Which drill to choose for home use

Drilling diameter

The instructions for the drill indicate what the maximum and minimum hole a drill can make in wood and metal; for some models, this parameter is also added for brick and concrete. If you insert drills with a larger diameter than those for which it is designed, the tool will very quickly overheat and break. The minimum diameter, as a rule, is 0.3-0.6 mm, the maximum is 30 mm, but often this parameter does not exceed 10-15 mm.

which, drill, choose, home

Drill power

The power of the drills on sale ranges from 300 to 1500 watts. The higher this indicator, the more loads the tool can handle. For professional models, the power is usually higher than 800-1000 watts. The weight of the device also grows with power, so it makes no sense to take a drill with a large margin for this parameter. your hands will get very tired when working. On the contrary, if you take a model with insufficient power, then your hands will get tired of the fact that you will have to apply additional load during drilling.

If you have to work with materials no stronger than brick, then you can stop at an 800 W drill. If you plan to drill concrete or constantly use a drill as a construction mixer, then you will need a more powerful model.

Drill types by purpose

Depending on what set of functions the drill has, the following main types of tools are distinguished:

  • an ordinary drill, it is sometimes called a hammerless drill;
  • hammer drill;
  • drill-electric screwdriver;
  • drill mixer;
  • angle drill.

All these modifications are quite different from each other, including in price, therefore, when buying, it is so important to be aware of the purposes of using the tool.

Electric drill

It makes sense to choose a drill-electric screwdriver when you also need a tool for tightening / unscrewing screws, self-tapping screws and screws. In the electric screwdriver mode, such a drill has a low rotational speed and high torque, in the drill mode, it is the other way around. It is impossible to call the device completely universal, since such a drill is not suitable for drilling concrete and bricks.

Shaft rotation speed and its adjustment

The rotational speed of the drill shaft at idle speed can reach 3500 rpm, but such a frequency is not always necessary. The higher this parameter, the faster it will be possible to drill the hole and the smoother its walls will be. High revs are more necessary in order to grind and polish the surface, but they will also come in handy with impact work. In order to tighten the screw, 400-500 rpm will be enough.

The versatility of the tool is provided by a rotational speed switch. In the simplest models, a step switch is used, in the more advanced ones. an electronic one that clearly reacts to the force of pressing. If you press hard, we get the maximum speed.

A speed limiter and a soft start will also be helpful. The latter allows you to smoothly accelerate the engine and provides a gradual increase in speed from minimum to required. This allows you to get rid of jerks at the start, overloads and drilling errors.

Drill mixer

A drill mixer differs from a conventional universal drill by the presence of special attachments in the kit, which allow you to conveniently mix liquid and semi-liquid compositions. The design of the tool, as a rule, provides for special handles for a comfortable grip during mixing. The drill mixer is suitable for mixing putties, adhesives, paints and other mortars up to 10 liters in volume and allows a more thorough mixing than with a manual process.

Drill chuck type

Depending on how the drill is fixed, drill chucks can be:

  • a key or toothed chuck fixes the drill with a key, clamps it with three symmetrical “petals”. It is believed that such a mount allows you to more securely hold the drill, therefore it is used in powerful and impact drills. The downside is the inconvenience when replacing the drill, since you must use a special key. By the way, he can get lost, and then the time for replacement increases several times. Some craftsmen tie the key to the drill;
  • The quick-clamping mechanism allows for very quick change of drills using only small manual effort. In terms of reliability, it is not inferior to the key chuck, but still it is used only in drills with low power, designed to work with not very hard materials. In terms of durability, the mechanism is inferior to the key.

Also, when choosing a drill, pay attention to the diameter of the chuck fit. The minimum value may approach 0, but usually it is not necessary to use a grip less than 1.5 mm. The maximum value can be 10-13 mm and even 16 mm for powerful drills.

Conventional drill

This is a drill without any bells and whistles. It does not have an impact function, so only wood, drywall, metal and other not very hard surfaces can be drilled with it. This tool is suitable for minor repairs in the country, in a barn, a wooden house. Conventional drills without impact function can be cordless or powered.

Additional functions

Hole drilling is not the only useful function of the tool in question. Using an electric drill, you can perform the following work:

  • tightening of fasteners (screws, self-tapping screws);
  • grinding and cleaning surfaces of various materials;
  • preparation of building mixtures.

All of the above types of work require the necessary equipment: metal brushes, mixers, extension cords, angle nozzles.

How a drill differs from a hammer drill

At first glance, the differences between a drill and a hammer drill are imperceptible, but they are significant. A drill is intended for drilling holes, and a hammer drill is a tool that breaks holes in any solid material or crushing it. Despite the fact that many modern drills have an impact function, the impact power of impact drills (the energy transmitted to the drill) is very low. The hammer drill differs from the drill in that the blow for it is the main mode of operation. the energy with which the drill cuts into the material reaches tens of joules.

How to choose an electric drill for home

To choose the right electric drill for your household, you must consider the following criteria:

  • the presence of an impact mechanism;
  • network or battery version;
  • electric drill power;
  • shaft rotation frequency;
  • drilling diameter;
  • cartridge type;
  • equipment.

For home use, a hammer drill is preferable. In everyday life, it becomes necessary to drill walls for fastening various building elements, furniture, paintings, lamp brackets and other things. There is no need for a drill with a battery as such. For the home, the network model is also quite suitable. In some cases, an extension cable may be required to connect.

Mains or rechargeable

A power drill is a tool with a cable and a plug for connecting to a 220 V power supply. Such a drill is used permanently, within one workplace, mobility is limited by the length of the cable. Rechargeable models make the range of applications wider and can be used in rooms with no power supply networks or in the open air. But at the same time, there remains the need to connect the charger for the drill battery to the mains. For home and summer cottages, a model of both network and battery versions is suitable.

Power tools from different manufacturers differ in price levels. The more expensive the device, the higher the build quality, the better the materials used in its manufacture. Professional tools that can work a full shift are 2-3 times more expensive than household tools. Do not overpay for industrial drills if you drill holes on an occasional basis.

Equipment

Drills on sale can be presented as a separate tool, as well as supplemented with accessories. The main components for an electric drill are drills of various diameters and purposes. Additional accessories:

  • reserve cartridge;
  • grinding attachments;
  • drills of the crown type;
  • sweep;
  • mixers.

Very convenient if the drill is placed in a plastic case.

Drills are divided according to the material to be processed:

  • metal. steel drills with a spiral flute;
  • wood. twist drills with a centering tip, feather and beam drills. for drilling large holes;
  • concrete. twist drills with a special carbide tip and crowns;
  • glass. lance drills with abrasive or diamond coating for making holes in ceramics and glass.

When choosing a drill, equipment is important. It is more expensive to buy various accessories later than a single set.

The manufacturing company bears warranty responsibility not only for the tool, but also for the quality of the equipment.

Shock or unstressed

As the name suggests, a simple hammerless drill has one function. drilling holes. Often an electric drill has an impact mechanism. An impact drill can drill holes in concrete or masonry by hitting the rotary drill in the axial direction. On models of this design, there is a switch between the drilling mode and the hammer drilling mode: usually the pictogram with the image of the drill indicates the simple drilling mode, the picture with the hammer activates the hammer mode.

READ  How to cut the corners of a ceiling plinth at home

Mode switch: drill or hammer

An impact drill cannot compete with a hammer drill when punching deep holes or grooves, only a hammer drill is suitable for this.

Chuck type

Modern models of electric drills are equipped with two types of chucks.

    Keyless. Clamping the drill in such a chuck is performed by hand force. Such cartridges are made of plastic. Designed for quick and frequent drill changes. They do not provide reliable fastening of the drill in the chuck. Applicable on models with and without impact mechanism.

Keyless chuck hand tighten

Key. The chuck of this design is made of metal and equipped with a special toothed crown and a wrench for tightening it. This type of chuck provides reliable fixation of the drill, but requires more time to change the drill. Applicable on models with and without impact mechanism.

The key clamps the drill securely in the chuck

For home use, a drill with a metal key chuck is preferable.

Lack of key cartridge. key can be lost. It is recommended to attach the key to the cord of the drill.

The best impact drills in terms of price / quality ratio

Hammer drills are used for large holes in concrete, stone and metal. There is a cam inside the device that allows the chuck with a drill inserted into it to increase the impact force with translational movements.

Such drills are more powerful than conventional models, but they also cost a little more.

Advantage: Best price / quality solution, lightest (1400 grams)

Country of origin: Russia (assembly of China)

The drill from Interskol received gold among inexpensive percussion drill models. It is the most popular tool among this price segment, and is popular not only for its price, but also for its set of options. The power of the device is 0.58 kW, which makes it possible to drill concrete to a diameter of 1.2 cm. The hardware speed is 2 800 rpm, due to which the performance indicator is the highest. With all this, the weight of the drill is only 1400 grams, which is the best indicator of this TOP.

Buyers note that the device is reliable, ergonomic, the quality of materials is excellent. Impact drilling helps when working with very hard materials, and reversing makes the job easier. An extra handle is added convenience and a long power cord does not require an extension cord.

As the main drawback, I highlight the strong heating and the key cartridge.

The third place among the powerful hammer drills for the home goes to this particular model. She is a strong average, since for a nice price you will get excellent performance that can compete with the TOP models.

The model is powerful (0.65 kW), and this is enough for working with steel and concrete. The design of the key chuck is proprietary, and allows the process of changing drills, while the teeth on the lock nut do not grind. Impact mode will help you quickly and accurately make holes even in very strong materials.

Customers highlight strengths such as the strength of the case and the well-rubberized and long cord. The reverse mode helps with difficult jobs, and the mechanical interlock helps you not worry about safety. In this TOP, this is the lightest tool, which facilitates a long process of work.

The disadvantages include the lack of low revolutions and overheating during intensive drilling.

Advantage: Better price / performance ratio

Country of origin: Japan (assembly Romania)

In second place we have a drill from Makita. This model has good performance and reliability. Such a drill has a key chuck, in which you can clamp drills from 0.15 to 1.3 cm.Powered from a 220 V network, which means you can use the device in any room.

The power is decent for this price (0.65 kW), which makes it possible to drill concrete up to 1.6 cm in diameter.Rotation speed at a maximum of 2,800 rpm gives good performance indicators.

On the plus side, users include light weight, good ergonomics and excellent assembly. In addition, the manufacturer has provided an additional handle in the kit. There is also a depth stop for drilling, and you can mount the drill on a drill stand for stationary work. The downside of the model is the ill-conceived arrangement of the switches and the case that is not provided for in the kit.

This model from Bosch is a great value for money electric impact drill. This unit has a vaunted German reliability, and despite the price, it is popular.

Unlike the competition, this tool has a keyless chuck that reduces drill change times. The power is an order of magnitude higher. 0.75 kW, and this is the best indicator so far. The maximum torque gives us 10 Nm, thanks to which the device will perfectly come out even from the most durable and difficult holes.

Buyers note that the grip is ergonomic, the build quality is some of the best, and a large carrying case is included. Thanks to the ability to adjust the speed, you can choose the optimal parameters just for yourself. In the form of a metal pin, you will find a drilling depth stop in the device. this will allow you to set the exact size. Convenient spindle lock for quick drill change.

The downside is overheating and unreliable reverse mechanism.

Which drill to choose for home and work. TOP-10 best models

The main purpose of this tool is to drill materials with different densities and gouge walls for laying communications and electrical wires.

All types of drills can be divided into two main categories: hammer-equipped and non-impact drills. The first is somewhat more powerful and can be used for heavy work where a lot of force is required, while the second tool is more suitable for use in the walls of the house.

Impact principle. extra impact on the chuck, which helps to increase the efficiency of the drilling process.

In our TOP-15 rating, we will consider only the best models from manufacturers such as Bosch, Board, Makita, DeWALT and Metabo, as well as the Russian Interskol.

To make construction work and repairs not a burden, many tools are used that help to reduce the time for carrying out certain or other operations.

The drill is one of the most popular machines. It is used in almost all types of work, and especially in repair.

The best impact drills under 2000 rubles

If you are thinking about which drill to choose for home use, stop the choice on budget models, with which you can drill holes for dowels for installing a TV, make holes in wood, drywall, brick.

Even in such cheap models, the power is enough for home work. Such a device will be a great gift for a husband who is not a professional, but a simple home user. The most famous manufacturers will be listed below.

Advantage: best ergonomic model.

Country of origin: Germany (assembled in China)

This hammer drill model is an ergonomic and convenient tool that will be a reliable assistant for you in your home or country. This device has a normal power for such a price (0.65 kW), in order to drill wood up to 2.5 cm / metal up to 1 cm / concrete up to 1.3 cm this is quite enough.

Comfortable work is ensured by the low weight of the tool and the rubberized handle. The model also has many useful options, among which we highlight reverse, hammer drilling and speed control. Thanks to this, you can customize the device for any material.

In the kit you will find a depth gauge, and a couple of spare brushes. The drills are stored in a special compartment in the handle. All users of this model noted that it is convenient to use and has all the necessary functions.

Disadvantages are small. the motor gets very hot with prolonged use, and the switches are unreliable.

Advantage: the best value for money

Country of origin: Russia (assembly of China)

This model got into the top three of the best inexpensive models as a bronze medalist. This model is the most powerful in this TOP. 0.81 kW, due to which you can work even with concrete. The device has a key chuck, you can clamp drills with diameters from 0.15 to 1.2 cm. The drill has only one operating speed, but the frequency of the percussion mechanism for this budget device is impressive. 42,000 strokes / min. If you need stationary drilling, use a drilling machine.

Strengths. power, long power cable and good ergonomics. The body is made of high-strength plastic that is resistant to mechanical damage. There is a lock button against accidental activation, as well as a drilling depth limiter, which will help to obtain the specified parameters of the holes. The drill weighs about 2 kg, due to this, the tool is stable when working.

The main disadvantage is high noise levels and the fact that there is no case included.

Country of origin: Germany (assembled in China)

Which drill to choose if there are so many good models even in the budget category? We offer you the BOARD device, which took the second place. The device has the lowest cost, but it copes well with the tasks. The percussion mechanism is sufficient for working with hard materials, and the power of 0.5 kW will cope with metal and concrete. The key chuck holds the drills perfectly. You can adjust the speed with a switch.

READ  Drill Button Does Not Adjust Turns

As advantages, buyers highlight low cost, small size and several modes of operation. The device is equipped with a specially reversible feed. For safety during use, a power-on lock button was provided so as not to start the drill accidentally. For ease of operation, an additional handle is provided here. In addition, the package includes spare brushes and a case.

The downside is the fragile body and not very high-quality equipment materials.

When choosing a drill, pay attention to the following characteristics:

  • The higher the power, the more durable materials the device will “pull”. But you will have to pay extra for power, but the performance will also be an order of magnitude higher.
  • Start blocking. An important point for the safety of operators, it prevents accidental start-up. It is performed in the form of a mechanical stopper.
  • Cartridge type. In inexpensive models, this is a key type, where you will have to use a special key to change the cartridge. Keyless chucks speed up bit changes and make the process easier.
  • Additional handle. Makes it easier to work with a drill. Additional fulcrum will reduce hand stress and improve accuracy.
  • Cord length. Since many models are powered by mains only, a long cable will be important. Usually, a 4 m cord is included. other, smaller cords in length will be inconvenient, and you will need to use an extension cord.

The best models for professional use

Advantage: good performance

This powerful model of an electric hammer drill for repair is the fourth position of the TOP among models for professionals. This tool is of high quality, has a power of 0.95 kW and can easily drill holes up to 2 cm in concrete and up to 1.3 cm in metal. SDS keyless chuck will help you install drills in diameters from 0.15 to 1.3 cm.

Drilling with hammering improves the working efficiency. By the way, about the striking mechanism: at maximum speed, it produces up to 56,000 beats / min, which makes the device highly productive. The drive of the device is equipped with a safety clutch, which, when the drill is jammed, will separate the gearbox and the spindle, and thereby help prevent destruction.

To the pluses, users attributed the power, build quality and case included. The additional handle makes the drill comfortable to hold. Rotation speed can be adjusted with a dedicated rotary switch.

The minus of the model is a short network cable and poorly thought out ergonomics.

Advantage: excellent value for money

Country of origin: Germany (assembly of Russia)

The best combination of price and quality is in this particular model. The device is designed for use in professional activities, therefore, it is equipped with a 0.85 kW motor, a two-speed gearbox, and a safety clutch. You can also work with this tool from the machine.

The maneuverability of the network cable gives you a swivel mount. For continuous drilling, there is a switch lock button. Thanks to the comfortable handle with a soft grip, work will not be a burden, especially since the model itself is lightweight.

How To Choose A Cordless Drill or Impact Driver. Ace Hardware

Professionals attribute the advantages of the model to excellent quality, a reliable cartridge, a durable cord and a convenient case.

The disadvantages include the Russian assembly, since the gearbox often fails.

Benefit: Highest power rating, operator protection

Country of origin: Japan (assembled in China)

An excellent professional impact drill with high productivity and good protection for the operator when working. With this model, you can easily drill holes in stone, plastic, ceramics, metal and concrete.

Powerful 1,010 kW motor and electronic controls work well at any speed level. The body is made of impact-resistant plastic, and there is also protection of the internal mechanism from dust, which has a good effect on the service life. The drill is universal, it will be convenient to work with both right-handers and left-handers.

Installers and professionals say they love the high performance, versatility, durability, ease of use and safety.

Buyers were only dissatisfied with the anti-jamming safety clutch performance.

Advantage: Work in a drilling machine, the best functionality

Drill Metabo has become the leader of all electric impact drills. The device perfectly harmonizes the functionality, thought out to the smallest detail, power (0.85 kW), which allows you to work with steel and concrete. I am also pleased with the speed of the torque, which at the maximum gives out up to 36 Nm, which is the merit of the electric motor.

A two-speed gearbox and a switch for hammerless and hammer drilling will help you to find the optimal drilling mode. The tool can be used like an electric screwdriver thanks to the pulse mode. The protection of the internal mechanism is due to the overload clutch.

The advantages of this device are its reliability, cord length, wide functionality and comfortable grip.

The downside is not a very high-quality cartridge and the price.

In the end, I would like to note that if you want a device that is smaller in size and weight, you should pay attention to hammerless drills. They are used for drilling in almost any material.

To work with durable materials without an impact mechanism, devices focus on power, which means that such models will cost more.

Interskol, Bosch, Makita, DeWALT have shockless devices.

The best impact drills under 2000 rubles

If you are thinking about which drill to choose for home use, stop the choice on budget models, with which you can drill holes for dowels for installing a TV, make holes in wood, drywall, brick.

Even in such cheap models, the power is enough for home work. Such a device will be a great gift for a husband who is not a professional, but a simple home user. The most famous manufacturers will be listed below.

Advantage: best ergonomic model.

Country of origin: Germany (assembled in China)

This hammer drill model is an ergonomic and convenient tool that will be a reliable assistant for you in your home or country. This device has a normal power for such a price (0.65 kW), in order to drill wood up to 2.5 cm / metal up to 1 cm / concrete up to 1.3 cm this is quite enough.

Comfortable work is ensured by the low weight of the tool and the rubberized handle. The model also has many useful options, among which we highlight reverse, hammer drilling and speed control. Thanks to this, you can customize the device for any material.

In the kit you will find a depth gauge, and a couple of spare brushes. The drills are stored in a special compartment in the handle. All users of this model noted that it is convenient to use and has all the necessary functions.

Disadvantages are small. the motor gets very hot with prolonged use, and the switches are unreliable.

Advantage: the best value for money

Country of origin: Russia (assembly of China)

This model got into the top three of the best inexpensive models as a bronze medalist. This model is the most powerful in this TOP. 0.81 kW, due to which you can work even with concrete. The device has a key chuck, you can clamp drills with diameters from 0.15 to 1.2 cm. The drill has only one operating speed, but the frequency of the percussion mechanism for this budget device is impressive. 42,000 strokes / min. If you need stationary drilling, use a drilling machine.

Strengths. power, long power cable and good ergonomics. The body is made of high-strength plastic that is resistant to mechanical damage. There is a lock button against accidental activation, as well as a drilling depth limiter, which will help to obtain the specified parameters of the holes. The drill weighs about 2 kg, due to this, the tool is stable when working.

We Ranked Every DRILL/DRIVER From Beginner LVL To Expert LVL (What Level Are You?)

The main disadvantage is high noise levels and the fact that there is no case included.

BORT BSM-500-P

Country of origin: Germany (assembled in China)

Which drill to choose if there are so many good models even in the budget category? We offer you the BOARD device, which took the second place. The device has the lowest cost, but it copes well with the tasks. The percussion mechanism is sufficient for working with hard materials, and the power of 0.5 kW will cope with metal and concrete. The key chuck holds the drills perfectly. You can adjust the speed with a switch.

As advantages, buyers highlight low cost, small size and several modes of operation. The device is equipped with a specially reversible feed. For safety during use, a power-on lock button was provided so as not to start the drill accidentally. For ease of operation, an additional handle is provided here. In addition, the package includes spare brushes and a case.

The downside is the fragile body and not very high-quality equipment materials.

When choosing a drill, pay attention to the following characteristics:

The higher the power, the more durable materials the device will “pull”. But you will have to pay extra for power, but the performance will also be an order of magnitude higher.

  • Start blocking. An important point for the safety of operators, it prevents accidental start-up. It is performed in the form of a mechanical stopper.
  • Cartridge type. In inexpensive models, this is a key type, where you will have to use a special key to change the cartridge. Keyless chucks speed up bit changes and make the process easier.
  • Additional handle. Makes it easier to work with a drill. Additional fulcrum will reduce hand stress and improve accuracy.
  • Cord length. Since many models are powered by mains only, a long cable will be important. Usually, a 4 m cord is included. other, smaller cords in length will be inconvenient, and you will need to use an extension cord.
  • READ  Can a Screwdriver Drill Concrete

    Which drill to choose for home use

    To make construction work and repairs not a burden, many tools are used that help to reduce the time for carrying out certain or other operations.

    The drill is one of the most popular machines. It is used in almost all types of work, and especially in repair.

    The best impact drills in terms of price / quality ratio

    Hammer drills are used for large holes in concrete, stone and metal. There is a cam inside the device that allows the chuck with a drill inserted into it to increase the impact force with translational movements.

    Such drills are more powerful than conventional models, but they also cost a little more.

    Advantage: Best price / quality solution, lightest (1400 grams)

    Country of origin: Russia (assembly of China)

    The drill from Interskol received gold among inexpensive percussion drill models. It is the most popular tool among this price segment, and is popular not only for its price, but also for its set of options. The power of the device is 0.58 kW, which makes it possible to drill concrete to a diameter of 1.2 cm. The hardware speed is 2 800 rpm, due to which the performance indicator is the highest. With all this, the weight of the drill is only 1400 grams, which is the best indicator of this TOP.

    Buyers note that the device is reliable, ergonomic, the quality of materials is excellent. Impact drilling helps when working with very hard materials, and reversing makes the job easier. An extra handle is added convenience and a long power cord does not require an extension cord.

    As the main drawback, I highlight the strong heating and the key cartridge.

    DeWALT DWD024

    The third place among the powerful hammer drills for the home goes to this particular model. She is a strong average, since for a nice price you will get excellent performance that can compete with the TOP models.

    The model is powerful (0.65 kW), and this is enough for working with steel and concrete. The design of the key chuck is proprietary, and allows the process of changing drills, while the teeth on the lock nut do not grind. Impact mode will help you quickly and accurately make holes even in very strong materials.

    Customers highlight strengths such as the strength of the case and the well-rubberized and long cord. The reverse mode helps with difficult jobs, and the mechanical interlock helps you not worry about safety. In this TOP, this is the lightest tool, which facilitates a long process of work.

    The disadvantages include the lack of low revolutions and overheating during intensive drilling.

    Makita HP1620

    Advantage: Better price / performance ratio

    Country of origin: Japan (assembly Romania)

    In second place we have a drill from Makita. This model has good performance and reliability. Such a drill has a key chuck, in which you can clamp drills from 0.15 to 1.3 cm.Powered from a 220 V network, which means you can use the device in any room.

    The power is decent for this price (0.65 kW), which makes it possible to drill concrete up to 1.6 cm in diameter.Rotation speed at a maximum of 2,800 rpm gives good performance indicators.

    On the plus side, users include light weight, good ergonomics and excellent assembly. In addition, the manufacturer has provided an additional handle in the kit. There is also a depth stop for drilling, and you can mount the drill on a drill stand for stationary work. The downside of the model is the ill-conceived arrangement of the switches and the case that is not provided for in the kit.

    Bosch PSB 750 RCE CASE (BZP)

    This model from Bosch is a great value for money electric impact drill. This unit has a vaunted German reliability, and despite the price, it is popular.

    Unlike the competition, this tool has a keyless chuck that reduces drill change times. The power is an order of magnitude higher. 0.75 kW, and this is the best indicator so far. The maximum torque gives us 10 Nm, thanks to which the device will perfectly come out even from the most durable and difficult holes.

    Buyers note that the grip is ergonomic, the build quality is some of the best, and a large carrying case is included. Thanks to the ability to adjust the speed, you can choose the optimal parameters just for yourself. In the form of a metal pin, you will find a drilling depth stop in the device. this will allow you to set the exact size. Convenient spindle lock for quick drill change.

    The downside is overheating and unreliable reverse mechanism.

    Which drill to choose for home and work. TOP-11 best models

    The main purpose of this tool is to drill materials with different densities and gouge walls for laying communications and electrical wires.

    All types of drills can be divided into two main categories: hammer-equipped and non-impact drills. The first is somewhat more powerful and can be used for heavy work where a lot of force is required, while the second tool is more suitable for use in the walls of the house.

    Impact principle. extra impact on the chuck, which helps to increase the efficiency of the drilling process.

    In our TOP-15 rating, we will consider only the best models from manufacturers such as Bosch, Board, Makita, DeWALT and Metabo, as well as the Russian Interskol.

    The best models for professional use

    DeWALT DWD 522 KS

    Advantage: good performance

    This powerful model of an electric hammer drill for repair is the fourth position of the TOP among models for professionals. This tool is of high quality, has a power of 0.95 kW and can easily drill holes up to 2 cm in concrete and up to 1.3 cm in metal. SDS keyless chuck will help you install drills in diameters from 0.15 to 1.3 cm.

    Drilling with hammering improves the working efficiency. By the way, about the striking mechanism: at maximum speed, it produces up to 56,000 beats / min, which makes the device highly productive. The drive of the device is equipped with a safety clutch, which, when the drill is jammed, will separate the gearbox and the spindle, and thereby help prevent destruction.

    To the pluses, users attributed the power, build quality and case included. The additional handle makes the drill comfortable to hold. Rotation speed can be adjusted with a dedicated rotary switch.

    The minus of the model is a short network cable and poorly thought out ergonomics.

    GSB 19-2 RE CASE (BZP)

    Advantage: excellent value for money

    Country of origin: Germany (assembly of Russia)

    The best combination of price and quality is in this particular model. The device is designed for use in professional activities, therefore, it is equipped with a 0.85 kW motor, a two-speed gearbox, and a safety clutch. You can also work with this tool from the machine.

    The maneuverability of the network cable gives you a swivel mount. For continuous drilling, there is a switch lock button. Thanks to the comfortable handle with a soft grip, work will not be a burden, especially since the model itself is lightweight.

    Professionals attribute the advantages of the model to excellent quality, a reliable cartridge, a durable cord and a convenient case.

    The disadvantages include the Russian assembly, since the gearbox often fails.

    Makita HP2070F

    Benefit: Highest power rating, operator protection

    Country of origin: Japan (assembled in China)

    An excellent professional impact drill with high productivity and good protection for the operator when working. With this model, you can easily drill holes in stone, plastic, ceramics, metal and concrete.

    Powerful 1,010 kW motor and electronic controls work well at any speed level. The body is made of impact-resistant plastic, and there is also protection of the internal mechanism from dust, which has a good effect on the service life. The drill is universal, it will be convenient to work with both right-handers and left-handers.

    Installers and professionals say they love the high performance, versatility, durability, ease of use and safety.

    Buyers were only dissatisfied with the anti-jamming safety clutch performance.

    Metabo SBE 850

    Advantage: Work in a drilling machine, the best functionality

    Drill Metabo has become the leader of all electric impact drills. The device perfectly harmonizes the functionality, thought out to the smallest detail, power (0.85 kW), which allows you to work with steel and concrete. I am also pleased with the speed of the torque, which at the maximum gives out up to 36 Nm, which is the merit of the electric motor.

    A two-speed gearbox and a switch for hammerless and hammer drilling will help you to find the optimal drilling mode. The tool can be used like an electric screwdriver thanks to the pulse mode. The protection of the internal mechanism is due to the overload clutch.

    The advantages of this device are its reliability, cord length, wide functionality and comfortable grip.

    The downside is not a very high-quality cartridge and the price.

    In the end, I would like to note that if you want a device that is smaller in size and weight, you should pay attention to hammerless drills. They are used for drilling in almost any material.

    To work with durable materials without an impact mechanism, devices focus on power, which means that such models will cost more.

    Interskol, Bosch, Makita, DeWALT have shockless devices.