Which Knife Is Best For A Trimmer

Trimmer knife: when to use and which one to choose?

Using a trimmer in summer cottages and household plots greatly simplifies and speeds up the mowing of grass. However, it is important to choose the right “consumable” for the Electric Trimmer. Simply put, what exactly you will mow the grass: with a cord (special trimmer line) or with a knife. Both the fishing line and the knife are equally well suited for mowing grass in hard-to-reach places, but in which cases the knife is more effective?

Which Knife Is Best For A Trimmer

When to use a trimmer knife?

Most often, it is the fishing line that is used, since it is safer to use and provides almost the same result when mowing the grass. But if you have to cut tall enough grass, you will inevitably run into the fact that the long stems will wrap around the spool or spindle where the trimmer head is attached. To avoid this, it is recommended to use a cutter knife for the trimmer.

The tiller will also be more effective when you need to cut dry grass, shrubs, burdocks, nettles or hogweed. The only thing a knife can be afraid of is collisions with a stone.

The trimmer knife can be made of both plastic and metal. Each trimmer model is initially supplied (or offered by the manufacturer) its own type of knife. This is due to the shape of the trimmer bar and is done in order to maximize the safety of the user. Therefore, it is not necessary to take a metal knife if your trimmer model involves the use of a plastic one. Even if you are assured of the versatility of the knife.

A trimmer knife can look like a special mowing (trimmer) head with schematic plastic blades, or be a one-piece design, for example, a circular knife with a different number of blades (as a rule, such models are made of metal).

A trimmer with a metal knife will help to get rid of Not only grass, but also bushes or young trees. You can also trim raspberries and currants with a trimmer.

Basic safety rules when using metal trimmer knives

The metal trimmer blade is only suitable for straight-bar units. This is due to the design features of the tool. When, when mowing grass (bushes, thin trees), the disc hits an obstacle (usually a stone), it most often bounces back towards the user. In trimmers with a straight bar, the distance from the head to the legs of a person is quite safe.

Also, such trimmers are held by the user using T (U) or J-shaped handles, and if the handle is D (O) shaped, then a special limit bar is included with it, which rests on the leg and makes it closer to the cutting tool.

If your knife becomes bent when hitting an obstacle, do not rush to replace it. You can level it yourself with a hammer. The flexibility of the knives is designed to reduce stress on the engine and transmission.

Is the shape of the knife blades important??

The experience of professionals and ordinary users has shown that the shape of the blade matters only if you are cutting grass for harvesting for the winter, such as hay for animals, since three and four-blade knives chop the grass too much. But the quality and speed of the oblique with different blades do not differ significantly.

The most popular trimmer knife is the round shape with eight teeth around the circumference. Also, its variety is often used: with four large teeth and small ones between them.

And for beveling shrubs (raspberries, currants) and thin young trees, they most often use an ordinary knife in the form of a disc with many teeth. It can be installed on any trimmer, even with low power, and effectively treat the area.

Trimmer knife: when to use and which one to choose?

Using a trimmer in summer cottages and household plots greatly simplifies and speeds up the mowing of grass. However, it is important to choose the right “consumable” for the Electric Trimmer. Simply put, what exactly you will mow the grass: with a cord (special trimmer line) or with a knife. Both the fishing line and the knife are equally well suited for mowing grass in hard-to-reach places, but in which cases the knife is more effective?

When to use a trimmer knife?

Most often, it is the fishing line that is used, since it is safer to use and provides almost the same result when mowing the grass. But if you have to cut tall enough grass, you will inevitably run into the fact that the long stems will wrap around the spool or spindle where the trimmer head is attached. To avoid this, it is recommended to use a cutter knife for the trimmer.

The tiller will also be more effective when you need to cut dry grass, shrubs, burdocks, nettles or hogweed. The only thing a knife can be afraid of is collisions with a stone.

The trimmer knife can be made of both plastic and metal. Each trimmer model is initially supplied (or offered by the manufacturer) its own type of knife. This is due to the shape of the trimmer bar and is done in order to maximize the safety of the user. Therefore, it is not necessary to take a metal knife if your trimmer model involves the use of a plastic one. Even if you are assured of the versatility of the knife.

A trimmer knife can look like a special mowing (trimmer) head with schematic plastic blades, or be a one-piece design, for example, a circular knife with a different number of blades (as a rule, such models are made of metal).

A trimmer with a metal knife will help to get rid of Not only grass, but also bushes or young trees. You can also trim raspberries and currants with a trimmer.

Basic safety rules when using metal trimmer knives

The metal trimmer blade is only suitable for straight-bar units. This is due to the design features of the tool. When, when mowing grass (bushes, thin trees), the disc hits an obstacle (usually a stone), it most often bounces back towards the user. In trimmers with a straight bar, the distance from the head to the legs of a person is quite safe.

Also, such trimmers are held by the user using T (U) or J-shaped handles, and if the handle is D (O) shaped, then a special limit bar is included with it, which rests on the leg and makes it closer to the cutting tool.

If your knife becomes bent when hitting an obstacle, do not rush to replace it. You can level it yourself with a hammer. The flexibility of the knives is designed to reduce stress on the engine and transmission.

Is the shape of the knife blades important??

The experience of professionals and ordinary users has shown that the shape of the blade matters only if you are cutting grass for harvesting for the winter, such as hay for animals, since three and four-blade knives chop the grass too much. But the quality and speed of the oblique with different blades do not differ significantly.

The most popular trimmer knife is the round shape with eight teeth around the circumference. Also, its variety is often used: with four large teeth and small ones between them.

And for beveling shrubs (raspberries, currants) and thin young trees, they most often use an ordinary knife in the form of a disc with many teeth. It can be installed on any trimmer, even with low power, and effectively treat the area.

Trimmer knife: when to use and which one to choose?

Using a trimmer in summer cottages and household plots greatly simplifies and speeds up the mowing of grass. However, it is important to choose the right “consumable” for the Electric Trimmer. Simply put, what exactly you will mow the grass: with a cord (special trimmer line) or with a knife. Both the fishing line and the knife are equally well suited for mowing grass in hard-to-reach places, but in which cases the knife is more effective?

When to use a trimmer knife?

Most often, it is the fishing line that is used, since it is safer to use and provides almost the same result when mowing the grass. But if you have to cut tall enough grass, you will inevitably run into the fact that the long stems will wrap around the spool or spindle where the trimmer head is attached. To avoid this, it is recommended to use a cutter knife for the trimmer.

The tiller will also be more effective when you need to cut dry grass, shrubs, burdocks, nettles or hogweed. The only thing a knife can be afraid of is collisions with a stone.

The trimmer knife can be made of both plastic and metal. Each trimmer model is initially supplied (or offered by the manufacturer) its own type of knife. This is due to the shape of the trimmer bar and is done in order to maximize the safety of the user. Therefore, it is not necessary to take a metal knife if your trimmer model involves the use of a plastic one. Even if you are assured of the versatility of the knife.

A trimmer knife can look like a special mowing (trimmer) head with schematic plastic blades, or be a one-piece design, for example, a circular knife with a different number of blades (as a rule, such models are made of metal).

A trimmer with a metal knife will help to get rid of Not only grass, but also bushes or young trees. You can also trim raspberries and currants with a trimmer.

Basic safety rules when using metal trimmer knives

The metal trimmer blade is only suitable for straight-bar units. This is due to the design features of the tool. When, when mowing grass (bushes, thin trees), the disc hits an obstacle (usually a stone), it most often bounces back towards the user. In trimmers with a straight bar, the distance from the head to the legs of a person is quite safe.

Also, such trimmers are held by the user using T (U) or J-shaped handles, and if the handle is D (O) shaped, then a special limit bar is included with it, which rests on the leg and makes it closer to the cutting tool.

If your knife becomes bent when hitting an obstacle, do not rush to replace it. You can level it yourself with a hammer. The flexibility of the knives is designed to reduce stress on the engine and transmission.

Is the shape of the knife blades important??

The experience of professionals and ordinary users has shown that the shape of the blade matters only if you are cutting grass for harvesting for the winter, such as hay for animals, since three and four-blade knives chop the grass too much. But the quality and speed of the oblique with different blades do not differ significantly.

The most popular trimmer knife is the round shape with eight teeth around the circumference. Also, its variety is often used: with four large teeth and small ones between them.

And for beveling shrubs (raspberries, currants) and thin young trees, they most often use an ordinary knife in the form of a disc with many teeth. It can be installed on any trimmer, even with low power, and effectively treat the area.

Vitals Master EZT 144vrs

Electric scythe Vitals Master EZT 144vrs is intended for cleaning lawns, as well as mowing grass where a normal scythe does not go: around trees, flower beds, between fences, on a lawn with an uneven surface. The spit has an electric motor with a power of 1400 W. This electric tool is very comfortable to start. It is equipped with a soft start function, with which the unit turns on without jerking. The engine runs on a Belt drive, which does NOT make unnecessary noise during the operation of the scythe and does NOT create strong vibrations. The Vitals Master EZT 144vrs electric trimmer has many advantages, including the fact that the rotor and stator of the electric motor are wrapped in copper, which provides the device with durability and durability. In the complete set you will find a belt with which the scythe is put on the shoulder and a knife with three teeth for mowing vegetation. The line spool must be purchased separately. Depending on the hardness and size of the vegetation, choose either a three-pronged knife (mows 255 mm) or a spool with line (designed for cutting plants with a diameter of 420 mm). The shoulder strap is adjustable to suit the height of the person, while it can be detached separately from the braid. After adjustment, the belt is very easy and quick to attach to the mowing device.

  • High-quality material for the manufacture of the rotor and stator windings, as well as the housing, rod and handle as a whole. This is a guarantee of a long service life;
  • Smooth, jerk-free start-up prolongs the operation of the unit and simplifies the load on human hands;
  • The powerful motor makes it possible to change nozzles and use a knife for cutting weeds;
  • Bicycle handles provide a firm grip and comfortable control, designed for cutting vegetation of different sizes;
  • When working, the tool is convenient and simple, and does not create unnecessary noise and vibrations.

Hyundai GC 1400

  • Heavy duty motor for demanding tasks;
  • Bicycle handle. Design like lawn mowers;
  • Due to the top-mounted engine, dust and moisture does NOT enter the engine through the air grids;
  • Collapsible design;
  • Smooth start;
  • Large width Mowing in one pass.

AL-KO GTE 550 Premium

If you need to clear an area of ​​overgrowth where a normal scythe will not pass, the AL-KO GTE 550 Premium trimmer will handle this task with ease. The unit of this type is designed to destroy vegetation between trees, under a bench, along fences and walls. This type of technique is very easy to use. The presence of a rotary handle and a bar allows you to adjust the braid so that it is easy to hold it during operation. To prevent trees from being damaged during mowing, especially for young seedlings, a special bracket and a wheel that moves in different directions are mounted in the trimmer. The unit is equipped with a powerful engine, which operates at a load of 550 kW. In one approach, the scythe mows up to 30 cm of grass, which allows you to clear a large amount of area in a short time. Cutting, the main part meets the semi-automatic cutting head with double nylon line. The head can be adjusted by means of which the electric trimmer gets to places where it is NOT possible to reach with a regular scythe. There are many advantages to this trimmer on the electric motor. Its motor, unlike other similar devices, is located on top. This provides it with protection from impacts during operation of the unit, which affects the rock and its duration. Another important advantage is an affordable price and convenient transportation.

  • The uniqueness of the design, which lies in the ability of the scythe to work in narrow and hard-to-reach places;
  • The proprietary AL-KO electric motor has a continuous operation with minimal electricity consumption;
  • It is possible to clean areas of large volumes in a short time due to the head with a double line;
  • Low weight of 3 kg ensures ease of use and reduces stress on the user’s hands.

AL-KO BC 1200 E

AL-KO models in the top three are already an unbreakable tradition. The reason is the high quality of the equipment and the very meager% of hits on the service. This German electric trimmer can be safely called the most reliable trimmer to date. She’s just unkillable. The average service life is 5 years without any service. These are verified statistics. In the model, all the characteristics show premium quality: 2 speeds of mowing, motor overload protection, soft start function, light and durable aluminum rod. As practice shows, the engine power is 1.2 kW. The most optimal trimmer. This motor handles most vegetation without overloading. over, it is light in weight and quite hardy. The only negative is the high price. It is at the level of gasoline models. Unfortunately, impeccable quality is not affordable for everyone. But who appreciate a reliable manufacturer, this trimmer is for them.

  • The lowest percentage of users’ calls to service centers;
  • Has established itself as the most reliable grass trimmer;
  • Two-speed;
  • High-quality copper-wound electric motor;
  • Drive from engine to gearbox. Steel forged shaft;
  • Includes weed cutting knife.

TOP 10: rating of the best trimmers

  • They serve for a long time and DO NOT break;
  • They have good power combined with a low price;
  • They have an optimal set of functions.

Iron Angel ETR 1400

The Dutch electric trimmer Iron Angel ETR 1400 is designed for quick and thorough clearing of garden and suburban areas from vegetation. The manufacturer of the machine from the Netherlands offers two attachments to choose from: a knife for cutting grass with a diameter of 25.5 cm and a line for vegetation NOT more than 38 cm. The motor power is 1400 W, the total weight is 7 kg. The motor starts smoothly without generating unnecessary noise and vibration. Depending on the nozzle, the electric scythe makes from 4800 to 6300 rpm. A metal shaft acts as a drive. In addition, the parts of the electric trimmer are a handle with a D-shape, a shoulder strap, a steel, collapsible straight bar. As for the motor, it is on top. This kind of arrangement protects it from accidental blows to the root or hard object, which increases the life of the braid. The Iron Angel ETR 1400 Electric Trimmer has advantages not only in motor power, but also in that the motor is equipped with a thermal protection function that protects the device from overloading and overheating. In addition, the device has an additional handle, which makes it more convenient to use. Leading units are lubricated automatically.

  • Robust construction and wear-resistant, stainless material of the body and drive shaft ensure long-term use of the tool without any repairs;
  • Ease of use and comfortable grip handle make the tool lightweight and trouble-free in work;
  • Engine power of 1.4 kW in combination with a steel shaft makes it possible not only to mow with a fishing line, but also to cut off hard growth with a sharp knife;
  • Equipped with an air flow cooling system protects the equipment from overheating in case of prolonged operation;
  • Efficiency is noted, which consists in prolonged operation of the engine while consuming a small amount of energy.

Top brands of electric trimmers

These are the most reliable trimmers ever and they are the best sellers by right. We have selected for you the TOP-ten of the best models. the best-selling trimmers of 2019.

Hyundai GC 550

If you need to clear areas for an even and smooth cut, then Hyundai’s GC 550 Electric Trimmer is just what you need. This model is equipped with a powerful, improved motor that doubles the speed of the rotating block compared to other models, thereby improving productivity. The engine power is 700 W, at which it makes up to 1000 rpm. The electric trimmer Hyundai GC 550 also has advantages in heat dissipation, since a special system is built into the device, which is responsible for cooling the engine in case of overheating. There is also an automatic thermal protection that turns off the unit in case of overload. The cutting element is a head with a semi-automatic line feed. The length of the line is 6 meters, the diameter is 1.6 mm, which allows it to mow 300 mm of grass in one fell swoop, while not damaging the stems of plants. The handle of the scythe is adjustable, which makes it possible to lengthen the handle and, thus, reach hard-to-reach places. To make it comfortable to hold the scythe during work, there are pads for the handles made of durable, wear-resistant rubber. The unit also features a push button injury protection that protects the engine from accidental starting. Also, using the adjusting device, you can adjust the rotation of the head in any direction. The D-shaped handle, which makes it easier and more comfortable to use, helps to adjust the width of the attempt and the angle of rotation of the trimmer head. The built-in wheel helps to bring the tool to the place of work, which can also be used as additional support.

  • High productivity thanks to the 700 W motor and high-tech cutting head;
  • Hyundai manufacturer used high quality materials, which provide the unit with strength and durability;
  • Due to its low weight, the yak is 2.9 kg, the scythe is easily transferred, and the transport wheel allows it to be transported around the site;
  • Smooth start relieves the load on the hands and protects from jerking at the start;
  • The trimmer adjuster head penetrates into hard-to-reach areas for full cleaning.
Grass Trimmer , , ,