Which is better miter saw or circular
What is the difference between a circular saw and a miter saw
Circular Saw
The circular saw has a cutting mechanism. it is a serrated disc. It serves for ripping, although with the help of additional rails, you can unfold the blade at different angles and get cross and oblique cuts. The quality of the cut is influenced by the type of blade, its diameter, the shape of the teeth and the sharpening angle. The more teeth. the lower the speed, but the quality of the cut is better. The power of circular saws ranges from one to two and a half kilowatts. Some of these tools are very difficult to handle while suspended.
Miter saw
A miter saw is a type of circular or circular saw. It is used for angular and inclined cuts at various angles. It differs from the above-mentioned models in that it is fixed in the bed, which in turn is connected to the work table. In this case, the disc can move up and down, maintaining the angle at which the cut will be made. You can tilt the saw using a lever.
With such a cut, the blade can be turned in different planes, while using the guides on the desktop, the blade is fed without deviating from the specified parameters. These properties make the saw popular and in demand when carrying out repair work; in addition to wood, it can be cut into tiles, metal profiles.
In addition, there are combined miter saws, where the cutting disc is able to rotate 180 degrees in several movements, and you can get a full-fledged circular saw. Rotating ability of the disc allows for more complex workpieces.
- What is the difference between a circular saw and a miter saw
- How to choose a circular saw
- How to choose a saw blade
Differences
Miter saw. it is a saw designed for repeated, fixed short cut. It is a small mechanism with a moving electrical device that goes down at various angles and tilts.
Circular saw is a circular hand saw for sawing boards, both lengthwise and crosswise, can be fixed on the machine.
A circular saw has more power than a miter saw with a disc of the same diameter, because a miter saw is designed to perform a short cross-cut, and a circular one. for longitudinal.
The miter saw speed is almost always around 4500 rpm.
Saw blade speed can vary from 3000 to 4500 rpm.
The cutting depth of the miter saw, depending on the size of the disc, is from 40 to 130 mm, and the width, respectively, is from 70 to 363 mm.
The cutting depth of a circular saw, depending on the size of the blade, ranges from 40 to 100 mm, and the cutting width. respectively from 65 to 700 mm. Another useful property of the miter saw. you can work like a regular circular one, that is, make longitudinal cuts. This saw is called a combination saw.
Differences
A miter saw is a saw designed for repeated, fixed cuts of short lengths. It is a small mechanism with a moving electrical device that goes down at various angles and tilts.
Circular saw is a circular hand saw for sawing boards, both lengthwise and crosswise, can be fixed on the machine.
A circular saw has more power than a miter saw with a disc of the same diameter, because the miter saw is designed for short cross-cuts, and the circular saw is for ripping.
The miter saw speed is almost always around 4500 rpm.
Saw blade speed can vary from 3000 to 4500 rpm.
The cutting depth of the miter saw, depending on the size of the disc, is from 40 to 130 mm, and the width, respectively, is from 70 to 363 mm.
The cutting depth of a circular saw, depending on the size of the blade, is from 40 to 100 mm, and the cutting width is respectively from 65 to 700 mm. Another useful property of a miter saw is that you can work like a regular circular saw, that is, make rip cuts. This saw is called a combination saw.
The circular device depends on its type. In total, there are 2 basic designs of circulars:
Handheld devices consist of a housing with two handles, which houses an electric motor. A toothed saw blade is attached to the motor shaft. The part of the disc protruding from the body is covered by a casing. During sawing, the guard is pushed back by the workpiece. When the cut is complete, the guard is returned back by a spring.
The stationary saw has a table instead of a compact body. Mount the motor underneath so that part of the saw blade exits through the slot in the table top. In this case, the disk itself can be located both on the motor shaft, and be connected to it through a belt drive.
Saw blade design
It is a flat bed with an electric drive and a vertically mounted saw blade, as well as a saw holder (handle) with a power button. There are also auxiliary parts: sawdust collector, rulers and hinges, etc. The bed is pressed against the cut plane, and the rotating saw blade, plunging into the material, cuts it.
In terms of power, circular saws are divided into 3 categories.
- With an electric motor power up to 1.2 kW (for infrequent cutting of a simple, thin blade (up to 45 mm) with discs with a diameter of 130-160 mm).
- With a drive power of up to 1.8 kW (cutting depth up to 60 mm with discs up to 200 mm in diameter).
- With a power of 2.0 kW and more, with discs up to 350 mm in diameter for cutting even sheet metal and the ability to attach to a workbench, i.e. for more professional use.
Immersion in the material (for example, when cutting solid slabs), when the cutting wheel can move vertically, cutting is not done from the edge, but from the middle of the blade.
Adjusting the angular speed of the saw blade. This feature allows you to ensure smooth cuts on different materials.
Saw blade braking. Increases tool safety.
Smooth start, when the jerk is eliminated when the drive is turned on, especially powerful. It also increases safety and also reduces the mechanical stress on the saw blade.
Illumination and laser marking. Improves comfort and accuracy of processing.
Possibility of mounting on a bed (only for powerful circular saws). This option is very useful in case of large volumes of work.
Circular saw blades differ in tooth height, cutting profile and tooth frequency and are divided into 2 categories: for soft materials and for metal. The first ones have teeth inclined in the direction of rotation (positive sharpening angle), the second ones. with a negative sharpening angle.
Rules for the selection of saw blades.
- teeth are required for a precise and even (not ragged) cut in soft material.
- Fewer teeth allowed for hard material.
The use of a stationary circular saw makes it possible to perform the following types of work:
- Cutting out small slabs of sheet materials.
- Cutting boards, slats, beams.
- Quarter sampling.
- Make a thorn groove connection.
- Chamfer.
- Saw wood.
To do such an extensive amount of work on a circular table, in addition to a parallel stop, a number of other devices are required. At the same time, the functionality of the table largely depends on the size of its table top. If the material does not fit on it, then many types of work become overly difficult or almost impossible to do. In addition, since the workpiece needs to be lifted onto the table for cutting, two operators have to carry out work with large-sized sawn timber.
The table saw can be used to cut firewood. With its help, thin tree trunks and branches are cut into short logs. For these purposes, the cheapest tool is usually bought that does not support the functions of adjusting the disc offset, changing its angle.
Power selection
Power is one of the defining criteria when choosing a tool. However, when using a new sharpened saw blade, even with a low-power motor, it will be able to cut better than a powerful tool with worn out accessories. Thus, the lack of torque can be compensated for by consumables. You need to decide in advance. to overpay for a powerful circular once, or later to sharpen discs more often.
The circular saw with a motor up to 800 W can be used to cut plywood, thin slats and boards. Tools with 800-1200 W motors are the most versatile. It can easily cut almost any kind of lumber, but does it slowly when cutting thick workpieces. When choosing a tabletop circular, it is better to stay on a motor of 2 kW or more. In this case, it will have a power reserve for any type of work. At the same time, its weight does not matter, since the table is always in the workshop.
Differences between hand and stationary saws in terms of convenience and functionality
Portable hand-held and table-top stationary circular saws differ in ease of use when performing various types of work. For some tasks, one tool is preferable, and for others, another. Therefore, neither variety has a clear advantage over the other.
Conventionally, all circulars can be divided into 3 groups:
- Light. up to 40 mm.
- Medium. up to 65 mm.
- Heavy. typically up to 140 mm.
The tool of the middle class is the most versatile. It is suitable for those who are going to use it when building a house, making beehives, outdoor furniture, installing a wooden fence, etc. Circulars giving a cutting depth of more than 65 mm are professional tools for working with beams, logs, rounded beams, carriages and other building materials made of wood.
As for the angle of inclination of the disc, it can be changed arbitrarily in any indicator or in fixed steps of 90 °, 45 °, 30 °. It should be borne in mind that the cutting depth depends on the configured disc angle. It is maximum at an angle of 90 °. In most cases, changing the disc tilt is not required at all.
TOP 10 circular saws
A circular saw, or, more simply, a circular saw, is an absolutely indispensable device when working with wood, at a construction site or during repairs. She saws, she cuts, she cuts.
Miter Saw vs Circular Saw: Do you Really Need Both?
Circular machines are mandatory in every woodworking workshop, furniture or carpentry workshop. With their help, craftsmen “cut out” a rough workpiece. this is the most unpretentious purpose of a circular machine. A good quality unit is capable of not only such a primitive function. He should transform your workshop into a mini-mill for the production of furniture, windows, doors, flooring and other wood products.
- Be productive and tough. Work for a long time, without interruptions, breakdowns and defects;
- Meet the standards of safety and comfort at work;
- Ensure rig stability and sawing accuracy.
Buyers also highly appreciate the unit, which has been tested in practice, and its quality is fully consistent with the price. The TOP-10 of the best circular machines included only such models. In addition, they have a reliable and stable manufacturer, so you shouldn’t worry about service and post-warranty repairs.
Circular machine Scheppach (Workzone) HS 100 WZ
The German company Shepach produces inexpensive circular saws with excellent power and the ability to run smoothly. Scheppach HS 100 WZ. the best circular for the house, used for sawing wood and plastic. The machine performs rip and cross cuts, angle cuts. It works accurately and efficiently, so it is actively used in carpentry and furniture workshops. It is easy to operate, compact, weighs only 24 kg. Equipment class. semi-professional. The manufacturer has installed a sufficiently powerful electric drive. It is single-phase, power 2 kW. The cut is made with a disc equipped with 48 teeth. And also comes with another 65 teeth disc for a clean cut. The cutting blade is protected by a guard, which increases safety during work. The cutting head tilts at an angle of 45 degrees, right and left, which expands the capabilities of the machine. With a straight cut, the depth reaches 73 mm, with a cut at an angle of 45 degrees. 53 mm, depth adjustable. the cutting line is illuminated with a laser. The dimensions of the working table are 640×430 mm. The table is durable, metal, equipped with three extensions. on both sides and back, which increases its area. Dust and shavings are collected in a cloth bag. Installation on a four-legged stand for a stable, level surface.
- The electric motor can withstand long-term operation, since forced air cooling is involved;
- The set includes a stool-type stand on metal legs, which allows you to install the machine directly on the floor;
- Laser pointer accurately marks the line on the cut;
- The saw head has the ability to tilt, the depth is adjustable;
- The adjustable stop ensures the accuracy and quality of sawing;
- Robust thick metal work table with reamers on three sides for machining large workpieces.
Miter saw
What is a miter saw?
Cross-cut is a tool for precise, mainly cross-cutting, cutting of a workpiece. Most miter saws are small and portable. Unlike stationary miter saws, you can pull it out and set it on a temporary base by placing a drop mechanism (sometimes called drip) over your workpiece. Blade sizes most commonly used for miter saws range from 8 to 12 inches (20-30 cm).
What is a miter saw used for??
You can use it to create cross cuts on a workpiece in one quick motion. But more importantly, you can do it at your chosen angle. It is the best choice when you need to cut planks and moldings.
pros
The miter saw is useful when you need precise cross-cuts in your workpieces. This saw is also a great option for miter cuts.
This is one of the main competitive advantages of this saw over other types of saws. Most importantly, the miter saw is one of the safest.
Minuses
Despite all the advantages, a miter saw is useless when you are about to cut large workpieces. While it is the best choice for cross-sections, trimming can be ineffective with long cuts (over 15 centimeters).
Miter saws are more of a luxury than a necessity.
Circular saw or miter saw. which one to choose?
You want to make a nice table to match your couch, but can’t decide between a miter saw and a circular saw?
Don’t worry, read our comparison guide to find out all the differences between the two saws and decide which one is the best for your task.
Some people think that one of them is better than the other, others that there is not much difference between them, and one can replace one saw with another. Nevertheless, each of them has its own characteristics and it is better to use the saw precisely for its intended purpose.
So let’s first take a quick look at the advantages and disadvantages of both types of saws.
A circular saw
Also called circular saw, this saw is equipped with a toothed or abrasive disc that allows you to cut various materials in a rotary motion, moving around an axis.
What is a circular saw used for?
The circular saw is commonly used in a variety of woodworking projects. However, the cutting tasks depend to a large extent on the type of blade that is mounted on the circular saw. This saw can be produced both for the left and for the right hand. During operation, the circular is largely based on the part of the structure in which the engine is located.
pros
Circular saws are very compact, making them easy to move. Usually, you transfer the circular saw to the workpiece, and conversely, in the case of miter saws, you take the material where the saw is already installed.
These saws are capable of making long rip cuts.
Minuses
This type of saw is much more difficult to use than a miter saw. A circular saw requires more skill and a lot of experience is required to use it.
From a safety standpoint, a miter saw is a better choice than a circular.
Circular saw: selection features
A circular or circular saw is designed to work with wood and other materials. With the help of a disc with cutters mounted on the body, sawing is performed at high speeds. There are different types of circular saws, which also include angle cutters.
The circular saw allows you to make a neat, even cut in wood or large plywood sheets. This is especially convenient when it is not possible to use special sawing tables.
There are two types of portable circular saws: left-handed and right-handed, which can be connected to the mains or run on battery power. When choosing a circular, you need to pay attention to the following points.
An important factor is the weight of the hand-held circular saw. The weight of different models can vary from three to six kilograms. The battery adds extra weight to wireless devices. Therefore, when buying a tool, you should hold the saw in your hands for a while in order to feel its mass. For simple household chores, a 15 amp wired model will suffice, the cost of which can be under 100.
When choosing a tool, you need to take into account the size of the blade, on which the depth of immersion in the wood depends. The larger the blade size of the circular saw, the deeper the cut can be made. The shallow blade is easier to maneuver, but the size of the material to be cut must always be taken into account.
Many models have a feature that allows you to change the angle of the blade to cut at different angles. For more accurate work, you will need a circular saw that has a goniometer on which each degree will be marked.
The position of the motor plays an important role in the selection of the tool. For chain-driven saws, the motor is positioned flush with the blade, while for band saws the motor is positioned away from the blade. The chain-driven device is more powerful and can cut bulky wood, stones and even concrete. The disadvantage of this type is its high cost and heavy weight. If the plans do not include working with metal and other similar materials, then a regular circular saw is completely suitable.
When making a purchase, you need to look for additional features. These include dust collector, laser pointer, emergency lock. It is necessary to compare several models, hold them in your hands, check the switch, look at the maneuverability of the tool, try to adjust the blade.
Right-handed saws are considered more camphor in work, they easily slide on the working surface and do not have much weight.
Circular saw, stationary hacksaw use a blade. For circulars, these components differ in the material from which they are made and in diameter. It is best to use a set of different blades.
Working with a circular saw is hazardous. Therefore, you should follow the safety rules and take measures to protect the eyes.
What to choose: jigsaw or circular saw?
The volume and nature of the upcoming work will help to determine the choice of the preferable option. For example, if you are a novice carpenter or the amount of work does not involve much effort and long time, then it will be enough to purchase a jigsaw. It can easily cope with cutting not only chipboard and plywood, but can also be used for sawing small boards.
For larger jobs, when it is supposed to cut for a long time and in large volumes, it is better to choose a circular saw. It can be used to cut sheet wood material, rather thick boards and bars.
disadvantages
- Cannot make a contoured cut or start a cut from the middle of the sheet material
- Massiveness
- Debt saw blade replacement
Differences in work and features
The jigsaw cuts the material due to the reciprocating movements of the saw, which should be selected according to the work ahead. Some tools allow you to tune back and forth vibrations to achieve less blade overheating and a smoother cut. The jigsaw allows you to cut both vertically and at an angle, and the thickness of the material that can be cut directly depends on the length of the saw.
The circular saw cuts with a toothed blade. It is necessary to hold this tool with two hands, unlike the previous one. Most manufacturers of circular saws provide the ability to mount the tool with the blade upwards, thereby converting it into a small machine. The cut can be made both perpendicular to the plane of the material, and at various angles. The cutting depth is adjusted by moving the position of the saw platform and usually does not exceed 85 millimeters.
Before purchasing one of these tools, it will not be superfluous to familiarize yourself with their most significant advantages and disadvantages.
The advantages of the circular saw
- Long disk life
- Ideal for material handling where long slits or cross-sections are required
- Ability to carry out large volumes of work without having to stop to cool down
- Significant increase in productivity due to the ability to mount the saw blade upward
Which is better jigsaw or circular saw
Good day. To decorate a bath with wooden clapboard, I will need to choose a tool for this work that will not require large purchase costs. Advise what to choose and what makes it more convenient to work, with a manual circular or a jigsaw, since the lining is not very massive, you will have to cut it with care?
Good day. If you need to cut a large molded lining on a flat, it is better, of course, to choose a circular saw. If you mean curly or miter sawing, then a jigsaw. Happy repair!
[quote] Good day. If you need to cut a large molded lining on a flat, it is better, of course, to choose a circular saw. If you mean curly or miter sawing, then a jigsaw. Successful repair! [/ Quote] Good evening, I agree with Dmitry’s opinion! I just want to add if you are going to buy an electric tool, then choose a high-quality and well-known brand, I recommend a Makita, use only these tools and not immediately criticize him, it concerns a jigsaw, about a circular I can’t advise because I don’t have it in my inventory!!
in general, a good hacksaw is used for the perfect support. and the rest is for firewood
I support Paul’s opinion! In terms of price and quality ratio, MAKITA is an excellent tool. The most complete arsenal of this company. As for the opinion of Yuri and agree with him. If you need to adjust products with an accuracy of fractions of a millimeter, then you cannot do without a fine-toothed hardened hacksaw. As well as processing with an electric plane, a grinder and sometimes a milling cutter! Joke. But is it worth it to be so pedantic when facing a bath? :: smile7 ::
Hello. I almost forgot! An important factor is also the selection of consumables for the tool! If a circular, then a saw blade, if a jigsaw, then a saw blade. Initially, when buying, standard consumables are not of high quality.
We usually use a miter saw to work with clapboard. The price is comparable to a circular saw.
[quote] We usually use a miter saw to work with clapboard. The price is comparable to a circular saw. [/ Quote] My friend. And how do you use trimming along the cut? )))
Good day!
No experience with the specified tool.
Can you tell me which is better to take a circular saw or jigsaw? It is taken mainly to fit door trims and euro lining.
I understand correctly that for sawing along the platbands with a jigsaw, due to lack of experience, it will not be possible to achieve a straight mowing line on long cuts?
2Andrey Kr While looking for a search, I will say that if the cuts are only straight and do not plan any carpentry work in the future, then a circular, otherwise both
well, plus trimming.
thank
Looked at the forum.
(I didn’t immediately realize that it’s better to look for a “circular” in the search. Therefore, I asked a question)
In general terms, it became clear.
Skobar wrote:
A circular saw for large jobs. quite heavy. noisy, dangerous.
The screwdriver is also dangerous, you can poke it in the eye.
WEREG wrote:
The screwdriver is also dangerous, you can poke it in the eye.
And drop a sledgehammer or a hammer on your leg, or give yourself a finger
What are you laughing at? A jigsaw is really safer than a circular saw. Circular and angle grinders are generally the most dangerous tools and require _increased_ care and attention.
Of course, all TB must be strictly observed. Only the consequences of their violation with different instruments are different.
Solovushka wrote:
Che are laughing then?
Of course I laugh Only once when I chopped wood with a cleaver and missed the log, hitting my leg, I was not funny
Solovushka wrote:
A jigsaw is really safer than a circular saw. Circular and angle grinders are generally the most dangerous tools and require _increased_ care and attention.
So no one argues that the jigsaw is safer. And it is more versatile. And besides the circular and the angle grinder, there is also a chainsaw, which is also very dangerous. Although if you adhere to TB and the operating instructions, nothing will happen. For example, I would gladly observe TB all the time, but it does not work
I think that one cannot replace the other.
The budget, however, will not allow taking both.
I still can’t make up my mind.
For some reason it seems to me that the circular in the house is more useful. I can’t think of why I would start cutting out curved workpieces. The main work is still straight cuts, but here circular is preferable.
Andrey Kr wrote:
For some reason it seems to me that the circular in the house is more useful. I can’t think of why I would start cutting out curved workpieces.
The fact that in the absence of a tool, a circular is first of all needed is indisputable. But do not give up on a jigsaw, they can do a lot of things both for wood and plastic and metal. I would prioritize the following: 1. circular, 2. plane, 3. jigsaw. Grinder screwdrivers, etc. already according to needs. And they grow
Techred wrote:
I believe that one cannot replace the other.
This is certainly correct. But if long straight cuts are planned, then of course a circular, although the jigsaw is more versatile.
go wrote:
I would prioritize 1. circular, 2. plane, 3. jigsaw.
I agree that you should take the circular first.
That’s for sure
Circular saws in the apartment. some kind of sadism. I say, a jigsaw is a universal tool and basically everyone is sawing in a straight line, although it is called a jigsaw, in fact it is a mechanical hacksaw A child can also saw a jigsaw, just give it, but with a circular fig.
In addition, if you cut 50mm boards, or cut a poporek, you need a wild saw, if you clap a wall with a clapboard, then a jigsaw is better, but God himself ordered the wood to be cut with a chainsaw. But according to the experience of working in the country, the jigsaw is one of the most demanded tools, like USHIM, a drill.
Andrey Kr wrote:
For some reason, it seems to me that the circular in the house is more useful.
It depends on what is meant by the word “house”, if an apartment, then a jigsaw is better.
Skobar wrote:
Circular saws in the apartment. some kind of sadism.
In relation to whom? To yourself or to your neighbors? I worked as Rebir in the apartment, whoever heard how she works will understand
agrey wrote:
It depends on what is meant by the word “house”, if an apartment, then a jigsaw is better.
The jigsaw, as I said, is more universal, but it is not suitable for straight cuts.
Skobar wrote:
if clapboard sheathing the wall, then a jigsaw is better,
Better trimming
What is it?
Table Saw vs Miter Saw vs Circular Saw Basics | How to Choose a Type of Saw | This or That DIY
veers wrote:
The jigsaw, as I said, is more universal, but it is not suitable for straight cuts.
Let him explain this to the neighbors.
agrey wrote:
Let him explain this to the neighbors.
If you go out with a working circular and wave it in front of their noses, I think they will understand
Hello.
It is worth buying a Makita jigsaw or a Makita circular saw.
Dear forum users, I am interested in your opinion, what is better, what is more practical, what is more versatile in use?
WHAT IS BETTER TO BUY.
since the author did not voice the work IMHO jigsaw
Anatoly77 wrote:
It is worth buying a Makita jigsaw or a Makita circular saw.
Dear forum users, I am interested in your opinion, what is better, what is more practical, what is more versatile in use?
WHAT IS BETTER TO BUY.
well, if, for example, we are talking about how to quickly and quickly chop 5 kilograms of sausage into pieces in the garage, then the jigsaw will probably be more comfortable. But if the task is to bring neighbors to a heart attack with loud sounds at 4 o’clock in the morning. then there is no way without a circular
- Has been discussed many times on the forum, go through the search.
- The jigsaw is somewhat safer, it allows you to make curves of the mowing line. Straight lines come with dances (good guides are needed, thick files, etc.), has problems with the perpendicularity of the end to the edge (takes the file away) on thick (well, somewhere from 30 mm) parts
- A small advantage of a jigsaw is that the upper and lower cutting points in the material are one above the other. Well, for example, you wanted to make a corner cutout. with a jigsaw without problems, and you will have to finish a little with a circular saw.
- The jigsaw is more convenient and safer when it comes to fitting, when you need to file right in place, not on the desktop. Again, point 3 is important here.
A jigsaw is much more convenient and safer when working with small parts, cuts, say up to 10 cm long, small samples, say you need to cut a square hole 5 × 5 cm (well, 10 × 10) for an outlet, for example. a jigsaw will cope, the circular is no longer there ( her disk simply won’t fit there)
So. if there are no complex curved edges, for example, furniture ones, and the tasks are more construction, then circular. If you want to make a lot of tricky beautiful furniture or there will be a lot of different adjusting / finishing work. then a jigsaw. In principle, if you have a milling cutter, then infrequent curved figures can be done without a jigsaw. only with a milling cutter and a circular.
When choosing a tool that will be used on the farm for cutting various materials and replace the usual hacksaw, you often have to choose one thing between a circular saw and a jigsaw. To determine which tool is best for you, you need to understand what are the fundamental differences between the two devices.
disadvantages
- Overheating of the file leads to a significant deterioration in the quality of the cut and the appearance of a slight waviness of the cut
- Cannot set cutting depth
- Rapid wear of the files
The advantages of a jigsaw
- Small and lightweight for one-handed use
- Quick file change
- The ability to make cuts from any area of the material, pre-drilling a hole
- The ability to cut out various shapes
Circular saw: price, characteristics
The circular electric saw is also called parquet, or circular, it appeared in the twenties of the XX century.
Tool characteristics by disc diameter
If you choose a circular electric saw, then it is especially important to pay attention to this parameter. It is one of the most important features of the saw. The larger the disc, the more powerful the engine must be in order to spin it up to the required speed. The more torque will be needed to maintain speed without jamming. An increase in all of the above parameters will entail the need to increase a more technologically advanced stabilization system, this will exclude vibration, beating and noise. Consequently, the instrument will be heavier. But for sawing large equipment, these characteristics are simply necessary, in some cases there is a need to process more massive workpieces.
Disk rotation speed
An electric hand-held circular saw should also be selected depending on the speed of rotation of the blade. The faster the shaft moves, the cleaner you can get the cut. Besides that, high speed. it is the opposite of torque. This parameter also indicates the temperature, but some plastics can deform and melt during sawing. If the rotational speed turned out to be a stumbling block, then it is necessary to compare tools with the same diameter of the working element. Experts advise to select a model that provides for the possibility of adjusting the idle frequency.
Key Features
Today this equipment is very common among consumers, and if you decide to choose such a tool for yourself, you should pay special attention to the main characteristics of the device. The circular acts as one of the most complex units in technical performance, which is true, even if you do not take into account the moment that it can have a complete set of electronic add-ons. In the process of work, the master will have to ensure his safety, which is additionally taken care of by the manufacturer. As practice shows, parquet floors can be very traumatic, therefore, it is not worthwhile to carry out self-repair of this equipment, it is best to entrust this business to professionals.
Submersible circular characteristics
If you need an electric circular saw, then you should pay attention to the fact that there is a submersible version of it on sale. It is intended for insertion into the part anywhere in it. Thus, you can process the element, not only starting from the edge. Such equipment does not have an automatic bottom cover, while the disc is located above the base plate. It goes down only when you press the start button of the device. The master can adjust the depth of cut, while the range changes with millimeter precision. An electric circular saw, which has a plunge-cut mechanism, is compared in principle with a wall chaser. With the help of the submersible mechanism, you can carry out local repair of the roofing, cut an opening in the countertop or dismantle floorboards. Without much effort, the master will be able to make grooves, grooves and cracks. If you are faced with the task of processing laminated materials or sandwich panels, then you will need to cut the top layer with a preliminary pass to a certain depth of the workpiece, thereby eliminating the risk of chipping. This is possible if the working part of the tool is positioned perpendicular to the plane of the part. Among other things, you can work at a certain angle.
Mechanical characteristics
Power characteristics
The circular electric saw, will have a certain power. Experts advise purchasing a device with some margin of this parameter. When comparing two models with the same cutting depth, remember that a more powerful motor will provide high stability and trouble-free operation for a long time. Among other things, the owner of such a device will quickly cut the densest material. Power is related to the diameter of the tooling, in this regard, the units can be attributed to one of three corresponding classes. Less powerful ones have the mentioned parameter, which does not exceed 800 watts. As for the models of average power, they are characterized by a limit of 800 to 1200 watts. Professional models are characterized by 1200 watts and more, they are rarely used to solve problems in everyday life.
The advantages of a jigsaw
- Small and lightweight for one-handed use
- Quick file change
- The ability to make cuts from any area of the material, pre-drilling a hole
- The ability to cut out various shapes
Jigsaw or circular saw. What to choose?
When choosing a tool that will be used on the farm for cutting various materials and replace the usual hacksaw, you often have to choose one thing between a circular saw and a jigsaw. To determine which tool is best for you, you need to understand what are the fundamental differences between the two devices.
disadvantages
- Cannot make a contoured cut or start a cut from the middle of the sheet material
- Massiveness
- Debt saw blade replacement
disadvantages
- Overheating of the file leads to a significant deterioration in the quality of the cut and the appearance of a slight waviness of the cut
- Cannot set cutting depth
- Rapid wear of the files
What to choose: jigsaw or circular saw?
The volume and nature of the upcoming work will help to determine the choice of the preferable option. For example, if you are a novice carpenter or the amount of work does not involve much effort and long time, then it will be enough to purchase a jigsaw. It can easily cope with cutting not only chipboard and plywood, but can also be used for sawing small boards.
For larger jobs, when it is supposed to cut for a long time and in large volumes, it is better to choose a circular saw. It can be used to cut sheet wood material, rather thick boards and bars.
The advantages of the circular saw
- Long disk life
- Ideal for material handling where long slits or cross-sections are required
- Ability to carry out large volumes of work without having to stop to cool down
- Significant increase in productivity due to the ability to mount the saw blade upward
Differences in work and features
The jigsaw cuts the material due to the reciprocating movements of the saw, which should be selected according to the work ahead. Some tools allow you to tune back and forth vibrations to achieve less blade overheating and a smoother cut. The jigsaw allows you to cut both vertically and at an angle, and the thickness of the material that can be cut directly depends on the length of the saw.
The circular saw cuts with a toothed blade. It is necessary to hold this tool with two hands, unlike the previous one. Most manufacturers of circular saws provide the ability to mount the tool with the blade upwards, thereby converting it into a small machine. The cut can be made both perpendicular to the plane of the material, and at various angles. The cutting depth is adjusted by moving the position of the saw platform and usually does not exceed 85 millimeters.
Before purchasing one of these tools, it will not be superfluous to familiarize yourself with their most significant advantages and disadvantages.