in mind that the latter contain both synthetic and mineral components. Another category of modern chain oils for electric dust from different companies is represented by products based on raw materials of vegetable origin. Of course, each group of oils has its own advantages and disadvantages.

If we consider the properties of all oils from the point of view of stability and the ability to operate effectively in rather difficult conditions, then, of course, synthetic products come out on top. They are capable of providing electric dust operation even in very cold weather (up to 40 degrees). However, these types of oils also have one important drawback, which must be taken into account. they are expensive. This is why many consumers are abandoning their purchase in favor of more affordable options.

As for the popular mineral oils, they are much cheaper than the synthetic ones. However, their performance characteristics are very inferior to those of the above compositions.

Semi-synthetic oils are a cross between synthetic and mineral products. These types of oils are produced for both electric and gasoline devices.

Bio Plus

The company’s products called Bio Plus are plant-based. Oils of this company, when penetrating into the soil, very soon begin to decompose. Not every oil can boast of such a distinction. It is permissible to use this product at temperatures up to 15 degrees, like the previous version.

Champion

Champion adhesive oil is usually used for work with a rather wide temperature range. This grease is sold in containers of 3 and 10 liters. The product is inexpensive, it is also easy to use.

Husqvarna

The name of this world famous brand inspires trust. Husqvarna Saw Oil is the most profitable and economical solution for lubricating electric saw mechanisms. These products are characterized by moderate consumption and high efficiency.

Usage tips

Choosing the right saw oil is not enough. You also need to know how to properly pour it into such a technique.

So, modern saw models are equipped with a special well-thought-out system for the automated supply of lubricant to the necessary units, where friction occurs during the operation of the tool.

If your toolkit contains such a technique, then you will NOT have to invent anything superfluous. You just need to carefully pour the selected suitable oil into a specially designated container. After that, it is worth letting the device run for just a few seconds, but without load (the saw should operate “idle”). During this operation of the technique, the lubricant will “disperse” as evenly as possible along the entire length of the chain.

Let us use brushes or a grease gun to lubricate an important tool assembly. Compositions in special aerosol-type packaging are most suitable for such purposes, they are very convenient to use.

Popular brands

As mentioned above, there are many brands of modern saw oils. Among them there are both Little-known and very popular ones. If you decide to purchase high-quality and reliable saw oil, then you should familiarize yourself with the list of the most popular models.

How to choose?

If you want your saw to serve for a long time and not give you any trouble, then you should choose high-quality oil for it. This issue should be approached very seriously, because the condition and performance of more than one cheap tool will depend on your choice.

When choosing a lubricant, several basic criteria should be taken into account.

• As mentioned above, engine or gear oil may only be used if permitted by the tool manufacturer. Open the instructions. there should be a point about the permissibility of using such oils. Also, do not use only mineral formulations. Engine oil You can not only lubricate the chain, but also clean the various systems in the device.

• It is advisable to buy a specialized electrical dust lubricant from different companies. On sale you can find many options for such compositions. Often, both saws and oils for them are made by one manufacturer. It is worth purchasing formulations with good adhesion properties. These oils will not slip off the chain when using the saw. In addition, the composition must be branded.

• Some people turn to used engine oil when caring for a saw. It is important to know that such a composition is extremely contaminated. Therefore, it can heavily contaminate the entire system, and with it the circuit itself.

Choosing and using saw oil

Electric saw oil is hardly the most important and necessary consumable. It is he who has a positive effect on the operation of the instrument. Good oil greatly simplifies the operation of this device. With it, the cutting blade better contacts materials with different structures. In addition, thanks to this consumable, the tool can last much longer.

Let’s figure out how to choose the right oil for your electric saw.

Stihl lubricant for two-stroke engines

Stihl engineers develop oils that are optimally suited to all two-stroke engines fitted to Stihl chainsaws and trimmers and beyond. The Stihl two-stroke lubricant range includes several product options:

• Stihl HP;
• Stihl HP Ultra;
• Stihl HP S

Stihl HP Ultra Review

Unlike conventional Stihl HP oil, HP Ultra is designed for high engine loads during operation and is recommended for use on professional chainsaws. This oil is synthetic. In order for consumers NOT to confuse diluted fuel, it has a green color, respectively, a ready-made mixture of gasoline with Stihl HP Ultra also has a greenish tint.

There are only two packages of this oil. This is Stihl HP Ultra 100 ml and 1 liter with dispenser.

The cost of Stihl HP Ultra is almost twice the price of Stihl HP and for this reason it is less popular in our country.

Stihl HP Ultra has a four-year shelf life.

Which Stihl oil to choose for a chainsaw

Any two-stroke chainsaw engine runs on a mixture of gasoline and oil, respectively, how long it will last depends on the quality and correct mixture of THESE components. Also in chainsaws it is necessary to Lubricate the bar and chain, and the quality of the lubricant is NOT the last factor affecting the duration of use of THESE parts of the chainsaw. In this article, we will talk about the oils that Stihl produces and recommends for use Not only on chainsaws of its own production.

HP Super

Designed for high-performance engines and four-stroke engines made using 2-MIX technology. The performance is slightly worse than that of the HP Ultra, therefore, at the moment, the HP Super is NOT supplied to the counters of authorized Stihl dealers.

Forestplus

ForestPlus Mineral Chain Oil.

Packaged in three types of containers, a liter bottle and canisters of five and twenty liters.

Forestplus has the lowest shelf life among the Stihl oils, which is only three years if stored properly.

How to distinguish fake Stihl oil

An attacker does NOT miss an opportunity to make money selling counterfeit products of a well-known brand. Stihl oil is NOT an exception. The most commonly encountered counterfeit Stihl HP because it has the highest sales volumes of all Stihl lubricants.

In order to distinguish a fake from the original, Stihl has issued a special brochure, in which it has recorded all the main differences between the original and the fake.

Also, we invite you to take a look. In which, with a specific example, it is shown how the packaging of high-quality Stihl oil should look like and how to distinguish a fake.

Stihl HP Review

Stihl HP is a chain saw lubricant formulated to meet high quality requirements and designed to lubricate internal engine parts during engine operation. It is made on a mineral basis and has good combustion performance (has a low level of emission of harmful substances during combustion).

Original Stihl HP is red and sold in Stihl branded packaging.

It comes in several packaging options, the most popular of which is a one liter bottle with a built-in dispenser. You can also find Stihl HP in a canister of five, ten and fifty-five liters.

The smallest package of Stihl HP, which is convenient to use in cases where you need to prepare only one liter of fuel mixture, is a twenty-gram plastic bottle.

Also, the company produces one hundred gram bottles of Stihl HP, which can be used to prepare five liters of fuel mixture.

Shelf life, if stored in a closed container, is 4 years.

BioPlus chain oil overview

Bioplus is plant-based, which allows it to decompose in the shortest possible time when it gets into the soil. It is this property that has been awarded the European environmental safety mark. According to the information available on the manufacturer’s website and is Official, BioPlus has been tested according to OECD 301 B.

For maximum convenience of consumers, it is packed in 4 types of containers, these are:

• Liter bottle.
• Canister with a capacity of three liters.
• Five liter canister.
• Plastic twenty liter canister for those who use a chainsaw on a daily basis and use a large amount of lubricants.

BioPlus price may vary depending on the region of sale.

BioPlus has a shelf life of four years. Brown color.

Mixing ratio

Very often people ask the question, how much oil per liter of gasoline is considered the norm. It is easy to answer it, because the instructions for any Stihl chainsaw, as well as on the additive package, indicate that when using original Stihl products, the proportion of oil and gasoline should be 1:50. This means that for one liter of fuel, it is necessary to add 20 ml of the additive.

Functions of lubrication for electrical dust circuit

The mechanisms for transmitting power from the engine to the sawing organs of the power tool consist of several elements. During operation, they succumb to increased and continuous friction. To reduce the stress on these parts, the owner of the chain tool must ensure that a suitable hydraulic fluid is available.

Saw chain oil speeds up the operation of the installed cutting attachment. In addition, the lubricant protects the metal parts of the tool from dust and moisture on their surface, which lead to corrosion and destruction of the drive mechanism.

Another important function of the fluid is to protect the chain, bar and saw drive from gum and carbon deposits. A high-quality composition maintains the integrity of the metal guide, preventing it from glowing, as well as further destruction. As a result, the cutting headset of the power tool will cut efficiently and evenly for several seasons in a row.

TOP 5 saw chain oils

Today the market is full of lubricants, which, according to their manufacturers, are capable of ensuring the smooth operation of the cutting set and its drive mechanism. But not every composition shows a truly high efficiency and effectiveness. We are talking about inexpensive fluids with a minimum of m required additives, as well as non-original oils, which are marketed under the name of well-known brands, that is, a fake.

In order not to be mistaken when choosing an oil, it is best to give preference to the following chain compounds:

• 1. Forest Plus from Stihl. The main advantages of this formulation include good adhesion as well as high workability up to 15⁰C. Observing the recommendations indicated by the German manufacturer, the service life of the composition will reach 3 years;
• 2. Bio Plus from Stihl. THESE lubricants are made from a natural vegetable base. Thanks to this, the oil decomposes in the soil and does not harm the soil. German manufacturer’s grease can be used at temperatures up to 15⁰C;
• 3. Synth Plus from Stihl. This oil successfully withstands increased loads and work at temperatures down to.25⁰C. A balanced synthetic base is used for the production of the composition;
• 4. Husqvarna Vegoil. The use of this material from a well-known Swedish manufacturer allows you to save up to 40% oil without compromising the protection of the drive and the cutting parts of the saw. The oil prevents the formation of resinous deposits and rust on the surface of the tool parts;
• 5. Champion BAR CHAIN ​​OIL. Inexpensive chain oil designed for intensive use in summer and winter. The liquid is released with high adhesion and decent anti-corrosion properties.

Regular use of any of THESE oils will ensure trouble-free operation of the saw chain and bar, regardless of the stress on the cutting attachment.

Electric Chainsaw Oils

As is the case with gasoline saws, electric powered garden chain tools need to be lubricated. Oil in this type of equipment is necessary only to ensure the operation of the cutting attachment. Without the right amount of high-quality lubricant, the tire and chain will start to wedge and fail quite quickly. To prevent this, the owner of the tool must constantly monitor the liquid level, as well as rinse the parts responsible for the headset drive in time.

What kind of oil to pour into the chain saw?

Choosing oil for chainsaws, gardening equipment owners have 2 options: a special proprietary product or ordinary machine lubricant used to maintain the operation of moving parts of equipment. It should be noted that a special lubricant is better and more efficient, since in its production, brands take into account the peculiarities of the operation of electric dust drive mechanisms, as well as the load on them during operation.

To improve its performance, brand-name electric chain saw oil always contains important additives. It is they who make high-quality brand lubricants better and more expensive than machine lubricants.

Most gardening machine operators and saw manufacturers advise the use of compounds marked “N” on the packaging for chain lubrication.

Their main benefits include:

• High degree of biodegradability;
• Special additives responsible for protecting rubbing parts from wear and heat;
• Increased adhesion.

All these qualities prolong the life of the drive and the cutting set of the tool, which significantly reduces the frequency of bar and chain replacement.

Saw chain lubrication system. design and operation

In most cases, factory-installed power saw fittings include:

• Reservoir for periodic introduction of liquid;
• Mesh filter, which cleans the liquid from foreign solid fractions;
• A short hose made of technical rubber, through a composition it flows from the tank to the moving parts of the tool;
• Oil pump. under its action, the liquid is pumped from the reservoir to the rubbing elements of the tool drive;
• Gear. through it, the force from the electric motor is transmitted to the saw oil pump.

The pump plays a key role in this unit. As soon as the engine speed rises, the built-in gear receives enough force to drive the oil pump. When operating, the pump increases the pressure inside the lubrication system. As a result, the air pushes the liquid out of the tank towards the tire. Getting into the place of contact between the saw housing and the guide, the liquid flows into the groove, which is needed to lubricate the bar. The end link of the lubrication system is the chain, in the links of which grooves or holes are also provided. Through them, the chain saw oil spreads along the entire length of the cutter.

Oil does NOT flow to the saw chain. reasons and DIY repair

Most often, the saw pump is the culprit for the lack of lubricant supply. During operation, he, like all other elements of the system, lends itself to increased loads. In addition, the pump gradually becomes clogged with debris, which passes through the strainer along with the oil. The accumulation of fine debris interferes with the normal operation of the pump and, over time, leads to serious damage to the tool.

At the same time, it is far from always a problem in which the chain is not lubricated on the saw. It is connected with the pump itself. The gear wheel, which is responsible for transferring power from the engine to the oil pump, can also fail. It can shift when hitting the saw or simply become unusable due to wear. This is easy to spot when looking at the star. If during self-diagnosis it was proved that the star is out of order, then it must be replaced.

Another reason why oil is not supplied to the saw chain is the depressurization of the system. Pressure must be built up to circulate fluid inside the assembly. If it is not there, then this indicates the formation of holes or cracks, which may appear in the walls of the oil hose, as well as in the place where it is connected to the pump or to the saw guide. In any of THESE cases, you need to carefully check the oil supply system and restore its previous tightness.

Saw chain lubrication system. design and operation

In most cases, factory-installed power saw fittings include:

• Reservoir for periodic introduction of liquid;
• Mesh filter, which cleans the liquid from foreign solid fractions;
• A short hose made of technical rubber, through a composition it flows from the tank to the moving parts of the tool;
• Oil pump. under its action, the liquid is pumped from the reservoir to the rubbing elements of the tool drive;
• Gear. through it, the force from the electric motor is transmitted to the saw oil pump.

The pump plays a key role in this unit. As soon as the engine speed rises, the built-in gear receives enough force to drive the oil pump. When operating, the pump increases the pressure inside the lubrication system. As a result, the air pushes the liquid out of the tank towards the tire. Getting into the place of contact between the saw housing and the guide, the liquid flows into the groove, which is needed to lubricate the bar. The end link of the lubrication system is the chain, in the links of which grooves or holes are also provided. Through them, the chain saw oil spreads along the entire length of the cutter.

Functions of lubrication for electrical dust circuit

The mechanisms for transmitting power from the engine to the sawing organs of the power tool consist of several elements. During operation, they succumb to increased and continuous friction. To reduce the stress on these parts, the owner of the chain tool must ensure that a suitable hydraulic fluid is available.

Saw chain oil speeds up the operation of the installed cutting attachment. In addition, the lubricant protects the metal parts of the tool from dust and moisture on their surface, which lead to corrosion and destruction of the drive mechanism.

Another important function of the fluid is to protect the chain, bar and saw drive from gum and carbon deposits. A high-quality composition maintains the integrity of the metal guide, preventing it from glowing, as well as further destruction. As a result, the cutting headset of the power tool will cut efficiently and evenly for several seasons in a row.

TOP 5 saw chain oils

Today the market is full of lubricants, which, according to their manufacturers, are capable of ensuring the smooth operation of the cutting set and its drive mechanism. But not every composition shows a truly high efficiency and effectiveness. We are talking about inexpensive fluids with a minimum of m required additives, as well as non-original oils, which are marketed under the name of well-known brands, that is, a fake.

In order not to be mistaken when choosing an oil, it is best to give preference to the following chain compounds:

• 1. Forest Plus from Stihl. The main advantages of this formulation include good adhesion as well as high workability up to 15⁰C. Observing the recommendations indicated by the German manufacturer, the service life of the composition will reach 3 years;
• 2. Bio Plus from Stihl. THESE lubricants are made from a natural vegetable base. Thanks to this, the oil decomposes in the soil and does not harm the soil. German manufacturer’s grease can be used at temperatures up to 15⁰C;
• 3. Synth Plus from Stihl. This oil successfully withstands increased loads and work at temperatures down to.25⁰C. A balanced synthetic base is used for the production of the composition;
• 4. Husqvarna Vegoil. The use of this material from a well-known Swedish manufacturer allows you to save up to 40% oil without compromising the protection of the drive and the cutting parts of the saw. The oil prevents the formation of resinous deposits and rust on the surface of the tool parts;
• 5. Champion BAR CHAIN ​​OIL. Inexpensive chain oil designed for intensive use in summer and winter. The liquid is released with high adhesion and decent anti-corrosion properties.

Regular use of any of THESE oils will ensure trouble-free operation of the saw chain and bar, regardless of the stress on the cutting attachment.

What kind of oil to pour into the chain saw?

Choosing oil for chainsaws, gardening equipment owners have 2 options: a special proprietary product or ordinary machine lubricant used to maintain the operation of moving parts of equipment. It should be noted that a special lubricant is better and more efficient, since in its production, brands take into account the peculiarities of the operation of electric dust drive mechanisms, as well as the load on them during operation.

To improve its performance, brand-name electric chain saw oil always contains important additives. It is they who make high-quality brand lubricants better and more expensive than machine lubricants.

Most gardening machine operators and saw manufacturers advise the use of compounds marked “N” on the packaging for chain lubrication.

Their main benefits include:

• High degree of biodegradability;
• Special additives responsible for protecting rubbing parts from wear and heat;
• Increased adhesion.

All these qualities prolong the life of the drive and the cutting set of the tool, which significantly reduces the frequency of bar and chain replacement.

Electric Chainsaw Oils

As is the case with gasoline saws, electric powered garden chain tools need to be lubricated. Oil in this type of equipment is necessary only to ensure the operation of the cutting attachment. Without the right amount of high-quality lubricant, the tire and chain will start to wedge and fail quite quickly. To prevent this, the owner of the tool must constantly monitor the liquid level, as well as rinse the parts responsible for the headset drive in time.

Oil does NOT flow to the saw chain. reasons and DIY repair

Most often, the saw pump is the culprit for the lack of lubricant supply. During operation, he, like all other elements of the system, lends itself to increased loads. In addition, the pump gradually becomes clogged with debris, which passes through the strainer along with the oil. The accumulation of fine debris interferes with the normal operation of the pump and, over time, leads to serious damage to the tool.

At the same time, it is far from always a problem in which the chain is not lubricated on the saw. It is connected with the pump itself. The gear wheel, which is responsible for transferring power from the engine to the oil pump, can also fail. It can shift when hitting the saw or simply become unusable due to wear. This is easy to spot when looking at the star. If during self-diagnosis it was proved that the star is out of order, then it must be replaced.

Another reason why oil is not supplied to the saw chain is the depressurization of the system. Pressure must be built up to circulate fluid inside the assembly. If it is not there, then this indicates the formation of holes or cracks, which may appear in the walls of the oil hose, as well as in the place where it is connected to the pump or to the saw guide. In any of THESE cases, you need to carefully check the oil supply system and restore its previous tightness.

Manufacturers of adhesive oils

Almost all manufacturers of chainsaws are engaged in the production of consumables for them, explaining this by the fact that these products are most suitable for use in conjunction with their saws. There is no information about how true this is, but Based on the experience of operating and repairing chainsaws, it can be noted that there are no significant differences in the service life of parts or at least visible wear.

But the fact is the fact, the manufacturers recommend and cannot be hidden. So, back to the manufacturers, and let’s start with the popular Stihl brand.

Chainsaw sprocket lubricant

To increase the service life and reduce friction on the drive sprocket, the manufacturer equips this mechanism with a needle bearing, which must be lubricated periodically. Stihl multipurpose grease can be used for lubrication.

If you DO NOT want to overpay, it is better to use an inexpensive, but no less high-quality option, Litol or Litol 24 grease. Due to its viscosity, Litol will easily replace the original.

Lubricate the sprocket of the chainsaw tire, you can use the same lubrication as the leading one, using a special syringe for this. This allows the grease to be pressed in, through the technological holes in the tire, to the sprocket bearings.

What oil to use to lubricate the chainsaw

The answer to this question is quite simple, for this you need to open the instructions for any dust and it will indicate that you need to fill in oil that has a good adhesion effect.

What is it for? The fact is that the chain moves along the tire at a high speed, and if oil with low adhesion is used as a lubricant, then most of it, by inertia, flies off the end of the tire and lubrication of its lower part does not occur. This phenomenon can be observed with a little experiment. Start the chainsaw, direct the end of the tire towards a bright surface and add maximum gas. As a result, oil stains will appear on it, which are proof of the theory.

Stihl adhesive oils

The following adhesion oils are presented on the company’s website, designed for various operating temperatures and having a good lubricating performance:

• ForestPlus adhesive oil. recommended for use at temperatures up to. 15 ° C, shelf life under storage conditions is 3 years. Supplied in 1 liter or 5 liter containers;
• Bioplus. its peculiarity is a plant base, which allows it to decompose quickly when it enters the soil. It is used at minus 15 and is supplied in three, five and one liter containers;
• The latest SynthPlus oil is characterized by its ability to maintain performance at minus 25 ° C.

HUSQVARNA oils

The company offers its customers Husqvarna Bio Advanced oil for use in normal and extreme conditions. The oil is made from plant components and is environmentally friendly, supplied in liter and five-liter containers.

As an economical solution, the company has Vegoil oil, according to the manufacturer, its consumption is reduced by 40% in comparison with others. Supplied in a liter container.

The company also produces bearing grease, which it recommends for lubricating the bearings of the drive sprocket and the sprocket on the saw bar.

Less common, but popular among chainsaw owners, are:

• Polar Lube mineral. Oleo-Mac;
• Adhesive CHAMPION, sold in containers up to 10 liters, which is convenient for use in forestry;
• Makita Biotop;
• Anchor.

You can get acquainted with some oils for chains by looking below, in it a seller of a large network of tools comments on the use of adhesive oils from various manufacturers.

Chainsaw chain oil. which one to use

You are a recent owner of a chainsaw and still DO NOT know which chain oil is best to use. The absence of THESE known, can have a detrimental effect on the tool, because the type and quality of the lubricant determines how long the tire and the tool chain will maintain their performance.

After reading this article you will fill the knowledge gap, because K. We will consider the use of oils, from various manufacturers and brands, to reduce friction between the parts of the saw headset. And also we will figure out what additional lubricants are used to service the chainsaw in order to maximize its service life.

How to replace the original expensive oil and is it worth

In situations where it is not possible to use original ones, they can be replaced with oil for car engines. Cheap automobile oils such as autol or diesel lubrication options, due to low adhesion properties, are unsuitable for long-term use.

Some owners, despite the recommendations, still use analogues, preferring to change the tire and chain more often, but here everyone decides for himself. Such oil cannot have any negative effects on the lubrication system, which means that the only difference is in the quality of the tire protection against chain friction.

A little about the lubrication of the chainsaw chain by working off

Waste oil is called oil that has served its life in an engine or gearbox of a car. Many owners of chainsaws, trying to save money, use it to lubricate the chain, which results in serious repair costs.

The reason for THESE breakdowns is the presence of metal shavings in the mining, which settles in the crankcase of the car, and at the time of draining the mining from the pallet, it merges with it.

Once on the tire, metal shavings act as an abrasive on its surface. Simply put, instead of protecting the surface, working out increases tire wear, drive sprocket, and drive sprocket bearing on the tire. Working off also affects the chainsaw chain, in those places where it bends and increases the risk of breaking the chain mechanism.

Conclusion: to lubricate the chainsaw chain, you need to use original lubricants from manufacturers. It is unacceptable to use exhaust from the car engine. In the absence of high-quality oils, a short-term replacement with clean automobile oils is allowed.

Is normal engine oil suitable for lubrication??

This question is considered one of the most common. Engine oil is often on hand, but chain lubricant is not always available. For this purpose, it is permissible to use engine and transmission formulations, but remember that you should avoid mineral oils. Mineral water is suitable only for specific dust models, which is described in detail in the technical documentation.

It is strongly not recommended to lubricate the saws with such compounds, unless the manufacturer’s permission is given. The main task of motor oils is not this, and therefore it is not worth using the product so that the tool does NOT harm.

Saw chain lubricants. which options are best

Do not think that electric dust oil is required. On the contrary, a high-quality lubricant is almost the most important and necessary substance. A good product allows you to use the saw for a longer period and provides protection against negative effects.

I have a saw at home and the main task is to protect the tool during storage. I think many people are looking for options to provide protection for the saw chain during the conservation period. In the review, I will talk about which lubricants are most suitable for applying to the saw chain and whether engine oil can be used for this purpose.

Varieties of saw lubricants

The modern lubricant market offers several options for such products. The compositions differ in the basis. synthetics, mineral water or semi-synthetics. In recent years, herbal lubricants have gained popularity. Each option has strengths and weaknesses:

• Synthetic lubricants. If we consider lubricants in terms of stability, synthetics will take the lead. The substances can keep the saw working even in very cold weather (up to 40 degrees Celsius). Among the shortcomings can be noted the High cost of the product.
• Mineral lubricants. The products of this group are quite popular, since they are several times cheaper than synthetics. On the other hand, the technical parameters are inferior to synthetic lubricants. Mineral-based oils cannot withstand temperatures as low as 25 degrees Celsius. The grease hardens and has a detrimental effect on the individual parts of the saw. For the winter period, the substance is NOT suitable.
• Semi-synthetic lubricants. An intermediate link between synthetics and mineral water. They do a good job with their functions. Have an affordable cost. The properties do NOT reach the level of synthetics.

Today it is not difficult to choose the right compound for saw lubrication. When choosing, it is worth focusing on the operating conditions of the saw and on the composition of the lubricant.

Popular brands of grease

Many manufacturers make saw lubricants. Among the current proposals there are Little-known and NOT too popular. If you need chain lubricant, then you should pay attention to the most popular formulations:

The name of the lubricating composition	general description
Forest plus	The oil is in demand. The composition has excellent adhesion. The product can be used at temperatures up to 15 degrees. Retains its properties for up to three years.
Bio Plus	Produced on a plant basis. Upon penetration into the soil, it begins to decompose. Can be used at temperatures from 15 degrees.
Sunth plus	Made on the basis of synthetics. Serious loads are easily endured. Suitable for use at temperatures up to 25 degrees.
Champion	A unique product suitable for very low temperatures. It is sold in containers of 3 and 10 liters. Differs in low cost.
Husqvarna	Popular composition. Differs in low cost. Gives good results.

You can easily select a suitable product from the presented lubricants. It is important to consider at what temperature the saw will be used in the future.

Why do you need lubricant?

Owners of such tools often mistakenly believe that chain oil is NOT required to lubricate the saw chain. The chain is subject to a serious load in the form of heating and constant friction. Obviously, such a mode of operation will very quickly render the instrument completely unusable. The problem can be solved very quickly and simply. negatively affect the chain and levels.

The components present in the lubricant protect the device element from heating by reducing friction. In total, the service life of the saw can be extended for a long time. Sometimes there are cases when extra effort is required to cut. If this happens, it means that the used lubricant is of insufficient quality or the volume of the product is insufficient.

In a situation like this, I would suggest doing two things. Check the oil level in the saw tank first. Lubricate the chain additionally before starting work. Good lubrication will make the saw work more efficiently, lighter and longer tool life. Maintenance-free equipment is subject to frequent breakdowns. She will not be able to serve the owner for a long time.

The review can be completed with the following conclusions:

• saws require compulsory maintenance. Chain lubrication should also be included in the general list of manipulations.
• The best lubricant option may be a product from the saw manufacturer. Usually such options are high cost, therefore, people do not always choose this option.
• Do NOT use engine oil as a lubricant. Working off is categorically NOT suitable. The listed options will only harm the saw.