Which disk is better to cut a laminate.

How to cut a laminate: we select a suitable cutting tool

In order to properly lay the laminate on the floor, you need to be able not only to connect laminate panels, but also to cut them correctly. Otherwise, “fit” into the area of ​​the room, as well as observe the traditional chess pattern will be impossible. Since you can’t take laminated boards with your bare hands, cutting them can be entrusted to one of the manual or electrical tools.

The main characteristics that should have a tool for cutting a laminate at home is:

which, disk, better, laminate

The last point, the meaning of which is not to spoil the type of laminate board after cutting, for most home masters is a decisive. However, its meaning is still exaggerated. In any case, chips up to 5 mm in size on the finished coating will not be noticeable. defects on the edge of the panels will be hidden behind skirting boards.

So, which tools are most suitable for cutting laminate?

Tool Electricity

The best result in the cutting of the laminate can be achieved by applying an electrician for this purpose. This is an easy, very convenient tool to use, to which any master-novice will quickly find an approach. Even a woman or a teenager. The cut with an electrician is performed at increased speeds, which avoids damage to the structure of the wood.fiber plate. If you act quickly, confidently, then the cut will turn out to be almost perfect.

The main thing in the use of an electrolobian is the choice of files. A modern tool is usually originally supplied with special files for cutting laminate. They are distinguished by a special shape, step and method of wiring teeth. However, ordinary metal files for metal will also cope with this business. narrow, with small teeth.

In order not to damage the decorative surface, the fishing line for cutting is applied (pencil or chalk) on the wrong side of the laminate board. It is laid on the table (chair) by the wrong side up so that the part that is planned to be cut is in limbo. With one hand they fix the laminate lying on the table, and the other quickly cut off the excess part.

Circular saw tool

A neat cut along the edge of the laminate can be obtained using a circular saw with a metal disk. Working with a circular saw is more difficult than with an electrician, so it requires some skills. If you have them, then you can cut the laminate quickly, exactly, almost without chips.

The laminate board is laid on the hard surface with a pattern up, fixed. You need to cut carefully, with a little pressure, moving the disk along the drawn line, trying not to slow down in one place.

Angle.grinding machine tool (angular grinder)

Corner grinder. a convenient tool indispensable in the box of a home master. You can cut almost everything, including laminate. For a beautiful edge, without cracks and chips, when cutting, you need to turn the laminate board with the front surface. At the same time, metal disks, concrete or ceramic tiles are used.

Disadvantage of using corner grinding (and circular saw too!) can be called a large amount of dust that will be released during laminate cutting. Also, this action may be accompanied by the smell of a burning tree. Therefore, you need to do a harsh on an open balcony or on the street.

Khspovka tool

Laminate can be successfully cut with a conventional hacksaw on wood. But this will have to spend strength, because its teeth are quite large and will bite into the laminate, and not to cut it. Smaller teeth in a hacksaw for metal. it must be used for sawing.

Scabbard is very often used for cutting with small volumes of work. In construction teams, this method is not applied, due to increased time costs and complexity.

Laminate cutter tool

A cut for a laminate, on the contrary, allows you to make cutting at a professional level. Most often, this tool works according to the type of guillotine. a knife, which, with the help of a handle, is lowered to the surface of the laminate and cut it. The cutter acts easily, without chips and noise. For its use, you do not need to use strength and have skills. Perhaps this is the easiest tool in operation, which allows in any conditions to get an excellent result.

Since this cutter is used exclusively for the laminate, it makes sense to buy it only with professional styling. For the decoration of several rooms of the apartment, this option is considered impractical.

Tool building knife

An ordinary building knife can also be used for laminate cutting. For example, if you almost finished the flooring device, it remains to cut one board, but suddenly a corner grinder broke. There are no other tools at hand, and the cut should be done urgently. Then a construction knife will come to the rescue. Put the ruler on the front side of the laminate board, draw a deep cut on it with a knife. Holding the board on one side of the cut, press on the second side. The laminate should be broken, just like ceramic tiles under the influence of tile cutter.

Types of tool cutting tools

By virtue of its structure, the laminate is well sawn by wood tool and is extremely simple to process for masters of different levels: from professionals with many years of experience to beginners.

A feature is that the cut of the material is carried out directly at the installation site. At the same time, it is very important to achieve a qualitatively even cut and not spoil the panel.

Turning to specialists with the question of how to cut a laminate quickly and efficiently, you can get various tips. After all, each master has its own criteria for selecting tools, their own characteristics and knowledge of technology, experience and natural ingenuity. For one it is important to work with an easy and mobile tool, for the other, the issue of connecting to a power grid or manual execution is important. However, everyone converges in one opinion: laminate cutting should be performed qualitatively, providing an ideal cut.

The entire laminate cutting tool can be divided into two categories: manual tool and power tool. The advantages of the first category are the versatility of application and affordable price. The use of the instrument of the second group, despite the higher cost and dependence on the connection location to the mains, can significantly accelerate and facilitate the process of installing the coating.

When choosing how to cut a laminate, you can count up to seven tools:

  • hacksaw;
  • electrician;
  • circular saw;
  • corner grinder;
  • special cutting;
  • construction knife;
  • and even an ordinary clerical knife.

The use of any tool from the list given with appropriate experience will allow you to get a high.quality and neat slice. A general or unified recommendation than cutting a laminate at home, which equipment or device does not exist in a particular situation. Each master, on the basis of personal practical experience, knowledge and professional training, has his own preferences and “chips”. It is important to take into account that in any of the selected methods, one should be guided by popular wisdom: “Measure seven times, cut off once”.

Consider briefly the purpose and principles of the work of each type of tool for cutting the laminate.

Hacksaw

Let’s start with the simplest and affordable. manual wood or hacksaw saw. This is a hand tool that is in almost every house. The hacksaw requires the use of physical efforts and can be used when cutting a small amount of material. On a large volume its use is not effective. At the same time, the choice of hacksaw with large teeth can lead to the destruction of the decorative surface of the coating lamellas. To prevent such consequences, it is better to use a hacksaw with small teeth or a hacksaw for metal.

Tip: Before proceeding to the saw, a painting tape should be glued to this place, which will protect from the formation of chips at the site of the cut. At the same time, it is recommended to lay the board with a facial coating up.

The hacksaw is not the main tool for cutting laminate in professionals due to low productivity, large physical costs and the danger of damage to the decorative layer of the panel. But in some cases with small volumes, when it is impractical to use an electrician or corner grinder, a hacksaw may be useful.

A direct alternative to a hacksaw is an electric saber’s saw. Now the market is a large selection of such a tool. However, the electric saw will not add much to amenities and speeds in work. Therefore, in our review we will not dwell on it in detail.

Electric

The electric jigsaw is a convenient, simple and very productive tool. In most cases, it occupies the first place, thanks to the convenience of circulation, accessibility in operation and efficiency of use. Therefore, when searching for solutions to the problem, than to cut a laminate at home, many of the users opt for it.

To use an electrician does not need special training or long.term skill, everyone can successfully cope with it. The result will be of high quality, the cut will be even and perfectly smooth, given that the tool works at high speeds. The main thing in its use is the correct selection of a laminate file.

Typically, a set with a jigsaw includes several paintings designed for processing a tree or laminate. If you do not have them, you should take care of the purchase in advance. Lamite on an electric laminate has a special shape and a small step of the teeth. Look for the appropriate marking on the packaging. The use of a wrong file will lead to the appearance of chips on the edges of the cut. Therefore, it is better to cut the panels with a special file for a laminate jig. If you could not find one, you can use the canvas for the metal, but the productivity of the work will be slightly reduced.

Important! Marking is performed from the wrong side of the panel. For cutting a jigsaw, it is necessary to lay the workpiece on a flat clean surface with a decorative side down. So the teeth of the files less damage the panel during the cut.

An important advantage of an electrician over other types of tools is the ability to make not only direct cuts, but also curved. This is very relevant if necessary to put a laminate floor in the places of passage of pipes and communications. Under them, the jigsaw will easily cut through the grooves and suckers.

A circular saw

The circular saw allows you to get a more even cut of laminate than an electrician, and at the same time much faster. However, working with such a tool requires great attention and is much more dangerous. Therefore, it is recommended to use the circular saw only to those who have skills and experience with a similar tool, or familiarized themselves with the order of work by watching the video.

Features of the laminate cutting process

Starting to lay a laminated floor, you need to know not only how to cut a laminate at home, but also how to use tools correctly. Among the main determining moments regarding the features of working with laminate, the following can be noted:

  • Large efforts should not be used when cutting laminate;
  • With a poorly cut, the board should be laid by the damaged side under the baseboard;
  • To obtain the perfect cut, the workpiece should be placed downward when working with a corner grinding and a circular saw or upside down when an electrician;
  • Before the rez, check the calculations several times in order to prevent damage to the materials;
  • Figure cuts should be performed using a template for measuring bends, gluing construction tape into the place of cutting.

How the laminate works

Laying the laminate only by whole parts is almost impossible. Laminate lamps are most often made rectangular shape. On the surface of the planks there is a thin film made of resin, which protects the laminate from various kinds of influences and damage. Under the protective layer is a layer with a shade, where the formation of a picture goes, which externally looks like a tree of various types.

Next is a layer of wood-based stove, which increases stiffness indicators. The latter is a layer of melamine, thanks to which the laminate is resistant to moisture. As a result, it turns out that in thickness such a coating will be about six to twelve centimeters. If you saw such products, then it is very important to carefully make the edge. Otherwise, curved chips may form, which will need to be compensated by valuable centimeters of the coating. It may also be necessary to replace the elements with a malfunction with new.

In order not to throw away valuable pieces of coating, which is quite expensive, it is better to prepare tools in advance that will make it possible to make even sections. Thus, you can protect yourself and immediately styling without spending additional resources.

Laminate cutting tools

If you choose tools for cutting laminate, then you should take into account a number of features.

  • It is important that the tools are convenient to use. In many ways, convenience depends on the ability to use the tools and preferences of people.
  • If the tools are low and ergonomic, then with their help you can do all the work much faster. When conducting repair work, time is a very valuable resource.
  • An important nuance when choosing a tool and a sawing is that the cut should be even, without any cracks and chips. Nevertheless, you do not need to focus on this nuance attention, since some kind of irregularity can be hidden under other elements.

Electric jigsaw

It is very simple when using the tool that allows you to cut the lamellas is a regular electric jigsaw. The jigsaw functions at very fast speeds. This means that you can make all the cuts very smoothly. An important nuance during the work of the jigsaw is the choice of a suitable tool for the tool. Today, most of these tools have in their set files for such coatings that can be easily replaced. If comparisons with other types, then they have a different shape, size and position of the teeth. One way or another, if there are no special files, you can also use standard with small teeth, which are used to cut metal products.

In order not to damage the layer with the image, make notes and all actions with the tool is necessary from the inside. It is better to put the coating on the table or stool so that the cut part of the panel is suspended. Firmly fixing the element with the hand, you need to quickly walk on the planned cut line.

Bosch has laminate cutting tools. Solutions from this German company are great for work. The assortment has devices for cutting both straight and figurators. There are also tools to make narrow cuts.

Special files for an electric jigsaw from the company are presented in a wide range. So, the company has a model in which the cloves are located on the reverse side. Such a saw will not harm the coating, and the cuts will be even and smooth.

In addition to cutting the laminate, the tool can be used for work with plywood, wood-bruise and wood-fiber slab.

There is also a model that is perfect for the curly cutting of a laminate or other wood coating.

  • A narrow saw will make the cut more neat.
  • If you need to make a cut as soon as possible, then the tool with large teeth will be an ideal solution, but the risk of damage to the material will increase.
  • Always use proven equipment with all the necessary certificates of authenticity.

Guillotine

To incite the necessary pieces of laminate panels, you can use the guillotine. If we draw analogies with a jigsaw, then the guillotine has a device with a mechanism. Outwardly you can make a comparison with large scissors. Such a device will not make noise, and with the help of guillotine it is easy to cut across the panel. True, to purchase a tool only in order to make repairs in one room, you should not. The guillotine will be more useful for people who, on a constant basis, lay coatings on the floor. specialists. It will be better to borrow such a tool for the time.

A circular saw

You can cut it, and using professional equipment. circular saw.

It is important to know that if you use a circular saw, then it should have a special.purpose disk suitable for work with metal products. In addition, to wield a circular saw, you need to have a certain level of skill.

When working with a circular saw, the panel is placed up and firmly fixed. You need to be very careful when working with such a tool. Always remember safety measures when working with equipment that can harm a person. Always fasten your sleeves and watch your hands.

The most budget circular saws will cost about forty dollars. Purchase such equipment to make a cutting coating from a laminate does not make sense. In addition, it is quite overall, and bring it to the house is not an option. If there is such a tool in stock, then you can produce all the manipulations with a laminate. It is necessary to use a disk for work with metal products, however, it is worthwhile to have experience so as not to damage the product and not harm your health.

Nuances for work with “circular”.

  • You need to make markings and make cuts on the front side.
  • It is important to firmly fix the part on the flat surface with a pattern upward. It is important that the lamella is installed correctly, and not so that one person holds it with his hands, and the second makes a cut.
  • If there is a machine with a “circular”, then everything is done in the same way as described above.
  • If the machine is used, then the laminate is not fixed, but simply carefully brought to the cutting disk. It is important to use protective equipment and protect your eyes.

Milling mill

For cutting laminate, you can also use a milling cutter. It is unlikely that each person has such equipment at home, however, specialists who are engaged in work with furniture products are usually always available. Using such a tool can make an ideal incision.

Drill saws for cutting

Today it is just an indispensable tool for repair, construction, as well as woodworking. You can’t do without such a motorized device. Saws, as well as appropriate laminate cutting discs today are in great demand.

Discs are classified depending on the work on the work. So, to work with lamellas, use a special device for boards.

! When buying such a device, it is necessary to pay attention to the number of teeth and the angle of their inclination, the geometry of sharpening, as well as the recesses between the teeth.

A small number of teeth. an option for working with chips and wood. The average amount is suitable for massive wood and soft metals. Large. used exclusively with a very powerful device, so it is not advised to use it for soft flooring.

It is the sharpening geometry that will affect the cleanliness of the cut and the efficiency of work. Available varieties. flat, trapezoidal, as well as alternating. The angle of inclination also affects the quality. Flat sharpening is better to use for quick cuts, the universal version is suitable for any tree.

There are also professional discs with special teeth from hard alloys. They have hardness, high strength, as well as resistance to destruction. This guarantees high performance, long service and excellent quality of work.

Cutting

This is a tool that allows you to cut at a professional level. The work of such a device resembles the work of guillotine, t.e. This is a knife that drops to the surface with a pen and divide it. It acts without noise and chips.

! To use it, you need to have skills and use great power.

Today this is the easiest device for those who want to know how to cut a laminate, as it allows you to work in a variety of conditions, but always with an excellent result.

Expanding an electrician

The use of such a power tool will facilitate the complexity of work. Its advantage is considered high speed and the ability to perform indirect cuts. When working with an electrician, marking is performed from the back of the panels and laminate is laid on the desktop when cutting, t. to. The supporting paw of the jigsaw reserves a trace in the form of a scratch. Such damage will not be noticeable if it remains on the wrong side.

The advantage of using a power tool is the ability to cut off several blanks at once without increasing the efforts made. When performing such cuts, the panels are stiffly fastened with clamps and control the correspondence of the size of each of them.

ATTENTION! When working with an electrician, it is recommended to use a canvas with a small tooth. This will improve the quality of the cut out end surface.

The disadvantage of using such a power tool is considered small irregularities in the cut line, t. to. manual work always distinguishes the absence of straightforwardness from machine.

The use of corner grinders

The versatility of a grinding machine allows you to quickly and efficiently cut off the required number of panels. If it is necessary to perform indirect cuts, the corner grinder will be relevant. When cutting off, the panels are placed upward, several blanks can be processed at once, but we must remember about the stiffness of laminate fixation, t. to. The power of the grinding machine creates vibration.

ATTENTION! The use of cutting disks for metal is a violation of fire safety. In this case, an unpleasant odor and smoke may occur.

Log in or register to write Комментарии и мнения владельцев, ask questions and participate in the discussion.

If you cut it, take a lot of bison with as a frequent tooth and inserts, enough for some time, then if you give it back, or rather and most likely just straighten the teeth, good sharpening is a very laborious lesson and there is money

From my experience I will say. Buy a corporate disk, Makita, Metabo, Bosch, you will not regret. Yes, it costs 2-3 tr, but it costs.Here is like that. Makita.Org.ru/osnastka/Diski/Diski-Pilnye/2429/

take a disk for that kind of money in order to lay 20-30 kV laminate? A normal person will buy a disc for 500. And in production, yes, it is better to take a good disk.

I also saw an attack before, and other China. And after I tried Makita, I realized that I was a loshara, and in vain was intensified to push the circular with both hands when you could with one finger 🙂

The more teeth, it’s cleaner than a cut!(with surfaces!).ure

Not certainly in that way.With a large number of teeth, a very small distance between them. If large turns, then small chips do not have time to fly out in one revolution and begins to burn the material and disk. Wins quickly stupid and chips appear.That is, either smaller teeth, or lower speeds.

well, this is a generalized statement)) not literal.so that after 1 mm there are teeth!) such probably does not exist and turnover with adjustment on the circular ?) I did not.)

Look at the marking of the disks. 85mm diameter. Obviously not on the machine))

A person is clearly not interested in such, he is interested in the discs from the circular.)

How To Cut Laminate Flooring? | Three Different Tools To Cut Laminate Flooring 2022

That’s exactly what. Revolutions 6 thousand. This is a minipil

exactly) my fault.I did not see the inscriptions on the disks.))

The second disk, we use it in production, but basically use the laminated wood-and-steering plate, and the Finnish plywood

The first disk. for the dissolution of the boards. He has a scan of teeth, so that it would not be closed.For a pure cut of laminate and plywood, you need a disk with a winning and with alternately mowed sharpening.

I really do not recommend taking cheap China. Get a winning attack in the forehead)

I support the previous speaker. Laminate saw (preferably more expensive) and forward. Files with ordinary tooth on a laminate sitting.I always cut normally in length.

Lower for plywood. ATO cut will be like a type of upper laminate with a lobby with a small tooth

For direct cuts, it is not very conveniently especially longitudinal

Since 2001 in the decoration and always used a jigsaw and no problem.Well, yes, I agree that the length is better than the circular, but with a small tooth, so that the laminate does not tear much

It depends on the jigsaw itself. the consumer consumption for “500” will be wagged with a file. Here you have a curve “furry” cut.

I myself work with such a machine with such disks The one that the second saws everything at all.Both plywood and laminate and slate and asbo-cement plates And the one that is the first (he was also in the set) I don’t understand at all why (foil foil)

Of these. definitely the second. And if you choose, then not just with attacks, but with a negative angle and a trapezoidal tooth, as well as with the maximum number of teeth. These are specialized laminate disks. They saw slowly (due to the negative angle of teeth), but as clean as possible (as much as possible for disks).

You’re wrong. A negative angle is needed for sawing aluminum profile.

As the trapezoidal sharpening of teeth is written in combination with the negative angle of inclination is ideal for thin.walled metal and plastic profiles, for high.quality cutting of plates, panels and laminate “. So we are both right.

How to cut a laminate at home?

You can choose one of the most popular and affordable options. Before you pay for the device, learn more about its capabilities and nature of the work:

  • Hacksaw. This is not to say that this is a modern option, but in some cases it turns out to be very helpful. The hacksaw never fails. For the best result of work, it is better to use a hacksaw for metal or wood with a small tooth. Start the cut on the back of the panel to prevent possible chips on the surface of the board;
  • Corner grinder. This is an angle grinding machine with a metal disk. How to cut a laminate correctly? Fix the lamella and slowly lower the corner grinding so that it does not break out of the hands and does not stall. Get ready for the fact that during operation an unpleasant smell will appear due to heating the disk;
  • cutter. Here is another popular device for cutting laminated material. It allows you to cut boards quickly and efficiently. The cutter is without effort to cope with both thin and thick panels. Such a perfect result cannot be achieved either when using a corner grinder, nor using an electrician. This is a device with a sharp blade, which is easily set in motion with a handle. Such a mechanism works very quietly, without noise and dust and does not need power supply;
  • a circular saw. What kind of file to saw laminate? This is an option for a neat saw, equipped with a special disk. Put the board on the hard even surface with the front side, securely fix it and apply a fishing line for a cutting trimmer. Then smoothly lower the disk of corner grinding and gradually move it along the intended line without stuck in the board. It is this option that requires skills in working with a circular saw, as well as great patience. But, the advantage in a qualitative and fast result. Are there any cons? Yes, if the smell of a burning tree can be considered a minus that appears in the process of sawing;
  • Electric jigsaw. This is quite effective, but a simple option. Make sure the jigsaw equipped with a special wood nozzle. Before starting work, you need to fix the lamella on the floor. Turn on the device and set it up for increased speeds to protect the material from possible chips. Your movements should be smooth.

! At least two people should work with an electrician.

Blade showdown, cutting melamine laminate boards

Laminate saw

I would like to pay special attention to laminate files, which are used together with the jigsaw:

  • The goal is a quick cut: if you need to cut many boards at once in a short period, then it is better to choose an option with a large tooth. The fact is that the larger the tooth will be, the faster the work will proceed. The only negative is that the cut will be less accurate, the cut is not hot. For such a purpose, as a rule, they buy a T101D marking tool, since it is suitable even for a thickness of 75 mm. For 100 mm, choose 244D, 200 mm. 344D;
  • Purpose. clean cut: here you need to use the option T101B. It is characterized by a smaller tooth, the poet cut is more smooth. In this case, chips are absent. Of course, even 75 mm can be cut with such a file, but it will take several times more time.

The laminate saw is equipped with a back tooth, which, when compared with other options, is directed in the other direction. Why is it necessary? This is done so that chips do not form on the front side of the lamella and the appearance does not deteriorate.

! Such boards can easily be sawed with a small divorce and moderate teeth. In this case, the speed of the jigsaw should also be moderate. So the tool will not introduce and will not break the edges.

Laminate cutting with a construction knife

On the shelves of any construction store you can find a extending household knife with replaceable blades. Using this tool, you can process almost any material, including ensure laminate cutting.

For this type of work, a powerful knife with crashing heads made of high.quality steel will be required. It is better to carry out cutting work using a building corner or a previously fixed steel line. Simultaneously with a strong press, the master leads the cutting edge of the knife along the marking, providing even cutting without chips. If the floor element is too thick, then the procedure must be repeated several times until one part of the part is completely separated from the other.

Drilling holes using a drill or screwdriver

Drilling equipment is also necessary when cutting laminate floors, since quite often the board needs to be laid around the heating riser or other pipes for communications. For the correct performance of this type of work in the panel, it is necessary to drill a hole using a conventional drill or screwdriver.

A feature of drilling is a large diameter of the hole, for the device of which you need to use a special tree expander. It is a milling tip with a landing rod suitable for a standard tsang drill. It is better to have a set of such expanders in stock, since the master may have a task to increase the already drilled hole.

To work with a laminate, it is not at all necessary to have a powerful drill. the simplest tool with minimal characteristics is enough. Battery screwdriver will also quickly cope with such a task.

It should be remembered that immediately after the laminate device, the installation of skirting boards will be required, which in most cases are attached to the brackets, previously fixed to the wall using dowels and screws. So, drilling equipment will be indispensable in the nearest related work on the finishing of the room.

How to saw a laminate are tried by users

Andrey, 22 years old. I live in a one.room apartment, I decided to put a laminate in a room on an old parquet. I have not yet acquired the instrument. I took a hacksaw “Piranha” in the store with a hacksaw with teeth step 15 per inch. High.quality sharpening, even after laying continues to cut well, does not leave chips. He saws along and down without problems, the blade does not clamp, but manually adjust the last panels in width still energy.intensive.

Pavel, 44 years old. On his old electrician installed a T101BIF file to cut a laminate without chips. The bimetallic canvas copes well with sawing the panels along and across. Laid a laminated coating in a private house on the ground floor 10 mm thick (33 class). The entire area, not counting the bathroom, was about 60 square meters. m. The saw did not break, even at the very end I sawed perfectly. Only positive emotions remained.

which, disk, better, laminate

Peter, 48 years old. I liked to use a special laminate cutter. A guillotine with a curved blade cuts panels with a minimum noise, which in the apartment is very important. During work, a lot of fine dust is not formed, only large waste remains, which are easy to collect. The machine is suitable for straight cuts in width, length and at an angle. There are no large chips when cutting. Due to a large lever, you do not have to make a lot of effort.

Alexander, 52 years old. I tried at home to cut a laminate with a corner grinder with a diamond segmented disk on concrete. It saws quickly, it turns out an even edge, you don’t get tired when working. The only thing that is very dusty is very small particles that fly throughout the room. I cut it on the street, since I live in a private house, it is not a problem to go out.

Oleg, 29 years old. Of the power tools, only a circular saw was at home. I used a wooden wood disk with carbide attacks “Zubr” for cutting. Chose with 48 teeth. Prepared a convenient table from black boards. Laid a laminate with a thickness of 8 mm, set the depth of cut to this size, taking into account a small output of 1-2 mm. There is no much experience with power tools, so he cut along and across the guide to make the edges even.

Comparative table with parameter assessment

We will evaluate the listed tools for working with a laminate according to some characteristics. To do this, make a table with conventions:

When evaluating, we will use the five.point system.

Tool CHR Kr Cf BSh Kr
Electric 5 5 four 3 four
Manual cut four 2 5 5 5
Corner grinder 5 3 four 3 four
A circular saw four 2 5 3 5
Wood hacksaw four 2 3 four 3

Additionally! The purity of the cut of laminated panels is important, but in most cases small chips and irregularities at the site of the cut are easily closed with floor skirting boards.