Which Trimmer Is Gasoline Or Electric

Permanent care of a personal plot requires strength. The quality and comfort of work depend on the right choice of garden equipment. Trimmer. a device for mowing grass. It helps to trim the lawn and remove grass in hard to reach places (near buildings, a fence). The trimmer is a type of lawn mower, but has obvious advantages over it.

Differences between trimmer and lawn mower:

1. The trimmer has less weight.
2. It mows grass everywhere: near a fence, near flower beds, near buildings, under bushes and trees.
3. The device is maneuverable, it can be easily moved.

1. A tube;
2. A pen;
3. Engine;
4. Cutting element (fishing line, disc or knife);
5. Tank for gasoline (gasoline);
6. Cord (electric);
7. Additional nozzles.

Trimmers are electric and gasoline. Each of them has its advantages and disadvantages, which will be discussed later.

Electric

Equipped with an electric motor, powered by mains. The engine can be located on top or bottom of the rod. The upper location is more convenient, such devices have more power, you can mow wet grass, work in rainy weather.

1. The device operates from the network, in this case, filling gasoline and oil is not required.
2. It weighs less than gasoline models.
3. Turns on with the button.
4. Eco-friendly device, does not emit harmful exhaust fumes.
5. The noise level of such devices is lower.
6. There is a large selection of models.
7. They are cheaper than gas trimmers.
8. You can purchase additional nozzles (for trimming bushes, cutting undergrowth of trees).

Video: Which Trimmer Is Gasoline Or Electric

1. Dependence on electricity and cord length. Extension cords must be used during operation.
2. Unable to remove grass in remote areas.
3. Engine power is less than gasoline models. Such a trimmer will not mow thick stems of grass.
4. During prolonged use, it may overheat.
5. If the fishing line acts as a cutting element, it must be replaced when the reel ends.
6. If the engine is located below, do not mow wet grass. You can’t work in the rain.

Petrol

These models work on gasoline, which is poured into a special tank. It is also necessary to fill the oil so that all parts of the mechanism work.

Engine types

1. Push-pull. Such models are cheaper. To work, you need to add a certain amount of oil to gasoline. The engine design is simple. The quality of gasoline and oil does not affect its performance. Power is less than four-stroke.
2. Four stroke. These models are more expensive.. Gasoline and oil are poured separately into different containers, which facilitates the work. There is no need to measure the right amount of oil to add it to gasoline. Unlike two-stroke models, the engine design is complex, as the device is more powerful. If the mower breaks, it will be difficult to repair it yourself. Gardeners prefer models with such an engine.

1. Gasoline models are more powerful than electric ones;
2. Serve longer;
3. Independent of electricity;
4. Do not have a cord;
5. These models can be moved to any place and mow grass in remote places, even outside the suburban area.

1. Requires filling in gasoline and oil;
2. Noise level is higher;
3. Exhaust fumes are emitted;
4. A gas trimmer is heavier than an electric trimmer;
5. You can mow grass without frequent interruptions;
6. They cost more than electric models.

Trimmer selection

What should be guided when buying:

1. Choose engine type: electric or gasoline.
2. Decide on the power of the device.
3. Select a device with the engine location (top or bottom). For electric models.
4. Find out the volume of the fuel tank (gasoline).
5. Choose the shape of the handle (there are T-shaped or D-shaped).
6. Decide on the type of cutting tool (fishing line, metal or plastic knives, discs). Fishing line models are cheaper, but reels are required. Disks and knives made of metal last longer, do not require frequent replacement.

The quality of work and its convenience also depends on the following functional details:

1. The width of the strip that the device mows;
2. Cord length (electric);
3. Ease of use of the device;
4. Weight;
5. Security;
6. Appearance;
7. The presence of additional nozzles (if necessary);
8. The choice of manufacturer;
9. Price.