A gasoline braid for grass stalls when gas supply. Why is the lawn mower stall at idle

trimmer for grass gasoline sharply stalled and does not start

In order to most accurately determine the cause of the trimmer malfunction for grass of any brand (for example, echo) and find out the possibility of eliminating it, you need to install, when performing what action the device stalls. The engine can turn off both at idle and at high speeds, heated under load or immediately after starting and t.D.

If you stalled after starting

If the technique starts and stalls immediately after starting, this indicates the wrong settings or deducting the device. As a result of this, the fuel enters the engine unevenly, which leads to significant vibration and disconnecting the trimmer for the grass. To fix the breakdown, it is necessary to reconfigure the device according to the user management.

gasoline, braid, grass, stalls

Husqvarna Fuel Delivery Problem. Easy Fix

Another probable problem is the blockage of the valve supplying the gasoline mixture. It must be cleaned.

On a note! If the trimmer for the grass starts, but immediately stalls, it may also mean that the fuel is moving to the carburetor with difficulty. Weakening the valve will help to eliminate the problem. this will provide uniform and free circulation of fuel in the device.

Fixing A 6.25EX Mower from surgingUp and DownUp and Down

Another possible reason is the damaged fuel intake hose. Air can penetrate through cracks and holes into the system. To solve the problem, you need to increase the engine speed in order to get rid of air bubbles that have penetrated the device.

If you stalled after gas supply

Owners of gasoline braids often mention that the lawn mower stalls when you press the gas. Usually such a breakdown occurs due to problems in the carburetor. A failure in his work can occur due to long-term storage, use in difficult conditions, significant overload of the motor. The symptom of such a breakdown will be vibrating movements of the device during operation.

On a note! Users familiar with the repair of a car carburetor can try to restore this important node of the trimmer for the grass on their own, using the instructions for operating. Otherwise, the correct decision will be to seek help from the service center representatives.

Sometimes a trimmer for grass stalls when you give gas because the fuel valve is clogged. This interferes with the supply of gasoline. To eliminate the problem, it is enough to loosen the valve. Thus, normal supply of carburetor fuel will be restored.

Another possible reason why the lawn mower stalls when gas is supplied is pollution of the soundtress (check valve). This detail prevents the appearance of a vacuum in a gas tank. If it is clogged, the air does not flow, which means that fuel does not go to the carburetor. To eliminate the problem, it is necessary to clean this element.

Why does a trimmer for grass stall when you press the gas?

As you can see, the reasons why the trimmer for grass can stall when pressing for gas, a lot

That is why it is important to monitor the state of your assistant, to check the condition of all systems of the mechanism in time

Before you understand why any of the instruments of a summer house or a professional working with a motorcycle (benzocosa) stalls-it is worth distinguishing between two main situations when it happens. First, this is when the tool does not start after you have made the purchase, and the second. being in operation. So, we will analyze both.

  • After starting.The case stalls the case if the carburetor is incorrectly configured or it was swollen. Fuel is supplied unevenly, respectively, distinct vibrations occur.
  • When heated. The situation when the mechanism starts and works, but gradually “chokes” and stalls on the go. when gasoline boils in the carburetor, or the damper in the carburetor is not disk, but rotary view. In such cases, it is better to replace the carburetor itself. There is an air leakage option. when a coil or wire is broken in the ignition.
  • At high speeds. This also occurs from the rounding of the carburetor or clogging the lid on the gas tank. It is worth trying work with a slightly parted valve. Be sure to check the fuel intake hose. it can be a crackling or poorly attached to the base.
  • He is not gaining momentum. As the main reason why the engine is not gaining momentum. an air filter clogged. It is possible to subside a cable in a carburetor, a breakdown of a carburetor and the occurrence of problems with the motor drive mechanics.

There are times when the detail of the mechanism requires mandatory replacement, so we are always happy to offer spare parts for the lawn mower

It is important to understand that sometimes saving on minor elements can lead to a breakdown of such global components as a carburetor or engine. Therefore, competent operation and timely replacement of the necessary particles will provide you with full work with pleasure

A gasoline trimmer for grass is not started. 10 possible reasons

Before trying without the help of others to do the work of the tool, closely study the management of its operation. Maybe the information contained in it will stumble you upon a particular idea. When working in the load, the trimmer for the grass stalled and no longer starts.There is a spark.Gasoline acts. In an unpleasant case, you will have to find the cause of the malfunction by selection. Why doesn’t the lawn mower start: floods the spark plug, after winter, under load and other reasons for the breakdown of a gasoline trimmer for grass. It may be one of the subsequent:

  • The switch on the bar has not been transferred to the “v.””. This is one of the simple actions, but from time to time the brand new are blurrying to turn on the tool before starting it.
  • Similar errors include the lack of fuel in the tank. If the fuel ends, and you forgot about it, just pour into the tank (usually placed near the motor) AI-92 gasoline.
  • Absence, inappropriate mixture or incorrect proportion of oil for engines. In the standard, less than 50 g of oil should often be added. I don’t remember a trimmer for Homelite grass, it is chasing and starts to start poorly in the time. This will serve as an additional lubricant and will support the engine of your trimmer for grass in working condition. Also consider that oil is of various types (“synthetics”, “semi-synthetics”, “mineral water”)-they all affect the operation of the mechanism differently.
  • If a trimmer mowel for grass does not start after winter, drain fuel remaining in the gas tank and change it to the freshest. This is especially burning for small low.power trimmers with malhangic engines sensitive to poor consistency. In addition, during the winter, a precipitate can form on a gas tank day, which is due to which the tasks with the operation of the device appear.
  • Excessive swing of fuel can also become one of the circumstances that the trimmer for the grass has not stalled and does not start. Когда воздушная заслонка перекрыта, свечу заливает топливом. It should be turned and dried, and then stick in your place and try to launch the engine, holding the gas trigger. STIHL 180 chainsaw is not started? Reasons and decision! To date, the manufacturer of STIHL has a leading place among other companies that arbitrarily. It is better to check it for the presence between the electrodes of the sparks before that. If there is no spark, the candle should be changed.
  • Conclusions with the filter. trimmer for grass but not suitable for my case. Starts and works does not gain momentum. That a trimmer for grass does not start hot and even cold. If the lawn mower is not started. If your trimmer for the grass starts poorly, remove the air filter and run the tool without it. If everything happens, the filter should be changed to a new. As an option-painfully cleaning and blowing the old one, but the substitution will still have to be done at some point.
  • trimmer for the grass stalled and does not start? Try to clean the so.called Sapun. an element designed to smooth out pressure in the gas tank. Cleaning can be done with an ordinary long needle. The clogged sapun often becomes a prerequisite for a malfunction.
  • Knives are removed from the car. some models will not work under this condition.
  • Violation of density. You can check this using a pressure gauge. If the pressure begins to fall, you should find which of the parts of the carburetor is faulty. In most cases, carburetor laying wears out.
  • From time to time after a long period of work, you can see that the trimmer for the grass has overshadowed and does not start. Benzo trimmer for STIHL FS45 grass starts up and tried to start. Or not starting, MTD STC 55 P. Author. VO-1, you need to know that you should definitely take breaks. The amount of continuous work recommended for this model should be indicated in the annotation. You bought yourself a new gasoline trimmer for grass and in this case the lawn mower will not start or. Also, an overheating failure can lie in a faulty ignition coil or in the air cooling system, which prevents overheating.

Why will the chainsaw be stalled and zapayed when the gas is pressed

Chainsaws are quite reliable and simple design. Therefore, if you properly take care of them and process them on the basis of the recommendations of the manufacturer, then they fail, very rarely and various kinds of breakdowns are quickly eliminated. But if you are faced with this situation and want to personally repair your tool, without turning to the professionals for help, then we will delve into the information provided below.

In fact, it is unambiguous and accurately impossible to determine the reason why the tool does not start or stops when pressing gas, since a lot of factors affect this. But do not forget that, starting with the fact that the chainsaws are equipped with a simple two.stroke engine, conditions such as lubrication, fuel, sparks and air are important for its effective operation.

Therefore, the carburetor directly participates in the preparation of the fuel-air mixture, the filter cleans the air of dust, the ignition unit and the spark plug create a spark, and there is a lubricant in gasoline.

That is why you should look for the reasons for this kind of failure in a sequential order, starting directly with simple and gradually moving on to complex. And this is an important factor in the correct repair, since a person who, without hesitation begins to analyze the carburetor, leads him to risk. Since this type of unit should be repaired or adjusted directly in special workshops (read about the regulation of the carburetor).

There is no spark and chainsaw does not gain momentum

The chainsaw stops when pressing the gas due to the fact that neither spark. This can happen when there is no good contact between the tip of the candle and the wire (high voltage). However, if this type of connection works correctly, but there is still no spark, then the whole reason. This is an incendiary block (electronic)

It is important to note that details of this type cannot be repaired, so they can only be replaced

Do not forget that by studying the spark plug, you can get significant information about the breakdown of the chainsaw. Since if its surface is dry, then the reason for this is a cylinder, which is not directly included in the fuel. That’s why you will have to step by step by step by step by the entire spectrum of his presentation. If the candle is covered with black carbon, this means that the carburetor does not work properly, that is, it either supplies a lot of fuel or pours oil directly into gasoline.

If you put the cable instead of the fishing line, not having the opportunity to let it go, securely fix the two ends of the cable and cut them off with welding (a drop of molten metal prevents cable unturation). Such a tool clogs grass at a time. Cuts shoots in a thickness thick. Not so afraid of stones as a disc. However, there is a problem: when wear, pieces of cable threads break off, and these twisted wires remain at the place of mowing. The offensive on them can lead to injuries.

But pieces of cable left on the field. This is half the trouble. The fishing line for the trimmer, breaking off, weakens the dynamic shocks of transmission and engine, the cable does not give such an opportunity. Result. Quick wear of the brush.

Why is a Chinese lawn mower not developing momentum?

The trimmer for grass is gaining momentum, a very common problem and of course not always a familiar solution.

Also, the ignition coil can be broken in electrical equipment. In this case, the brush does not start or does not start and works with interruptions, and then stops, or does not start at all when hot.

You can check the serviceability of the coil in the same way as when checking the spark: unscrew the candle, lean it against the trimmer body for the grass. If there is no spark when you press the starter, or it appears each other, you need to change the coil.

Continuous work of the shieldcorse is indicated in the instructions for the trimmer for the grass. On average, kosim for 15-20 minutes, after which we turn off the trimmer for the grass and let it cool for 3-5 minutes. Weather conditions also affect the duration of continuous work. In hot weather, during skewing of high grass, thickets of weeds, under a large load, a trimmer for the grass overheats faster.

Many brush problems arise due to incorrectly prepared fuel mixture. In two.stroke engines, the lubricant is carried out with special oil (not ordinary engine oil!) Mixed with gasoline. If the oil does not mix with gasoline, the brush will quickly fail. Mix oil / gasoline in the proportion indicated in the instructions for the trimmer for grass. This is usually 1:40 or 1:50.

The question often arises: the proportion of 1:50 is how much oil and gasoline?

We identify the cause of the malfunction

To repair the lawn mower yourself, it is best to be guided by the principle of “from simple to complex”. First, check if there is enough gasoline in the tank. If the mower stopped starting after wintering, it is worth draining the old fuel and replace it with a new. Sometimes low.quality gasoline comes across, which can give a precipitate or even delay in the winter, and some gas mowers are very sensitive to fuel quality.

If there is confidence as gasoline, but the lawn mower does not show signs of life, the next thing you need to do is check the spark. To do this, remove the wire with a cap from the candle and twist it with a special candle key, which should go with the lawn mower. Then throw the cap on the candle, attach its threaded part to the metal part of the engine and ask someone to pull the starter. At this moment, a bright blue spark should appear, which is clearly noticeable even during the day. Keep in mind that you need to lean the candle against the clean metal surface of the engine, which is not covered with paint and which can be current.

What could break

Malfunctions with a benzocosa associated with the fact that this device is not started, in a certain way are classified by specialists of service services. They stand out malfunctions with the following nodes of the mechanism:

  • the engine in which the piston and bearings can be worn out or fail to crack the crankcase;
  • the fuel supply system, while it is possible to clog the filter or problems with the carburetor;
  • mechanical damage to wires, tubes, hoses;
  • The ignition chain.

To correctly determine the knot where the breakdown occurred, it is necessary to pay attention to the circumstances of the trimmer stalls for the grass.

Not starting a chainsaw on hot

There are no unnecessary phrases in the operating instructions, everything that is proposed is aimed at the trouble.free operation of the lawn mower. Cleaning all parts after each cycle of work contributes to the light removal of not hardened residues and dirt. You need to clean only cooled nodes. This technique contributes to the quality of the air cooling of the engine and the gearbox.

For refueling, it is necessary to use fuel with oil recommended in the instructions. If you leave the combustible mixture in the fuel tank, the oil will float and dies on the damper when starting, worsening its adjustment. The mixture can give a sediment and score fuel supply in the carburetor.

When preserving equipment for the winter, make an audit, grease the gearbox and the piston system, wrap the entire saw in the oiled rags and store in a dry place.

It is impossible, dangerous for the instrument and health of the mowing, use a metal cable instead of fishing line. It cuts more efficiently, but the load on the gearbox and the engine increases. A demolished piece of wire when separating flies at the speed of a bullet. Effective mowing can lead to a speedy wear of the piston group of the engine. For greater efficiency of the mowing, it is proposed to use the profile of the “Star” fishing line.

gasoline, braid, grass, stalls

It is impossible, dangerous for the instrument and health of the mowing, use a metal cable instead of fishing line. It cuts more efficiently, but the load on the gearbox and the engine increases. A demolished piece of wire when separating flies at the speed of a bullet. Why is it hot bad if the motor is poorly started on why a trimmer does not start for grass.

Carburetor adjustment and configuration

The maximum and minimum engine speeds, even idle is regulated by the carburetor. The stable operation of the lawn mower depends on the amount of fuel mixture and air. The lawn mower is not started with disturbed adjustment of the carburetor. The procedure for setting up the device for supplying fuel at low speeds (L), high speeds (H) and idle (T) is regulated by the same vints:

  • The chainsaw should work for at least 10 minutes, since the adjustment is carried out in hot.
  • The screw n is flooded smoothly to maximum speed, then turning on ¼, counterclockwise, reducing the speed of rotation of the engine shaft.
  • The idle stroke is regulated by the screw T, ensuring that the braid for the grass does not rotate.
  • The screw l is regulated, first opening the throttle as much as possible, and then smoothly reducing the speed to stable minimum.

After adjustment, a proper carburetor with cleaned filters should ensure the operation of the engine. In the event of a malfunction of the carburetor, after its repair, it will again need to configure the supply system before starting the lawn mower.

Rare breakdowns that prevent the operation of the lawn mower can be:

The most important malfunction, the elimination of which is associated with the replacement of the engine may be the failure of the piston group of the engine. The cost of repair will cost about 70% of the cost of the product. To figure out the reasons why the lawn mower is not starting up will help

The gasoline trimmer for the grass starts and stalls

Why is a trimmer not starting for grass gasoline? Reasons and their elimination

Recently, a gasoline trimmer for grass has acquired the status of one of the main tools in the arsenal of summer residents. And this is not surprising, because a motorized braid for grass allows you to quickly put a personal plot in order. However, sometimes it happens that the trimmer for the grass does not start hot and even on cold. In such situations, you have to independently establish the cause of the malfunction. Let’s find out what to do if a trimmer does not start for grass. The reasons that most often lead to such troubles will be considered further.

The lawn mower stalls

When purchasing a lawn mower, you must be prepared for the fact that, as in all other similar tools, breakdowns may also appear in it that will require repairs.

But do not immediately run to the service center and pay big funds to the craftsmen who convince you of the presence of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

Naturally, a rather harsh fault may be a prerequisite for this. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and from time to time it is even self.destructive.

In fact, circumstances, this is when lawn mower stalls at high speeds, there are a lot of these circumstances.

Trimmer for grass does not gain momentum, what to do?

1st launch of the latest lawn mower.Removed the grid from the silencer, began to work.

Another, this is the presence of malfunctions in the power system.

In this case, the lawn mower will stall at idle. The problems with the power system may lead to a drainage or incorrect carburetor adjustment.

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank lid just clogged or sticks.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall due to poor fuel flow into the carburetor

Why then the device starts up, ask you?

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. The problem may be that it is weak or cracked at all.

These are the main reasons why the gas mowl can stall.

In recent years, a gasoline trimmer for the grass has made the status of one book from the main tools in the arsenal of summer residents. And such an environment is logical, because a motorized braid for grass allows you to quickly put a personal plot in order. But with the form.

Why stalls the lawn mower: reasons and solutions

The reason why your tool abruptly stops working, namely the engine does not gain revolutions, breaks them off, or “stalls” in popularity, there may be more than one. Often this is to blame not only the engine itself, but also the adjacent systems, unit nodes, completely different details related to the preparation of the fuel-air mixture, its quality, transportation to the tool of the tool. Consider the most typical situations:

  • He is not gaining momentum. The engine drive mechanics may be damaged or there were problems with the carburetor, but the main reason should be considered clogging of the air filter. To change the situation, it must be removed, cleaned, and if it is no longer subject to the latter, then change for a new one, promptly making an order on our website. Also, there will not be a turn of the braid for grass, if the cable from the carburetor constantly flies. disassemble the unit and firmly fix it, or buy a new one if cracks are found on the element, other types of deformations.
  • At high speeds. The lid on the gas tank is clogged. it needs to be cleaned or new. often the reason is a sipped carb. We submit information on the correct adjustment of all screws in information articles. Check the quality of the fuel hose and change it to a new one if necessary.
  • When heated. It occurs in moments when the fuel in the carburetor literally boils. It can also appear in the options if the carba damper is more rare, rotary type (not disk). The only option would be to replace the carburetor with a new. There is another option for a broken wire or ignition coil. In this case, change the element of the latter.
  • Starts and stalls (immediately after launch). Solved or incorrectly adjusted carburetor is the main reason for this situation. Calm vibration will indicate an uneven supply of fuel, and competent adjustment of the node will help to correct the situation.

We hope you found the right answer to the question: why the lawn mower stalls, and all the proposed catalog details today, as always, are at your service. You need a piston trimmer for grass, a new carburetor, or the elements accompanying the operation of these systems. you will find everything in the open spaces of the Benzo SIP store.

This is interesting: how to choose a jacuzzi for the street?

Operating advice

It is worth paying attention to several recommendations for working with a benzoca or a trimmer, extending the service life of the device to several times.

  • As soon as you notice that the lawn mower or trimmer vibrates for the grass. immediately stop working and check the serviceability, performance of specific parts.
  • Valves adjustment and checking the work of pistons and cylinders, cleaning and changing the nozzles perform, starting from the requirements set forth in the user guide and the recommendations of the masters of service centers.
  • When air bubbles enter the system due to impaired fuel hose-give in to gas. With the combustion of gasoline with higher speeds of the gas bubbles motor will be less. But this is a temporary measure. As soon as possible, disassemble the unit and eliminate the cause of the suction of excess air.
  • Do not work as a unit in cold weather, not heating the engine. under load it can often stall. The effect here is the same as in the case when the driver in.40 started the car and immediately drove off, without waiting for the engine heating.
  • Do not leave the unit on the roadway. During the accident, the hit will immediately break, and this will make the purchase of a new unit for a forced measure. A car that has crashed into it at best will receive damage to the body and bumper.
  • Avoid working with a motorcycle or a trimmer in a downpour. Water getting along with air in the worst case can lead to engine explosion. Similar situations arose with cars.
  • Do not use unverified vehicles and lubricants. The mower warms up the engine more than it would do the car itself. when overheating, it will automatically lose its lubricants. It will turn into a burned out reagent. sticky, too viscous and viscous, like fuel oil. He will immediately stall (and drown out) the motor.
  • If the oil is old, previously merged from the tank of the machine or other (or the same) lawn mower (on a 4-stroke engine)-defend it, filter to clean from dirt and metal. But at the first opportunity, purchase fresh motor oil.
  • If the engine is two.stroke. observe the ratio of gasoline and oil. For compositions with mineral oils, this is approximately 34: 1, for semi.synthetics. 42: 1, for purely synthetic. 50: 1. Do not violate these proportions: “rewinded” gasoline will not burn out and quickly clog the engine, “under.appropriate”. will accelerate the wear of its mobile parts.
  • In terms of viscosity to winter classes, they include marking oils: SAE-0W/5W/10W/15W/20W/25W. To the summer-SAE-20/30/40/50/60. For example, SAE 10W-40 is already all-season oil (when working mowers from spring to autumn inclusive). Be sure to check with the manufacturer exactly what oil is needed.
  • Always use high.quality gasoline that has passed the manufacturer all stages of cleaning.
  • Recommended octane number of gasoline-AI-92/95/98. The use of the 76th can lead to a non-power of the engine by frequent stalling if you are poured, for example, the 76th or 80th gasoline.
  • If you are not sure of the independent solution of problems with a gas station (which does not gain move and often stalls)- call the master or contact the service center for repairing motor and garden equipment. Specialists do not get used to doing this work for you.

Read how to use a trimmer for grass video

Observing all these precautions, you will give your mower for many years of fruitful work, and yourself. the luxury of well.groomed lawns, comfort and convenience when mowing unnecessary vegetation in your site.

About the reasons why the lawn mower stall when you press gas, watch in the next video.

What could break

Malfunctions with a benzocosa associated with the fact that this device is not started, in a certain way are classified by specialists of service services. They stand out malfunctions with the following nodes of the mechanism:

  • the engine in which the piston and bearings can be worn out or fail to crack the crankcase;
  • the fuel supply system, while it is possible to clog the filter or problems with the carburetor;
  • mechanical damage to wires, tubes, hoses;
  • The ignition chain.

Malfunctions leading to improper operation of the chainsaw

There are a number of malfunctions that must be taken into account in diagnosis, t. to. They can lead to the interruptions of the saw.

  • Damage to the crankshaft bearings. With worn crankshaft bearings, the appearance of a beating on the main shaft is inevitable, where the flywheel is attached. In such a situation, it is impossible to adjust the gap between the flywheel and the ignition coil, which entails interruptions in sparking, and unstable work of the chainsaw.
  • Pollution of the pulse channel. The pulse channel serves to ensure the operation of the fuel pump, respectively, its pollution leads to improper operation of the pump, which will make it impossible to operate the saw (it will be launched and immediately stall).
  • Wear of the CPG. As a rule, with increased wear of CPH, a decrease in compression in the chainsaw engine is observed, which is necessarily affecting its ability to develop momentum.
  • Fuel and air filters pollution.

At idle

At single speeds, the common reasons for stopping a trimmer for grass are as follows:

  • reducing the speed of the gearbox when heating it, which is a consequence of the use of inappropriate fuel mixture;
  • clogging of the throttle;

If a carburetor is a problem place, then the technique will stop at the “cold” and with a “hot” launch.

What to do if the lawn mower starts and stalls?

Now we will consider all the above problems described in more detail.

In principle, the reasons why the engine of motorcycles stops working when pressing gas can be a huge number. Here we will consider only the most common.

Perhaps the air damper just clogged. And to eliminate the problem, it will be enough to simply clean the air damper. The engine also stalls due to the clogged air filter. To clean it, the filter should first be washed in the solvent, and then blow the stream of compressed air.

A similar procedure should be carried out with the clogged fuel filter, which prevents the intake of the fuel in the proper volume with an increase in engine speed.

The engine can stall for other reasons. Firstly, the spacer is worn between the cylinder and the carburetor, and secondly, the crankshaft oil seals began to suck in air.

gasoline, braid, grass, stalls

We have already indicated that in this case the problem is in the carburetor. In it, due to increased temperatures, gasoline begins to boil, which is why the air-fuel mixture ceases to form or its quality is critically reduced.

In addition, this problem may arise due to the fact that the carburetor is equipped with a rotary rather than a disk damper. If the problem has acquired a chronic character, then it should be solved radically. by buying a new carburetor with a disk barrier.

Most likely, access to the fuel tank is difficult or completely absent, which is why a reduced pressure zone is formed in it, due to which the engine stops receiving fuel in the required amount and because of this you stop working.

The engine at idle can stall for the following reasons:


LSI and began to prepare not quite normal gasoline solution, which is why they began to fall on the drum;

You will need spare parts to eliminate most problems, and the Well Part will be ready to provide them with the best cost to you.

The lawn mower stall when you press the gas, how to eliminate the breakdown

The reasons why the lawn mower stalls is a huge number, we offer the most common of them, and we hope that you will find your own, and, of course, eliminate it. So, one of the situations is to clog the air damper, then the hole behind which the fuel is sprayed. If something got into it, then it can most often be quickly and easy to remove. This is the simplest reason, like a clogged filter. It needs to be washed in the solvent, and then get it well with compressed air. If it is not subject to repair, then order a new one in spare parts from the Kosikos store.

Similarly, when you press the gas, the tool stalls because the drive has clogged. The following option is possible: the fuel does not come in full, so you need to check or replace the fuel filter. To other possible reasons, the stalled motorcycles, when you give gas, should be attributed:

To all these reasons for which the mechanism stalls when adding gas, we will add several useful recommendations for the treatment of a motorcycle. First of all, before starting working with any equipment, you need to read the instructions. In this case, an important role is played by the consistency of gasoline and oil, correctly prepared by you, and also not to overheat the unit, and not leave gasoline for the winter when you simply will not use the machine.

In the full work of any tool, an important role is played by the coordinated work of all its components. And if in one it is a fishing line for a trimmer for motorcycles, then in the other a piston or carburetor. Motokos owners who want to use their tools at full power, you need to understand that the load on which the capacity of the machine is not designed may simply break the entire mechanism or its individual parts. Therefore, only competent and moderate operation involves the long.term effective work of any benchmate tool.

The trimmer stalls for grass at idle. the causes and their solutions

To common situations why a trimmer for grass or a lawn mower stalls, it should be attributed to its work at idle. Let’s immediately move on to the reasons:

  • heating the gearbox and sleeping on the drum as a result of the fact that the gasoline solution is not prepared correctly. The required proportion is 1: 4;
  • carburetor pollution;
  • The throttle flashed;
  • When opening the damper (if the experiment was carried out), the air flow makes a mixture of the “poor”;
  • Ringing the carburetor;
  • clogging of the air filter;

The insufficient amount of fuel that you need to work as a gas tool will entail a situation when at high speeds, with an increase. a trimmer for grass works and stalls in idle. In a situation with a carburetor. the device will stall for a cold launch and “on hot”

For any user, Motokosa. Professional and Amator, it is important to understand that any tool problem can depend on the petty flying of the part, the release of fastening or clogging, as well as on the global breakdown of the important part of the mechanism

Despite all kinds of problems, your device, nevertheless, needs such an obligatory component as knives for motorcycle, without which the exploitation of braids for grass is simply impossible!

A gasoline trimmer for grass is a useful tool for cleaning from unnecessary grass of house territories and large area lawns. The design of this technique is quite complicated, therefore, if the device breaks, there may be several reasons. The most likely factors that have caught a breakdown are usually described in the user guide. Knowing why a trimmer for grass stalls, you can try to independently eliminate the defect. The most common malfunctions provoking the motorcycle stops, and the ability to repair them with your own hands is in the material further.

Where to start diagnostics motorcycles

If the lawn mower does not start or immediately stalls after starting, it is necessary to sequentially check all the main nodes and assemblies. The test algorithm is as follows:

  • Fuel tank (fuel quality);
  • Candle and candle channel;
  • Air filter;
  • Fuel filter;
  • Breather;
  • Graduation channel.

These nodes are most often source of basic problems, which can be eliminated after a thorough inspection.

Check the fuel mixture

Before starting the engine of a gasoline braid for grass, check the presence, and the quality of the fuel mixture. Do not save, do not greedy and “do not smarter” in this matter. The best light gasoline trimmer for grass

Repair or replacement of the piston group will cost you too much (sometimes up to 70% of the cost of a new tool). Prepare the oil fuel mixture strictly according to the instructions. Calculate its number from real needs. Excess gasoline left after work loses its qualities over time.

We diagnose a candle and candle canal

If the quality of the fuel mixture is not in doubt, and the lawn mower stalls when starting, then a flooded candle may be the reason. Here, a regular candle key is suitable for repair (every motorist has probably has a spare candle.

  • We twist the candle and wipe;
  • We thoroughly dry it (you should not bake it);
  • Excess fuel in the chamber we drain through the candle hole and dry it;
  • We clean the old candle from the carbon on a sugar or a ladies’ file;
  • We set a gap with a distance of 1 mm (you can check with any coin);
  • We return everything to place and try to start a trimmer for the grass.

Dry the channel at least 30-40 minutes. Otherwise, there is a risk of re.pour a new candle.

If the working candle is working, the nest, where it is located completely dry, and the lawn mower does not want to start, lubricate the threaded connection with gasoline. It should be slightly moisturized. No matter what wonderful spark gives out a candle, there is simply nothing to light up in a dry chamber.

If the trimmer engine for grass still does not start, such a cause as the lack of spark due to weak contact between candles and a high-voltage wire should be excluded. Lawn mowing trimmer for grass review comparison. If the connection is of high quality, and there are no sparks, most likely, you have “flew” the ignition unit. Here you can’t do without a master, t. to. The part is not repaired, but sold by a whole knot.

Repair Briggs Stratton Lawn

If the engine works is not clear how it starts up

not always, stalls under load. it’s time to make out.

,Glakes. PIF-PAF-PIKH, dripping gasoline from carburetor and other malfunctions on the lawn mowers

Diagnosis of the filters of the lawn mower

Another reason why the gasoline braid for grass stalls is an air filter. To exclude it, try to remove the filter and start a trimmer for grass without it. If it turns out, then you will have to change the air filter to a new one, or at least blow and carefully clean the old.

You can’t start a gasoline trimmer for grass due to contamination of the fuel filter. This is the next stage of our algorithm. Here we check the state of the filter element and, if necessary, change it with the new. When replacing, try not to leave a suction pipe without a filter, this is prohibited by any operating instructions. A braid for grass for grass gasoline

Stihl. Rush can turn into the repair of the piston group of the engine.

Often, “delicate” branded models of benzos are not launched and stall due. The main function of this element is to align the pressure in the gas tank. When clogging this node, a vacuum is created in the tank that prevents the supply of fuel. Eliminate the malfunction can be cleaned by cleaning the sounds. A trimmer does not start for Huter grass. You can use a regular needle for cleaning.

Normal work of cos with internal combustion engines can be disturbed due to dirt from the exhaust channel or clogging of the muffler grid. trimmer for grass gasoline STIHL does not start. There is such a problem on the models of the older generation. You can solve the issue with traditional cleaning and removal.

Trimmer for grass of gasoline does not work at idiral revolutions Evdiral.Ru

Petrol Trimmer for grass does not work at idle

When purchasing a gas cutting, you must be prepared for the fact that, as in all other similar tools, it may also seem breakdowns that will require repairs. But do not immediately run to the service center and pay huge funds to the craftsmen who will assure you in the presence of severe malfunctions in the device.

Perhaps a more common complaint associated with gasoline trimmers: “Gasoline trimmer for grass stalls”. Gasoline trimmer for grass: but he is not all. It works great like a bush. Naturally, a rather harsh fault may be a prerequisite for this. But almost always the situation is even easier than it seems to the 1st gaze. In order to cope with such a discrepancy, at first try to deal with its causes without third.party help, since, having found out the reason, it is even easier to fight with the inconsistency, and at times it is even self.destroyed.

In fact, when the bureau stalls at high speeds, there are a lot of such events. Another. The presence of flaws in the power system. Construction and repair that it just stalls, not on gasoline trimmers. In this case, the gasoline brush will stop at idle. The engine of the trimmer for the grass works quietly, the box does not really heat up even at idle. Problems with the power system may appear due to distortion or incorrect control of the carburetor. Inconsistency can be caused by vibrations that occur during the operation of bench cutting. Incorrect adjustment of a gasoline mowing can be corrected by simply adjusting it in agreement with the requirements indicated in the operational instructions.

  • The failure of the idle sensor;
  • A throttle is closed;
  • The failure of the throttle sensor of the throttle;
  • Dirty injector or carburetor
gasoline, braid, grass, stalls

The prerequisites of the breakdown can be completely different, therefore, when eliminating them, it will have to be operated on by various actions and techniques. If you have a significant driving experience behind you and you understand the features of the car as your 5 fingers, regardless of the model, then the elimination of this kind of troubles will not cause any troubles for you. And all since such breakdowns are simple and not serious. Why stall a trimmer for grass on a configured carburetor at idle. It follows that you can start a car without third.party help. Well, if the level of awareness or the shortcoming of free time does not give the ability to remove all the shortcomings without the help of others, it is better to seek help from knowledgeable people who will free you from nasty moments as soon as possible.

How to make the necessary repair

To eliminate problems, clean the throttle and make sure that the idle sensor and the throttle position sensor work correctly. Why does the chainsaw does not start or does not stop at idle? There are times when the chainsaw stalls at idle. If the work done did not bring the same results and difficulties again appear after the restart of the car, then it is worth resorting to constructive action. This means that you need to make a complete substitution of the failed equipment for you.

V. Car repair with faulty idle moves:

Each of the above events leads to the idle move of the motor. But the driver will be able to avoid such problems if he is closely watched by the state of his own car and his parts, which require constant care and preventive inspection.

Checking the filter

1st that must be checked. This is a fuel filter.

In some cases, a filter clogged with a mud cannot pass through a sufficient amount of fuel consistency. Accordingly, a fuel lack of fuel arises in the system, which leads to the fact that when pressing the gas rosopila, fuel is burning out, and the new one still does not have time to act, as a result of which stihl ci.rosopili kiosks. Also, with a clogged fuel filter, there may be a noticeable drop in the power of the chainsaw at the highest revolutions, but this is with insignificant pollution.

If the Stihl MC 100 chainsaw stalls eighty at idle, does not gain power when you press gas or even stalls at its entire speed, you need to diagnose the fuel system and check the density of the crankcase. You can do this without the help of others, but for this you need to have certain abilities. If you are not familiar with two.stroke saws, it is better to contact the specialists, because this technique is quite capricious, and the errors are expensive.