Which Lugs Are Best For The Tiller

Potato planter

The next attachment in demand is the potato planter. It has the following characteristics:

  • Fruit tank capacity. up to 50 kg;
  • The permissible fruit diameter is 4 to 6 cm;
  • Total weight. 41 kg;
  • The distance between the planted fruits is from 19 to 28 cm, or from 25 to 35 cm (depending on the model).

.

How to attach

Attaching attachments to the Salute tiller is quite simple if you know the principle of the unit design itself. For example, the plow and hillers are connected to the tiller through the Gryadil S-13 and the C-20 bracket, through a universal coupling for the tiller.

Tiller plow

However, the main purpose of the Salute tillers is to work on the ground, plowing and hilling various plantings. For THESE purposes, you can purchase a plow for a tiller, which plows the soil with high quality on the ground. There are two types. conventional and reversible plows.

.

Functions

Lugs are made as universal, suitable for any brands of tilers, and specially adapted for a specific model. Some people manage to make such attachments on their own, Using old disks from the machine as a basis, however, the cost of such an assembly is more expensive than if it was purchased ready-made. Lugs are necessary, first of all, to:

  • To improve the quality of adhesion of the tiller to the soil on which you have to move;
  • The increase in the weight of the equipment, due to which it becomes more stable and can be used without fear on uneven surfaces, even when using a second heavy attachment;
  • With lugs provides additional soil processing;
  • the tiller can easily move uphill on soft ground.

Which Lugs Are Best For The Tiller

To make the tiller as functional as possible, you need to purchase a model of attachments specifically for it. In this case, the unit becomes more efficient and economical. Sometimes lugs are supplied on sale, which are made of light alloy, their use on lightweight tillers is impractical, since the total weight should be above average. Higher quality, heavy ones are more expensive for the consumer, but they fully fulfill the assigned tasks.

the tiller is becoming an increasingly common technical tool that helps to perform a fairly large scope of work, typical for rural areas. This is quite understandable, because doing all this manually is quite problematic, especially for people of old age.

However, it should be noted that the tiller itself may not be enough for certain specific agricultural work. Then you should pay attention to additional attachments that are aggregated with Salute tillers and not only.

Dimensions

Speaking about the size of the lugs, it should be noted that. On the one hand, the use of technology should be comfortable and maneuverable enough. On the other hand, there is no doubt that the more massive the unit, the more reliable and practical it is. Obviously, with the help of heavy equipment, it is much more efficient to work on hard and heavy ground, while a light cultivator with similar tasks will cope with more difficulty and, of course, much less efficiently. But heavy machines also need heavy lugs.

For example, if the unit height is 310-700 mm, the corresponding width is 100-200 mm. If we are talking about Tiller Salute, the size of its wheels is as follows:

  • Diameter. 480-500 mm;
  • Width. 190-200 mm.

In accordance with these parameters, lugs are also made, the diameter and width of which must correspond to the above.

a tiller is an indispensable equipment and assistant in a personal household, but with the presence of appropriate attachments, its functionality is significantly expanded. Without lugs, it’s hard to imagine how vehicles could move on the ground.

Hillers

Among the additional equipment for the Salute tiller, hillers can be distinguished. of a conventional and disk type. A simple hiller allows you to form a furrow for future potato planting.

The disc hiller differs from the simple one in that its design provides two disc elements, which allows the device to huddle potatoes, as well as to cultivate the soil between the rows. Diameter of each disc. 40 cm.

Lugs. Specifications and Dimensions

The lugs for the Salute tiller allow you to make the distance between the rows of the required width. These devices can be used in combination with a plow, hiller, and potato diggers.

Grousers for working with a single-row hiller will cost about 3 thousand rubles.

Their technical characteristics:

  • Diameter. 28 cm;
  • Width. 9 cm;
  • Hub diameter. 3.4 cm.

Lugs for working with a plow will cost a little more. about 4-4.5 thousand rubles.

Their characteristics are as follows:

  • Diameter. 48 cm;
  • Hub diameter. 3 cm;
  • Width. 1.9 cm;
  • Total weight. 16 kg.

Optional equipment

Attachments for salute tillers are widespread not only, but also in the countries of the former Soviet Union. Kazakhstan, Belarus, etc. Due to the fact that the climatic conditions in these countries are almost identical, the tiller Salyut is in sufficient demand.

The snowy road is far from the best cover for cars, therefore, in a snowy area, it is necessary to use other modes of transport, which allow you to successfully move along such a road. By clicking on the link, get acquainted with the Varyag 550 snowmobile.

For spraying all kinds of fertilizers, various fertilizers and all kinds of chemicals to protect plants from harmful insects, it is not bad to have a special device. Here everything is in the characteristics of the Beetle sprayer.

tiller Salute and attachments to it, the of which you will learn a little later, is a fairly universal country “assistant” that can significantly simplify and reduce the time of work on the ground. This is evidenced by the list of works feasible for this unit:

  • Plowing land holdings;
  • Hilling beds;
  • Digging up potatoes and beets;
  • Hay making;
  • Snow removal in winter, etc.

You can also use the hay mower as a lawn mower in your backyard. It is only important to adjust the cutting height of the grass surface.

Having dealt with the work that the tiller is capable of carrying out, you can proceed to the description of those technical means that help to perform this work. In particular, attachments for the Salyut 5 tiller, as well as other models of the line.

READ  Petrol Champion Trimmer Which is Better

In total, there are several types of equipment that can be aggregated with Salyut tillers:

  • Lugs, etc.

Consider several types of attachments, as well as their approximate cost.

The KM-0.5 mower is able to cut short grass. Due to the high rotation frequency (up to 2400 rpm), this unit is capable of mulching quickly enough.

  • The width of the processed strip. 500mm;
  • Maximum speed. up to 4 km / h;
  • Height of mowed grass surface. up to 1000 mm;
  • Total weight. 35 kg.

.

Tillery Salute

Tillery Salyut, as well as Mole, Tarpan, Luch, Bison 6 hp, Niva, Carver, Champion, Plowman, Don, Forza Foreman were produced, which in itself means their adaptation to Russian conditions, where there is Not only cold temperature stretching for more than half years, but also the special characteristics of the soil.

To make it clearer, consider two models from the line of tillers data. Salyut 100 and Salyut 5.

Salute 100 appears to be an improved unit that has absorbed all the advantages of previous models, while correcting a design flaw.

Since the center of gravity is now focused on the front of the tiller, it has become more stable on the territory, so one cannot help but be afraid of the risk of the unit overturning.

The location of the gearshift lever has also become more convenient. If earlier it was placed on the gearbox, now the lever is located on the control handle itself, which greatly simplifies the control of the device.

Due to the fact that the tiller is easily disassembled, it can be freely transported in your car, and then reassembled, if necessary.

The new tiller has a 4-stroke engine running on regular AI-92 gasoline. At the same time, the maximum power of the engine used will reach a little less than 7.5 HP, with a fuel consumption of 1.5 liters per one hour of operation.

In principle, this is a pretty good indicator of economy for an engine of this power. In addition, you can install attachments for the Salyut 100 tiller, which will further increase its performance.

The design of the unit uses wheels with an increased diameter, which allows to significantly increase the performance of the tiller on the most difficult sections. Unlike previous models, the Salyut 100 tiller has been slightly expanded. It now includes the following devices:

  • Four cultivators;
  • Cutters;
  • Plant protection discs;
  • Coulter;
  • Oil dipstick;
  • Coupling for additional equipment.
  • The type of engine used. 4-stroke, gasoline;
  • Engine displacement. 196 cm3;
  • The brand of the engine used is Lifan 168F-2B;
  • Fuel tank capacity. 3.6 liters;
  • Gears. four forward and two back;
  • Maximum speed. up to 8 km / h;
  • The width of the processed strip. up to 98 cm;
  • Digging depth. 25 cm;
  • Unit length. 151 cm;
  • Unit width. 62 cm;
  • Unit height. 133.5 cm;
  • Total weight. 95 kg.

For more information about the work of the tiller Salyut 100, see:

The next representative of the model range is the tiller Salyut 5, which belongs to the small-sized category. The manufacturer recommends operating this unit at temperatures up to 400C, while use in cold weather is undesirable.

The unit is equipped with a 4-stroke gasoline engine (the design of this tiller uses a variety of motors, which are indicated in the accompanying technical passport of a particular unit). It is worth remembering that the first hours of operation are trial hours, when the engine gets used to the loads.

Therefore, it is necessary to gradually increase the digging depth, starting from the minimum value.

  • The type of engine used. 4-stroke, gasoline;
  • Engine displacement. 160 cm3;
  • Maximum power. 5.5 HP;
  • Engine used. Briggs&Stratton;
  • Fuel tank capacity. 3.5 liters;
  • Gears. two forward and one back;
  • The width of the processed strip. up to 90 cm;
  • Digging depth. 30 cm;
  • Unit length. 86 cm;
  • Unit width. 53 cm;
  • Unit height. 82 cm;
  • Total weight. 78 kg.

Additional models can be perfectly aggregated with these models. Equipment for tiller Salute, which significantly expands the boundaries of their use.

Functions

Lugs are made as universal, suitable for any brands of tilers, and specially adapted for a specific model. Some people manage to make such attachments on their own, Using old disks from the machine as a basis, however, the cost of such an assembly is more expensive than if it was purchased ready-made. Lugs are necessary, first of all, to:

  • To improve the quality of adhesion of the tiller to the soil on which you have to move;
  • The increase in the weight of the equipment, due to which it becomes more stable and can be used without fear on uneven surfaces, even when using a second heavy attachment;
  • With lugs provides additional soil processing;
  • the tiller can easily move uphill on soft ground.

To make the tiller as functional as possible, you need to purchase a model of attachments specifically for it. In this case, the unit becomes more efficient and economical. Sometimes lugs are supplied on sale, which are made of light alloy, their use on lightweight tillers is impractical, since the total weight should be above average. Higher quality, heavy ones are more expensive for the consumer, but they fully fulfill the assigned tasks.

Buying Tips

  • Height;
  • Diameter;
  • Width
  • The depth of entry of thorns into the soil.

It is the size that plays a leading role when buying. If the lugs are selected specifically for the model of equipment, then the choice must be approached more carefully in the absence of experience and knowledge. Consultation is always required, otherwise the purchase will NOT work. One of the most common tillers used by farmers is the “Neva”. The width of the attachment for this unit should be 430 mm. Metal plates that are immersed in the ground must have a height of 150 mm, this is exactly what is required to ensure the necessary quality of adhesion to the surface during operation.

On the Salyut tiller, the width of the element in question should reach 500 mm, while the depth of immersion of metal spikes on the surface is 200 mm. On MK-100 or MTZ-09, you can use a universal model. If we use heavier lugs, it becomes possible to attach more second attachments to the equipment, since its stability also increases.

It is equally important to take into account the type of soil, since it will be necessary to rely on it when choosing the shape of the welded thorns. Arrow-shaped metal plates are a universal option, since the adhesion point is made in the form of an angle, due to which the tiller can grab even on loose soil.

READ  How To Make A Plow On A Tiller

Most manufacturers of attachments in this category assume the use of additional weights. This is especially important when working on loose soil, where the equipment starts to slip and sinks more. Additional weight is a means that increases the operating efficiency of light vehicles. This product is presented in the form of small containers made of metal, if necessary, they are filled with sand, stones or other materials that are at hand.

Grousers for popular tillery

  • “Neva”. With this technique, it is best to use attachments from the KMS, since each element individually weighs 12 kilograms. The lug diameter is 460 mm, so the efficiency can be traced regardless of the type of soil. Also noteworthy are products under the KUM brand, they should be used when hilling or deep plowing.
  • “Salute” or “Agat”. The self-cleaning version from UralBenzoTech is ideal.
  • “Oka”. In this case, it is best to use attachments DN-500200.
  • Belarus 09Н and “Agros”. Products for this technique differ in the method of fastening, since the bent top should stand in the direction of movement. Quality products are produced by PF SMM.
  • Aurora. For this brand, it is best to use branded lugs for outdoor work.
  • “Mole”. The best equipment for machinery under this brand is produced by Mobil K. A special feature is the need for additional use of an extension cord.
  • “Patriot”. You can use S-24, S-31 MB and others for the tiller. The advantage of this technique is that it is NOT difficult to find attachments for it.
  • “Farmer”. It is allowed to use the Elitech 0401.000500 model, you can find products a little cheaper, since there are enough of them on the modern market. “Khutor”, “Viking”. “Favorite”.

Any of these models provides high-quality traction. If the user is trying to save money, then it is better to consult a specialist in more detail, as to whether the selected attachment is suitable for the equipment used. As a rule, lug manufacturers in the operating instructions prescribe the brands and models of tillers with which this product can be used.

Features of choosing a lug for a tiller

a tiller is an indispensable equipment and assistant in a personal household, but with the presence of appropriate attachments, its functionality is significantly expanded. Without lugs, it’s hard to imagine how vehicles could move on the ground.

Self-made from discs

You can make the lugs yourself, this will require old car rims. With the right approach to the process, such equipment turns out to be no less effective than purchased equipment, while it pleases with durability and efficiency. The manufacturing process may only seem complicated from the outside, in fact, it consists of the simplest stages.

  • First of all, the master welds plates made of metal to the Zhigulevsk discs from the outside.
  • In the second step, teeth are made. Steel will be required as the main material, since it is she who has the necessary qualities. The master needs to cut the blanks to size. The length will depend on the type of tiller, the heavier the technique, the longer the spikes should be. For heavy tillers, this parameter is 150 mm, medium 100 mm, and light 5 mm.
  • After manufacturing, the teeth are welded to the rim, while a distance of 150 mm must be maintained between them.

If you follow the requirements, the result will be a quality product. Increased adhesion is possible if weights are used. The installation of such attachments is carried out in the same way as for finished products, taking into account the design features of the tiller.

From below you can find out how to make do-it-yourself lugs for a tiller.

How to choose?

When buying a lug for a tiller or a car, you must choose the right size for the device. And if for a car it is quite simple to do this, and you just need to know the diameter of the wheels, then when choosing equipment for a tiller, you should also take into account the weight of the equipment. So, for heavy-duty models weighing more than 200 kg, it is recommended to purchase wide lugs with a diameter of at least 70 cm.For middle-class units weighing about 80 kg, it is better to choose devices with a diameter of 30 to 40 cm. For very light models weighing up to 50 kg, as well as narrow hooks 9 cm wide and 28 cm in diameter are suitable for motor cultivators.

The next selection criterion is the type of thorns. This can be wedge-shaped plates or a metal pin made from reinforcement on the rims, and on homemade models you can often see an angle welded at a certain angle.

Specifications and dimensions

Grousers for agricultural machinery are metal wheels or overhead Rims equipped with a powerful tread that goes deep into the ground and reliably adheres the equipment to the ground. Highly hardened steel is used as a material for their manufacture, due to which the devices are practically not subject to wear and are capable of lasting more than a dozen years. An important working parameter of lugs for tillers and mini tractors is their diameter and weight.

These indicators depend on how well the unit will perform its work on plowing the land, removing weeds, hilling various crops and removing snow. So, the minimum weight of the simplest metal wheels should not be less than 20 kg, otherwise the use of this equipment will lose its meaning, and the benefits from it will be minimal. If the lugs, often homemade, and do not reach the above standard, then they are used in combination with weighting agents, the presence of which provides the equipment with the necessary weight.

In addition to the weight of the lugs, size is also important. The diameter of the factory models ranges from 300 to 700 mm, and the width ranges from 100 to 200 mm. The most popular models are Patpiot 490001070 and a device for tillers “Celina”, “Cascade”, “Kadva” and “Neva”.

The dimensions of THESE devices are 400×180 and 480×190 mm, respectively. The models are suitable for most domestic machines and are used for plowing soft soils, removing weeds and cutting furrows. The Patriot S-24 model weighing 11 kg and measuring 390×120 mm is also popular. With its help, you can loosen the ground, fight weeds and remove snow. dimensional devices measuring 500×200 mm can be used in combination with a plow, and samples 700×130 mm are used with a Potato digger and flat cutters.

READ  Which Gasoline Is Poured Into The Stig Lawnmower

Grousers for motor cultivators have more modest dimensions than models for tillers. So, popular in domestic farmers “Tarpan” and “Neva” weigh only about 5 kg, have a diameter of 280 mm and a width of 90 mm. Such devices are used for loosening light soils and working with a single-row hiller.

Appointment

One of the most common uses for lugs is tillers and motor cultivators. And although some modern means of small mechanization have these devices in their basic configuration, more often they still have to be bought separately from the unit or made by hand.

Lugs are used in cases when it is necessary to increase the adhesion of the equipment to the soil and thereby increase its tractive effort and permeability. So, tillers equipped with lugs behave much more confidently on loose and clay soils and become more stable. This allows the tiller to perform fairly deep soil cultivation without the risk of getting bogged down or buried in the ground. In addition, the use of lugs for mini-tractors and cars significantly increases their cross-country ability in off-road or muddy conditions.

In a slightly modified form, the devices are used to secure the greenhouses more firmly on the ground, as well as to tie the wooden foundation to the soil. Construction lugs are arranged somewhat differently than wheel lugs, and are rods of metal reinforcement up to one meter long with a die welded at one end. To strengthen the structure, the rod is driven into the ground, and the Above-ground part is screwed to a wooden foundation or the base of the greenhouse. Due to the use of T-shaped lugs, buildings can withstand strong wind loads, as well as seasonal ground movements.

Varieties of lugs and their performance properties

Grousers are a popular type of attachment and are widely used in various spheres of human activity. The popularity of the device is due to its simple design, long service life, low cost and the possibility of self-manufacturing.

Varieties

The modern agricultural machinery market presents a wide selection of various wheel models, the classification of which is based on several criteria. The main criterion for distinguishing lugs is their design.

There are two types of wheel lugs.

The first is a product made in the form of one or more welded metal rims, equipped with cone-shaped spikes or angular plates welded at a certain angle. Such a structure is installed instead of the native wheels, and the fastening takes place using special brackets. The advantages of the species include high efficiency in the processing of the land, and good cross-country ability of the unit. The downside is the need to “change shoes” the tiller, which is a rather lengthy and time-consuming process.

The second type is represented by lugs, made in the form of metal nozzles, which are installed on top of ordinary wheels and do NOT require mounting on the tiller. Structurally, such models can be made in the form of chains or rims equipped with metal spikes. Outwardly, such remote models resemble conventional anti-slip chains for cars.

This type of lug is especially popular with SUV owners and has worked well on bumpy slushy roads with a lot of mud and clay. The advantage of this type of lug is quick installation and low cost in comparison with metal wheels. The disadvantages include a slightly lower cross-country ability and the need for additional use of weighting materials.

The next classification criterion is the compatibility of the lugs with different equipment. On this basis, special and universal devices are distinguished. And if the former are designed for a specific model of agricultural or road equipment, the latter are compatible with most of them, and can be installed on almost any unit. The advantage of specialized samples is a higher efficiency and versatility, and the advantages of station wagons include their practicality and the ability to use in relation to any technique. In addition, such models are much easier to sell if they are not needed.

Operating rules

For efficient and correct operation of the technique, the lugs must be correctly installed. To do this, they are put on the wheel shafts of the tiller and fixed with special brackets. When installing the hooks on the cultivators, they are placed on the gearbox shaft and secured with pins. If the lugs are selected and installed according to all the rules, then its spikes should not touch the parts of the unit, and when viewed from above, the tops of the wedge-shaped spikes will look forward in the direction of movement of the unit.

If the tiller or cultivator remains too light even after installing the lugs, then the installation of weights is necessary. When operating the unit equipped with any kind of hooks, it is strictly forbidden to drive onto an asphalt, metal or concrete surface.

Safety precautions must be observed when using lugs. To do this, before starting work, you need to carefully read the operating instructions, as well as check the serviceability of the engine and the reliability of the threaded connections of the unit.

Then it is recommended to walk along the treated area and remove mechanical debris, dry branches and large stones from its territory. And you also need to make sure that there are no electrical wires, metal cables and water hoses on the ground. And only after the field is prepared, you can start working.

When the vehicle moves in reverse, as well as when turning, it is necessary to be especially careful: during steep maneuvers, the spikes can turn a stone out of the ground, and no one knows where it will fly. This is especially true for powerful lugs with a large cleat height.

Upon completion of work, the lugs should be cleaned of soil residues and treated with universal grease or lithol. Store the devices in a dry ventilated area away from sources of moisture. With the right choice, careful operation and proper storage, the lugs do NOT fail for a very long time and serve their owners for many years.

How to choose the right lugs for a tiller, see the following.