Wheel weights for your power tiller with your own hands

Purpose of the adapter

The adapter for a power tiller in the classic form is a trailer with a seat on two wheels, fixed behind the power tiller, and to which the attached equipment is mounted. It is the adapter that makes it possible to install additional equipment as easily as possible. The adapter turns a single-axle tractor into a mini-tractor and thus makes it not only versatile, but also as comfortable as possible.

The adapter allows you to sit during the work, thereby making it easier to work. The wheel adapter also gives the power tiller more stability, making it easier and simpler to work. It is also convenient that the immediately adjusted attachment will not go too deep or, conversely, will not rise too high. The attachment can be adjusted on the adapter with a hand device. You can safely use the adapter even with light power tillers, such as the Neva and Kaskad.

The maximum comfort is achieved by using a steering adapter or a front adapter for power tillers. In this case the rudder allows you to not use the tiller to control the tiller, which is, of course, much more comfortable. Thanks to such a device you can get the perfect minitractor. multifunctional, easy to operate and with an operating speed of about five kilometers per hour.

The dimensions of such an adapter for a motor-block is usually about two meters in length, eighty centimeters in width and one and a half meters in height. Adapter with a rudder is not small in size, as it is practically the front part of the tractor. Also compatible with the Neva, the lightest power tiller on the market today.

Considering all of the above, the adapter can be called necessary for a power tiller.

How to make a single axle tractor heavier with your own hands

Eliminate slipping and increase the efficiency of light and medium tractors (such as: Neva MB-2 and MB-1, Patriot, Oka, Salyut, and others) will help install homemade weights.

To figure out how to weight a single-axle tractor correctly, you need to understand that there are three ways to achieve a specific task:

• to fasten the weights on the body of the agricultural machinery;
• make weights for wheels or tines;
• Increase the weight of the attachment (plow, dipstick, snow shovel, and others) to improve the depth.

A single-axle tractor is indispensable equipment for the gardener

a single-axle tractor is designed as a tractor, but with one axle. This is a device that is indispensable for tillage. The term single-axle tractor became more common in the 80s, earlier this technique was called a walking tractor or a single-axle tractor. It greatly facilitates the monotonous manual work of loosening the soil for planting various garden crops.

Moto-blocks are divided into wheeled and power tillers. They are distinguished by the method of aggregation. The former is activated when the wheeled undercarriage moves. The second has the wheel part replaced by a cutter.

This technique has a gasoline or diesel engine, which drives the unit, and a wheel pair For fieldwork you may need other devices, which are connected through a trailed implement on the power tiller.

FURTHER READ: What is an all-in-one printer and how it differs from a printer

The efficiency of the attachment

Any single-axle tractor can be equipped with one of two types of wheels:

But regardless of their type, the machine must be able to work the ground to a sufficient depth. When it comes to practice, however, it turns out that the weight of the power tiller itself is not enough to do a good job on the ground. The wheels can begin to slip, which is the first sign of insufficient weight of the device. From this situation there is a way out, which is very simply called: weighting gravity for power tiller Salyut.

Rating of the best weights for power tillers for 2021

In this article we will consider the criteria for choosing weights, advice and recommendations of experts, indicating what to pay attention to, so as not to make a mistake when choosing.

Weights for the wheels of power tillers Salyut, to make their own hands

These days, power tillers are indispensable helpers for people who have a fairly large area of land and have to cultivate a couple dozen acres of land all year round. Naturally, it is a long and hilarious thing to process such an area by hand, but when you have a mechanical assistant at hand, it is much more convenient and practical, and perhaps even better quality. A single axle tractor is only profitable if it can work at the proper depth. But in practice, in most cases, it turns out that the weight of the power tiller is too small to do it. In this case, the wheels start to slip. And here to help landowners come weights for power tillers Salyut.

List of tools and equipment

As a rule, on each dacha plot there is a sufficient number of metal products and a set of devices for a wide range of works.

In order to make wheel weights for a power tiller with your own hands, you will need the following tools and materials:

• tape measure;
• welder;
• building level;
• angle grinder with discs for cutting and grinding metal;
• Electric drill with a set of drills;
• a small steel or aluminum barrel with a twist-off lid;
• Pancakes from the bar weighing 5, 10, 20 kg;
• steel corner 30-50 mm;
• paint brush;
• car paint.

Make your single-axle tractor heavier so you can always quickly remove the attachments. They will not be needed when mowing grass or performing other work that does not require a firm grip on the ground. Excess weight in such cases would be a nuisance and cause overconsumption of fuel.

Making weights with your own hands

For most models, you can buy ready-made weights. They cost from 1000 to 5000 depending on weight and configuration. For example, the wheel weights for the motor-block Neva MB-2 cost from 1500 for 10 kg and about 1200 for 8 kg. Body weights will cost 1200 for 18 kg, and a set for the loaders. from 5000 for 20 kg. The money is not much by the standards of a large farm, but on a small farm, where the necessary materials and tools are available, you can make the weights yourself.

To make wheel weights for a motor-block with your own hands, you will need the following materials:

• Two ordinary sports kettlebells of 5 kg each;
• The barbell weights are 10 kg each;
• Old car clutch baskets;
• full-body hexagonal metal profile;
• Cotter pins for the power tiller.
• Cut off a piece of sheet metal about 5 cm long and drill holes in it for cotter pins.
• Attach a piece of profile to the pancake from the bar: insert into the hole from the bar and weld.
• Weld the clutch basket to the pancake, and the basket to the weight.
• Repeat for the second weight.
• Paint, let dry and mount on the rims. Secure the cotter pin with a steel wire.

This will increase the weight of the Moto-Block by 50 kg.

For body weights the frame is made first. The procedure is as follows:

• Weld box-shaped frame from angle profile and make holes for bolts.
• Weld to the gearbox casing and to the handlebar bracket with bolts with a diameter of 12 mm and a length of at least 10 cm.
• Set the frame on the frame and adjust it so that the single axle tractor standing unsupported will not tilt forwards or backwards.
• Remove the frame, paint it and install it again. Select the load and fill the frame with it.

Find the right materials at the scrap yard. Many people also have everything they need in their garage or workshop.

Other jobs

5.1. Rotary brush. This single-axle tractor-mounted attachment helps you sweep up trash or fresh snow from asphalt paths and lawns quickly and efficiently.

Roast Whole BIG SPICY PIG 100KG with Power Tiller Machine Tractor. BBQ Spicy Foods

5.2. Bulldozer blade (dozer blade) hanging attachment may only be used on heavy-duty power tillers. The blade is used to transport large volumes of loose material (piles of sand, crushed stones, snow, etc.).д.). Attaches from the front.

5.3. Screw-rotor snow blower. Used for clearing large amounts of snow, frozen or slushy ground. The steel auger crushes the snow-ice mass and throws it away at a distance of up to 20 meters.